Commit 060b6d9c authored by Senthilvadivu Guruswamy's avatar Senthilvadivu Guruswamy Committed by Tomi Valkeinen

OMAP2, 3: DSS2: DISPC: create platform_driver, move init, exit to driver

Hwmod adaptation design requires each of the DSS HW IP to be a platform driver.
So a platform_driver for DISPC is created and init exit methods are moved from core.c
to its driver probe,remove. pdev member has to be maintained by its own drivers.

DISPC platform driver is registered from inside omap_dss_probe, in the order desired.
Signed-off-by: default avatarSenthilvadivu Guruswamy <svadivu@ti.com>
Signed-off-by: default avatarSumit Semwal <sumit.semwal@ti.com>
Signed-off-by: default avatarTomi Valkeinen <tomi.valkeinen@ti.com>
parent 3448d500
......@@ -213,9 +213,9 @@ static int omap_dss_probe(struct platform_device *pdev)
goto err_dpi;
}
r = dispc_init();
r = dispc_init_platform_driver();
if (r) {
DSSERR("Failed to initialize dispc\n");
DSSERR("Failed to initialize dispc platform driver\n");
goto err_dispc;
}
......@@ -281,7 +281,7 @@ static int omap_dss_probe(struct platform_device *pdev)
err_sdi:
venc_exit();
err_venc:
dispc_exit();
dispc_uninit_platform_driver();
err_dispc:
dpi_exit();
err_dpi:
......@@ -301,7 +301,7 @@ static int omap_dss_remove(struct platform_device *pdev)
dss_uninitialize_debugfs();
venc_exit();
dispc_exit();
dispc_uninit_platform_driver();
dpi_exit();
rfbi_uninit_platform_driver();
if (cpu_is_omap34xx()) {
......
......@@ -178,6 +178,7 @@ struct dispc_irq_stats {
};
static struct {
struct platform_device *pdev;
void __iomem *base;
u32 fifo_size[3];
......@@ -3269,47 +3270,6 @@ static void _omap_dispc_initial_config(void)
dispc_read_plane_fifo_sizes();
}
int dispc_init(void)
{
u32 rev;
spin_lock_init(&dispc.irq_lock);
#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
spin_lock_init(&dispc.irq_stats_lock);
dispc.irq_stats.last_reset = jiffies;
#endif
INIT_WORK(&dispc.error_work, dispc_error_worker);
dispc.base = ioremap(DISPC_BASE, DISPC_SZ_REGS);
if (!dispc.base) {
DSSERR("can't ioremap DISPC\n");
return -ENOMEM;
}
enable_clocks(1);
_omap_dispc_initial_config();
_omap_dispc_initialize_irq();
dispc_save_context();
rev = dispc_read_reg(DISPC_REVISION);
printk(KERN_INFO "OMAP DISPC rev %d.%d\n",
FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0));
enable_clocks(0);
return 0;
}
void dispc_exit(void)
{
iounmap(dispc.base);
}
int dispc_enable_plane(enum omap_plane plane, bool enable)
{
DSSDBG("dispc_enable_plane %d, %d\n", plane, enable);
......@@ -3359,3 +3319,66 @@ int dispc_setup_plane(enum omap_plane plane,
return r;
}
/* DISPC HW IP initialisation */
static int omap_dispchw_probe(struct platform_device *pdev)
{
u32 rev;
dispc.pdev = pdev;
spin_lock_init(&dispc.irq_lock);
#ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS
spin_lock_init(&dispc.irq_stats_lock);
dispc.irq_stats.last_reset = jiffies;
#endif
INIT_WORK(&dispc.error_work, dispc_error_worker);
dispc.base = ioremap(DISPC_BASE, DISPC_SZ_REGS);
if (!dispc.base) {
DSSERR("can't ioremap DISPC\n");
return -ENOMEM;
}
enable_clocks(1);
_omap_dispc_initial_config();
_omap_dispc_initialize_irq();
dispc_save_context();
rev = dispc_read_reg(DISPC_REVISION);
printk(KERN_INFO "OMAP DISPC rev %d.%d\n",
FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0));
enable_clocks(0);
return 0;
}
static int omap_dispchw_remove(struct platform_device *pdev)
{
iounmap(dispc.base);
return 0;
}
static struct platform_driver omap_dispchw_driver = {
.probe = omap_dispchw_probe,
.remove = omap_dispchw_remove,
.driver = {
.name = "omapdss_dispc",
.owner = THIS_MODULE,
},
};
int dispc_init_platform_driver(void)
{
return platform_driver_register(&omap_dispchw_driver);
}
void dispc_uninit_platform_driver(void)
{
return platform_driver_unregister(&omap_dispchw_driver);
}
......@@ -319,8 +319,8 @@ static inline void dpi_exit(void)
#endif
/* DISPC */
int dispc_init(void);
void dispc_exit(void);
int dispc_init_platform_driver(void);
void dispc_uninit_platform_driver(void);
void dispc_dump_clocks(struct seq_file *s);
void dispc_dump_irqs(struct seq_file *s);
void dispc_dump_regs(struct seq_file *s);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment