Commit 0238aa54 authored by Marian Balakowicz's avatar Marian Balakowicz Committed by Grant Likely

[POWERPC] mpc5200: Add Promess Motion-PRO DTS

Add device tree source file for Promess Motion-PRO board.
Signed-off-by: default avatarMarian Balakowicz <m8@semihalf.com>
Signed-off-by: default avatarGrant Likely <grant.likely@secretlab.ca>
parent 8bd3b709
/*
* Motion-PRO board Device Tree Source
*
* Copyright (C) 2007 Semihalf
* Marian Balakowicz <m8@semihalf.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/*
* WARNING: Do not depend on this tree layout remaining static just yet.
* The MPC5200 device tree conventions are still in flux
* Keep an eye on the linuxppc-dev mailing list for more details
*/
/ {
model = "promess,motionpro";
compatible = "promess,motionpro";
#address-cells = <1>;
#size-cells = <1>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,5200@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <20>;
i-cache-line-size = <20>;
d-cache-size = <4000>; // L1, 16K
i-cache-size = <4000>; // L1, 16K
timebase-frequency = <0>; // from bootloader
bus-frequency = <0>; // from bootloader
clock-frequency = <0>; // from bootloader
};
};
memory {
device_type = "memory";
reg = <00000000 04000000>; // 64MB
};
soc5200@f0000000 {
model = "fsl,mpc5200b";
compatible = "fsl,mpc5200b";
revision = ""; // from bootloader
device_type = "soc";
ranges = <0 f0000000 0000c000>;
reg = <f0000000 00000100>;
bus-frequency = <0>; // from bootloader
system-frequency = <0>; // from bootloader
cdm@200 {
compatible = "mpc5200b-cdm","mpc5200-cdm";
reg = <200 38>;
};
mpc5200_pic: pic@500 {
// 5200 interrupts are encoded into two levels;
interrupt-controller;
#interrupt-cells = <3>;
compatible = "mpc5200b-pic","mpc5200-pic";
reg = <500 80>;
};
gpt@600 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <600 10>;
interrupts = <1 9 0>;
interrupt-parent = <&mpc5200_pic>;
fsl,has-wdt;
};
gpt@610 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <610 10>;
interrupts = <1 a 0>;
interrupt-parent = <&mpc5200_pic>;
};
gpt@620 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <620 10>;
interrupts = <1 b 0>;
interrupt-parent = <&mpc5200_pic>;
};
gpt@630 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <630 10>;
interrupts = <1 c 0>;
interrupt-parent = <&mpc5200_pic>;
};
gpt@640 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <640 10>;
interrupts = <1 d 0>;
interrupt-parent = <&mpc5200_pic>;
};
gpt@650 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <650 10>;
interrupts = <1 e 0>;
interrupt-parent = <&mpc5200_pic>;
};
motionpro-led@660 { // Motion-PRO status LED
compatible = "promess,motionpro-led";
label = "motionpro-statusled";
reg = <660 10>;
interrupts = <1 f 0>;
interrupt-parent = <&mpc5200_pic>;
blink-delay = <64>; // 100 msec
};
motionpro-led@670 { // Motion-PRO ready LED
compatible = "promess,motionpro-led";
label = "motionpro-readyled";
reg = <670 10>;
interrupts = <1 10 0>;
interrupt-parent = <&mpc5200_pic>;
};
rtc@800 { // Real time clock
compatible = "mpc5200b-rtc","mpc5200-rtc";
reg = <800 100>;
interrupts = <1 5 0 1 6 0>;
interrupt-parent = <&mpc5200_pic>;
};
mscan@980 {
compatible = "mpc5200b-mscan","mpc5200-mscan";
interrupts = <2 12 0>;
interrupt-parent = <&mpc5200_pic>;
reg = <980 80>;
};
gpio@b00 {
compatible = "mpc5200b-gpio","mpc5200-gpio";
reg = <b00 40>;
interrupts = <1 7 0>;
interrupt-parent = <&mpc5200_pic>;
};
gpio-wkup@c00 {
compatible = "mpc5200b-gpio-wkup","mpc5200-gpio-wkup";
reg = <c00 40>;
interrupts = <1 8 0 0 3 0>;
interrupt-parent = <&mpc5200_pic>;
};
spi@f00 {
compatible = "mpc5200b-spi","mpc5200-spi";
reg = <f00 20>;
interrupts = <2 d 0 2 e 0>;
interrupt-parent = <&mpc5200_pic>;
};
usb@1000 {
compatible = "mpc5200b-ohci","mpc5200-ohci","ohci-be";
reg = <1000 ff>;
interrupts = <2 6 0>;
interrupt-parent = <&mpc5200_pic>;
};
dma-controller@1200 {
compatible = "mpc5200b-bestcomm","mpc5200-bestcomm";
reg = <1200 80>;
interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
3 4 0 3 5 0 3 6 0 3 7 0
3 8 0 3 9 0 3 a 0 3 b 0
3 c 0 3 d 0 3 e 0 3 f 0>;
interrupt-parent = <&mpc5200_pic>;
};
xlb@1f00 {
compatible = "mpc5200b-xlb","mpc5200-xlb";
reg = <1f00 100>;
};
serial@2000 { // PSC1
device_type = "serial";
compatible = "mpc5200b-psc-uart","mpc5200-psc-uart";
port-number = <0>; // Logical port assignment
reg = <2000 100>;
interrupts = <2 1 0>;
interrupt-parent = <&mpc5200_pic>;
};
// PSC2 in spi master mode
spi@2200 { // PSC2
compatible = "mpc5200b-psc-spi","mpc5200-psc-spi";
cell-index = <1>;
reg = <2200 100>;
interrupts = <2 2 0>;
interrupt-parent = <&mpc5200_pic>;
};
// PSC5 in uart mode
serial@2800 { // PSC5
device_type = "serial";
compatible = "mpc5200b-psc-uart","mpc5200-psc-uart";
port-number = <4>; // Logical port assignment
reg = <2800 100>;
interrupts = <2 c 0>;
interrupt-parent = <&mpc5200_pic>;
};
ethernet@3000 {
device_type = "network";
compatible = "mpc5200b-fec","mpc5200-fec";
reg = <3000 800>;
local-mac-address = [ 00 00 00 00 00 00 ]; /* Filled in by U-Boot */
interrupts = <2 5 0>;
interrupt-parent = <&mpc5200_pic>;
};
ata@3a00 {
compatible = "mpc5200b-ata","mpc5200-ata";
reg = <3a00 100>;
interrupts = <2 7 0>;
interrupt-parent = <&mpc5200_pic>;
};
i2c@3d40 {
compatible = "mpc5200b-i2c","mpc5200-i2c","fsl-i2c";
reg = <3d40 40>;
interrupts = <2 10 0>;
interrupt-parent = <&mpc5200_pic>;
fsl5200-clocking;
};
sram@8000 {
compatible = "mpc5200b-sram","mpc5200-sram";
reg = <8000 4000>;
};
};
lpb {
model = "fsl,lpb";
compatible = "fsl,lpb";
#address-cells = <2>;
#size-cells = <1>;
ranges = <1 0 50000000 00010000
2 0 50010000 00010000
3 0 50020000 00010000>;
// 8-bit DualPort SRAM on LocalPlus Bus CS1
kollmorgen@1,0 {
compatible = "promess,motionpro-kollmorgen";
reg = <1 0 10000>;
interrupts = <1 1 0>;
interrupt-parent = <&mpc5200_pic>;
};
// 8-bit board CPLD on LocalPlus Bus CS2
cpld@2,0 {
compatible = "promess,motionpro-cpld";
reg = <2 0 10000>;
};
// 8-bit custom Anybus Module on LocalPlus Bus CS3
anybus@3,0 {
compatible = "promess,motionpro-anybus";
reg = <3 0 10000>;
};
pro_module_general@3,0 {
compatible = "promess,pro_module_general";
reg = <3 0 3>;
};
pro_module_dio@3,800 {
compatible = "promess,pro_module_dio";
reg = <3 800 2>;
};
};
pci@f0000d00 {
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
compatible = "mpc5200b-pci","mpc5200-pci";
reg = <f0000d00 100>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
c000 0 0 2 &mpc5200_pic 1 1 3
c000 0 0 3 &mpc5200_pic 1 2 3
c000 0 0 4 &mpc5200_pic 1 3 3
c800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
c800 0 0 2 &mpc5200_pic 1 2 3
c800 0 0 3 &mpc5200_pic 1 3 3
c800 0 0 4 &mpc5200_pic 0 0 3>;
clock-frequency = <0>; // From boot loader
interrupts = <2 8 0 2 9 0 2 a 0>;
interrupt-parent = <&mpc5200_pic>;
bus-range = <0 0>;
ranges = <42000000 0 80000000 80000000 0 20000000
02000000 0 a0000000 a0000000 0 10000000
01000000 0 00000000 b0000000 0 01000000>;
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment