Commit 05a05c50 authored by Alex Deucher's avatar Alex Deucher Committed by Dave Airlie

drm/radeon/kms: add hpd support for r1xx-r4xx asics

This just adds the functionality, it's not hooked up
yet.
Signed-off-by: default avatarAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>
parent b500f680
......@@ -65,6 +65,95 @@ MODULE_FIRMWARE(FIRMWARE_R520);
* r100,rv100,rs100,rv200,rs200,r200,rv250,rs300,rv280
*/
/* hpd for digital panel detect/disconnect */
bool r100_hpd_sense(struct radeon_device *rdev, enum radeon_hpd_id hpd)
{
bool connected = false;
switch (hpd) {
case RADEON_HPD_1:
if (RREG32(RADEON_FP_GEN_CNTL) & RADEON_FP_DETECT_SENSE)
connected = true;
break;
case RADEON_HPD_2:
if (RREG32(RADEON_FP2_GEN_CNTL) & RADEON_FP2_DETECT_SENSE)
connected = true;
break;
default:
break;
}
return connected;
}
void r100_hpd_set_polarity(struct radeon_device *rdev,
enum radeon_hpd_id hpd)
{
u32 tmp;
bool connected = r100_hpd_sense(rdev, hpd);
switch (hpd) {
case RADEON_HPD_1:
tmp = RREG32(RADEON_FP_GEN_CNTL);
if (connected)
tmp &= ~RADEON_FP_DETECT_INT_POL;
else
tmp |= RADEON_FP_DETECT_INT_POL;
WREG32(RADEON_FP_GEN_CNTL, tmp);
break;
case RADEON_HPD_2:
tmp = RREG32(RADEON_FP2_GEN_CNTL);
if (connected)
tmp &= ~RADEON_FP2_DETECT_INT_POL;
else
tmp |= RADEON_FP2_DETECT_INT_POL;
WREG32(RADEON_FP2_GEN_CNTL, tmp);
break;
default:
break;
}
}
void r100_hpd_init(struct radeon_device *rdev)
{
struct drm_device *dev = rdev->ddev;
struct drm_connector *connector;
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
struct radeon_connector *radeon_connector = to_radeon_connector(connector);
switch (radeon_connector->hpd.hpd) {
case RADEON_HPD_1:
rdev->irq.hpd[0] = true;
break;
case RADEON_HPD_2:
rdev->irq.hpd[1] = true;
break;
default:
break;
}
}
r100_irq_set(rdev);
}
void r100_hpd_fini(struct radeon_device *rdev)
{
struct drm_device *dev = rdev->ddev;
struct drm_connector *connector;
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
struct radeon_connector *radeon_connector = to_radeon_connector(connector);
switch (radeon_connector->hpd.hpd) {
case RADEON_HPD_1:
rdev->irq.hpd[0] = false;
break;
case RADEON_HPD_2:
rdev->irq.hpd[1] = false;
break;
default:
break;
}
}
}
/*
* PCI GART
*/
......@@ -163,6 +252,12 @@ int r100_irq_set(struct radeon_device *rdev)
if (rdev->irq.crtc_vblank_int[1]) {
tmp |= RADEON_CRTC2_VBLANK_MASK;
}
if (rdev->irq.hpd[0]) {
tmp |= RADEON_FP_DETECT_MASK;
}
if (rdev->irq.hpd[1]) {
tmp |= RADEON_FP2_DETECT_MASK;
}
WREG32(RADEON_GEN_INT_CNTL, tmp);
return 0;
}
......@@ -181,8 +276,9 @@ void r100_irq_disable(struct radeon_device *rdev)
static inline uint32_t r100_irq_ack(struct radeon_device *rdev)
{
uint32_t irqs = RREG32(RADEON_GEN_INT_STATUS);
uint32_t irq_mask = RADEON_SW_INT_TEST | RADEON_CRTC_VBLANK_STAT |
RADEON_CRTC2_VBLANK_STAT;
uint32_t irq_mask = RADEON_SW_INT_TEST |
RADEON_CRTC_VBLANK_STAT | RADEON_CRTC2_VBLANK_STAT |
RADEON_FP_DETECT_STAT | RADEON_FP2_DETECT_STAT;
if (irqs) {
WREG32(RADEON_GEN_INT_STATUS, irqs);
......@@ -213,6 +309,12 @@ int r100_irq_process(struct radeon_device *rdev)
if (status & RADEON_CRTC2_VBLANK_STAT) {
drm_handle_vblank(rdev->ddev, 1);
}
if (status & RADEON_FP_DETECT_STAT) {
DRM_INFO("HPD1\n");
}
if (status & RADEON_FP2_DETECT_STAT) {
DRM_INFO("HPD2\n");
}
status = r100_irq_ack(rdev);
}
if (rdev->msi_enabled) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment