Commit 0541f9d0 authored by David Howells's avatar David Howells Committed by Al Viro

rtl8192u: Don't use create_proc_read_entry()

Don't use create_proc_read_entry() as that is deprecated, but rather use
proc_create_data() and seq_file instead.  Whilst we're at it, reduce the
number of show functions where we can share them.

Note: proc_get_stats_ap() should probably use seq_file iteration rather than
list_for_each_entry().

Further note: There appears to be a lot of locking missing in this file to
defend against concurrent access by the driver doing normal operations.
Notably, ieee->network_list traversal and RWCAM/RCAMO command/response access.
Further, do any of the registers read have side effects upon reading?
Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
cc: Jerry Chuang <jerry-chuang@realtek.com>
cc: Mauro Carvalho Chehab <mchehab@redhat.com>
cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cc: linux-wireless@vger.kernel.org
cc: devel@driverdev.osuosl.org
Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
parent d0206fb5
......@@ -71,6 +71,8 @@ double __extendsfdf2(float a) {return a;}
//#include "r8192xU_phyreg.h"
#include <linux/usb.h>
#include <linux/slab.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
// FIXME: check if 2.6.7 is ok
#ifdef CONFIG_RTL8192_PM
......@@ -472,103 +474,73 @@ void watch_dog_timer_callback(unsigned long data);
static struct proc_dir_entry *rtl8192_proc;
static int proc_get_stats_ap(char *page, char **start, off_t offset, int count,
int *eof, void *data)
static int proc_get_stats_ap(struct seq_file *m, void *v)
{
struct net_device *dev = data;
struct net_device *dev = m->private;
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
struct ieee80211_device *ieee = priv->ieee80211;
struct ieee80211_network *target;
int len = 0;
list_for_each_entry(target, &ieee->network_list, list) {
len += snprintf(page + len, count - len, "%s ", target->ssid);
const char *wpa = "non_WPA";
if (target->wpa_ie_len > 0 || target->rsn_ie_len > 0)
len += snprintf(page + len, count - len, "WPA\n");
else
len += snprintf(page + len, count - len, "non_WPA\n");
wpa = "WPA";
seq_printf(m, "%s %s\n", target->ssid, wpa);
}
*eof = 1;
return len;
return 0;
}
static int proc_get_registers(char *page, char **start,
off_t offset, int count,
int *eof, void *data)
static int proc_get_registers(struct seq_file *m, void *v)
{
struct net_device *dev = data;
// struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
int len = 0;
int i,n;
struct net_device *dev = m->private;
int i,n, max = 0xff;
int max=0xff;
/* This dump the current register page */
len += snprintf(page + len, count - len,
"\n####################page 0##################\n ");
seq_puts(m, "\n####################page 0##################\n ");
for (n=0;n<=max;) {
//printk( "\nD: %2x> ", n);
len += snprintf(page + len, count - len,
"\nD: %2x > ",n);
seq_printf(m, "\nD: %2x > ",n);
for (i=0;i<16 && n<=max;i++,n++)
len += snprintf(page + len, count - len,
"%2x ",read_nic_byte(dev,0x000|n));
seq_printf(m, "%2x ",read_nic_byte(dev,0x000|n));
// printk("%2x ",read_nic_byte(dev,n));
}
len += snprintf(page + len, count - len,
"\n####################page 1##################\n ");
seq_puts(m, "\n####################page 1##################\n ");
for (n=0;n<=max;) {
//printk( "\nD: %2x> ", n);
len += snprintf(page + len, count - len,
"\nD: %2x > ",n);
seq_printf(m, "\nD: %2x > ",n);
for (i=0;i<16 && n<=max;i++,n++)
len += snprintf(page + len, count - len,
"%2x ",read_nic_byte(dev,0x100|n));
seq_printf(m, "%2x ",read_nic_byte(dev,0x100|n));
// printk("%2x ",read_nic_byte(dev,n));
}
len += snprintf(page + len, count - len,
"\n####################page 3##################\n ");
seq_puts(m, "\n####################page 3##################\n ");
for (n=0;n<=max;) {
//printk( "\nD: %2x> ", n);
len += snprintf(page + len, count - len,
"\nD: %2x > ",n);
seq_printf(m, "\nD: %2x > ",n);
for(i=0;i<16 && n<=max;i++,n++)
len += snprintf(page + len, count - len,
"%2x ",read_nic_byte(dev,0x300|n));
seq_printf(m, "%2x ",read_nic_byte(dev,0x300|n));
// printk("%2x ",read_nic_byte(dev,n));
}
len += snprintf(page + len, count - len,"\n");
*eof = 1;
return len;
seq_putc(m, '\n');
return 0;
}
static int proc_get_stats_tx(char *page, char **start,
off_t offset, int count,
int *eof, void *data)
static int proc_get_stats_tx(struct seq_file *m, void *v)
{
struct net_device *dev = data;
struct net_device *dev = m->private;
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
int len = 0;
len += snprintf(page + len, count - len,
seq_printf(m,
"TX VI priority ok int: %lu\n"
"TX VI priority error int: %lu\n"
"TX VO priority ok int: %lu\n"
......@@ -629,22 +601,15 @@ static int proc_get_stats_tx(char *page, char **start,
// priv->stats.txbeaconerr
);
*eof = 1;
return len;
return 0;
}
static int proc_get_stats_rx(char *page, char **start,
off_t offset, int count,
int *eof, void *data)
static int proc_get_stats_rx(struct seq_file *m, void *v)
{
struct net_device *dev = data;
struct net_device *dev = m->private;
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
int len = 0;
len += snprintf(page + len, count - len,
seq_printf(m,
"RX packets: %lu\n"
"RX urb status error: %lu\n"
"RX invalid urb error: %lu\n",
......@@ -652,9 +617,9 @@ static int proc_get_stats_rx(char *page, char **start,
priv->stats.rxstaterr,
priv->stats.rxurberr);
*eof = 1;
return len;
return 0;
}
void rtl8192_proc_module_init(void)
{
RT_TRACE(COMP_INIT, "Initializing proc filesystem");
......@@ -667,74 +632,77 @@ void rtl8192_proc_module_remove(void)
remove_proc_entry(RTL819xU_MODULE_NAME, init_net.proc_net);
}
void rtl8192_proc_remove_one(struct net_device *dev)
/*
* seq_file wrappers for procfile show routines.
*/
static int rtl8192_proc_open(struct inode *inode, struct file *file)
{
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
struct net_device *dev = PDE(inode)->parent->data;
int (*show)(struct seq_file *, void *) = PDE_DATA(inode);
if (priv->dir_dev) {
// remove_proc_entry("stats-hw", priv->dir_dev);
remove_proc_entry("stats-tx", priv->dir_dev);
remove_proc_entry("stats-rx", priv->dir_dev);
// remove_proc_entry("stats-ieee", priv->dir_dev);
remove_proc_entry("stats-ap", priv->dir_dev);
remove_proc_entry("registers", priv->dir_dev);
// remove_proc_entry("cck-registers",priv->dir_dev);
// remove_proc_entry("ofdm-registers",priv->dir_dev);
//remove_proc_entry(dev->name, rtl8192_proc);
remove_proc_entry("wlan0", rtl8192_proc);
priv->dir_dev = NULL;
}
return single_open(file, show, dev);
}
static const struct file_operations rtl8192_proc_fops = {
.open = rtl8192_proc_open,
.read = seq_read,
.llseek = seq_lseek,
.release = seq_release,
};
/*
* Table of proc files we need to create.
*/
struct rtl8192_proc_file {
char name[12];
int (*show)(struct seq_file *, void *);
};
static const struct rtl8192_proc_file rtl8192_proc_files[] = {
{ "stats-rx", &proc_get_stats_rx },
{ "stats-tx", &proc_get_stats_tx },
{ "stats-ap", &proc_get_stats_ap },
{ "registers", &proc_get_registers },
{ "" }
};
void rtl8192_proc_init_one(struct net_device *dev)
{
struct proc_dir_entry *e;
const struct rtl8192_proc_file *f;
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
priv->dir_dev = proc_mkdir(dev->name, rtl8192_proc);
if (!priv->dir_dev) {
RT_TRACE(COMP_ERR, "Unable to initialize /proc/net/rtl8192/%s\n",
dev->name);
return;
}
e = create_proc_read_entry("stats-rx", S_IFREG | S_IRUGO,
priv->dir_dev, proc_get_stats_rx, dev);
if (!e) {
RT_TRACE(COMP_ERR,"Unable to initialize "
"/proc/net/rtl8192/%s/stats-rx\n",
dev->name);
}
e = create_proc_read_entry("stats-tx", S_IFREG | S_IRUGO,
priv->dir_dev, proc_get_stats_tx, dev);
if (!e) {
RT_TRACE(COMP_ERR, "Unable to initialize "
"/proc/net/rtl8192/%s/stats-tx\n",
dev->name);
if (rtl8192_proc) {
priv->dir_dev = proc_mkdir(dev->name, rtl8192_proc);
if (!priv->dir_dev) {
RT_TRACE(COMP_ERR, "Unable to initialize /proc/net/rtl8192/%s\n",
dev->name);
return;
}
priv->dir_dev->data = dev;
for (f = rtl8192_proc_files; f->name[0]; f++) {
if (!proc_create_data(f->name, S_IFREG | S_IRUGO,
priv->dir_dev,
rtl8192_proc_fops, f->show)) {
RT_TRACE(COMP_ERR, "Unable to initialize "
"/proc/net/rtl8192/%s/%s\n",
dev->name, f->name);
return;
}
}
}
}
e = create_proc_read_entry("stats-ap", S_IFREG | S_IRUGO,
priv->dir_dev, proc_get_stats_ap, dev);
if (!e) {
RT_TRACE(COMP_ERR, "Unable to initialize "
"/proc/net/rtl8192/%s/stats-ap\n",
dev->name);
}
void rtl8192_proc_remove_one(struct net_device *dev)
{
struct r8192_priv *priv = (struct r8192_priv *)ieee80211_priv(dev);
e = create_proc_read_entry("registers", S_IFREG | S_IRUGO,
priv->dir_dev, proc_get_registers, dev);
if (!e) {
RT_TRACE(COMP_ERR, "Unable to initialize "
"/proc/net/rtl8192/%s/registers\n",
dev->name);
if (priv->dir_dev) {
remove_proc_subtree(dev->name, rtl8192_proc);
priv->dir_dev = NULL;
}
}
/****************************************************************************
-----------------------------MISC STUFF-------------------------
*****************************************************************************/
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment