Commit 0507cb02 authored by olivier moysan's avatar olivier moysan Committed by Mark Brown

ASoC: stm32: Add DT bindings for SPDIFRX interface

Add documentation of device tree bindings for the
STM32 SPDIFRX interface.
Signed-off-by: default avatarolivier moysan <olivier.moysan@st.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 5561b66b
STMicroelectronics STM32 S/PDIF receiver (SPDIFRX).
The SPDIFRX peripheral, is designed to receive an S/PDIF flow compliant with
IEC-60958 and IEC-61937.
Required properties:
- compatible: should be "st,stm32h7-spdifrx"
- reg: cpu DAI IP base address and size
- clocks: must contain an entry for kclk (used as S/PDIF signal reference)
- clock-names: must contain "kclk"
- interrupts: cpu DAI interrupt line
- dmas: DMA specifiers for audio data DMA and iec control flow DMA
See STM32 DMA bindings, Documentation/devicetree/bindings/dma/stm32-dma.txt
- dma-names: two dmas have to be defined, "rx" and "rx-ctrl"
Optional properties:
- resets: Reference to a reset controller asserting the SPDIFRX
The device node should contain one 'port' child node with one child 'endpoint'
node, according to the bindings defined in Documentation/devicetree/bindings/
graph.txt.
Example:
spdifrx: spdifrx@40004000 {
compatible = "st,stm32h7-spdifrx";
reg = <0x40004000 0x400>;
clocks = <&rcc SPDIFRX_CK>;
clock-names = "kclk";
interrupts = <97>;
dmas = <&dmamux1 2 93 0x400 0x0>,
<&dmamux1 3 94 0x400 0x0>;
dma-names = "rx", "rx-ctrl";
pinctrl-0 = <&spdifrx_pins>;
pinctrl-names = "default";
spdifrx_port: port {
cpu_endpoint: endpoint {
remote-endpoint = <&codec_endpoint>;
};
};
};
spdif_in: spdif-in {
compatible = "linux,spdif-dir";
codec_port: port {
codec_endpoint: endpoint {
remote-endpoint = <&cpu_endpoint>;
};
};
};
soundcard {
compatible = "audio-graph-card";
dais = <&spdifrx_port>;
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment