Merge branch 'pm-cpufreq'

* pm-cpufreq: (28 commits)
  cpufreq: handle calls to ->target_index() in separate routine
  cpufreq: s5pv210: drop check for CONFIG_PM_VERBOSE
  cpufreq: intel_pstate: Remove unused member name of cpudata
  cpufreq: Break out early when frequency equals target_freq
  cpufreq: Tegra: drop wrapper around tegra_update_cpu_speed()
  cpufreq: imx6q: Remove unused include
  cpufreq: imx6q: Drop devm_clk/regulator_get usage
  cpufreq: powernow-k8: Suppress checkpatch warnings
  cpufreq: powernv: make local function static
  cpufreq: Enable big.LITTLE cpufreq driver on arm64
  cpufreq: nforce2: remove DEFINE_PCI_DEVICE_TABLE macro
  intel_pstate: Add CPU IDs for Broadwell processors
  cpufreq: Fix build error on some platforms that use cpufreq_for_each_*
  PM / OPP: Move cpufreq specific OPP functions out of generic OPP library
  PM / OPP: Remove cpufreq wrapper dependency on internal data organization
  cpufreq: Catch double invocations of cpufreq_freq_transition_begin/end
  intel_pstate: Remove sample parameter in intel_pstate_calc_busy
  cpufreq: Kconfig: Fix spelling errors
  cpufreq: Make linux-pm@vger.kernel.org official mailing list
  cpufreq: exynos: Use dev_err/info function instead of pr_err/info
  ...

Documentation/ABI/testing/sysfs-devices-system-cpu

@@ -128,7 +128,7 @@ Description:	Discover cpuidle policy and mechanism
 
 What:		/sys/devices/system/cpu/cpu#/cpufreq/*
 Date:		pre-git history
-Contact:	cpufreq@vger.kernel.org
+Contact:	linux-pm@vger.kernel.org
 Description:	Discover and change clock speed of CPUs
 
 		Clock scaling allows you to change the clock speed of the
@@ -146,7 +146,7 @@ Description:	Discover and change clock speed of CPUs
 
 What:		/sys/devices/system/cpu/cpu#/cpufreq/freqdomain_cpus
 Date:		June 2013
-Contact:	cpufreq@vger.kernel.org
+Contact:	linux-pm@vger.kernel.org
 Description:	Discover CPUs in the same CPU frequency coordination domain
 
 		freqdomain_cpus is the list of CPUs (online+offline) that share

Documentation/cpu-freq/core.txt

@@ -20,6 +20,7 @@ Contents:
 ---------
 1.  CPUFreq core and interfaces
 2.  CPUFreq notifiers
+3.  CPUFreq Table Generation with Operating Performance Point (OPP)
 
 1. General Information
 =======================
@@ -92,3 +93,31 @@ values:
 cpu	- number of the affected CPU
 old	- old frequency
 new	- new frequency
+
+3. CPUFreq Table Generation with Operating Performance Point (OPP)
+==================================================================
+For details about OPP, see Documentation/power/opp.txt
+
+dev_pm_opp_init_cpufreq_table - cpufreq framework typically is initialized with
+	cpufreq_frequency_table_cpuinfo which is provided with the list of
+	frequencies that are available for operation. This function provides
+	a ready to use conversion routine to translate the OPP layer's internal
+	information about the available frequencies into a format readily
+	providable to cpufreq.
+
+	WARNING: Do not use this function in interrupt context.
+
+	Example:
+	 soc_pm_init()
+	 {
+		/* Do things */
+		r = dev_pm_opp_init_cpufreq_table(dev, &freq_table);
+		if (!r)
+			cpufreq_frequency_table_cpuinfo(policy, freq_table);
+		/* Do other things */
+	 }
+
+	NOTE: This function is available only if CONFIG_CPU_FREQ is enabled in
+	addition to CONFIG_PM_OPP.
+
+dev_pm_opp_free_cpufreq_table - Free up the table allocated by dev_pm_opp_init_cpufreq_table

Documentation/cpu-freq/cpu-drivers.txt

@@ -228,3 +228,22 @@ is the corresponding frequency table helper for the ->target
 stage. Just pass the values to this function, and the unsigned int
 index returns the number of the frequency table entry which contains
 the frequency the CPU shall be set to.
+
+The following macros can be used as iterators over cpufreq_frequency_table:
+
+cpufreq_for_each_entry(pos, table) - iterates over all entries of frequency
+table.
+
+cpufreq-for_each_valid_entry(pos, table) - iterates over all entries,
+excluding CPUFREQ_ENTRY_INVALID frequencies.
+Use arguments "pos" - a cpufreq_frequency_table * as a loop cursor and
+"table" - the cpufreq_frequency_table * you want to iterate over.
+
+For example:
+
+	struct cpufreq_frequency_table *pos, *driver_freq_table;
+
+	cpufreq_for_each_entry(pos, driver_freq_table) {
+		/* Do something with pos */
+		pos->frequency = ...
+	}

Documentation/cpu-freq/index.txt

@@ -35,8 +35,8 @@ Mailing List
 ------------
 There is a CPU frequency changing CVS commit and general list where
 you can report bugs, problems or submit patches. To post a message,
-send an email to cpufreq@vger.kernel.org, to subscribe go to
-http://vger.kernel.org/vger-lists.html#cpufreq and follow the
+send an email to linux-pm@vger.kernel.org, to subscribe go to
+http://vger.kernel.org/vger-lists.html#linux-pm and follow the
 instructions there.
 
 Links

Documentation/power/opp.txt

@@ -10,8 +10,7 @@ Contents
 3. OPP Search Functions
 4. OPP Availability Control Functions
 5. OPP Data Retrieval Functions
-6. Cpufreq Table Generation
-7. Data Structures
+6. Data Structures
 
 1. Introduction
 ===============
@@ -72,7 +71,6 @@ operations until that OPP could be re-enabled if possible.
 OPP library facilitates this concept in it's implementation. The following
 operational functions operate only on available opps:
 opp_find_freq_{ceil, floor}, dev_pm_opp_get_voltage, dev_pm_opp_get_freq, dev_pm_opp_get_opp_count
-and dev_pm_opp_init_cpufreq_table
 
 dev_pm_opp_find_freq_exact is meant to be used to find the opp pointer which can then
 be used for dev_pm_opp_enable/disable functions to make an opp available as required.
@@ -96,10 +94,9 @@ using RCU read locks. The opp_find_freq_{exact,ceil,floor},
 opp_get_{voltage, freq, opp_count} fall into this category.
 
 opp_{add,enable,disable} are updaters which use mutex and implement it's own
-RCU locking mechanisms. dev_pm_opp_init_cpufreq_table acts as an updater and uses
-mutex to implment RCU updater strategy. These functions should *NOT* be called
-under RCU locks and other contexts that prevent blocking functions in RCU or
-mutex operations from working.
+RCU locking mechanisms. These functions should *NOT* be called under RCU locks
+and other contexts that prevent blocking functions in RCU or mutex operations
+from working.
 
 2. Initial OPP List Registration
 ================================
@@ -311,34 +308,7 @@ dev_pm_opp_get_opp_count - Retrieve the number of available opps for a device
 		/* Do other things */
 	 }
 
-6. Cpufreq Table Generation
-===========================
-dev_pm_opp_init_cpufreq_table - cpufreq framework typically is initialized with
-	cpufreq_frequency_table_cpuinfo which is provided with the list of
-	frequencies that are available for operation. This function provides
-	a ready to use conversion routine to translate the OPP layer's internal
-	information about the available frequencies into a format readily
-	providable to cpufreq.
-
-	WARNING: Do not use this function in interrupt context.
-
-	Example:
-	 soc_pm_init()
-	 {
-		/* Do things */
-		r = dev_pm_opp_init_cpufreq_table(dev, &freq_table);
-		if (!r)
-			cpufreq_frequency_table_cpuinfo(policy, freq_table);
-		/* Do other things */
-	 }
-
-	NOTE: This function is available only if CONFIG_CPU_FREQ is enabled in
-	addition to CONFIG_PM as power management feature is required to
-	dynamically scale voltage and frequency in a system.
-
-dev_pm_opp_free_cpufreq_table - Free up the table allocated by dev_pm_opp_init_cpufreq_table
-
-7. Data Structures
+6. Data Structures
 ==================
 Typically an SoC contains multiple voltage domains which are variable. Each
 domain is represented by a device pointer. The relationship to OPP can be

MAINTAINERS

@@ -2410,7 +2410,6 @@ F:	drivers/net/ethernet/ti/cpmac.c
 CPU FREQUENCY DRIVERS
 M:	Rafael J. Wysocki <rjw@rjwysocki.net>
 M:	Viresh Kumar <viresh.kumar@linaro.org>
-L:	cpufreq@vger.kernel.org
 L:	linux-pm@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
@@ -2421,7 +2420,6 @@ F:	include/linux/cpufreq.h
 CPU FREQUENCY DRIVERS - ARM BIG LITTLE
 M:	Viresh Kumar <viresh.kumar@linaro.org>
 M:	Sudeep Holla <sudeep.holla@arm.com>
-L:	cpufreq@vger.kernel.org
 L:	linux-pm@vger.kernel.org
 W:	http://www.arm.com/products/processors/technologies/biglittleprocessing.php
 S:	Maintained

arch/arm/mach-davinci/da850.c

@@ -1092,20 +1092,21 @@ int da850_register_cpufreq(char *async_clk)
 
 static int da850_round_armrate(struct clk *clk, unsigned long rate)
 {
-	int i, ret = 0, diff;
+	int ret = 0, diff;
 	unsigned int best = (unsigned int) -1;
 	struct cpufreq_frequency_table *table = cpufreq_info.freq_table;
+	struct cpufreq_frequency_table *pos;
 
 	rate /= 1000; /* convert to kHz */
 
-	for (i = 0; table[i].frequency != CPUFREQ_TABLE_END; i++) {
-		diff = table[i].frequency - rate;
+	cpufreq_for_each_entry(pos, table) {
+		diff = pos->frequency - rate;
 		if (diff < 0)
 			diff = -diff;
 
 		if (diff < best) {
 			best = diff;
-			ret = table[i].frequency;
+			ret = pos->frequency;
 		}
 	}
 

arch/mips/loongson/lemote-2f/clock.c

@@ -91,10 +91,9 @@ EXPORT_SYMBOL(clk_put);
 
 int clk_set_rate(struct clk *clk, unsigned long rate)
 {
-	unsigned int rate_khz = rate / 1000;
+	struct cpufreq_frequency_table *pos;
 	int ret = 0;
 	int regval;
-	int i;
 
 	if (likely(clk->ops && clk->ops->set_rate)) {
 		unsigned long flags;
@@ -107,22 +106,16 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
 	if (unlikely(clk->flags & CLK_RATE_PROPAGATES))
 		propagate_rate(clk);
 
-	for (i = 0; loongson2_clockmod_table[i].frequency != CPUFREQ_TABLE_END;
-	     i++) {
-		if (loongson2_clockmod_table[i].frequency ==
-		    CPUFREQ_ENTRY_INVALID)
-			continue;
-		if (rate_khz == loongson2_clockmod_table[i].frequency)
+	cpufreq_for_each_valid_entry(pos, loongson2_clockmod_table)
+		if (rate == pos->frequency)
 			break;
-	}
-	if (rate_khz != loongson2_clockmod_table[i].frequency)
+	if (rate != pos->frequency)
 		return -ENOTSUPP;
 
 	clk->rate = rate;
 
 	regval = LOONGSON_CHIPCFG0;
-	regval = (regval & ~0x7) |
-		(loongson2_clockmod_table[i].driver_data - 1);
+	regval = (regval & ~0x7) | (pos->driver_data - 1);
 	LOONGSON_CHIPCFG0 = regval;
 
 	return ret;

drivers/base/power/opp.c

@@ -15,7 +15,6 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/slab.h>
-#include <linux/cpufreq.h>
 #include <linux/device.h>
 #include <linux/list.h>
 #include <linux/rculist.h>
@@ -619,96 +618,6 @@ int dev_pm_opp_disable(struct device *dev, unsigned long freq)
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_disable);
 
-#ifdef CONFIG_CPU_FREQ
-/**
- * dev_pm_opp_init_cpufreq_table() - create a cpufreq table for a device
- * @dev:	device for which we do this operation
- * @table:	Cpufreq table returned back to caller
- *
- * Generate a cpufreq table for a provided device- this assumes that the
- * opp list is already initialized and ready for usage.
- *
- * This function allocates required memory for the cpufreq table. It is
- * expected that the caller does the required maintenance such as freeing
- * the table as required.
- *
- * Returns -EINVAL for bad pointers, -ENODEV if the device is not found, -ENOMEM
- * if no memory available for the operation (table is not populated), returns 0
- * if successful and table is populated.
- *
- * WARNING: It is  important for the callers to ensure refreshing their copy of
- * the table if any of the mentioned functions have been invoked in the interim.
- *
- * Locking: The internal device_opp and opp structures are RCU protected.
- * To simplify the logic, we pretend we are updater and hold relevant mutex here
- * Callers should ensure that this function is *NOT* called under RCU protection
- * or in contexts where mutex locking cannot be used.
- */
-int dev_pm_opp_init_cpufreq_table(struct device *dev,
-			    struct cpufreq_frequency_table **table)
-{
-	struct device_opp *dev_opp;
-	struct dev_pm_opp *opp;
-	struct cpufreq_frequency_table *freq_table;
-	int i = 0;
-
-	/* Pretend as if I am an updater */
-	mutex_lock(&dev_opp_list_lock);
-
-	dev_opp = find_device_opp(dev);
-	if (IS_ERR(dev_opp)) {
-		int r = PTR_ERR(dev_opp);
-		mutex_unlock(&dev_opp_list_lock);
-		dev_err(dev, "%s: Device OPP not found (%d)\n", __func__, r);
-		return r;
-	}
-
-	freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) *
-			     (dev_pm_opp_get_opp_count(dev) + 1), GFP_KERNEL);
-	if (!freq_table) {
-		mutex_unlock(&dev_opp_list_lock);
-		dev_warn(dev, "%s: Unable to allocate frequency table\n",
-			__func__);
-		return -ENOMEM;
-	}
-
-	list_for_each_entry(opp, &dev_opp->opp_list, node) {
-		if (opp->available) {
-			freq_table[i].driver_data = i;
-			freq_table[i].frequency = opp->rate / 1000;
-			i++;
-		}
-	}
-	mutex_unlock(&dev_opp_list_lock);
-
-	freq_table[i].driver_data = i;
-	freq_table[i].frequency = CPUFREQ_TABLE_END;
-
-	*table = &freq_table[0];
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(dev_pm_opp_init_cpufreq_table);
-
-/**
- * dev_pm_opp_free_cpufreq_table() - free the cpufreq table
- * @dev:	device for which we do this operation
- * @table:	table to free
- *
- * Free up the table allocated by dev_pm_opp_init_cpufreq_table
- */
-void dev_pm_opp_free_cpufreq_table(struct device *dev,
-				struct cpufreq_frequency_table **table)
-{
-	if (!table)
-		return;
-
-	kfree(*table);
-	*table = NULL;
-}
-EXPORT_SYMBOL_GPL(dev_pm_opp_free_cpufreq_table);
-#endif		/* CONFIG_CPU_FREQ */
-
 /**
  * dev_pm_opp_get_notifier() - find notifier_head of the device with opp
  * @dev:	device pointer used to lookup device OPPs.

drivers/cpufreq/Kconfig.arm

@@ -5,7 +5,8 @@
 # big LITTLE core layer and glue drivers
 config ARM_BIG_LITTLE_CPUFREQ
 	tristate "Generic ARM big LITTLE CPUfreq driver"
-	depends on ARM && BIG_LITTLE && ARM_CPU_TOPOLOGY && HAVE_CLK
+	depends on (BIG_LITTLE && ARM_CPU_TOPOLOGY) || (ARM64 && SMP)
+	depends on HAVE_CLK
 	select PM_OPP
 	help
 	  This enables the Generic CPUfreq driver for ARM big.LITTLE platforms.
@@ -85,7 +86,7 @@ config ARM_EXYNOS_CPU_FREQ_BOOST_SW
 	  It allows usage of special frequencies for Samsung Exynos
 	  processors if thermal conditions are appropriate.
 
-	  It reguires, for safe operation, thermal framework with properly
+	  It requires, for safe operation, thermal framework with properly
 	  defined trip points.
 
 	  If in doubt, say N.
@@ -186,7 +187,7 @@ config ARM_S3C2416_CPUFREQ
 	  S3C2450 SoC. The S3C2416 supports changing the rate of the
 	  armdiv clock source and also entering a so called dynamic
 	  voltage scaling mode in which it is possible to reduce the
-	  core voltage of the cpu.
+	  core voltage of the CPU.
 
 	  If in doubt, say N.
 

drivers/cpufreq/Kconfig.x86

@@ -10,7 +10,7 @@ config X86_INTEL_PSTATE
 	  The driver implements an internal governor and will become
           the scaling driver and governor for Sandy bridge processors.
 
-	  When this driver is enabled it will become the perferred
+	  When this driver is enabled it will become the preferred
           scaling driver for Sandy bridge processors.
 
 	  If in doubt, say N.
@@ -52,7 +52,7 @@ config X86_ACPI_CPUFREQ_CPB
 	help
 	  The powernow-k8 driver used to provide a sysfs knob called "cpb"
 	  to disable the Core Performance Boosting feature of AMD CPUs. This
-	  file has now been superseeded by the more generic "boost" entry.
+	  file has now been superseded by the more generic "boost" entry.
 
 	  By enabling this option the acpi_cpufreq driver provides the old
 	  entry in addition to the new boost ones, for compatibility reasons.

drivers/cpufreq/Makefile

 # CPUfreq core
 obj-$(CONFIG_CPU_FREQ)			+= cpufreq.o freq_table.o
+obj-$(CONFIG_PM_OPP)			+= cpufreq_opp.o
+
 # CPUfreq stats
 obj-$(CONFIG_CPU_FREQ_STAT)             += cpufreq_stats.o
 

drivers/cpufreq/acpi-cpufreq.c

@@ -213,7 +213,7 @@ static unsigned extract_io(u32 value, struct acpi_cpufreq_data *data)
 
 static unsigned extract_msr(u32 msr, struct acpi_cpufreq_data *data)
 {
-	int i;
+	struct cpufreq_frequency_table *pos;
 	struct acpi_processor_performance *perf;
 
 	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD)
@@ -223,10 +223,9 @@ static unsigned extract_msr(u32 msr, struct acpi_cpufreq_data *data)
 
 	perf = data->acpi_data;
 
-	for (i = 0; data->freq_table[i].frequency != CPUFREQ_TABLE_END; i++) {
-		if (msr == perf->states[data->freq_table[i].driver_data].status)
-			return data->freq_table[i].frequency;
-	}
+	cpufreq_for_each_entry(pos, data->freq_table)
+		if (msr == perf->states[pos->driver_data].status)
+			return pos->frequency;
 	return data->freq_table[0].frequency;
 }
 

drivers/cpufreq/arm_big_little.c

@@ -226,22 +226,22 @@ static inline u32 get_table_count(struct cpufreq_frequency_table *table)
 /* get the minimum frequency in the cpufreq_frequency_table */
 static inline u32 get_table_min(struct cpufreq_frequency_table *table)
 {
-	int i;
+	struct cpufreq_frequency_table *pos;
 	uint32_t min_freq = ~0;
-	for (i = 0; (table[i].frequency != CPUFREQ_TABLE_END); i++)
-		if (table[i].frequency < min_freq)
-			min_freq = table[i].frequency;
+	cpufreq_for_each_entry(pos, table)
+		if (pos->frequency < min_freq)
+			min_freq = pos->frequency;
 	return min_freq;
 }
 
 /* get the maximum frequency in the cpufreq_frequency_table */
 static inline u32 get_table_max(struct cpufreq_frequency_table *table)
 {
-	int i;
+	struct cpufreq_frequency_table *pos;
 	uint32_t max_freq = 0;
-	for (i = 0; (table[i].frequency != CPUFREQ_TABLE_END); i++)
-		if (table[i].frequency > max_freq)
-			max_freq = table[i].frequency;
+	cpufreq_for_each_entry(pos, table)
+		if (pos->frequency > max_freq)
+			max_freq = pos->frequency;
 	return max_freq;
 }
 

drivers/cpufreq/cpufreq-nforce2.c

@@ -379,7 +379,7 @@ static struct cpufreq_driver nforce2_driver = {
 };
 
 #ifdef MODULE
-static DEFINE_PCI_DEVICE_TABLE(nforce2_ids) = {
+static const struct pci_device_id nforce2_ids[] = {
 	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2 },
 	{}
 };

drivers/cpufreq/cpufreq.c

@@ -354,6 +354,18 @@ static void cpufreq_notify_post_transition(struct cpufreq_policy *policy,
 void cpufreq_freq_transition_begin(struct cpufreq_policy *policy,
 		struct cpufreq_freqs *freqs)
 {
+
+	/*
+	 * Catch double invocations of _begin() which lead to self-deadlock.
+	 * ASYNC_NOTIFICATION drivers are left out because the cpufreq core
+	 * doesn't invoke _begin() on their behalf, and hence the chances of
+	 * double invocations are very low. Moreover, there are scenarios
+	 * where these checks can emit false-positive warnings in these
+	 * drivers; so we avoid that by skipping them altogether.
+	 */
+	WARN_ON(!(cpufreq_driver->flags & CPUFREQ_ASYNC_NOTIFICATION)
+				&& current == policy->transition_task);
+
 wait:
 	wait_event(policy->transition_wait, !policy->transition_ongoing);
 
@@ -365,6 +377,7 @@ void cpufreq_freq_transition_begin(struct cpufreq_policy *policy,
 	}
 
 	policy->transition_ongoing = true;
+	policy->transition_task = current;
 
 	spin_unlock(&policy->transition_lock);
 
@@ -381,6 +394,7 @@ void cpufreq_freq_transition_end(struct cpufreq_policy *policy,
 	cpufreq_notify_post_transition(policy, freqs, transition_failed);
 
 	policy->transition_ongoing = false;
+	policy->transition_task = NULL;
 
 	wake_up(&policy->transition_wait);
 }
@@ -1802,12 +1816,43 @@ EXPORT_SYMBOL(cpufreq_unregister_notifier);
  *                              GOVERNORS                            *
  *********************************************************************/
 
+static int __target_index(struct cpufreq_policy *policy,
+			  struct cpufreq_frequency_table *freq_table, int index)
+{
+	struct cpufreq_freqs freqs;
+	int retval = -EINVAL;
+	bool notify;
+
+	notify = !(cpufreq_driver->flags & CPUFREQ_ASYNC_NOTIFICATION);
+
+	if (notify) {
+		freqs.old = policy->cur;
+		freqs.new = freq_table[index].frequency;
+		freqs.flags = 0;
+
+		pr_debug("%s: cpu: %d, oldfreq: %u, new freq: %u\n",
+			 __func__, policy->cpu, freqs.old, freqs.new);
+
+		cpufreq_freq_transition_begin(policy, &freqs);
+	}
+
+	retval = cpufreq_driver->target_index(policy, index);
+	if (retval)
+		pr_err("%s: Failed to change cpu frequency: %d\n", __func__,
+		       retval);
+
+	if (notify)
+		cpufreq_freq_transition_end(policy, &freqs, retval);
+
+	return retval;
+}
+
 int __cpufreq_driver_target(struct cpufreq_policy *policy,
 			    unsigned int target_freq,
 			    unsigned int relation)
 {
-	int retval = -EINVAL;
 	unsigned int old_target_freq = target_freq;
+	int retval = -EINVAL;
 
 	if (cpufreq_disabled())
 		return -ENODEV;
@@ -1834,8 +1879,6 @@ int __cpufreq_driver_target(struct cpufreq_policy *policy,
 		retval = cpufreq_driver->target(policy, target_freq, relation);
 	else if (cpufreq_driver->target_index) {
 		struct cpufreq_frequency_table *freq_table;
-		struct cpufreq_freqs freqs;
-		bool notify;
 		int index;
 
 		freq_table = cpufreq_frequency_get_table(policy->cpu);
@@ -1856,26 +1899,7 @@ int __cpufreq_driver_target(struct cpufreq_policy *policy,
 			goto out;
 		}
 
-		notify = !(cpufreq_driver->flags & CPUFREQ_ASYNC_NOTIFICATION);
-
-		if (notify) {
-			freqs.old = policy->cur;
-			freqs.new = freq_table[index].frequency;
-			freqs.flags = 0;
-
-			pr_debug("%s: cpu: %d, oldfreq: %u, new freq: %u\n",
-				 __func__, policy->cpu, freqs.old, freqs.new);
-
-			cpufreq_freq_transition_begin(policy, &freqs);
-		}
-
-		retval = cpufreq_driver->target_index(policy, index);
-		if (retval)
-			pr_err("%s: Failed to change cpu frequency: %d\n",
-			       __func__, retval);
-
-		if (notify)
-			cpufreq_freq_transition_end(policy, &freqs, retval);
+		retval = __target_index(policy, freq_table, index);
 	}
 
 out:

drivers/cpufreq/cpufreq_opp.c

+/*
+ * Generic OPP helper interface for CPUFreq drivers
+ *
+ * Copyright (C) 2009-2014 Texas Instruments Incorporated.
+ *	Nishanth Menon
+ *	Romit Dasgupta
+ *	Kevin Hilman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/cpufreq.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/pm_opp.h>
+#include <linux/rcupdate.h>
+#include <linux/slab.h>
+
+/**
+ * dev_pm_opp_init_cpufreq_table() - create a cpufreq table for a device
+ * @dev:	device for which we do this operation
+ * @table:	Cpufreq table returned back to caller
+ *
+ * Generate a cpufreq table for a provided device- this assumes that the
+ * opp list is already initialized and ready for usage.
+ *
+ * This function allocates required memory for the cpufreq table. It is
+ * expected that the caller does the required maintenance such as freeing
+ * the table as required.
+ *
+ * Returns -EINVAL for bad pointers, -ENODEV if the device is not found, -ENOMEM
+ * if no memory available for the operation (table is not populated), returns 0
+ * if successful and table is populated.
+ *
+ * WARNING: It is  important for the callers to ensure refreshing their copy of
+ * the table if any of the mentioned functions have been invoked in the interim.
+ *
+ * Locking: The internal device_opp and opp structures are RCU protected.
+ * Since we just use the regular accessor functions to access the internal data
+ * structures, we use RCU read lock inside this function. As a result, users of
+ * this function DONOT need to use explicit locks for invoking.
+ */
+int dev_pm_opp_init_cpufreq_table(struct device *dev,
+				  struct cpufreq_frequency_table **table)
+{
+	struct dev_pm_opp *opp;
+	struct cpufreq_frequency_table *freq_table = NULL;
+	int i, max_opps, ret = 0;
+	unsigned long rate;
+
+	rcu_read_lock();
+
+	max_opps = dev_pm_opp_get_opp_count(dev);
+	if (max_opps <= 0) {
+		ret = max_opps ? max_opps : -ENODATA;
+		goto out;
+	}
+
+	freq_table = kzalloc(sizeof(*freq_table) * (max_opps + 1), GFP_KERNEL);
+	if (!freq_table) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	for (i = 0, rate = 0; i < max_opps; i++, rate++) {
+		/* find next rate */
+		opp = dev_pm_opp_find_freq_ceil(dev, &rate);
+		if (IS_ERR(opp)) {
+			ret = PTR_ERR(opp);
+			goto out;
+		}
+		freq_table[i].driver_data = i;
+		freq_table[i].frequency = rate / 1000;
+	}
+
+	freq_table[i].driver_data = i;
+	freq_table[i].frequency = CPUFREQ_TABLE_END;
+
+	*table = &freq_table[0];
+
+out:
+	rcu_read_unlock();
+	if (ret)
+		kfree(freq_table);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_init_cpufreq_table);
+
+/**
+ * dev_pm_opp_free_cpufreq_table() - free the cpufreq table
+ * @dev:	device for which we do this operation
+ * @table:	table to free
+ *
+ * Free up the table allocated by dev_pm_opp_init_cpufreq_table
+ */
+void dev_pm_opp_free_cpufreq_table(struct device *dev,
+				   struct cpufreq_frequency_table **table)
+{
+	if (!table)
+		return;
+
+	kfree(*table);
+	*table = NULL;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_free_cpufreq_table);

drivers/cpufreq/cpufreq_stats.c

@@ -182,11 +182,11 @@ static void cpufreq_stats_free_table(unsigned int cpu)
 
 static int __cpufreq_stats_create_table(struct cpufreq_policy *policy)
 {
-	unsigned int i, j, count = 0, ret = 0;
+	unsigned int i, count = 0, ret = 0;
 	struct cpufreq_stats *stat;
 	unsigned int alloc_size;
 	unsigned int cpu = policy->cpu;
-	struct cpufreq_frequency_table *table;
+	struct cpufreq_frequency_table *pos, *table;
 
 	table = cpufreq_frequency_get_table(cpu);
 	if (unlikely(!table))
@@ -205,12 +205,8 @@ static int __cpufreq_stats_create_table(struct cpufreq_policy *policy)
 	stat->cpu = cpu;
 	per_cpu(cpufreq_stats_table, cpu) = stat;
 
-	for (i = 0; table[i].frequency != CPUFREQ_TABLE_END; i++) {
-		unsigned int freq = table[i].frequency;
-		if (freq == CPUFREQ_ENTRY_INVALID)
-			continue;
+	cpufreq_for_each_valid_entry(pos, table)
 		count++;
-	}
 
 	alloc_size = count * sizeof(int) + count * sizeof(u64);
 
@@ -228,15 +224,11 @@ static int __cpufreq_stats_create_table(struct cpufreq_policy *policy)
 #ifdef CONFIG_CPU_FREQ_STAT_DETAILS
 	stat->trans_table = stat->freq_table + count;
 #endif
-	j = 0;
-	for (i = 0; table[i].frequency != CPUFREQ_TABLE_END; i++) {
-		unsigned int freq = table[i].frequency;
-		if (freq == CPUFREQ_ENTRY_INVALID)
-			continue;
-		if (freq_table_get_index(stat, freq) == -1)
-			stat->freq_table[j++] = freq;
-	}
-	stat->state_num = j;
+	i = 0;
+	cpufreq_for_each_valid_entry(pos, table)
+		if (freq_table_get_index(stat, pos->frequency) == -1)
+			stat->freq_table[i++] = pos->frequency;
+	stat->state_num = i;
 	spin_lock(&cpufreq_stats_lock);
 	stat->last_time = get_jiffies_64();
 	stat->last_index = freq_table_get_index(stat, policy->cur);

drivers/cpufreq/dbx500-cpufreq.c

@@ -45,7 +45,7 @@ static struct cpufreq_driver dbx500_cpufreq_driver = {
 
 static int dbx500_cpufreq_probe(struct platform_device *pdev)
 {
-	int i = 0;
+	struct cpufreq_frequency_table *pos;
 
 	freq_table = dev_get_platdata(&pdev->dev);
 	if (!freq_table) {
@@ -60,10 +60,8 @@ static int dbx500_cpufreq_probe(struct platform_device *pdev)
 	}
 
 	pr_info("dbx500-cpufreq: Available frequencies:\n");
-	while (freq_table[i].frequency != CPUFREQ_TABLE_END) {
-		pr_info("  %d Mhz\n", freq_table[i].frequency/1000);
-		i++;
-	}
+	cpufreq_for_each_entry(pos, freq_table)
+		pr_info("  %d Mhz\n", pos->frequency / 1000);
 
 	return cpufreq_register_driver(&dbx500_cpufreq_driver);
 }

drivers/cpufreq/elanfreq.c

@@ -147,7 +147,7 @@ static int elanfreq_target(struct cpufreq_policy *policy,
 static int elanfreq_cpu_init(struct cpufreq_policy *policy)
 {
 	struct cpuinfo_x86 *c = &cpu_data(0);
-	unsigned int i;
+	struct cpufreq_frequency_table *pos;
 
 	/* capability check */
 	if ((c->x86_vendor != X86_VENDOR_AMD) ||
@@ -159,10 +159,9 @@ static int elanfreq_cpu_init(struct cpufreq_policy *policy)
 		max_freq = elanfreq_get_cpu_frequency(0);
 
 	/* table init */
-	for (i = 0; (elanfreq_table[i].frequency != CPUFREQ_TABLE_END); i++) {
-		if (elanfreq_table[i].frequency > max_freq)
-			elanfreq_table[i].frequency = CPUFREQ_ENTRY_INVALID;
-	}
+	cpufreq_for_each_entry(pos, elanfreq_table)
+		if (pos->frequency > max_freq)
+			pos->frequency = CPUFREQ_ENTRY_INVALID;
 
 	/* cpuinfo and default policy values */
 	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;

drivers/cpufreq/exynos-cpufreq.c

@@ -29,17 +29,16 @@ static unsigned int locking_frequency;
 static int exynos_cpufreq_get_index(unsigned int freq)
 {
 	struct cpufreq_frequency_table *freq_table = exynos_info->freq_table;
-	int index;
+	struct cpufreq_frequency_table *pos;
 
-	for (index = 0;
-		freq_table[index].frequency != CPUFREQ_TABLE_END; index++)
-		if (freq_table[index].frequency == freq)
+	cpufreq_for_each_entry(pos, freq_table)
+		if (pos->frequency == freq)
 			break;
 
-	if (freq_table[index].frequency == CPUFREQ_TABLE_END)
+	if (pos->frequency == CPUFREQ_TABLE_END)
 		return -EINVAL;
 
-	return index;
+	return pos - freq_table;
 }
 
 static int exynos_cpufreq_scale(unsigned int target_freq)
@@ -49,6 +48,7 @@ static int exynos_cpufreq_scale(unsigned int target_freq)
 	struct cpufreq_policy *policy = cpufreq_cpu_get(0);
 	unsigned int arm_volt, safe_arm_volt = 0;
 	unsigned int mpll_freq_khz = exynos_info->mpll_freq_khz;
+	struct device *dev = exynos_info->dev;
 	unsigned int old_freq;
 	int index, old_index;
 	int ret = 0;
@@ -90,8 +90,8 @@ static int exynos_cpufreq_scale(unsigned int target_freq)
 		/* Firstly, voltage up to increase frequency */
 		ret = regulator_set_voltage(arm_regulator, arm_volt, arm_volt);
 		if (ret) {
-			pr_err("%s: failed to set cpu voltage to %d\n",
-				__func__, arm_volt);
+			dev_err(dev, "failed to set cpu voltage to %d\n",
+				arm_volt);
 			return ret;
 		}
 	}
@@ -100,8 +100,8 @@ static int exynos_cpufreq_scale(unsigned int target_freq)
 		ret = regulator_set_voltage(arm_regulator, safe_arm_volt,
 				      safe_arm_volt);
 		if (ret) {
-			pr_err("%s: failed to set cpu voltage to %d\n",
-				__func__, safe_arm_volt);
+			dev_err(dev, "failed to set cpu voltage to %d\n",
+				safe_arm_volt);
 			return ret;
 		}
 	}
@@ -115,8 +115,8 @@ static int exynos_cpufreq_scale(unsigned int target_freq)
 		ret = regulator_set_voltage(arm_regulator, arm_volt,
 				arm_volt);
 		if (ret) {
-			pr_err("%s: failed to set cpu voltage to %d\n",
-				__func__, arm_volt);
+			dev_err(dev, "failed to set cpu voltage to %d\n",
+				arm_volt);
 			goto out;
 		}
 	}
@@ -163,6 +163,8 @@ static int exynos_cpufreq_probe(struct platform_device *pdev)
 	if (!exynos_info)
 		return -ENOMEM;
 
+	exynos_info->dev = &pdev->dev;
+
 	if (soc_is_exynos4210())
 		ret = exynos4210_cpufreq_init(exynos_info);
 	else if (soc_is_exynos4212() || soc_is_exynos4412())
@@ -176,13 +178,13 @@ static int exynos_cpufreq_probe(struct platform_device *pdev)
 		goto err_vdd_arm;
 
 	if (exynos_info->set_freq == NULL) {
-		pr_err("%s: No set_freq function (ERR)\n", __func__);
+		dev_err(&pdev->dev, "No set_freq function (ERR)\n");
 		goto err_vdd_arm;
 	}
 
 	arm_regulator = regulator_get(NULL, "vdd_arm");
 	if (IS_ERR(arm_regulator)) {
-		pr_err("%s: failed to get resource vdd_arm\n", __func__);
+		dev_err(&pdev->dev, "failed to get resource vdd_arm\n");
 		goto err_vdd_arm;
 	}
 
@@ -192,7 +194,7 @@ static int exynos_cpufreq_probe(struct platform_device *pdev)
 	if (!cpufreq_register_driver(&exynos_driver))
 		return 0;
 
-	pr_err("%s: failed to register cpufreq driver\n", __func__);
+	dev_err(&pdev->dev, "failed to register cpufreq driver\n");
 	regulator_put(arm_regulator);
 err_vdd_arm:
 	kfree(exynos_info);

drivers/cpufreq/exynos-cpufreq.h

@@ -34,6 +34,7 @@ struct apll_freq {
 };
 
 struct exynos_dvfs_info {
+	struct device	*dev;
 	unsigned long	mpll_freq_khz;
 	unsigned int	pll_safe_idx;
 	struct clk	*cpu_clk;

drivers/cpufreq/exynos5440-cpufreq.c

@@ -114,25 +114,23 @@ static struct cpufreq_freqs freqs;
 
 static int init_div_table(void)
 {
-	struct cpufreq_frequency_table *freq_tbl = dvfs_info->freq_table;
+	struct cpufreq_frequency_table *pos, *freq_tbl = dvfs_info->freq_table;
 	unsigned int tmp, clk_div, ema_div, freq, volt_id;
-	int i = 0;
 	struct dev_pm_opp *opp;
 
 	rcu_read_lock();
-	for (i = 0; freq_tbl[i].frequency != CPUFREQ_TABLE_END; i++) {
-
+	cpufreq_for_each_entry(pos, freq_tbl) {
 		opp = dev_pm_opp_find_freq_exact(dvfs_info->dev,
-					freq_tbl[i].frequency * 1000, true);
+					pos->frequency * 1000, true);
 		if (IS_ERR(opp)) {
 			rcu_read_unlock();
 			dev_err(dvfs_info->dev,
 				"failed to find valid OPP for %u KHZ\n",
-				freq_tbl[i].frequency);
+				pos->frequency);
 			return PTR_ERR(opp);
 		}
 
-		freq = freq_tbl[i].frequency / 1000; /* In MHZ */
+		freq = pos->frequency / 1000; /* In MHZ */
 		clk_div = ((freq / CPU_DIV_FREQ_MAX) & P0_7_CPUCLKDEV_MASK)
 					<< P0_7_CPUCLKDEV_SHIFT;
 		clk_div |= ((freq / CPU_ATB_FREQ_MAX) & P0_7_ATBCLKDEV_MASK)
@@ -157,7 +155,8 @@ static int init_div_table(void)
 		tmp = (clk_div | ema_div | (volt_id << P0_7_VDD_SHIFT)
 			| ((freq / FREQ_UNIT) << P0_7_FREQ_SHIFT));
 
-		__raw_writel(tmp, dvfs_info->base + XMU_PMU_P0_7 + 4 * i);
+		__raw_writel(tmp, dvfs_info->base + XMU_PMU_P0_7 + 4 *
+						(pos - freq_tbl));
 	}
 
 	rcu_read_unlock();
@@ -166,8 +165,9 @@ static int init_div_table(void)
 
 static void exynos_enable_dvfs(unsigned int cur_frequency)
 {
-	unsigned int tmp, i, cpu;
+	unsigned int tmp, cpu;
 	struct cpufreq_frequency_table *freq_table = dvfs_info->freq_table;
+	struct cpufreq_frequency_table *pos;
 	/* Disable DVFS */
 	__raw_writel(0,	dvfs_info->base + XMU_DVFS_CTRL);
 
@@ -182,15 +182,15 @@ static void exynos_enable_dvfs(unsigned int cur_frequency)
 	 __raw_writel(tmp, dvfs_info->base + XMU_PMUIRQEN);
 
 	/* Set initial performance index */
-	for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++)
-		if (freq_table[i].frequency == cur_frequency)
+	cpufreq_for_each_entry(pos, freq_table)
+		if (pos->frequency == cur_frequency)
 			break;
 
-	if (freq_table[i].frequency == CPUFREQ_TABLE_END) {
+	if (pos->frequency == CPUFREQ_TABLE_END) {
 		dev_crit(dvfs_info->dev, "Boot up frequency not supported\n");
 		/* Assign the highest frequency */
-		i = 0;
-		cur_frequency = freq_table[i].frequency;
+		pos = freq_table;
+		cur_frequency = pos->frequency;
 	}
 
 	dev_info(dvfs_info->dev, "Setting dvfs initial frequency = %uKHZ",
@@ -199,7 +199,7 @@ static void exynos_enable_dvfs(unsigned int cur_frequency)
 	for (cpu = 0; cpu < CONFIG_NR_CPUS; cpu++) {
 		tmp = __raw_readl(dvfs_info->base + XMU_C0_3_PSTATE + cpu * 4);
 		tmp &= ~(P_VALUE_MASK << C0_3_PSTATE_NEW_SHIFT);
-		tmp |= (i << C0_3_PSTATE_NEW_SHIFT);
+		tmp |= ((pos - freq_table) << C0_3_PSTATE_NEW_SHIFT);
 		__raw_writel(tmp, dvfs_info->base + XMU_C0_3_PSTATE + cpu * 4);
 	}
 

drivers/cpufreq/freq_table.c

@@ -21,22 +21,19 @@
 int cpufreq_frequency_table_cpuinfo(struct cpufreq_policy *policy,
 				    struct cpufreq_frequency_table *table)
 {
+	struct cpufreq_frequency_table *pos;
 	unsigned int min_freq = ~0;
 	unsigned int max_freq = 0;
-	unsigned int i;
+	unsigned int freq;
 
-	for (i = 0; (table[i].frequency != CPUFREQ_TABLE_END); i++) {
-		unsigned int freq = table[i].frequency;
-		if (freq == CPUFREQ_ENTRY_INVALID) {
-			pr_debug("table entry %u is invalid, skipping\n", i);
+	cpufreq_for_each_valid_entry(pos, table) {
+		freq = pos->frequency;
 
-			continue;
-		}
 		if (!cpufreq_boost_enabled()
-		    && (table[i].flags & CPUFREQ_BOOST_FREQ))
+		    && (pos->flags & CPUFREQ_BOOST_FREQ))
 			continue;
 
-		pr_debug("table entry %u: %u kHz\n", i, freq);
+		pr_debug("table entry %u: %u kHz\n", (int)(pos - table), freq);
 		if (freq < min_freq)
 			min_freq = freq;
 		if (freq > max_freq)
@@ -57,7 +54,8 @@ EXPORT_SYMBOL_GPL(cpufreq_frequency_table_cpuinfo);
 int cpufreq_frequency_table_verify(struct cpufreq_policy *policy,
 				   struct cpufreq_frequency_table *table)
 {
-	unsigned int next_larger = ~0, freq, i = 0;
+	struct cpufreq_frequency_table *pos;
+	unsigned int freq, next_larger = ~0;
 	bool found = false;
 
 	pr_debug("request for verification of policy (%u - %u kHz) for cpu %u\n",
@@ -65,9 +63,9 @@ int cpufreq_frequency_table_verify(struct cpufreq_policy *policy,
 
 	cpufreq_verify_within_cpu_limits(policy);
 
-	for (; freq = table[i].frequency, freq != CPUFREQ_TABLE_END; i++) {
-		if (freq == CPUFREQ_ENTRY_INVALID)
-			continue;
+	cpufreq_for_each_valid_entry(pos, table) {
+		freq = pos->frequency;
+
 		if ((freq >= policy->min) && (freq <= policy->max)) {
 			found = true;
 			break;
@@ -118,7 +116,8 @@ int cpufreq_frequency_table_target(struct cpufreq_policy *policy,
 		.driver_data = ~0,
 		.frequency = 0,
 	};
-	unsigned int i;
+	struct cpufreq_frequency_table *pos;
+	unsigned int freq, i = 0;
 
 	pr_debug("request for target %u kHz (relation: %u) for cpu %u\n",
 					target_freq, relation, policy->cpu);
@@ -132,15 +131,19 @@ int cpufreq_frequency_table_target(struct cpufreq_policy *policy,
 		break;
 	}
 
-	for (i = 0; (table[i].frequency != CPUFREQ_TABLE_END); i++) {
-		unsigned int freq = table[i].frequency;
-		if (freq == CPUFREQ_ENTRY_INVALID)
-			continue;
+	cpufreq_for_each_valid_entry(pos, table) {
+		freq = pos->frequency;
+
+		i = pos - table;
 		if ((freq < policy->min) || (freq > policy->max))
 			continue;
+		if (freq == target_freq) {
+			optimal.driver_data = i;
+			break;
+		}
 		switch (relation) {
 		case CPUFREQ_RELATION_H:
-			if (freq <= target_freq) {
+			if (freq < target_freq) {
 				if (freq >= optimal.frequency) {
 					optimal.frequency = freq;
 					optimal.driver_data = i;
@@ -153,7 +156,7 @@ int cpufreq_frequency_table_target(struct cpufreq_policy *policy,
 			}
 			break;
 		case CPUFREQ_RELATION_L:
-			if (freq >= target_freq) {
+			if (freq > target_freq) {
 				if (freq <= optimal.frequency) {
 					optimal.frequency = freq;
 					optimal.driver_data = i;
@@ -184,8 +187,7 @@ EXPORT_SYMBOL_GPL(cpufreq_frequency_table_target);
 int cpufreq_frequency_table_get_index(struct cpufreq_policy *policy,
 		unsigned int freq)
 {
-	struct cpufreq_frequency_table *table;
-	int i;
+	struct cpufreq_frequency_table *pos, *table;
 
 	table = cpufreq_frequency_get_table(policy->cpu);
 	if (unlikely(!table)) {
@@ -193,10 +195,9 @@ int cpufreq_frequency_table_get_index(struct cpufreq_policy *policy,
 		return -ENOENT;
 	}
 
-	for (i = 0; table[i].frequency != CPUFREQ_TABLE_END; i++) {
-		if (table[i].frequency == freq)
-			return i;
-	}
+	cpufreq_for_each_valid_entry(pos, table)
+		if (pos->frequency == freq)
+			return pos - table;
 
 	return -EINVAL;
 }
@@ -208,16 +209,13 @@ EXPORT_SYMBOL_GPL(cpufreq_frequency_table_get_index);
 static ssize_t show_available_freqs(struct cpufreq_policy *policy, char *buf,
 				    bool show_boost)
 {
-	unsigned int i = 0;
 	ssize_t count = 0;
-	struct cpufreq_frequency_table *table = policy->freq_table;
+	struct cpufreq_frequency_table *pos, *table = policy->freq_table;
 
 	if (!table)
 		return -ENODEV;
 
-	for (i = 0; (table[i].frequency != CPUFREQ_TABLE_END); i++) {
-		if (table[i].frequency == CPUFREQ_ENTRY_INVALID)
-			continue;
+	cpufreq_for_each_valid_entry(pos, table) {
 		/*
 		 * show_boost = true and driver_data = BOOST freq
 		 * display BOOST freqs
@@ -229,10 +227,10 @@ static ssize_t show_available_freqs(struct cpufreq_policy *policy, char *buf,
 		 * show_boost = false and driver_data != BOOST freq
 		 * display NON BOOST freqs
 		 */
-		if (show_boost ^ (table[i].flags & CPUFREQ_BOOST_FREQ))
+		if (show_boost ^ (pos->flags & CPUFREQ_BOOST_FREQ))
 			continue;
 
-		count += sprintf(&buf[count], "%d ", table[i].frequency);
+		count += sprintf(&buf[count], "%d ", pos->frequency);
 	}
 	count += sprintf(&buf[count], "\n");
 

drivers/cpufreq/imx6q-cpufreq.c

@@ -9,7 +9,6 @@
 #include <linux/clk.h>
 #include <linux/cpu.h>
 #include <linux/cpufreq.h>
-#include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/of.h>
@@ -170,25 +169,25 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev)
 		return -ENOENT;
 	}
 
-	arm_clk = devm_clk_get(cpu_dev, "arm");
-	pll1_sys_clk = devm_clk_get(cpu_dev, "pll1_sys");
-	pll1_sw_clk = devm_clk_get(cpu_dev, "pll1_sw");
-	step_clk = devm_clk_get(cpu_dev, "step");
-	pll2_pfd2_396m_clk = devm_clk_get(cpu_dev, "pll2_pfd2_396m");
+	arm_clk = clk_get(cpu_dev, "arm");
+	pll1_sys_clk = clk_get(cpu_dev, "pll1_sys");
+	pll1_sw_clk = clk_get(cpu_dev, "pll1_sw");
+	step_clk = clk_get(cpu_dev, "step");
+	pll2_pfd2_396m_clk = clk_get(cpu_dev, "pll2_pfd2_396m");
 	if (IS_ERR(arm_clk) || IS_ERR(pll1_sys_clk) || IS_ERR(pll1_sw_clk) ||
 	    IS_ERR(step_clk) || IS_ERR(pll2_pfd2_396m_clk)) {
 		dev_err(cpu_dev, "failed to get clocks\n");
 		ret = -ENOENT;
-		goto put_node;
+		goto put_clk;
 	}
 
-	arm_reg = devm_regulator_get(cpu_dev, "arm");
-	pu_reg = devm_regulator_get(cpu_dev, "pu");
-	soc_reg = devm_regulator_get(cpu_dev, "soc");
+	arm_reg = regulator_get(cpu_dev, "arm");
+	pu_reg = regulator_get(cpu_dev, "pu");
+	soc_reg = regulator_get(cpu_dev, "soc");
 	if (IS_ERR(arm_reg) || IS_ERR(pu_reg) || IS_ERR(soc_reg)) {
 		dev_err(cpu_dev, "failed to get regulators\n");
 		ret = -ENOENT;
-		goto put_node;
+		goto put_reg;
 	}
 
 	/*
@@ -201,21 +200,21 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev)
 		ret = of_init_opp_table(cpu_dev);
 		if (ret < 0) {
 			dev_err(cpu_dev, "failed to init OPP table: %d\n", ret);
-			goto put_node;
+			goto put_reg;
 		}
 
 		num = dev_pm_opp_get_opp_count(cpu_dev);
 		if (num < 0) {
 			ret = num;
 			dev_err(cpu_dev, "no OPP table is found: %d\n", ret);
-			goto put_node;
+			goto put_reg;
 		}
 	}
 
 	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
 	if (ret) {
 		dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
-		goto put_node;
+		goto put_reg;
 	}
 
 	/* Make imx6_soc_volt array's size same as arm opp number */
@@ -301,7 +300,24 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev)
 
 free_freq_table:
 	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
-put_node:
+put_reg:
+	if (!IS_ERR(arm_reg))
+		regulator_put(arm_reg);
+	if (!IS_ERR(pu_reg))
+		regulator_put(pu_reg);
+	if (!IS_ERR(soc_reg))
+		regulator_put(soc_reg);
+put_clk:
+	if (!IS_ERR(arm_clk))
+		clk_put(arm_clk);
+	if (!IS_ERR(pll1_sys_clk))
+		clk_put(pll1_sys_clk);
+	if (!IS_ERR(pll1_sw_clk))
+		clk_put(pll1_sw_clk);
+	if (!IS_ERR(step_clk))
+		clk_put(step_clk);
+	if (!IS_ERR(pll2_pfd2_396m_clk))
+		clk_put(pll2_pfd2_396m_clk);
 	of_node_put(np);
 	return ret;
 }
@@ -310,6 +326,14 @@ static int imx6q_cpufreq_remove(struct platform_device *pdev)
 {
 	cpufreq_unregister_driver(&imx6q_cpufreq_driver);
 	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
+	regulator_put(arm_reg);
+	regulator_put(pu_reg);
+	regulator_put(soc_reg);
+	clk_put(arm_clk);
+	clk_put(pll1_sys_clk);
+	clk_put(pll1_sw_clk);
+	clk_put(step_clk);
+	clk_put(pll2_pfd2_396m_clk);
 
 	return 0;
 }

drivers/cpufreq/intel_pstate.c

@@ -32,8 +32,6 @@
 #include <asm/msr.h>
 #include <asm/cpu_device_id.h>
 
-#define SAMPLE_COUNT		3
-
 #define BYT_RATIOS		0x66a
 #define BYT_VIDS		0x66b
 #define BYT_TURBO_RATIOS	0x66c
@@ -90,8 +88,6 @@ struct _pid {
 struct cpudata {
 	int cpu;
 
-	char name[64];
-
 	struct timer_list timer;
 
 	struct pstate_data pstate;
@@ -549,8 +545,6 @@ static inline void intel_pstate_pstate_decrease(struct cpudata *cpu, int steps)
 
 static void intel_pstate_get_cpu_pstates(struct cpudata *cpu)
 {
-	sprintf(cpu->name, "Intel 2nd generation core");
-
 	cpu->pstate.min_pstate = pstate_funcs.get_min();
 	cpu->pstate.max_pstate = pstate_funcs.get_max();
 	cpu->pstate.turbo_pstate = pstate_funcs.get_turbo();
@@ -560,9 +554,9 @@ static void intel_pstate_get_cpu_pstates(struct cpudata *cpu)
 	intel_pstate_set_pstate(cpu, cpu->pstate.min_pstate);
 }
 
-static inline void intel_pstate_calc_busy(struct cpudata *cpu,
-					struct sample *sample)
+static inline void intel_pstate_calc_busy(struct cpudata *cpu)
 {
+	struct sample *sample = &cpu->sample;
 	int64_t core_pct;
 	int32_t rem;
 
@@ -595,7 +589,7 @@ static inline void intel_pstate_sample(struct cpudata *cpu)
 	cpu->sample.aperf -= cpu->prev_aperf;
 	cpu->sample.mperf -= cpu->prev_mperf;
 
-	intel_pstate_calc_busy(cpu, &cpu->sample);
+	intel_pstate_calc_busy(cpu);
 
 	cpu->prev_aperf = aperf;
 	cpu->prev_mperf = mperf;
@@ -684,10 +678,13 @@ static const struct x86_cpu_id intel_pstate_cpu_ids[] = {
 	ICPU(0x37, byt_params),
 	ICPU(0x3a, core_params),
 	ICPU(0x3c, core_params),
+	ICPU(0x3d, core_params),
 	ICPU(0x3e, core_params),
 	ICPU(0x3f, core_params),
 	ICPU(0x45, core_params),
 	ICPU(0x46, core_params),
+	ICPU(0x4f, core_params),
+	ICPU(0x56, core_params),
 	{}
 };
 MODULE_DEVICE_TABLE(x86cpu, intel_pstate_cpu_ids);

drivers/cpufreq/longhaul.c

@@ -530,6 +530,7 @@ static int longhaul_get_ranges(void)
 
 static void longhaul_setup_voltagescaling(void)
 {
+	struct cpufreq_frequency_table *freq_pos;
 	union msr_longhaul longhaul;
 	struct mV_pos minvid, maxvid, vid;
 	unsigned int j, speed, pos, kHz_step, numvscales;
@@ -608,18 +609,16 @@ static void longhaul_setup_voltagescaling(void)
 	/* Calculate kHz for one voltage step */
 	kHz_step = (highest_speed - min_vid_speed) / numvscales;
 
-	j = 0;
-	while (longhaul_table[j].frequency != CPUFREQ_TABLE_END) {
-		speed = longhaul_table[j].frequency;
+	cpufreq_for_each_entry(freq_pos, longhaul_table) {
+		speed = freq_pos->frequency;
 		if (speed > min_vid_speed)
 			pos = (speed - min_vid_speed) / kHz_step + minvid.pos;
 		else
 			pos = minvid.pos;
-		longhaul_table[j].driver_data |= mV_vrm_table[pos] << 8;
+		freq_pos->driver_data |= mV_vrm_table[pos] << 8;
 		vid = vrm_mV_table[mV_vrm_table[pos]];
 		printk(KERN_INFO PFX "f: %d kHz, index: %d, vid: %d mV\n",
-				speed, j, vid.mV);
-		j++;
+			speed, (int)(freq_pos - longhaul_table), vid.mV);
 	}
 
 	can_scale_voltage = 1;

drivers/cpufreq/pasemi-cpufreq.c

@@ -136,9 +136,10 @@ void restore_astate(int cpu)
 
 static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
 {
+	struct cpufreq_frequency_table *pos;
 	const u32 *max_freqp;
 	u32 max_freq;
-	int i, cur_astate;
+	int cur_astate;
 	struct resource res;
 	struct device_node *cpu, *dn;
 	int err = -ENODEV;
@@ -197,10 +198,9 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	pr_debug("initializing frequency table\n");
 
 	/* initialize frequency table */
-	for (i=0; pas_freqs[i].frequency!=CPUFREQ_TABLE_END; i++) {
-		pas_freqs[i].frequency =
-			get_astate_freq(pas_freqs[i].driver_data) * 100000;
-		pr_debug("%d: %d\n", i, pas_freqs[i].frequency);
+	cpufreq_for_each_entry(pos, pas_freqs) {
+		pos->frequency = get_astate_freq(pos->driver_data) * 100000;
+		pr_debug("%d: %d\n", (int)(pos - pas_freqs), pos->frequency);
 	}
 
 	cur_astate = get_cur_astate(policy->cpu);

drivers/cpufreq/powernow-k6.c

@@ -151,6 +151,7 @@ static int powernow_k6_target(struct cpufreq_policy *policy,
 
 static int powernow_k6_cpu_init(struct cpufreq_policy *policy)
 {
+	struct cpufreq_frequency_table *pos;
 	unsigned int i, f;
 	unsigned khz;
 
@@ -168,12 +169,11 @@ static int powernow_k6_cpu_init(struct cpufreq_policy *policy)
 		}
 	}
 	if (param_max_multiplier) {
-		for (i = 0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) {
-			if (clock_ratio[i].driver_data == param_max_multiplier) {
+		cpufreq_for_each_entry(pos, clock_ratio)
+			if (pos->driver_data == param_max_multiplier) {
 				max_multiplier = param_max_multiplier;
 				goto have_max_multiplier;
 			}
-		}
 		printk(KERN_ERR "powernow-k6: invalid max_multiplier parameter, valid parameters 20, 30, 35, 40, 45, 50, 55, 60\n");
 		return -EINVAL;
 	}
@@ -201,12 +201,12 @@ static int powernow_k6_cpu_init(struct cpufreq_policy *policy)
 	param_busfreq = busfreq * 10;
 
 	/* table init */
-	for (i = 0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) {
-		f = clock_ratio[i].driver_data;
+	cpufreq_for_each_entry(pos, clock_ratio) {
+		f = pos->driver_data;
 		if (f > max_multiplier)
-			clock_ratio[i].frequency = CPUFREQ_ENTRY_INVALID;
+			pos->frequency = CPUFREQ_ENTRY_INVALID;
 		else
-			clock_ratio[i].frequency = busfreq * f;
+			pos->frequency = busfreq * f;
 	}
 
 	/* cpuinfo and default policy values */

drivers/cpufreq/powernow-k8.h

@@ -19,7 +19,7 @@ struct powernow_k8_data {
 	u32 vidmvs;  /* usable value calculated from mvs */
 	u32 vstable; /* voltage stabilization time, units 20 us */
 	u32 plllock; /* pll lock time, units 1 us */
-        u32 exttype; /* extended interface = 1 */
+	u32 exttype; /* extended interface = 1 */
 
 	/* keep track of the current fid / vid or pstate */
 	u32 currvid;

drivers/cpufreq/powernv-cpufreq.c

@@ -235,7 +235,7 @@ static void powernv_read_cpu_freq(void *arg)
  * firmware for CPU 'cpu'. This value is reported through the sysfs
  * file cpuinfo_cur_freq.
  */
-unsigned int powernv_cpufreq_get(unsigned int cpu)
+static unsigned int powernv_cpufreq_get(unsigned int cpu)
 {
 	struct powernv_smp_call_data freq_data;
 

drivers/cpufreq/ppc_cbe_cpufreq.c

@@ -67,9 +67,10 @@ static int set_pmode(unsigned int cpu, unsigned int slow_mode)
 
 static int cbe_cpufreq_cpu_init(struct cpufreq_policy *policy)
 {
+	struct cpufreq_frequency_table *pos;
 	const u32 *max_freqp;
 	u32 max_freq;
-	int i, cur_pmode;
+	int cur_pmode;
 	struct device_node *cpu;
 
 	cpu = of_get_cpu_node(policy->cpu, NULL);
@@ -102,9 +103,9 @@ static int cbe_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	pr_debug("initializing frequency table\n");
 
 	/* initialize frequency table */
-	for (i=0; cbe_freqs[i].frequency!=CPUFREQ_TABLE_END; i++) {
-		cbe_freqs[i].frequency = max_freq / cbe_freqs[i].driver_data;
-		pr_debug("%d: %d\n", i, cbe_freqs[i].frequency);
+	cpufreq_for_each_entry(pos, cbe_freqs) {
+		pos->frequency = max_freq / pos->driver_data;
+		pr_debug("%d: %d\n", (int)(pos - cbe_freqs), pos->frequency);
 	}
 
 	/* if DEBUG is enabled set_pmode() measures the latency

drivers/cpufreq/s3c2416-cpufreq.c

@@ -266,7 +266,7 @@ static int s3c2416_cpufreq_set_target(struct cpufreq_policy *policy,
 static void __init s3c2416_cpufreq_cfg_regulator(struct s3c2416_data *s3c_freq)
 {
 	int count, v, i, found;
-	struct cpufreq_frequency_table *freq;
+	struct cpufreq_frequency_table *pos;
 	struct s3c2416_dvfs *dvfs;
 
 	count = regulator_count_voltages(s3c_freq->vddarm);
@@ -275,12 +275,11 @@ static void __init s3c2416_cpufreq_cfg_regulator(struct s3c2416_data *s3c_freq)
 		return;
 	}
 
-	freq = s3c_freq->freq_table;
-	while (count > 0 && freq->frequency != CPUFREQ_TABLE_END) {
-		if (freq->frequency == CPUFREQ_ENTRY_INVALID)
-			continue;
+	if (!count)
+		goto out;
 
-		dvfs = &s3c2416_dvfs_table[freq->driver_data];
+	cpufreq_for_each_valid_entry(pos, s3c_freq->freq_table) {
+		dvfs = &s3c2416_dvfs_table[pos->driver_data];
 		found = 0;
 
 		/* Check only the min-voltage, more is always ok on S3C2416 */
@@ -292,13 +291,12 @@ static void __init s3c2416_cpufreq_cfg_regulator(struct s3c2416_data *s3c_freq)
 
 		if (!found) {
 			pr_debug("cpufreq: %dkHz unsupported by regulator\n",
-				 freq->frequency);
-			freq->frequency = CPUFREQ_ENTRY_INVALID;
+				 pos->frequency);
+			pos->frequency = CPUFREQ_ENTRY_INVALID;
 		}
-
-		freq++;
 	}
 
+out:
 	/* Guessed */
 	s3c_freq->regulator_latency = 1 * 1000 * 1000;
 }
@@ -338,7 +336,7 @@ static struct notifier_block s3c2416_cpufreq_reboot_notifier = {
 static int __init s3c2416_cpufreq_driver_init(struct cpufreq_policy *policy)
 {
 	struct s3c2416_data *s3c_freq = &s3c2416_cpufreq;
-	struct cpufreq_frequency_table *freq;
+	struct cpufreq_frequency_table *pos;
 	struct clk *msysclk;
 	unsigned long rate;
 	int ret;
@@ -427,31 +425,27 @@ static int __init s3c2416_cpufreq_driver_init(struct cpufreq_policy *policy)
 	s3c_freq->regulator_latency = 0;
 #endif
 
-	freq = s3c_freq->freq_table;
-	while (freq->frequency != CPUFREQ_TABLE_END) {
+	cpufreq_for_each_entry(pos, s3c_freq->freq_table) {
 		/* special handling for dvs mode */
-		if (freq->driver_data == 0) {
+		if (pos->driver_data == 0) {
 			if (!s3c_freq->hclk) {
 				pr_debug("cpufreq: %dkHz unsupported as it would need unavailable dvs mode\n",
-					 freq->frequency);
-				freq->frequency = CPUFREQ_ENTRY_INVALID;
+					 pos->frequency);
+				pos->frequency = CPUFREQ_ENTRY_INVALID;
 			} else {
-				freq++;
 				continue;
 			}
 		}
 
 		/* Check for frequencies we can generate */
 		rate = clk_round_rate(s3c_freq->armdiv,
-				      freq->frequency * 1000);
+				      pos->frequency * 1000);
 		rate /= 1000;
-		if (rate != freq->frequency) {
+		if (rate != pos->frequency) {
 			pr_debug("cpufreq: %dkHz unsupported by clock (clk_round_rate return %lu)\n",
-				 freq->frequency, rate);
-			freq->frequency = CPUFREQ_ENTRY_INVALID;
+				pos->frequency, rate);
+			pos->frequency = CPUFREQ_ENTRY_INVALID;
 		}
-
-		freq++;
 	}
 
 	/* Datasheet says PLL stabalisation time must be at least 300us,

drivers/cpufreq/s3c64xx-cpufreq.c

@@ -118,11 +118,10 @@ static void __init s3c64xx_cpufreq_config_regulator(void)
 		pr_err("Unable to check supported voltages\n");
 	}
 
-	freq = s3c64xx_freq_table;
-	while (count > 0 && freq->frequency != CPUFREQ_TABLE_END) {
-		if (freq->frequency == CPUFREQ_ENTRY_INVALID)
-			continue;
+	if (!count)
+		goto out;
 
+	cpufreq_for_each_valid_entry(freq, s3c64xx_freq_table) {
 		dvfs = &s3c64xx_dvfs_table[freq->driver_data];
 		found = 0;
 
@@ -137,10 +136,9 @@ static void __init s3c64xx_cpufreq_config_regulator(void)
 				 freq->frequency);
 			freq->frequency = CPUFREQ_ENTRY_INVALID;
 		}
-
-		freq++;
 	}
 
+out:
 	/* Guess based on having to do an I2C/SPI write; in future we
 	 * will be able to query the regulator performance here. */
 	regulator_latency = 1 * 1000 * 1000;
@@ -179,8 +177,7 @@ static int s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
 	}
 #endif
 
-	freq = s3c64xx_freq_table;
-	while (freq->frequency != CPUFREQ_TABLE_END) {
+	cpufreq_for_each_entry(freq, s3c64xx_freq_table) {
 		unsigned long r;
 
 		/* Check for frequencies we can generate */
@@ -196,8 +193,6 @@ static int s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
 		 * frequency is the maximum we can support. */
 		if (!vddarm && freq->frequency > clk_get_rate(policy->clk) / 1000)
 			freq->frequency = CPUFREQ_ENTRY_INVALID;
-
-		freq++;
 	}
 
 	/* Datasheet says PLL stabalisation time (if we were to use

drivers/cpufreq/s5pv210-cpufreq.c

@@ -175,10 +175,8 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
 	mutex_lock(&set_freq_lock);
 
 	if (no_cpufreq_access) {
-#ifdef CONFIG_PM_VERBOSE
-		pr_err("%s:%d denied access to %s as it is disabled"
-				"temporarily\n", __FILE__, __LINE__, __func__);
-#endif
+		pr_err("Denied access to %s as it is disabled temporarily\n",
+		       __func__);
 		ret = -EINVAL;
 		goto exit;
 	}

drivers/cpufreq/speedstep-centrino.c

@@ -28,7 +28,7 @@
 #include <asm/cpu_device_id.h>
 
 #define PFX		"speedstep-centrino: "
-#define MAINTAINER	"cpufreq@vger.kernel.org"
+#define MAINTAINER	"linux-pm@vger.kernel.org"
 
 #define INTEL_MSR_RANGE	(0xffff)
 

drivers/cpufreq/tegra-cpufreq.c

@@ -82,9 +82,9 @@ static int tegra_cpu_clk_set_rate(unsigned long rate)
 	return ret;
 }
 
-static int tegra_update_cpu_speed(struct cpufreq_policy *policy,
-		unsigned long rate)
+static int tegra_target(struct cpufreq_policy *policy, unsigned int index)
 {
+	unsigned long rate = freq_table[index].frequency;
 	int ret = 0;
 
 	/*
@@ -106,11 +106,6 @@ static int tegra_update_cpu_speed(struct cpufreq_policy *policy,
 	return ret;
 }
 
-static int tegra_target(struct cpufreq_policy *policy, unsigned int index)
-{
-	return tegra_update_cpu_speed(policy, freq_table[index].frequency);
-}
-
 static int tegra_cpu_init(struct cpufreq_policy *policy)
 {
 	int ret;

drivers/mfd/db8500-prcmu.c

@@ -1734,18 +1734,17 @@ static struct cpufreq_frequency_table db8500_cpufreq_table[] = {
 
 static long round_armss_rate(unsigned long rate)
 {
+	struct cpufreq_frequency_table *pos;
 	long freq = 0;
-	int i = 0;
 
 	/* cpufreq table frequencies is in KHz. */
 	rate = rate / 1000;
 
 	/* Find the corresponding arm opp from the cpufreq table. */
-	while (db8500_cpufreq_table[i].frequency != CPUFREQ_TABLE_END) {
-		freq = db8500_cpufreq_table[i].frequency;
+	cpufreq_for_each_entry(pos, db8500_cpufreq_table) {
+		freq = pos->frequency;
 		if (freq == rate)
 			break;
-		i++;
 	}
 
 	/* Return the last valid value, even if a match was not found. */
@@ -1886,23 +1885,21 @@ static void set_clock_rate(u8 clock, unsigned long rate)
 
 static int set_armss_rate(unsigned long rate)
 {
-	int i = 0;
+	struct cpufreq_frequency_table *pos;
 
 	/* cpufreq table frequencies is in KHz. */
 	rate = rate / 1000;
 
 	/* Find the corresponding arm opp from the cpufreq table. */
-	while (db8500_cpufreq_table[i].frequency != CPUFREQ_TABLE_END) {
-		if (db8500_cpufreq_table[i].frequency == rate)
+	cpufreq_for_each_entry(pos, db8500_cpufreq_table)
+		if (pos->frequency == rate)
 			break;
-		i++;
-	}
 
-	if (db8500_cpufreq_table[i].frequency != rate)
+	if (pos->frequency != rate)
 		return -EINVAL;
 
 	/* Set the new arm opp. */
-	return db8500_prcmu_set_arm_opp(db8500_cpufreq_table[i].driver_data);
+	return db8500_prcmu_set_arm_opp(pos->driver_data);
 }
 
 static int set_plldsi_rate(unsigned long rate)

drivers/net/irda/sh_sir.c

@@ -217,21 +217,17 @@ static int sh_sir_crc_init(struct sh_sir_self *self)
 static u32 sh_sir_find_sclk(struct clk *irda_clk)
 {
 	struct cpufreq_frequency_table *freq_table = irda_clk->freq_table;
+	struct cpufreq_frequency_table *pos;
 	struct clk *pclk = clk_get(NULL, "peripheral_clk");
 	u32 limit, min = 0xffffffff, tmp;
-	int i, index = 0;
+	int index = 0;
 
 	limit = clk_get_rate(pclk);
 	clk_put(pclk);
 
 	/* IrDA can not set over peripheral_clk */
-	for (i = 0;
-	     freq_table[i].frequency != CPUFREQ_TABLE_END;
-	     i++) {
-		u32 freq = freq_table[i].frequency;
-
-		if (freq == CPUFREQ_ENTRY_INVALID)
-			continue;
+	cpufreq_for_each_valid_entry(pos, freq_table) {
+		u32 freq = pos->frequency;
 
 		/* IrDA should not over peripheral_clk */
 		if (freq > limit)
@@ -240,7 +236,7 @@ static u32 sh_sir_find_sclk(struct clk *irda_clk)
 		tmp = freq % SCLK_BASE;
 		if (tmp < min) {
 			min = tmp;
-			index = i;
+			index = pos - freq_table;
 		}
 	}
 

drivers/sh/clk/core.c

@@ -196,17 +196,11 @@ int clk_rate_table_find(struct clk *clk,
 			struct cpufreq_frequency_table *freq_table,
 			unsigned long rate)
 {
-	int i;
-
-	for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++) {
-		unsigned long freq = freq_table[i].frequency;
+	struct cpufreq_frequency_table *pos;
 
-		if (freq == CPUFREQ_ENTRY_INVALID)
-			continue;
-
-		if (freq == rate)
-			return i;
-	}
+	cpufreq_for_each_valid_entry(pos, freq_table)
+		if (pos->frequency == rate)
+			return pos - freq_table;
 
 	return -ENOENT;
 }
@@ -575,11 +569,7 @@ long clk_round_parent(struct clk *clk, unsigned long target,
 		return abs(target - *best_freq);
 	}
 
-	for (freq = parent->freq_table; freq->frequency != CPUFREQ_TABLE_END;
-	     freq++) {
-		if (freq->frequency == CPUFREQ_ENTRY_INVALID)
-			continue;
-
+	cpufreq_for_each_valid_entry(freq, parent->freq_table) {
 		if (unlikely(freq->frequency / target <= div_min - 1)) {
 			unsigned long freq_max;
 

drivers/thermal/cpu_cooling.c

@@ -144,11 +144,11 @@ static int get_property(unsigned int cpu, unsigned long input,
 			unsigned int *output,
 			enum cpufreq_cooling_property property)
 {
-	int i, j;
+	int i;
 	unsigned long max_level = 0, level = 0;
 	unsigned int freq = CPUFREQ_ENTRY_INVALID;
 	int descend = -1;
-	struct cpufreq_frequency_table *table =
+	struct cpufreq_frequency_table *pos, *table =
 					cpufreq_frequency_get_table(cpu);
 
 	if (!output)
@@ -157,20 +157,16 @@ static int get_property(unsigned int cpu, unsigned long input,
 	if (!table)
 		return -EINVAL;
 
-	for (i = 0; table[i].frequency != CPUFREQ_TABLE_END; i++) {
-		/* ignore invalid entries */
-		if (table[i].frequency == CPUFREQ_ENTRY_INVALID)
-			continue;
-
+	cpufreq_for_each_valid_entry(pos, table) {
 		/* ignore duplicate entry */
-		if (freq == table[i].frequency)
+		if (freq == pos->frequency)
 			continue;
 
 		/* get the frequency order */
 		if (freq != CPUFREQ_ENTRY_INVALID && descend == -1)
-			descend = !!(freq > table[i].frequency);
+			descend = freq > pos->frequency;
 
-		freq = table[i].frequency;
+		freq = pos->frequency;
 		max_level++;
 	}
 
@@ -190,29 +186,26 @@ static int get_property(unsigned int cpu, unsigned long input,
 	if (property == GET_FREQ)
 		level = descend ? input : (max_level - input);
 
-	for (i = 0, j = 0; table[i].frequency != CPUFREQ_TABLE_END; i++) {
-		/* ignore invalid entry */
-		if (table[i].frequency == CPUFREQ_ENTRY_INVALID)
-			continue;
-
+	i = 0;
+	cpufreq_for_each_valid_entry(pos, table) {
 		/* ignore duplicate entry */
-		if (freq == table[i].frequency)
+		if (freq == pos->frequency)
 			continue;
 
 		/* now we have a valid frequency entry */
-		freq = table[i].frequency;
+		freq = pos->frequency;
 
 		if (property == GET_LEVEL && (unsigned int)input == freq) {
 			/* get level by frequency */
-			*output = descend ? j : (max_level - j);
+			*output = descend ? i : (max_level - i);
 			return 0;
 		}
-		if (property == GET_FREQ && level == j) {
+		if (property == GET_FREQ && level == i) {
 			/* get frequency by level */
 			*output = freq;
 			return 0;
 		}
-		j++;
+		i++;
 	}
 
 	return -EINVAL;

include/linux/cpufreq.h

@@ -110,6 +110,7 @@ struct cpufreq_policy {
 	bool			transition_ongoing; /* Tracks transition status */
 	spinlock_t		transition_lock;
 	wait_queue_head_t	transition_wait;
+	struct task_struct	*transition_task; /* Task which is doing the transition */
 };
 
 /* Only for ACPI */
@@ -468,6 +469,55 @@ struct cpufreq_frequency_table {
 				    * order */
 };
 
+#if defined(CONFIG_CPU_FREQ) && defined(CONFIG_PM_OPP)
+int dev_pm_opp_init_cpufreq_table(struct device *dev,
+				  struct cpufreq_frequency_table **table);
+void dev_pm_opp_free_cpufreq_table(struct device *dev,
+				   struct cpufreq_frequency_table **table);
+#else
+static inline int dev_pm_opp_init_cpufreq_table(struct device *dev,
+						struct cpufreq_frequency_table
+						**table)
+{
+	return -EINVAL;
+}
+
+static inline void dev_pm_opp_free_cpufreq_table(struct device *dev,
+						 struct cpufreq_frequency_table
+						 **table)
+{
+}
+#endif
+
+static inline bool cpufreq_next_valid(struct cpufreq_frequency_table **pos)
+{
+	while ((*pos)->frequency != CPUFREQ_TABLE_END)
+		if ((*pos)->frequency != CPUFREQ_ENTRY_INVALID)
+			return true;
+		else
+			(*pos)++;
+	return false;
+}
+
+/*
+ * cpufreq_for_each_entry -	iterate over a cpufreq_frequency_table
+ * @pos:	the cpufreq_frequency_table * to use as a loop cursor.
+ * @table:	the cpufreq_frequency_table * to iterate over.
+ */
+
+#define cpufreq_for_each_entry(pos, table)	\
+	for (pos = table; pos->frequency != CPUFREQ_TABLE_END; pos++)
+
+/*
+ * cpufreq_for_each_valid_entry -     iterate over a cpufreq_frequency_table
+ *	excluding CPUFREQ_ENTRY_INVALID frequencies.
+ * @pos:        the cpufreq_frequency_table * to use as a loop cursor.
+ * @table:      the cpufreq_frequency_table * to iterate over.
+ */
+
+#define cpufreq_for_each_valid_entry(pos, table)	\
+	for (pos = table; cpufreq_next_valid(&pos); pos++)
+
 int cpufreq_frequency_table_cpuinfo(struct cpufreq_policy *policy,
 				    struct cpufreq_frequency_table *table);
 

include/linux/pm_opp.h

@@ -15,7 +15,6 @@
 #define __LINUX_OPP_H__
 
 #include <linux/err.h>
-#include <linux/cpufreq.h>
 #include <linux/notifier.h>
 
 struct dev_pm_opp;
@@ -117,23 +116,4 @@ static inline int of_init_opp_table(struct device *dev)
 }
 #endif
 
-#if defined(CONFIG_CPU_FREQ) && defined(CONFIG_PM_OPP)
-int dev_pm_opp_init_cpufreq_table(struct device *dev,
-			    struct cpufreq_frequency_table **table);
-void dev_pm_opp_free_cpufreq_table(struct device *dev,
-				struct cpufreq_frequency_table **table);
-#else
-static inline int dev_pm_opp_init_cpufreq_table(struct device *dev,
-			    struct cpufreq_frequency_table **table)
-{
-	return -EINVAL;
-}
-
-static inline
-void dev_pm_opp_free_cpufreq_table(struct device *dev,
-				struct cpufreq_frequency_table **table)
-{
-}
-#endif		/* CONFIG_CPU_FREQ */
-
 #endif		/* __LINUX_OPP_H__ */

tools/power/cpupower/Makefile

@@ -62,7 +62,7 @@ LIB_MAJ=			0.0.0
 LIB_MIN=			0
 
 PACKAGE =			cpupower
-PACKAGE_BUGREPORT =		cpufreq@vger.kernel.org
+PACKAGE_BUGREPORT =		linux-pm@vger.kernel.org
 LANGUAGES = 			de fr it cs pt
 
 

tools/power/cpupower/debug/kernel/cpufreq-test_tsc.c

@@ -18,7 +18,7 @@
  * 5.) if the third value, "diff_pmtmr", changes between 2. and 4., the
  *     TSC-based delay routine on the Linux kernel does not correctly
  *     handle the cpufreq transition. Please report this to
- *     cpufreq@vger.kernel.org
+ *     linux-pm@vger.kernel.org
  */
 
 #include <linux/kernel.h>