[SCSI] qla4xxx: Capture minidump for ISP82XX on firmware failure

Added support to capture dump (Minidump) which allows us to
catpure a snapshot of the firmware/hardware states at the time
of firmware failure
Signed-off-by: Tej Parkash <tej.parkash@qlogic.com>
Signed-off-by: Shyam Sundar <shyam.sundar@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

drivers/scsi/qla4xxx/ql4_attr.c

@@ -9,6 +9,140 @@
 #include "ql4_glbl.h"
 #include "ql4_dbg.h"
 
+static ssize_t
+qla4_8xxx_sysfs_read_fw_dump(struct file *filep, struct kobject *kobj,
+			     struct bin_attribute *ba, char *buf, loff_t off,
+			     size_t count)
+{
+	struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj,
+					       struct device, kobj)));
+
+	if (!is_qla8022(ha))
+		return -EINVAL;
+
+	if (!test_bit(AF_82XX_DUMP_READING, &ha->flags))
+		return 0;
+
+	return memory_read_from_buffer(buf, count, &off, ha->fw_dump,
+				       ha->fw_dump_size);
+}
+
+static ssize_t
+qla4_8xxx_sysfs_write_fw_dump(struct file *filep, struct kobject *kobj,
+			      struct bin_attribute *ba, char *buf, loff_t off,
+			      size_t count)
+{
+	struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj,
+					       struct device, kobj)));
+	uint32_t dev_state;
+	long reading;
+	int ret = 0;
+
+	if (!is_qla8022(ha))
+		return -EINVAL;
+
+	if (off != 0)
+		return ret;
+
+	buf[1] = 0;
+	ret = kstrtol(buf, 10, &reading);
+	if (ret) {
+		ql4_printk(KERN_ERR, ha, "%s: Invalid input. Return err %d\n",
+			   __func__, ret);
+		return ret;
+	}
+
+	switch (reading) {
+	case 0:
+		/* clear dump collection flags */
+		if (test_and_clear_bit(AF_82XX_DUMP_READING, &ha->flags)) {
+			clear_bit(AF_82XX_FW_DUMPED, &ha->flags);
+			/* Reload minidump template */
+			qla4xxx_alloc_fw_dump(ha);
+			DEBUG2(ql4_printk(KERN_INFO, ha,
+					  "Firmware template reloaded\n"));
+		}
+		break;
+	case 1:
+		/* Set flag to read dump */
+		if (test_bit(AF_82XX_FW_DUMPED, &ha->flags) &&
+		    !test_bit(AF_82XX_DUMP_READING, &ha->flags)) {
+			set_bit(AF_82XX_DUMP_READING, &ha->flags);
+			DEBUG2(ql4_printk(KERN_INFO, ha,
+					  "Raw firmware dump ready for read on (%ld).\n",
+					  ha->host_no));
+		}
+		break;
+	case 2:
+		/* Reset HBA */
+		qla4_8xxx_idc_lock(ha);
+		dev_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DEV_STATE);
+		if (dev_state == QLA82XX_DEV_READY) {
+			ql4_printk(KERN_INFO, ha,
+				   "%s: Setting Need reset, reset_owner is 0x%x.\n",
+				   __func__, ha->func_num);
+			qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE,
+					QLA82XX_DEV_NEED_RESET);
+			set_bit(AF_82XX_RST_OWNER, &ha->flags);
+		} else
+			ql4_printk(KERN_INFO, ha,
+				   "%s: Reset not performed as device state is 0x%x\n",
+				   __func__, dev_state);
+
+		qla4_8xxx_idc_unlock(ha);
+		break;
+	default:
+		/* do nothing */
+		break;
+	}
+
+	return count;
+}
+
+static struct bin_attribute sysfs_fw_dump_attr = {
+	.attr = {
+		.name = "fw_dump",
+		.mode = S_IRUSR | S_IWUSR,
+	},
+	.size = 0,
+	.read = qla4_8xxx_sysfs_read_fw_dump,
+	.write = qla4_8xxx_sysfs_write_fw_dump,
+};
+
+static struct sysfs_entry {
+	char *name;
+	struct bin_attribute *attr;
+} bin_file_entries[] = {
+	{ "fw_dump", &sysfs_fw_dump_attr },
+	{ NULL },
+};
+
+void qla4_8xxx_alloc_sysfs_attr(struct scsi_qla_host *ha)
+{
+	struct Scsi_Host *host = ha->host;
+	struct sysfs_entry *iter;
+	int ret;
+
+	for (iter = bin_file_entries; iter->name; iter++) {
+		ret = sysfs_create_bin_file(&host->shost_gendev.kobj,
+					    iter->attr);
+		if (ret)
+			ql4_printk(KERN_ERR, ha,
+				   "Unable to create sysfs %s binary attribute (%d).\n",
+				   iter->name, ret);
+	}
+}
+
+void qla4_8xxx_free_sysfs_attr(struct scsi_qla_host *ha)
+{
+	struct Scsi_Host *host = ha->host;
+	struct sysfs_entry *iter;
+
+	for (iter = bin_file_entries; iter->name; iter++)
+		sysfs_remove_bin_file(&host->shost_gendev.kobj,
+				      iter->attr);
+}
+
 /* Scsi_Host attributes. */
 static ssize_t
 qla4xxx_fw_version_show(struct device *dev,

drivers/scsi/qla4xxx/ql4_def.h

@@ -398,6 +398,16 @@ struct isp_operations {
 	int (*get_sys_info) (struct scsi_qla_host *);
 };
 
+struct ql4_mdump_size_table {
+	uint32_t size;
+	uint32_t size_cmask_02;
+	uint32_t size_cmask_04;
+	uint32_t size_cmask_08;
+	uint32_t size_cmask_10;
+	uint32_t size_cmask_FF;
+	uint32_t version;
+};
+
 /*qla4xxx ipaddress configuration details */
 struct ipaddress_config {
 	uint16_t ipv4_options;
@@ -485,6 +495,10 @@ struct scsi_qla_host {
 #define AF_EEH_BUSY			20 /* 0x00100000 */
 #define AF_PCI_CHANNEL_IO_PERM_FAILURE	21 /* 0x00200000 */
 #define AF_BUILD_DDB_LIST		22 /* 0x00400000 */
+#define AF_82XX_FW_DUMPED		24 /* 0x01000000 */
+#define AF_82XX_RST_OWNER		25 /* 0x02000000 */
+#define AF_82XX_DUMP_READING		26 /* 0x04000000 */
+
 	unsigned long dpc_flags;
 
 #define DPC_RESET_HA			1 /* 0x00000002 */
@@ -662,6 +676,11 @@ struct scsi_qla_host {
 
 	uint32_t nx_dev_init_timeout;
 	uint32_t nx_reset_timeout;
+	void *fw_dump;
+	uint32_t fw_dump_size;
+	uint32_t fw_dump_capture_mask;
+	void *fw_dump_tmplt_hdr;
+	uint32_t fw_dump_tmplt_size;
 
 	struct completion mbx_intr_comp;
 
@@ -936,4 +955,7 @@ static inline int ql4xxx_reset_active(struct scsi_qla_host *ha)
 #define PROCESS_ALL_AENS	 0
 #define FLUSH_DDB_CHANGED_AENS	 1
 
+/* Defines for udev events */
+#define QL4_UEVENT_CODE_FW_DUMP		0
+
 #endif	/*_QLA4XXX_H */

drivers/scsi/qla4xxx/ql4_fw.h

@@ -385,6 +385,11 @@ struct qla_flt_region {
 #define MBOX_CMD_GET_IP_ADDR_STATE		0x0091
 #define MBOX_CMD_SEND_IPV6_ROUTER_SOL		0x0092
 #define MBOX_CMD_GET_DB_ENTRY_CURRENT_IP_ADDR	0x0093
+#define MBOX_CMD_MINIDUMP			0x0129
+
+/* Minidump subcommand */
+#define MINIDUMP_GET_SIZE_SUBCOMMAND		0x00
+#define MINIDUMP_GET_TMPLT_SUBCOMMAND		0x01
 
 /* Mailbox 1 */
 #define FW_STATE_READY				0x0000
@@ -1190,4 +1195,27 @@ struct ql_iscsi_stats {
 	uint8_t reserved2[264]; /* 0x0308 - 0x040F */
 };
 
+#define QLA82XX_DBG_STATE_ARRAY_LEN		16
+#define QLA82XX_DBG_CAP_SIZE_ARRAY_LEN		8
+#define QLA82XX_DBG_RSVD_ARRAY_LEN		8
+
+struct qla4_8xxx_minidump_template_hdr {
+	uint32_t entry_type;
+	uint32_t first_entry_offset;
+	uint32_t size_of_template;
+	uint32_t capture_debug_level;
+	uint32_t num_of_entries;
+	uint32_t version;
+	uint32_t driver_timestamp;
+	uint32_t checksum;
+
+	uint32_t driver_capture_mask;
+	uint32_t driver_info_word2;
+	uint32_t driver_info_word3;
+	uint32_t driver_info_word4;
+
+	uint32_t saved_state_array[QLA82XX_DBG_STATE_ARRAY_LEN];
+	uint32_t capture_size_array[QLA82XX_DBG_CAP_SIZE_ARRAY_LEN];
+};
+
 #endif /*  _QLA4X_FW_H */

drivers/scsi/qla4xxx/ql4_glbl.h

@@ -196,10 +196,18 @@ int qla4xxx_bsg_request(struct bsg_job *bsg_job);
 int qla4xxx_process_vendor_specific(struct bsg_job *bsg_job);
 
 void qla4xxx_arm_relogin_timer(struct ddb_entry *ddb_entry);
+int qla4xxx_get_minidump_template(struct scsi_qla_host *ha,
+				  dma_addr_t phys_addr);
+int qla4xxx_req_template_size(struct scsi_qla_host *ha);
+void qla4_8xxx_alloc_sysfs_attr(struct scsi_qla_host *ha);
+void qla4_8xxx_free_sysfs_attr(struct scsi_qla_host *ha);
+void qla4xxx_alloc_fw_dump(struct scsi_qla_host *ha);
 
 extern int ql4xextended_error_logging;
 extern int ql4xdontresethba;
 extern int ql4xenablemsix;
+extern int ql4xmdcapmask;
+extern int ql4xenablemd;
 
 extern struct device_attribute *qla4xxx_host_attrs[];
 #endif /* _QLA4x_GBL_H */

drivers/scsi/qla4xxx/ql4_init.c

@@ -277,6 +277,94 @@ qla4xxx_wait_for_ip_config(struct scsi_qla_host *ha)
 	return ipv4_wait|ipv6_wait;
 }
 
+/**
+ * qla4xxx_alloc_fw_dump - Allocate memory for minidump data.
+ * @ha: pointer to host adapter structure.
+ **/
+void qla4xxx_alloc_fw_dump(struct scsi_qla_host *ha)
+{
+	int status;
+	uint32_t capture_debug_level;
+	int hdr_entry_bit, k;
+	void *md_tmp;
+	dma_addr_t md_tmp_dma;
+	struct qla4_8xxx_minidump_template_hdr *md_hdr;
+
+	if (ha->fw_dump) {
+		ql4_printk(KERN_WARNING, ha,
+			   "Firmware dump previously allocated.\n");
+		return;
+	}
+
+	status = qla4xxx_req_template_size(ha);
+	if (status != QLA_SUCCESS) {
+		ql4_printk(KERN_INFO, ha,
+			   "scsi%ld: Failed to get template size\n",
+			   ha->host_no);
+		return;
+	}
+
+	clear_bit(AF_82XX_FW_DUMPED, &ha->flags);
+
+	/* Allocate memory for saving the template */
+	md_tmp = dma_alloc_coherent(&ha->pdev->dev, ha->fw_dump_tmplt_size,
+				    &md_tmp_dma, GFP_KERNEL);
+
+	/* Request template */
+	status =  qla4xxx_get_minidump_template(ha, md_tmp_dma);
+	if (status != QLA_SUCCESS) {
+		ql4_printk(KERN_INFO, ha,
+			   "scsi%ld: Failed to get minidump template\n",
+			   ha->host_no);
+		goto alloc_cleanup;
+	}
+
+	md_hdr = (struct qla4_8xxx_minidump_template_hdr *)md_tmp;
+
+	capture_debug_level = md_hdr->capture_debug_level;
+
+	/* Get capture mask based on module loadtime setting. */
+	if (ql4xmdcapmask >= 0x3 && ql4xmdcapmask <= 0x7F)
+		ha->fw_dump_capture_mask = ql4xmdcapmask;
+	else
+		ha->fw_dump_capture_mask = capture_debug_level;
+
+	md_hdr->driver_capture_mask = ha->fw_dump_capture_mask;
+
+	DEBUG2(ql4_printk(KERN_INFO, ha, "Minimum num of entries = %d\n",
+			  md_hdr->num_of_entries));
+	DEBUG2(ql4_printk(KERN_INFO, ha, "Dump template size  = %d\n",
+			  ha->fw_dump_tmplt_size));
+	DEBUG2(ql4_printk(KERN_INFO, ha, "Selected Capture mask =0x%x\n",
+			  ha->fw_dump_capture_mask));
+
+	/* Calculate fw_dump_size */
+	for (hdr_entry_bit = 0x2, k = 1; (hdr_entry_bit & 0xFF);
+	     hdr_entry_bit <<= 1, k++) {
+		if (hdr_entry_bit & ha->fw_dump_capture_mask)
+			ha->fw_dump_size += md_hdr->capture_size_array[k];
+	}
+
+	/* Total firmware dump size including command header */
+	ha->fw_dump_size += ha->fw_dump_tmplt_size;
+	ha->fw_dump = vmalloc(ha->fw_dump_size);
+	if (!ha->fw_dump)
+		goto alloc_cleanup;
+
+	DEBUG2(ql4_printk(KERN_INFO, ha,
+			  "Minidump Tempalate Size = 0x%x KB\n",
+			  ha->fw_dump_tmplt_size));
+	DEBUG2(ql4_printk(KERN_INFO, ha,
+			  "Total Minidump size = 0x%x KB\n", ha->fw_dump_size));
+
+	memcpy(ha->fw_dump, md_tmp, ha->fw_dump_tmplt_size);
+	ha->fw_dump_tmplt_hdr = ha->fw_dump;
+
+alloc_cleanup:
+	dma_free_coherent(&ha->pdev->dev, ha->fw_dump_tmplt_size,
+			  md_tmp, md_tmp_dma);
+}
+
 static int qla4xxx_fw_ready(struct scsi_qla_host *ha)
 {
 	uint32_t timeout_count;
@@ -445,9 +533,13 @@ static int qla4xxx_init_firmware(struct scsi_qla_host *ha)
 			      "control block\n", ha->host_no, __func__));
 		return status;
 	}
+
 	if (!qla4xxx_fw_ready(ha))
 		return status;
 
+	if (is_qla8022(ha) && !test_bit(AF_INIT_DONE, &ha->flags))
+		qla4xxx_alloc_fw_dump(ha);
+
 	return qla4xxx_get_firmware_status(ha);
 }
 

drivers/scsi/qla4xxx/ql4_mbx.c

@@ -270,6 +270,79 @@ int qla4xxx_mailbox_command(struct scsi_qla_host *ha, uint8_t inCount,
 	return status;
 }
 
+/**
+ * qla4xxx_get_minidump_template - Get the firmware template
+ * @ha: Pointer to host adapter structure.
+ * @phys_addr: dma address for template
+ *
+ * Obtain the minidump template from firmware during initialization
+ * as it may not be available when minidump is desired.
+ **/
+int qla4xxx_get_minidump_template(struct scsi_qla_host *ha,
+				  dma_addr_t phys_addr)
+{
+	uint32_t mbox_cmd[MBOX_REG_COUNT];
+	uint32_t mbox_sts[MBOX_REG_COUNT];
+	int status;
+
+	memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+	memset(&mbox_sts, 0, sizeof(mbox_sts));
+
+	mbox_cmd[0] = MBOX_CMD_MINIDUMP;
+	mbox_cmd[1] = MINIDUMP_GET_TMPLT_SUBCOMMAND;
+	mbox_cmd[2] = LSDW(phys_addr);
+	mbox_cmd[3] = MSDW(phys_addr);
+	mbox_cmd[4] = ha->fw_dump_tmplt_size;
+	mbox_cmd[5] = 0;
+
+	status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 2, &mbox_cmd[0],
+					 &mbox_sts[0]);
+	if (status != QLA_SUCCESS) {
+		DEBUG2(ql4_printk(KERN_INFO, ha,
+				  "scsi%ld: %s: Cmd = %08X, mbx[0] = 0x%04x, mbx[1] = 0x%04x\n",
+				  ha->host_no, __func__, mbox_cmd[0],
+				  mbox_sts[0], mbox_sts[1]));
+	}
+	return status;
+}
+
+/**
+ * qla4xxx_req_template_size - Get minidump template size from firmware.
+ * @ha: Pointer to host adapter structure.
+ **/
+int qla4xxx_req_template_size(struct scsi_qla_host *ha)
+{
+	uint32_t mbox_cmd[MBOX_REG_COUNT];
+	uint32_t mbox_sts[MBOX_REG_COUNT];
+	int status;
+
+	memset(&mbox_cmd, 0, sizeof(mbox_cmd));
+	memset(&mbox_sts, 0, sizeof(mbox_sts));
+
+	mbox_cmd[0] = MBOX_CMD_MINIDUMP;
+	mbox_cmd[1] = MINIDUMP_GET_SIZE_SUBCOMMAND;
+
+	status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 8, &mbox_cmd[0],
+					 &mbox_sts[0]);
+	if (status == QLA_SUCCESS) {
+		ha->fw_dump_tmplt_size = mbox_sts[1];
+		DEBUG2(ql4_printk(KERN_INFO, ha,
+				  "%s: sts[0]=0x%04x, template  size=0x%04x, size_cm_02=0x%04x, size_cm_04=0x%04x, size_cm_08=0x%04x, size_cm_10=0x%04x, size_cm_FF=0x%04x, version=0x%04x\n",
+				  __func__, mbox_sts[0], mbox_sts[1],
+				  mbox_sts[2], mbox_sts[3], mbox_sts[4],
+				  mbox_sts[5], mbox_sts[6], mbox_sts[7]));
+		if (ha->fw_dump_tmplt_size == 0)
+			status = QLA_ERROR;
+	} else {
+		ql4_printk(KERN_WARNING, ha,
+			   "%s: Error sts[0]=0x%04x, mbx[1]=0x%04x\n",
+			   __func__, mbox_sts[0], mbox_sts[1]);
+		status = QLA_ERROR;
+	}
+
+	return status;
+}
+
 void qla4xxx_mailbox_premature_completion(struct scsi_qla_host *ha)
 {
 	set_bit(AF_FW_RECOVERY, &ha->flags);

drivers/scsi/qla4xxx/ql4_nx.h

@@ -792,4 +792,196 @@ struct crb_addr_pair {
 #define MIU_TEST_AGT_WRDATA_UPPER_LO	(0x0b0)
 #define	MIU_TEST_AGT_WRDATA_UPPER_HI	(0x0b4)
 
+/* Minidump related */
+
+/* Entry Type Defines */
+#define QLA82XX_RDNOP	0
+#define QLA82XX_RDCRB	1
+#define QLA82XX_RDMUX	2
+#define QLA82XX_QUEUE	3
+#define QLA82XX_BOARD	4
+#define QLA82XX_RDOCM	6
+#define QLA82XX_PREGS	7
+#define QLA82XX_L1DTG	8
+#define QLA82XX_L1ITG	9
+#define QLA82XX_L1DAT	11
+#define QLA82XX_L1INS	12
+#define QLA82XX_L2DTG	21
+#define QLA82XX_L2ITG	22
+#define QLA82XX_L2DAT	23
+#define QLA82XX_L2INS	24
+#define QLA82XX_RDROM	71
+#define QLA82XX_RDMEM	72
+#define QLA82XX_CNTRL	98
+#define QLA82XX_RDEND	255
+
+/* Opcodes for Control Entries.
+ * These Flags are bit fields.
+ */
+#define QLA82XX_DBG_OPCODE_WR		0x01
+#define QLA82XX_DBG_OPCODE_RW		0x02
+#define QLA82XX_DBG_OPCODE_AND		0x04
+#define QLA82XX_DBG_OPCODE_OR		0x08
+#define QLA82XX_DBG_OPCODE_POLL		0x10
+#define QLA82XX_DBG_OPCODE_RDSTATE	0x20
+#define QLA82XX_DBG_OPCODE_WRSTATE	0x40
+#define QLA82XX_DBG_OPCODE_MDSTATE	0x80
+
+/* Driver Flags */
+#define QLA82XX_DBG_SKIPPED_FLAG	0x80 /* driver skipped this entry  */
+#define QLA82XX_DBG_SIZE_ERR_FLAG	0x40 /* Entry vs Capture size
+					      * mismatch */
+
+/* Driver_code is for driver to write some info about the entry
+ * currently not used.
+ */
+struct qla82xx_minidump_entry_hdr {
+	uint32_t entry_type;
+	uint32_t entry_size;
+	uint32_t entry_capture_size;
+	struct {
+		uint8_t entry_capture_mask;
+		uint8_t entry_code;
+		uint8_t driver_code;
+		uint8_t driver_flags;
+	} d_ctrl;
+};
+
+/*  Read CRB entry header */
+struct qla82xx_minidump_entry_crb {
+	struct qla82xx_minidump_entry_hdr h;
+	uint32_t addr;
+	struct {
+		uint8_t addr_stride;
+		uint8_t state_index_a;
+		uint16_t poll_timeout;
+	} crb_strd;
+	uint32_t data_size;
+	uint32_t op_count;
+
+	struct {
+		uint8_t opcode;
+		uint8_t state_index_v;
+		uint8_t shl;
+		uint8_t shr;
+	} crb_ctrl;
+
+	uint32_t value_1;
+	uint32_t value_2;
+	uint32_t value_3;
+};
+
+struct qla82xx_minidump_entry_cache {
+	struct qla82xx_minidump_entry_hdr h;
+	uint32_t tag_reg_addr;
+	struct {
+		uint16_t tag_value_stride;
+		uint16_t init_tag_value;
+	} addr_ctrl;
+	uint32_t data_size;
+	uint32_t op_count;
+	uint32_t control_addr;
+	struct {
+		uint16_t write_value;
+		uint8_t poll_mask;
+		uint8_t poll_wait;
+	} cache_ctrl;
+	uint32_t read_addr;
+	struct {
+		uint8_t read_addr_stride;
+		uint8_t read_addr_cnt;
+		uint16_t rsvd_1;
+	} read_ctrl;
+};
+
+/* Read OCM */
+struct qla82xx_minidump_entry_rdocm {
+	struct qla82xx_minidump_entry_hdr h;
+	uint32_t rsvd_0;
+	uint32_t rsvd_1;
+	uint32_t data_size;
+	uint32_t op_count;
+	uint32_t rsvd_2;
+	uint32_t rsvd_3;
+	uint32_t read_addr;
+	uint32_t read_addr_stride;
+};
+
+/* Read Memory */
+struct qla82xx_minidump_entry_rdmem {
+	struct qla82xx_minidump_entry_hdr h;
+	uint32_t rsvd[6];
+	uint32_t read_addr;
+	uint32_t read_data_size;
+};
+
+/* Read ROM */
+struct qla82xx_minidump_entry_rdrom {
+	struct qla82xx_minidump_entry_hdr h;
+	uint32_t rsvd[6];
+	uint32_t read_addr;
+	uint32_t read_data_size;
+};
+
+/* Mux entry */
+struct qla82xx_minidump_entry_mux {
+	struct qla82xx_minidump_entry_hdr h;
+	uint32_t select_addr;
+	uint32_t rsvd_0;
+	uint32_t data_size;
+	uint32_t op_count;
+	uint32_t select_value;
+	uint32_t select_value_stride;
+	uint32_t read_addr;
+	uint32_t rsvd_1;
+};
+
+/* Queue entry */
+struct qla82xx_minidump_entry_queue {
+	struct qla82xx_minidump_entry_hdr h;
+	uint32_t select_addr;
+	struct {
+		uint16_t queue_id_stride;
+		uint16_t rsvd_0;
+	} q_strd;
+	uint32_t data_size;
+	uint32_t op_count;
+	uint32_t rsvd_1;
+	uint32_t rsvd_2;
+	uint32_t read_addr;
+	struct {
+		uint8_t read_addr_stride;
+		uint8_t read_addr_cnt;
+		uint16_t rsvd_3;
+	} rd_strd;
+};
+
+#define QLA82XX_MINIDUMP_OCM0_SIZE		(256 * 1024)
+#define QLA82XX_MINIDUMP_L1C_SIZE		(256 * 1024)
+#define QLA82XX_MINIDUMP_L2C_SIZE		1572864
+#define QLA82XX_MINIDUMP_COMMON_STR_SIZE	0
+#define QLA82XX_MINIDUMP_FCOE_STR_SIZE		0
+#define QLA82XX_MINIDUMP_MEM_SIZE		0
+#define QLA82XX_MAX_ENTRY_HDR			4
+
+struct qla82xx_minidump {
+	uint32_t md_ocm0_data[QLA82XX_MINIDUMP_OCM0_SIZE];
+	uint32_t md_l1c_data[QLA82XX_MINIDUMP_L1C_SIZE];
+	uint32_t md_l2c_data[QLA82XX_MINIDUMP_L2C_SIZE];
+	uint32_t md_cs_data[QLA82XX_MINIDUMP_COMMON_STR_SIZE];
+	uint32_t md_fcoes_data[QLA82XX_MINIDUMP_FCOE_STR_SIZE];
+	uint32_t md_mem_data[QLA82XX_MINIDUMP_MEM_SIZE];
+};
+
+#define MBC_DIAGNOSTIC_MINIDUMP_TEMPLATE	0x129
+#define RQST_TMPLT_SIZE				0x0
+#define RQST_TMPLT				0x1
+#define MD_DIRECT_ROM_WINDOW			0x42110030
+#define MD_DIRECT_ROM_READ_BASE			0x42150000
+#define MD_MIU_TEST_AGT_CTRL			0x41000090
+#define MD_MIU_TEST_AGT_ADDR_LO			0x41000094
+#define MD_MIU_TEST_AGT_ADDR_HI			0x41000098
+
+static const int MD_MIU_TEST_AGT_RDDATA[] = { 0x410000A8,
+				0x410000AC, 0x410000B8, 0x410000BC };
 #endif

drivers/scsi/qla4xxx/ql4_os.c

@@ -82,6 +82,20 @@ MODULE_PARM_DESC(ql4xsess_recovery_tmo,
 		" Target Session Recovery Timeout.\n"
 		"\t\t  Default: 120 sec.");
 
+int ql4xmdcapmask = 0x1F;
+module_param(ql4xmdcapmask, int, S_IRUGO);
+MODULE_PARM_DESC(ql4xmdcapmask,
+		 " Set the Minidump driver capture mask level.\n"
+		 "\t\t  Default is 0x1F.\n"
+		 "\t\t  Can be set to 0x3, 0x7, 0xF, 0x1F, 0x3F, 0x7F");
+
+int ql4xenablemd = 1;
+module_param(ql4xenablemd, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(ql4xenablemd,
+		 " Set to enable minidump.\n"
+		 "\t\t  0 - disable minidump\n"
+		 "\t\t  1 - enable minidump (Default)");
+
 static int qla4xxx_wait_for_hba_online(struct scsi_qla_host *ha);
 /*
  * SCSI host template entry points
@@ -2265,6 +2279,9 @@ static void qla4xxx_mem_free(struct scsi_qla_host *ha)
 		dma_free_coherent(&ha->pdev->dev, ha->queues_len, ha->queues,
 				  ha->queues_dma);
 
+	 if (ha->fw_dump)
+		vfree(ha->fw_dump);
+
 	ha->queues_len = 0;
 	ha->queues = NULL;
 	ha->queues_dma = 0;
@@ -2274,6 +2291,8 @@ static void qla4xxx_mem_free(struct scsi_qla_host *ha)
 	ha->response_dma = 0;
 	ha->shadow_regs = NULL;
 	ha->shadow_regs_dma = 0;
+	ha->fw_dump = NULL;
+	ha->fw_dump_size = 0;
 
 	/* Free srb pool. */
 	if (ha->srb_mempool)
@@ -5068,6 +5087,8 @@ static int __devinit qla4xxx_probe_adapter(struct pci_dev *pdev,
 
 	set_bit(AF_INIT_DONE, &ha->flags);
 
+	qla4_8xxx_alloc_sysfs_attr(ha);
+
 	printk(KERN_INFO
 	       " QLogic iSCSI HBA Driver version: %s\n"
 	       "  QLogic ISP%04x @ %s, host#=%ld, fw=%02d.%02d.%02d.%02d\n",
@@ -5194,6 +5215,7 @@ static void __devexit qla4xxx_remove_adapter(struct pci_dev *pdev)
 		iscsi_boot_destroy_kset(ha->boot_kset);
 
 	qla4xxx_destroy_fw_ddb_session(ha);
+	qla4_8xxx_free_sysfs_attr(ha);
 
 	scsi_remove_host(ha->host);