Commit 03fbf488 authored by Jarkko Nikula's avatar Jarkko Nikula Committed by Mark Brown

spi: pxa2xx: Differentiate Intel LPSS types

Intel LPSS SPI properties differ between between platforms. Now private
registers offset 0x400 or 0x800 is autodetected but there is need to
support also other offset and handle a few other differences.

Prepare for that by splitting the LPSS_SSP type into compatible hardware
types and set it now based on PCI or ACPI ID. That type will be used to set
properties that differ between current and upcoming platforms.
Signed-off-by: default avatarJarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent b787f68c
......@@ -62,7 +62,7 @@ static struct pxa_spi_info spi_info_configs[] = {
.max_clk_rate = 3686400,
},
[PORT_BYT] = {
.type = LPSS_SSP,
.type = LPSS_BYT_SSP,
.port_id = 0,
.num_chipselect = 1,
.max_clk_rate = 50000000,
......@@ -70,7 +70,7 @@ static struct pxa_spi_info spi_info_configs[] = {
.rx_param = &byt_rx_param,
},
[PORT_BSW0] = {
.type = LPSS_SSP,
.type = LPSS_BYT_SSP,
.port_id = 0,
.num_chipselect = 1,
.max_clk_rate = 50000000,
......@@ -78,7 +78,7 @@ static struct pxa_spi_info spi_info_configs[] = {
.rx_param = &bsw0_rx_param,
},
[PORT_BSW1] = {
.type = LPSS_SSP,
.type = LPSS_BYT_SSP,
.port_id = 1,
.num_chipselect = 1,
.max_clk_rate = 50000000,
......@@ -86,7 +86,7 @@ static struct pxa_spi_info spi_info_configs[] = {
.rx_param = &bsw1_rx_param,
},
[PORT_BSW2] = {
.type = LPSS_SSP,
.type = LPSS_BYT_SSP,
.port_id = 2,
.num_chipselect = 1,
.max_clk_rate = 50000000,
......
......@@ -74,7 +74,13 @@ MODULE_ALIAS("platform:pxa2xx-spi");
static bool is_lpss_ssp(const struct driver_data *drv_data)
{
return drv_data->ssp_type == LPSS_SSP;
switch (drv_data->ssp_type) {
case LPSS_LPT_SSP:
case LPSS_BYT_SSP:
return true;
default:
return false;
}
}
static bool is_quark_x1000_ssp(const struct driver_data *drv_data)
......@@ -1085,7 +1091,8 @@ static int setup(struct spi_device *spi)
tx_hi_thres = 0;
rx_thres = RX_THRESH_QUARK_X1000_DFLT;
break;
case LPSS_SSP:
case LPSS_LPT_SSP:
case LPSS_BYT_SSP:
tx_thres = LPSS_TX_LOTHRESH_DFLT;
tx_hi_thres = LPSS_TX_HITHRESH_DFLT;
rx_thres = LPSS_RX_THRESH_DFLT;
......@@ -1242,6 +1249,18 @@ static void cleanup(struct spi_device *spi)
}
#ifdef CONFIG_ACPI
static struct acpi_device_id pxa2xx_spi_acpi_match[] = {
{ "INT33C0", LPSS_LPT_SSP },
{ "INT33C1", LPSS_LPT_SSP },
{ "INT3430", LPSS_LPT_SSP },
{ "INT3431", LPSS_LPT_SSP },
{ "80860F0E", LPSS_BYT_SSP },
{ "8086228E", LPSS_BYT_SSP },
{ },
};
MODULE_DEVICE_TABLE(acpi, pxa2xx_spi_acpi_match);
static struct pxa2xx_spi_master *
pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev)
{
......@@ -1249,12 +1268,19 @@ pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev)
struct acpi_device *adev;
struct ssp_device *ssp;
struct resource *res;
int devid;
const struct acpi_device_id *id;
int devid, type;
if (!ACPI_HANDLE(&pdev->dev) ||
acpi_bus_get_device(ACPI_HANDLE(&pdev->dev), &adev))
return NULL;
id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev);
if (id)
type = (int)id->driver_data;
else
return NULL;
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return NULL;
......@@ -1272,7 +1298,7 @@ pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev)
ssp->clk = devm_clk_get(&pdev->dev, NULL);
ssp->irq = platform_get_irq(pdev, 0);
ssp->type = LPSS_SSP;
ssp->type = type;
ssp->pdev = pdev;
ssp->port_id = -1;
......@@ -1285,16 +1311,6 @@ pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev)
return pdata;
}
static struct acpi_device_id pxa2xx_spi_acpi_match[] = {
{ "INT33C0", 0 },
{ "INT33C1", 0 },
{ "INT3430", 0 },
{ "INT3431", 0 },
{ "80860F0E", 0 },
{ "8086228E", 0 },
{ },
};
MODULE_DEVICE_TABLE(acpi, pxa2xx_spi_acpi_match);
#else
static inline struct pxa2xx_spi_master *
pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev)
......
......@@ -194,8 +194,9 @@ enum pxa_ssp_type {
PXA168_SSP,
PXA910_SSP,
CE4100_SSP,
LPSS_SSP,
QUARK_X1000_SSP,
LPSS_LPT_SSP,
LPSS_BYT_SSP,
};
struct ssp_device {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment