[media] smiapp: Make PLL (quirk) flags a function

This is more flexible. Quirk flags may be affected by configuration.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

drivers/media/i2c/smiapp/smiapp-core.c

@@ -2617,8 +2617,8 @@ static int smiapp_registered(struct v4l2_subdev *subdev)
 	pll->bus_type = SMIAPP_PLL_BUS_TYPE_CSI2;
 	pll->csi2.lanes = sensor->platform_data->lanes;
 	pll->ext_clk_freq_hz = sensor->platform_data->ext_clk;
-	if (sensor->minfo.quirk)
-		pll->flags = sensor->minfo.quirk->pll_flags;
+	pll->flags = smiapp_call_quirk(sensor, pll_flags);
+
 	/* Profile 0 sensors have no separate OP clock branch. */
 	if (sensor->minfo.smiapp_profile == SMIAPP_PROFILE_0)
 		pll->flags |= SMIAPP_PLL_FLAG_NO_OP_CLOCKS;

drivers/media/i2c/smiapp/smiapp-quirk.c

@@ -220,12 +220,17 @@ static int jt8ev1_post_streamoff(struct smiapp_sensor *sensor)
 	return smiapp_write_8(sensor, 0x3328, 0x80);
 }
 
+static unsigned long jt8ev1_pll_flags(struct smiapp_sensor *sensor)
+{
+	return SMIAPP_PLL_FLAG_OP_PIX_CLOCK_PER_LANE;
+}
+
 const struct smiapp_quirk smiapp_jt8ev1_quirk = {
 	.limits = jt8ev1_limits,
 	.post_poweron = jt8ev1_post_poweron,
 	.pre_streamon = jt8ev1_pre_streamon,
 	.post_streamoff = jt8ev1_post_streamoff,
-	.pll_flags = SMIAPP_PLL_FLAG_OP_PIX_CLOCK_PER_LANE,
+	.pll_flags = jt8ev1_pll_flags,
 };
 
 static int tcm8500md_limits(struct smiapp_sensor *sensor)

drivers/media/i2c/smiapp/smiapp-quirk.h

@@ -41,8 +41,8 @@ struct smiapp_quirk {
 	int (*post_poweron)(struct smiapp_sensor *sensor);
 	int (*pre_streamon)(struct smiapp_sensor *sensor);
 	int (*post_streamoff)(struct smiapp_sensor *sensor);
+	unsigned long (*pll_flags)(struct smiapp_sensor *sensor);
 	unsigned long flags;
-	unsigned long pll_flags;
 };
 
 #define SMIAPP_QUIRK_FLAG_8BIT_READ_ONLY			(1 << 0)