Commit 04497982 authored by Divy Le Ray's avatar Divy Le Ray Committed by David S. Miller

cxgb3: simplify port type struct and usage

Second step in overall phy layer reorganization.
Clean up the port_type_info structure.
Support coextistence of clause 22 and clause 45 MDIO devices.
Select the type of MDIO transaction on a per transaction basis.
Signed-off-by: default avatarDivy Le Ray <divy@chelsio.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 78e4689e
......@@ -54,7 +54,6 @@ struct port_info {
struct adapter *adapter;
struct vlan_group *vlan_grp;
struct sge_qset *qs;
const struct port_type_info *port_type;
u8 port_id;
u8 rx_csum_offload;
u8 nqsets;
......@@ -282,6 +281,7 @@ int t3_offload_tx(struct t3cdev *tdev, struct sk_buff *skb);
void t3_os_ext_intr_handler(struct adapter *adapter);
void t3_os_link_changed(struct adapter *adapter, int port_id, int link_status,
int speed, int duplex, int fc);
void t3_os_phymod_changed(struct adapter *adap, int port_id);
void t3_sge_start(struct adapter *adap);
void t3_sge_stop(struct adapter *adap);
......
......@@ -122,7 +122,9 @@ static struct cphy_ops ael1002_ops = {
int t3_ael1002_phy_prep(struct cphy *phy, struct adapter *adapter,
int phy_addr, const struct mdio_ops *mdio_ops)
{
cphy_init(phy, adapter, phy_addr, &ael1002_ops, mdio_ops);
cphy_init(phy, adapter, phy_addr, &ael1002_ops, mdio_ops,
SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_FIBRE,
"10GBASE-R");
ael100x_txon(phy);
return 0;
}
......@@ -178,7 +180,9 @@ static struct cphy_ops ael1006_ops = {
int t3_ael1006_phy_prep(struct cphy *phy, struct adapter *adapter,
int phy_addr, const struct mdio_ops *mdio_ops)
{
cphy_init(phy, adapter, phy_addr, &ael1006_ops, mdio_ops);
cphy_init(phy, adapter, phy_addr, &ael1006_ops, mdio_ops,
SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_FIBRE,
"10GBASE-SR");
ael100x_txon(phy);
return 0;
}
......@@ -198,7 +202,9 @@ int t3_qt2045_phy_prep(struct cphy *phy, struct adapter *adapter,
{
unsigned int stat;
cphy_init(phy, adapter, phy_addr, &qt2045_ops, mdio_ops);
cphy_init(phy, adapter, phy_addr, &qt2045_ops, mdio_ops,
SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_TP,
"10GBASE-CX4");
/*
* Some cards where the PHY is supposed to be at address 0 actually
......@@ -256,6 +262,8 @@ static struct cphy_ops xaui_direct_ops = {
int t3_xaui_direct_phy_prep(struct cphy *phy, struct adapter *adapter,
int phy_addr, const struct mdio_ops *mdio_ops)
{
cphy_init(phy, adapter, phy_addr, &xaui_direct_ops, mdio_ops);
cphy_init(phy, adapter, phy_addr, &xaui_direct_ops, mdio_ops,
SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_TP,
"10GBASE-CX4");
return 0;
}
......@@ -193,8 +193,6 @@ struct mdio_ops {
struct adapter_info {
unsigned char nports; /* # of ports */
unsigned char phy_base_addr; /* MDIO PHY base address */
unsigned char mdien;
unsigned char mdiinv;
unsigned int gpio_out; /* GPIO output settings */
unsigned int gpio_intr; /* GPIO IRQ enable mask */
unsigned long caps; /* adapter capabilities */
......@@ -202,13 +200,6 @@ struct adapter_info {
const char *desc; /* product description */
};
struct port_type_info {
int (*phy_prep)(struct cphy *phy, struct adapter *adapter,
int phy_addr, const struct mdio_ops *ops);
unsigned int caps;
const char *desc;
};
struct mc5_stats {
unsigned long parity_err;
unsigned long active_rgn_full;
......@@ -548,7 +539,6 @@ enum {
/* PHY operations */
struct cphy_ops {
void (*destroy)(struct cphy *phy);
int (*reset)(struct cphy *phy, int wait);
int (*intr_enable)(struct cphy *phy);
......@@ -569,8 +559,10 @@ struct cphy_ops {
/* A PHY instance */
struct cphy {
int addr; /* PHY address */
int addr; /* PHY address */
unsigned int caps; /* PHY capabilities */
struct adapter *adapter; /* associated adapter */
const char *desc; /* PHY description */
unsigned long fifo_errors; /* FIFO over/under-flows */
const struct cphy_ops *ops; /* PHY operations */
int (*mdio_read)(struct adapter *adapter, int phy_addr, int mmd_addr,
......@@ -595,10 +587,13 @@ static inline int mdio_write(struct cphy *phy, int mmd, int reg,
/* Convenience initializer */
static inline void cphy_init(struct cphy *phy, struct adapter *adapter,
int phy_addr, struct cphy_ops *phy_ops,
const struct mdio_ops *mdio_ops)
const struct mdio_ops *mdio_ops,
unsigned int caps, const char *desc)
{
phy->adapter = adapter;
phy->addr = phy_addr;
phy->caps = caps;
phy->adapter = adapter;
phy->desc = desc;
phy->ops = phy_ops;
if (mdio_ops) {
phy->mdio_read = mdio_ops->read;
......
......@@ -2368,7 +2368,7 @@ static void check_link_status(struct adapter *adapter)
struct net_device *dev = adapter->port[i];
struct port_info *p = netdev_priv(dev);
if (!(p->port_type->caps & SUPPORTED_IRQ) && netif_running(dev))
if (!(p->phy.caps & SUPPORTED_IRQ) && netif_running(dev))
t3_link_changed(adapter, i);
}
}
......@@ -2731,7 +2731,7 @@ static void __devinit print_port_info(struct adapter *adap,
if (!test_bit(i, &adap->registered_device_map))
continue;
printk(KERN_INFO "%s: %s %s %sNIC (rev %d) %s%s\n",
dev->name, ai->desc, pi->port_type->desc,
dev->name, ai->desc, pi->phy.desc,
is_offload(adap) ? "R" : "", adap->params.rev, buf,
(adap->flags & USING_MSIX) ? " MSI-X" :
(adap->flags & USING_MSI) ? " MSI" : "");
......
......@@ -194,21 +194,18 @@ int t3_mc7_bd_read(struct mc7 *mc7, unsigned int start, unsigned int n,
static void mi1_init(struct adapter *adap, const struct adapter_info *ai)
{
u32 clkdiv = adap->params.vpd.cclk / (2 * adap->params.vpd.mdc) - 1;
u32 val = F_PREEN | V_MDIINV(ai->mdiinv) | V_MDIEN(ai->mdien) |
V_CLKDIV(clkdiv);
u32 val = F_PREEN | V_CLKDIV(clkdiv);
if (!(ai->caps & SUPPORTED_10000baseT_Full))
val |= V_ST(1);
t3_write_reg(adap, A_MI1_CFG, val);
}
#define MDIO_ATTEMPTS 10
#define MDIO_ATTEMPTS 20
/*
* MI1 read/write operations for direct-addressed PHYs.
* MI1 read/write operations for clause 22 PHYs.
*/
static int mi1_read(struct adapter *adapter, int phy_addr, int mmd_addr,
int reg_addr, unsigned int *valp)
static int t3_mi1_read(struct adapter *adapter, int phy_addr, int mmd_addr,
int reg_addr, unsigned int *valp)
{
int ret;
u32 addr = V_REGADDR(reg_addr) | V_PHYADDR(phy_addr);
......@@ -217,16 +214,17 @@ static int mi1_read(struct adapter *adapter, int phy_addr, int mmd_addr,
return -EINVAL;
mutex_lock(&adapter->mdio_lock);
t3_set_reg_field(adapter, A_MI1_CFG, V_ST(M_ST), V_ST(1));
t3_write_reg(adapter, A_MI1_ADDR, addr);
t3_write_reg(adapter, A_MI1_OP, V_MDI_OP(2));
ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0, MDIO_ATTEMPTS, 20);
ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0, MDIO_ATTEMPTS, 10);
if (!ret)
*valp = t3_read_reg(adapter, A_MI1_DATA);
mutex_unlock(&adapter->mdio_lock);
return ret;
}
static int mi1_write(struct adapter *adapter, int phy_addr, int mmd_addr,
static int t3_mi1_write(struct adapter *adapter, int phy_addr, int mmd_addr,
int reg_addr, unsigned int val)
{
int ret;
......@@ -236,19 +234,37 @@ static int mi1_write(struct adapter *adapter, int phy_addr, int mmd_addr,
return -EINVAL;
mutex_lock(&adapter->mdio_lock);
t3_set_reg_field(adapter, A_MI1_CFG, V_ST(M_ST), V_ST(1));
t3_write_reg(adapter, A_MI1_ADDR, addr);
t3_write_reg(adapter, A_MI1_DATA, val);
t3_write_reg(adapter, A_MI1_OP, V_MDI_OP(1));
ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0, MDIO_ATTEMPTS, 20);
ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0, MDIO_ATTEMPTS, 10);
mutex_unlock(&adapter->mdio_lock);
return ret;
}
static const struct mdio_ops mi1_mdio_ops = {
mi1_read,
mi1_write
t3_mi1_read,
t3_mi1_write
};
/*
* Performs the address cycle for clause 45 PHYs.
* Must be called with the MDIO_LOCK held.
*/
static int mi1_wr_addr(struct adapter *adapter, int phy_addr, int mmd_addr,
int reg_addr)
{
u32 addr = V_REGADDR(mmd_addr) | V_PHYADDR(phy_addr);
t3_set_reg_field(adapter, A_MI1_CFG, V_ST(M_ST), 0);
t3_write_reg(adapter, A_MI1_ADDR, addr);
t3_write_reg(adapter, A_MI1_DATA, reg_addr);
t3_write_reg(adapter, A_MI1_OP, V_MDI_OP(0));
return t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0,
MDIO_ATTEMPTS, 10);
}
/*
* MI1 read/write operations for indirect-addressed PHYs.
*/
......@@ -256,17 +272,13 @@ static int mi1_ext_read(struct adapter *adapter, int phy_addr, int mmd_addr,
int reg_addr, unsigned int *valp)
{
int ret;
u32 addr = V_REGADDR(mmd_addr) | V_PHYADDR(phy_addr);
mutex_lock(&adapter->mdio_lock);
t3_write_reg(adapter, A_MI1_ADDR, addr);
t3_write_reg(adapter, A_MI1_DATA, reg_addr);
t3_write_reg(adapter, A_MI1_OP, V_MDI_OP(0));
ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0, MDIO_ATTEMPTS, 20);
ret = mi1_wr_addr(adapter, phy_addr, mmd_addr, reg_addr);
if (!ret) {
t3_write_reg(adapter, A_MI1_OP, V_MDI_OP(3));
ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0,
MDIO_ATTEMPTS, 20);
MDIO_ATTEMPTS, 10);
if (!ret)
*valp = t3_read_reg(adapter, A_MI1_DATA);
}
......@@ -278,18 +290,14 @@ static int mi1_ext_write(struct adapter *adapter, int phy_addr, int mmd_addr,
int reg_addr, unsigned int val)
{
int ret;
u32 addr = V_REGADDR(mmd_addr) | V_PHYADDR(phy_addr);
mutex_lock(&adapter->mdio_lock);
t3_write_reg(adapter, A_MI1_ADDR, addr);
t3_write_reg(adapter, A_MI1_DATA, reg_addr);
t3_write_reg(adapter, A_MI1_OP, V_MDI_OP(0));
ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0, MDIO_ATTEMPTS, 20);
ret = mi1_wr_addr(adapter, phy_addr, mmd_addr, reg_addr);
if (!ret) {
t3_write_reg(adapter, A_MI1_DATA, val);
t3_write_reg(adapter, A_MI1_OP, V_MDI_OP(1));
ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0,
MDIO_ATTEMPTS, 20);
MDIO_ATTEMPTS, 10);
}
mutex_unlock(&adapter->mdio_lock);
return ret;
......@@ -435,22 +443,22 @@ int t3_set_phy_speed_duplex(struct cphy *phy, int speed, int duplex)
}
static const struct adapter_info t3_adap_info[] = {
{2, 0, 0, 0,
{2, 0,
F_GPIO2_OEN | F_GPIO4_OEN |
F_GPIO2_OUT_VAL | F_GPIO4_OUT_VAL, F_GPIO3 | F_GPIO5,
0,
&mi1_mdio_ops, "Chelsio PE9000"},
{2, 0, 0, 0,
{2, 0,
F_GPIO2_OEN | F_GPIO4_OEN |
F_GPIO2_OUT_VAL | F_GPIO4_OUT_VAL, F_GPIO3 | F_GPIO5,
0,
&mi1_mdio_ops, "Chelsio T302"},
{1, 0, 0, 0,
{1, 0,
F_GPIO1_OEN | F_GPIO6_OEN | F_GPIO7_OEN | F_GPIO10_OEN |
F_GPIO11_OEN | F_GPIO1_OUT_VAL | F_GPIO6_OUT_VAL | F_GPIO10_OUT_VAL,
0, SUPPORTED_10000baseT_Full | SUPPORTED_AUI,
&mi1_mdio_ext_ops, "Chelsio T310"},
{2, 0, 0, 0,
{2, 0,
F_GPIO1_OEN | F_GPIO2_OEN | F_GPIO4_OEN | F_GPIO5_OEN | F_GPIO6_OEN |
F_GPIO7_OEN | F_GPIO10_OEN | F_GPIO11_OEN | F_GPIO1_OUT_VAL |
F_GPIO5_OUT_VAL | F_GPIO6_OUT_VAL | F_GPIO10_OUT_VAL, 0,
......@@ -467,29 +475,23 @@ const struct adapter_info *t3_get_adapter_info(unsigned int id)
return id < ARRAY_SIZE(t3_adap_info) ? &t3_adap_info[id] : NULL;
}
#define CAPS_1G (SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Full | \
SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg | SUPPORTED_MII)
#define CAPS_10G (SUPPORTED_10000baseT_Full | SUPPORTED_AUI)
struct port_type_info {
int (*phy_prep)(struct cphy *phy, struct adapter *adapter,
int phy_addr, const struct mdio_ops *ops);
};
static const struct port_type_info port_types[] = {
{NULL},
{t3_ael1002_phy_prep, CAPS_10G | SUPPORTED_FIBRE,
"10GBASE-XR"},
{t3_vsc8211_phy_prep, CAPS_1G | SUPPORTED_TP | SUPPORTED_IRQ,
"10/100/1000BASE-T"},
{NULL, CAPS_1G | SUPPORTED_TP | SUPPORTED_IRQ,
"10/100/1000BASE-T"},
{t3_xaui_direct_phy_prep, CAPS_10G | SUPPORTED_TP, "10GBASE-CX4"},
{NULL, CAPS_10G, "10GBASE-KX4"},
{t3_qt2045_phy_prep, CAPS_10G | SUPPORTED_TP, "10GBASE-CX4"},
{t3_ael1006_phy_prep, CAPS_10G | SUPPORTED_FIBRE,
"10GBASE-SR"},
{NULL, CAPS_10G | SUPPORTED_TP, "10GBASE-CX4"},
{ NULL },
{ t3_ael1002_phy_prep },
{ t3_vsc8211_phy_prep },
{ NULL},
{ t3_xaui_direct_phy_prep },
{ NULL },
{ t3_qt2045_phy_prep },
{ t3_ael1006_phy_prep },
{ NULL },
};
#undef CAPS_1G
#undef CAPS_10G
#define VPD_ENTRY(name, len) \
u8 name##_kword[2]; u8 name##_len; u8 name##_data[len]
......@@ -1691,7 +1693,7 @@ int t3_phy_intr_handler(struct adapter *adapter)
mask = gpi - (gpi & (gpi - 1));
gpi -= mask;
if (!(p->port_type->caps & SUPPORTED_IRQ))
if (!(p->phy.caps & SUPPORTED_IRQ))
continue;
if (cause & mask) {
......@@ -3556,7 +3558,7 @@ int t3_prep_adapter(struct adapter *adapter, const struct adapter_info *ai,
int reset)
{
int ret;
unsigned int i, j = 0;
unsigned int i, j = -1;
get_pci_mode(adapter, &adapter->params.pci);
......@@ -3620,19 +3622,18 @@ int t3_prep_adapter(struct adapter *adapter, const struct adapter_info *ai,
for_each_port(adapter, i) {
u8 hw_addr[6];
const struct port_type_info *pti;
struct port_info *p = adap2pinfo(adapter, i);
while (!adapter->params.vpd.port_type[j])
++j;
while (!adapter->params.vpd.port_type[++j])
;
p->port_type = &port_types[adapter->params.vpd.port_type[j]];
ret = p->port_type->phy_prep(&p->phy, adapter,
ai->phy_base_addr + j,
ai->mdio_ops);
pti = &port_types[adapter->params.vpd.port_type[j]];
ret = pti->phy_prep(&p->phy, adapter, ai->phy_base_addr + j,
ai->mdio_ops);
if (ret)
return ret;
mac_prep(&p->mac, adapter, j);
++j;
/*
* The VPD EEPROM stores the base Ethernet address for the
......@@ -3646,9 +3647,9 @@ int t3_prep_adapter(struct adapter *adapter, const struct adapter_info *ai,
ETH_ALEN);
memcpy(adapter->port[i]->perm_addr, hw_addr,
ETH_ALEN);
init_link_config(&p->link_config, p->port_type->caps);
init_link_config(&p->link_config, p->phy.caps);
p->phy.ops->power_down(&p->phy, 1);
if (!(p->port_type->caps & SUPPORTED_IRQ))
if (!(p->phy.caps & SUPPORTED_IRQ))
adapter->params.linkpoll_period = 10;
}
......@@ -3664,7 +3665,7 @@ void t3_led_ready(struct adapter *adapter)
int t3_replay_prep_adapter(struct adapter *adapter)
{
const struct adapter_info *ai = adapter->params.info;
unsigned int i, j = 0;
unsigned int i, j = -1;
int ret;
early_hw_init(adapter, ai);
......@@ -3673,17 +3674,17 @@ int t3_replay_prep_adapter(struct adapter *adapter)
return ret;
for_each_port(adapter, i) {
const struct port_type_info *pti;
struct port_info *p = adap2pinfo(adapter, i);
while (!adapter->params.vpd.port_type[j])
++j;
ret = p->port_type->phy_prep(&p->phy, adapter,
ai->phy_base_addr + j,
ai->mdio_ops);
while (!adapter->params.vpd.port_type[++j])
;
pti = &port_types[adapter->params.vpd.port_type[j]];
ret = pti->phy_prep(&p->phy, adapter, p->phy.addr, NULL);
if (ret)
return ret;
p->phy.ops->power_down(&p->phy, 1);
++j;
}
return 0;
......
......@@ -224,6 +224,9 @@ static struct cphy_ops vsc8211_ops = {
int t3_vsc8211_phy_prep(struct cphy *phy, struct adapter *adapter,
int phy_addr, const struct mdio_ops *mdio_ops)
{
cphy_init(phy, adapter, phy_addr, &vsc8211_ops, mdio_ops);
cphy_init(phy, adapter, phy_addr, &vsc8211_ops, mdio_ops,
SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Full |
SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg | SUPPORTED_MII |
SUPPORTED_TP | SUPPORTED_IRQ, "10/100/1000BASE-T");
return 0;
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment