Skip to content

L
linux
Commit 062bf67d authored by Oleksij Rempel's avatar Oleksij Rempel Committed by Shawn Guo
Browse files
Options

ARM: dts: add Protonic PRTI6G board 

Protonic PRTI6G is a reference platform for industrial, safety critical
applications
Signed-off-by: default avatarOleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 2e0e77e4
Hide whitespace changes
Inline Side-by-side
Showing with 357 additions and 0 deletions
arch/arm/boot/dts/Makefile
View file @ 062bf67d
......@@ -634,6 +634,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ul-pico-pi.dtb \
imx6ul-phytec-segin-ff-rdk-emmc.dtb \
imx6ul-phytec-segin-ff-rdk-nand.dtb \
imx6ul-prti6g.dtb \
imx6ul-tx6ul-0010.dtb \
imx6ul-tx6ul-0011.dtb \
imx6ul-tx6ul-mainboard.dtb \
......
arch/arm/boot/dts/imx6ul-prti6g.dts 0 → 100644
View file @ 062bf67d
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright (c) 2016 Protonic Holland
* Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
*/
/dts-v1/;
#include "imx6ul.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Protonic PRTI6G Board";
compatible = "prt,prti6g", "fsl,imx6ul";
chosen {
stdout-path = &uart1;
};
clock_ksz8081_in: clock-ksz8081-in {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <25000000>;
};
clock_ksz8081_out: clock-ksz8081-out {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <50000000>;
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_leds>;
led-0 {
label = "debug0";
gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
reg_3v2: regulator-3v2 {
compatible = "regulator-fixed";
regulator-name = "3v2";
regulator-min-microvolt = <3200000>;
regulator-max-microvolt = <3200000>;
};
};
&can1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can1>;
status = "okay";
};
&can2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can2>;
status = "okay";
};
&ecspi1 {
cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
};
};
&ecspi2 {
cs-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
status = "okay";
spi@0 {
compatible = "spidev";
reg = <0>;
spi-max-frequency = <1000000>;
};
};
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_eth1>;
phy-mode = "rmii";
phy-handle = <&rmii_phy>;
clocks = <&clks IMX6UL_CLK_ENET>,
<&clks IMX6UL_CLK_ENET_AHB>,
<&clks IMX6UL_CLK_ENET_PTP>,
<&clock_ksz8081_out>;
clock-names = "ipg", "ahb", "ptp",
"enet_clk_ref";
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
/* Microchip KSZ8081RNA PHY */
rmii_phy: ethernet-phy@0 {
reg = <0>;
interrupts-extended = <&gpio5 1 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
reset-deassert-us = <300>;
clocks = <&clock_ksz8081_in>;
clock-names = "rmii-ref";
};
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clock-frequency = <100000>;
status = "okay";
/* additional i2c devices are added automatically by the boot loader */
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clock-frequency = <100000>;
status = "okay";
adc@49 {
compatible = "ti,ads1015";
reg = <0x49>;
#address-cells = <1>;
#size-cells = <0>;
channel@4 {
reg = <4>;
ti,gain = <3>;
ti,datarate = <3>;
};
channel@5 {
reg = <5>;
ti,gain = <3>;
ti,datarate = <3>;
};
channel@6 {
reg = <6>;
ti,gain = <3>;
ti,datarate = <3>;
};
channel@7 {
reg = <7>;
ti,gain = <3>;
ti,datarate = <3>;
};
};
rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
temperature-sensor@70 {
compatible = "ti,tmp103";
reg = <0x70>;
};
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&usbotg1 {
dr_mode = "host";
status = "okay";
};
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
cd-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
vmmc-supply = <&reg_3v2>;
no-1-8-v;
disable-wp;
cap-sd-highspeed;
no-mmc;
no-sdio;
status = "okay";
};
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
bus-width = <8>;
no-1-8-v;
non-removable;
no-sd;
no-sdio;
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
pinctrl_can1: can1grp {
fsl,pins = <
MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0
MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0
/* SR */
MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x0b0b0
/* TERM */
MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x0b0b0
/* nSMBALERT */
MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x0b0b0
>;
};
pinctrl_can2: can2grp {
fsl,pins = <
MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x0b0b0
MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x0b0b0
/* SR */
MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0b0b0
>;
};
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <
MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK 0x0b0b0
MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x000b1
MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI 0x0b0b0
MX6UL_PAD_CSI_DATA07__ECSPI1_MISO 0x0b0b0
>;
};
pinctrl_ecspi2: ecspi2grp {
fsl,pins = <
MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK 0x0b0b0
MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x000b1
MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI 0x0b0b0
MX6UL_PAD_CSI_DATA03__ECSPI2_MISO 0x0b0b0
>;
};
pinctrl_eth1: eth1grp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0
MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x100b0
MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x100b0
MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0
MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x1b000
/* PHY ENET1_RST */
MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x00880
/* PHY ENET1_IRQ */
MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x00880
>;
};
pinctrl_hog: hoggrp {
fsl,pins = <
/* HW revision detect */
/* REV_ID0 */
MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x1b0b0
/* REV_ID1 */
MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x1b0b0
/* REV_ID2 */
MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x1b0b0
/* REV_ID3 */
MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x1b0b0
/* BOARD_ID0 */
MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13 0x1b0b0
/* BOARD_ID1 */
MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14 0x1b0b0
/* BOARD_ID2 */
MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x1b0b0
/* BOARD_ID3 */
MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12 0x1b0b0
/* Safety controller IO */
/* WAKE_SC */
MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x1b0b0
/* PROGRAM_SC */
MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x1b0b0
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x4001b8b0
MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x4001b8b0
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6UL_PAD_CSI_VSYNC__I2C2_SDA 0x4001b8b0
MX6UL_PAD_CSI_HSYNC__I2C2_SCL 0x4001b8b0
>;
};
pinctrl_leds: ledsgrp {
fsl,pins = <
MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x1b0b0
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x070b1
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x07099
MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x070b1
MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x070b1
MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x070b1
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x070b1
/* SD1 CD */
MX6UL_PAD_NAND_READY_B__GPIO4_IO12 0x170b0
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9
MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9
MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9
MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9
MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9
MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9
MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170f9
MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170f9
MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170f9
MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170f9
MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x170b0
>;
};
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7