Commit 026359bc authored by Tore Anderson's avatar Tore Anderson Committed by David S. Miller

ipv6: Send ICMPv6 RSes only when RAs are accepted

This patch improves the logic determining when to send ICMPv6 Router
Solicitations, so that they are 1) always sent when the kernel is
accepting Router Advertisements, and 2) never sent when the kernel is
not accepting RAs. In other words, the operational setting of the
"accept_ra" sysctl is used.

The change also makes the special "Hybrid Router" forwarding mode
("forwarding" sysctl set to 2) operate exactly the same as the standard
Router mode (forwarding=1). The only difference between the two was
that RSes was being sent in the Hybrid Router mode only. The sysctl
documentation describing the special Hybrid Router mode has therefore
been removed.

Rationale for the change:

Currently, the value of forwarding sysctl is the only thing determining
whether or not to send RSes. If it has the value 0 or 2, they are sent,
otherwise they are not. This leads to inconsistent behaviour in the
following cases:

* accept_ra=0, forwarding=0
* accept_ra=0, forwarding=2
* accept_ra=1, forwarding=2
* accept_ra=2, forwarding=1

In the first three cases, the kernel will send RSes, even though it will
not accept any RAs received in reply. In the last case, it will not send
any RSes, even though it will accept and process any RAs received. (Most
routers will send unsolicited RAs periodically, so suppressing RSes in
the last case will merely delay auto-configuration, not prevent it.)

Also, it is my opinion that having the forwarding sysctl control RS
sending behaviour (completely independent of whether RAs are being
accepted or not) is simply not what most users would intuitively expect
to be the case.
Signed-off-by: default avatarTore Anderson <tore@fud.no>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent c1aabdf3
......@@ -1045,6 +1045,11 @@ conf/interface/*:
accept_ra - BOOLEAN
Accept Router Advertisements; autoconfigure using them.
It also determines whether or not to transmit Router
Solicitations. If and only if the functional setting is to
accept Router Advertisements, Router Solicitations will be
transmitted.
Possible values are:
0 Do not accept Router Advertisements.
1 Accept Router Advertisements if forwarding is disabled.
......@@ -1115,14 +1120,14 @@ forwarding - BOOLEAN
Possible values are:
0 Forwarding disabled
1 Forwarding enabled
2 Forwarding enabled (Hybrid Mode)
FALSE (0):
By default, Host behaviour is assumed. This means:
1. IsRouter flag is not set in Neighbour Advertisements.
2. Router Solicitations are being sent when necessary.
2. If accept_ra is TRUE (default), transmit Router
Solicitations.
3. If accept_ra is TRUE (default), accept Router
Advertisements (and do autoconfiguration).
4. If accept_redirects is TRUE (default), accept Redirects.
......@@ -1133,16 +1138,10 @@ forwarding - BOOLEAN
This means exactly the reverse from the above:
1. IsRouter flag is set in Neighbour Advertisements.
2. Router Solicitations are not sent.
2. Router Solicitations are not sent unless accept_ra is 2.
3. Router Advertisements are ignored unless accept_ra is 2.
4. Redirects are ignored.
TRUE (2):
Hybrid mode. Same behaviour as TRUE, except for:
2. Router Solicitations are being sent when necessary.
Default: 0 (disabled) if global forwarding is disabled (default),
otherwise 1 (enabled).
......
......@@ -2996,12 +2996,12 @@ static void addrconf_dad_completed(struct inet6_ifaddr *ifp)
ipv6_ifa_notify(RTM_NEWADDR, ifp);
/* If added prefix is link local and forwarding is off,
start sending router solicitations.
/* If added prefix is link local and we are prepared to process
router advertisements, start sending router solicitations.
*/
if ((ifp->idev->cnf.forwarding == 0 ||
ifp->idev->cnf.forwarding == 2) &&
if (((ifp->idev->cnf.accept_ra == 1 && !ifp->idev->cnf.forwarding) ||
ifp->idev->cnf.accept_ra == 2) &&
ifp->idev->cnf.rtr_solicits > 0 &&
(dev->flags&IFF_LOOPBACK) == 0 &&
(ipv6_addr_type(&ifp->addr) & IPV6_ADDR_LINKLOCAL)) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment