phy: qcom-qmp-pcie: rework regs layout arrays

Use symbolic names for the values inside reg layout arrays.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221110192248.873973-4-dmitry.baryshkov@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

drivers/phy/qualcomm/phy-qcom-qmp-pcie.c

@@ -75,24 +75,24 @@ enum qphy_reg_layout {
 };
 
 static const unsigned int ipq_pciephy_gen3_regs_layout[QPHY_LAYOUT_SIZE] = {
-	[QPHY_SW_RESET]				= 0x00,
-	[QPHY_START_CTRL]			= 0x44,
-	[QPHY_PCS_STATUS]			= 0x14,
-	[QPHY_PCS_POWER_DOWN_CONTROL]		= 0x40,
+	[QPHY_SW_RESET]				= QPHY_V4_PCS_SW_RESET,
+	[QPHY_START_CTRL]			= QPHY_V4_PCS_START_CONTROL,
+	[QPHY_PCS_STATUS]			= QPHY_V4_PCS_PCS_STATUS1,
+	[QPHY_PCS_POWER_DOWN_CONTROL]		= QPHY_V4_PCS_POWER_DOWN_CONTROL,
 };
 
 static const unsigned int pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
-	[QPHY_SW_RESET]			= 0x00,
-	[QPHY_START_CTRL]		= 0x08,
-	[QPHY_PCS_STATUS]		= 0x174,
-	[QPHY_PCS_POWER_DOWN_CONTROL]	= 0x04,
+	[QPHY_SW_RESET]			= QPHY_V2_PCS_SW_RESET,
+	[QPHY_START_CTRL]		= QPHY_V2_PCS_START_CONTROL,
+	[QPHY_PCS_STATUS]		= QPHY_V2_PCS_PCI_PCS_STATUS,
+	[QPHY_PCS_POWER_DOWN_CONTROL]	= QPHY_V2_PCS_POWER_DOWN_CONTROL,
 };
 
 static const unsigned int sdm845_qmp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
-	[QPHY_SW_RESET]			= 0x00,
-	[QPHY_START_CTRL]		= 0x08,
-	[QPHY_PCS_STATUS]		= 0x174,
-	[QPHY_PCS_POWER_DOWN_CONTROL]	= 0x04,
+	[QPHY_SW_RESET]			= QPHY_V3_PCS_SW_RESET,
+	[QPHY_START_CTRL]		= QPHY_V3_PCS_START_CONTROL,
+	[QPHY_PCS_STATUS]		= QPHY_V3_PCS_PCS_STATUS,
+	[QPHY_PCS_POWER_DOWN_CONTROL]	= QPHY_V3_PCS_POWER_DOWN_CONTROL,
 };
 
 static const unsigned int sdm845_qhp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
@@ -103,10 +103,10 @@ static const unsigned int sdm845_qhp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
 };
 
 static const unsigned int sm8250_pcie_regs_layout[QPHY_LAYOUT_SIZE] = {
-	[QPHY_SW_RESET]			= 0x00,
-	[QPHY_START_CTRL]		= 0x44,
-	[QPHY_PCS_STATUS]		= 0x14,
-	[QPHY_PCS_POWER_DOWN_CONTROL]	= 0x40,
+	[QPHY_SW_RESET]			= QPHY_V4_PCS_SW_RESET,
+	[QPHY_START_CTRL]		= QPHY_V4_PCS_START_CONTROL,
+	[QPHY_PCS_STATUS]		= QPHY_V4_PCS_PCS_STATUS1,
+	[QPHY_PCS_POWER_DOWN_CONTROL]	= QPHY_V4_PCS_POWER_DOWN_CONTROL,
 };
 
 static const struct qmp_phy_init_tbl msm8998_pcie_serdes_tbl[] = {

drivers/phy/qualcomm/phy-qcom-qmp-pcs-v2.h

@@ -7,7 +7,9 @@
 #define QCOM_PHY_QMP_PCS_V2_H_
 
 /* Only for QMP V2 PHY - PCS registers */
+#define QPHY_V2_PCS_SW_RESET				0x000
 #define QPHY_V2_PCS_POWER_DOWN_CONTROL			0x004
+#define QPHY_V2_PCS_START_CONTROL			0x008
 #define QPHY_V2_PCS_TXDEEMPH_M6DB_V0			0x024
 #define QPHY_V2_PCS_TXDEEMPH_M3P5DB_V0			0x028
 #define QPHY_V2_PCS_TX_LARGE_AMP_DRV_LVL		0x034
@@ -43,4 +45,6 @@
 #define QPHY_V2_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB	0x1dc
 #define QPHY_V2_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB	0x1e0
 
+#define QPHY_V2_PCS_PCI_PCS_STATUS			0x174 /* PCI */
+
 #endif