Commit 01d651d4 authored by Don Fry's avatar Don Fry Committed by Wey-Yi Guy

iwlwifi: move status definitions from iwl-shared

The code has been changed, move the definitions to the proper file
being used by the code.
Signed-off-by: default avatarDon Fry <donald.h.fry@intel.com>
Signed-off-by: default avatarWey-Yi Guy <wey-yi.w.guy@intel.com>
parent f8c6c6b5
......@@ -82,6 +82,24 @@ extern struct iwl_lib_ops iwl6030_lib;
/*****************************************************
* DRIVER STATUS FUNCTIONS
******************************************************/
#define STATUS_RF_KILL_HW 0
#define STATUS_CT_KILL 1
#define STATUS_ALIVE 2
#define STATUS_READY 3
#define STATUS_GEO_CONFIGURED 4
#define STATUS_EXIT_PENDING 5
#define STATUS_STATISTICS 6
#define STATUS_SCANNING 7
#define STATUS_SCAN_ABORTING 8
#define STATUS_SCAN_HW 9
#define STATUS_FW_ERROR 10
#define STATUS_CHANNEL_SWITCH_PENDING 11
#define STATUS_SCAN_COMPLETE 12
#define STATUS_POWER_PMI 13
struct iwl_ucode_capabilities;
extern struct ieee80211_ops iwlagn_hw_ops;
......
......@@ -185,28 +185,4 @@ const char *get_cmd_string(u8 cmd);
#define IWL_CMD(x) case x: return #x
/*****************************************************
* DRIVER STATUS FUNCTIONS
******************************************************/
#define STATUS_HCMD_ACTIVE 0 /* host command in progress */
/* 1 is unused (used to be STATUS_HCMD_SYNC_ACTIVE) */
#define STATUS_INT_ENABLED 2
#define STATUS_RF_KILL_HW 3
#define STATUS_CT_KILL 4
#define STATUS_INIT 5
#define STATUS_ALIVE 6
#define STATUS_READY 7
#define STATUS_TEMPERATURE 8
#define STATUS_GEO_CONFIGURED 9
#define STATUS_EXIT_PENDING 10
#define STATUS_STATISTICS 12
#define STATUS_SCANNING 13
#define STATUS_SCAN_ABORTING 14
#define STATUS_SCAN_HW 15
#define STATUS_POWER_PMI 16
#define STATUS_FW_ERROR 17
#define STATUS_DEVICE_ENABLED 18
#define STATUS_CHANNEL_SWITCH_PENDING 19
#define STATUS_SCAN_COMPLETE 20
#endif /* #__iwl_shared_h__ */
......@@ -278,6 +278,14 @@ struct iwl_trans_pcie {
unsigned long wd_timeout;
};
/*****************************************************
* DRIVER STATUS FUNCTIONS
******************************************************/
#define STATUS_HCMD_ACTIVE 0
#define STATUS_DEVICE_ENABLED 1
#define STATUS_TPOWER_PMI 2
#define STATUS_INT_ENABLED 3
#define IWL_TRANS_GET_PCIE_TRANS(_iwl_trans) \
((struct iwl_trans_pcie *) ((_iwl_trans)->trans_specific))
......
......@@ -150,7 +150,7 @@ void iwl_rx_queue_update_write_ptr(struct iwl_trans *trans,
IWL_TRANS_GET_PCIE_TRANS(trans);
/* If power-saving is in use, make sure device is awake */
if (test_bit(STATUS_POWER_PMI, &trans_pcie->status)) {
if (test_bit(STATUS_TPOWER_PMI, &trans_pcie->status)) {
reg = iwl_read32(trans, CSR_UCODE_DRV_GP1);
if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
......
......@@ -107,7 +107,7 @@ void iwl_txq_update_write_ptr(struct iwl_trans *trans, struct iwl_tx_queue *txq)
struct iwl_trans_pcie *trans_pcie =
IWL_TRANS_GET_PCIE_TRANS(trans);
/* if we're trying to save power */
if (test_bit(STATUS_POWER_PMI, &trans_pcie->status)) {
if (test_bit(STATUS_TPOWER_PMI, &trans_pcie->status)) {
/* wake up nic if it's powered down ...
* uCode will wake up, and interrupt us again, so next
* time we'll skip this part. */
......
......@@ -1253,7 +1253,7 @@ static void iwl_trans_pcie_stop_device(struct iwl_trans *trans)
clear_bit(STATUS_HCMD_ACTIVE, &trans_pcie->status);
clear_bit(STATUS_INT_ENABLED, &trans_pcie->status);
clear_bit(STATUS_DEVICE_ENABLED, &trans_pcie->status);
clear_bit(STATUS_POWER_PMI, &trans_pcie->status);
clear_bit(STATUS_TPOWER_PMI, &trans_pcie->status);
}
static void iwl_trans_pcie_wowlan_suspend(struct iwl_trans *trans)
......@@ -1574,9 +1574,9 @@ static void iwl_trans_pcie_set_pmi(struct iwl_trans *trans, bool state)
struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
if (state)
set_bit(STATUS_POWER_PMI, &trans_pcie->status);
set_bit(STATUS_TPOWER_PMI, &trans_pcie->status);
else
clear_bit(STATUS_POWER_PMI, &trans_pcie->status);
clear_bit(STATUS_TPOWER_PMI, &trans_pcie->status);
}
#ifdef CONFIG_PM_SLEEP
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment