staging: et131x: Turn a few more LongCapitalisedThings into Linuxish names

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/et131x/et1310_eeprom.c

@@ -396,12 +396,12 @@ int et131x_init_eeprom(struct et131x_adapter *etdev)
 	/* Read the EEPROM for information regarding LED behavior. Refer to
 	 * ET1310_phy.c, et131x_xcvr_init(), for its use.
 	 */
-	eeprom_read(etdev, 0x70, &etdev->eepromData[0]);
-	eeprom_read(etdev, 0x71, &etdev->eepromData[1]);
+	eeprom_read(etdev, 0x70, &etdev->eeprom_data[0]);
+	eeprom_read(etdev, 0x71, &etdev->eeprom_data[1]);
 
-	if (etdev->eepromData[0] != 0xcd)
+	if (etdev->eeprom_data[0] != 0xcd)
 		/* Disable all optional features */
-		etdev->eepromData[1] = 0x00;
+		etdev->eeprom_data[1] = 0x00;
 
 	return 0;
 }

drivers/staging/et131x/et1310_mac.c

@@ -136,12 +136,12 @@ void ConfigMACRegs1(struct et131x_adapter *etdev)
 	 * station address is used for generating and checking pause control
 	 * packets.
 	 */
-	station2.bits.Octet1 = etdev->CurrentAddress[0];
-	station2.bits.Octet2 = etdev->CurrentAddress[1];
-	station1.bits.Octet3 = etdev->CurrentAddress[2];
-	station1.bits.Octet4 = etdev->CurrentAddress[3];
-	station1.bits.Octet5 = etdev->CurrentAddress[4];
-	station1.bits.Octet6 = etdev->CurrentAddress[5];
+	station2.bits.Octet1 = etdev->addr[0];
+	station2.bits.Octet2 = etdev->addr[1];
+	station1.bits.Octet3 = etdev->addr[2];
+	station1.bits.Octet4 = etdev->addr[3];
+	station1.bits.Octet5 = etdev->addr[4];
+	station1.bits.Octet6 = etdev->addr[5];
 	writel(station1.value, &pMac->station_addr_1.value);
 	writel(station2.value, &pMac->station_addr_2.value);
 
@@ -280,14 +280,14 @@ void ConfigRxMacRegs(struct et131x_adapter *etdev)
 	writel(0, &pRxMac->mask4_word3);
 
 	/* Lets setup the WOL Source Address */
-	sa_lo.bits.sa3 = etdev->CurrentAddress[2];
-	sa_lo.bits.sa4 = etdev->CurrentAddress[3];
-	sa_lo.bits.sa5 = etdev->CurrentAddress[4];
-	sa_lo.bits.sa6 = etdev->CurrentAddress[5];
+	sa_lo.bits.sa3 = etdev->addr[2];
+	sa_lo.bits.sa4 = etdev->addr[3];
+	sa_lo.bits.sa5 = etdev->addr[4];
+	sa_lo.bits.sa6 = etdev->addr[5];
 	writel(sa_lo.value, &pRxMac->sa_lo.value);
 
-	sa_hi.bits.sa1 = etdev->CurrentAddress[0];
-	sa_hi.bits.sa2 = etdev->CurrentAddress[1];
+	sa_hi.bits.sa1 = etdev->addr[0];
+	sa_hi.bits.sa2 = etdev->addr[1];
 	writel(sa_hi.value, &pRxMac->sa_hi.value);
 
 	/* Disable all Packet Filtering */
@@ -597,20 +597,20 @@ void SetupDeviceForUnicast(struct et131x_adapter *etdev)
 	 * Set up unicast packet filter reg 3 to be the octets 2 - 5 of the
 	 * MAC address for first address
 	 */
-	uni_pf3.bits.addr1_1 = etdev->CurrentAddress[0];
-	uni_pf3.bits.addr1_2 = etdev->CurrentAddress[1];
-	uni_pf3.bits.addr2_1 = etdev->CurrentAddress[0];
-	uni_pf3.bits.addr2_2 = etdev->CurrentAddress[1];
-
-	uni_pf2.bits.addr2_3 = etdev->CurrentAddress[2];
-	uni_pf2.bits.addr2_4 = etdev->CurrentAddress[3];
-	uni_pf2.bits.addr2_5 = etdev->CurrentAddress[4];
-	uni_pf2.bits.addr2_6 = etdev->CurrentAddress[5];
-
-	uni_pf1.bits.addr1_3 = etdev->CurrentAddress[2];
-	uni_pf1.bits.addr1_4 = etdev->CurrentAddress[3];
-	uni_pf1.bits.addr1_5 = etdev->CurrentAddress[4];
-	uni_pf1.bits.addr1_6 = etdev->CurrentAddress[5];
+	uni_pf3.bits.addr1_1 = etdev->addr[0];
+	uni_pf3.bits.addr1_2 = etdev->addr[1];
+	uni_pf3.bits.addr2_1 = etdev->addr[0];
+	uni_pf3.bits.addr2_2 = etdev->addr[1];
+
+	uni_pf2.bits.addr2_3 = etdev->addr[2];
+	uni_pf2.bits.addr2_4 = etdev->addr[3];
+	uni_pf2.bits.addr2_5 = etdev->addr[4];
+	uni_pf2.bits.addr2_6 = etdev->addr[5];
+
+	uni_pf1.bits.addr1_3 = etdev->addr[2];
+	uni_pf1.bits.addr1_4 = etdev->addr[3];
+	uni_pf1.bits.addr1_5 = etdev->addr[4];
+	uni_pf1.bits.addr1_6 = etdev->addr[5];
 
 	pm_csr = readl(&etdev->regs->global.pm_csr);
 	if ((pm_csr & ET_PM_PHY_SW_COMA) == 0) {

drivers/staging/et131x/et1310_phy.c

@@ -604,10 +604,10 @@ static void et131x_xcvr_init(struct et131x_adapter *etdev)
 	 * vendors; The LED behavior is now determined by vendor data in the
 	 * EEPROM. However, the above description is the default.
 	 */
-	if ((etdev->eepromData[1] & 0x4) == 0) {
+	if ((etdev->eeprom_data[1] & 0x4) == 0) {
 		MiRead(etdev, (u8) offsetof(MI_REGS_t, lcr2),
 		       &lcr2.value);
-		if ((etdev->eepromData[1] & 0x8) == 0)
+		if ((etdev->eeprom_data[1] & 0x8) == 0)
 			lcr2.bits.led_tx_rx = 0x3;
 		else
 			lcr2.bits.led_tx_rx = 0x4;

drivers/staging/et131x/et1310_pm.c

@@ -109,9 +109,9 @@
 void EnablePhyComa(struct et131x_adapter *etdev)
 {
 	unsigned long flags;
-	u32 GlobalPmCSR;
+	u32 pmcsr;
 
-	GlobalPmCSR = readl(&etdev->regs->global.pm_csr);
+	pmcsr = readl(&etdev->regs->global.pm_csr);
 
 	/* Save the GbE PHY speed and duplex modes. Need to restore this
 	 * when cable is plugged back in
@@ -120,19 +120,19 @@ void EnablePhyComa(struct et131x_adapter *etdev)
 	etdev->PoMgmt.PowerDownDuplex = etdev->AiForceDpx;
 
 	/* Stop sending packets. */
-	spin_lock_irqsave(&etdev->SendHWLock, flags);
+	spin_lock_irqsave(&etdev->send_hw_lock, flags);
 	etdev->Flags |= fMP_ADAPTER_LOWER_POWER;
-	spin_unlock_irqrestore(&etdev->SendHWLock, flags);
+	spin_unlock_irqrestore(&etdev->send_hw_lock, flags);
 
 	/* Wait for outstanding Receive packets */
 
 	/* Gate off JAGCore 3 clock domains */
-	GlobalPmCSR &= ~ET_PMCSR_INIT;
-	writel(GlobalPmCSR, &etdev->regs->global.pm_csr);
+	pmcsr &= ~ET_PMCSR_INIT;
+	writel(pmcsr, &etdev->regs->global.pm_csr);
 
 	/* Program gigE PHY in to Coma mode */
-	GlobalPmCSR |= ET_PM_PHY_SW_COMA;
-	writel(GlobalPmCSR, &etdev->regs->global.pm_csr);
+	pmcsr |= ET_PM_PHY_SW_COMA;
+	writel(pmcsr, &etdev->regs->global.pm_csr);
 }
 
 /**
@@ -141,14 +141,14 @@ void EnablePhyComa(struct et131x_adapter *etdev)
  */
 void DisablePhyComa(struct et131x_adapter *etdev)
 {
-	u32 GlobalPmCSR;
+	u32 pmcsr;
 
-	GlobalPmCSR = readl(&etdev->regs->global.pm_csr);
+	pmcsr = readl(&etdev->regs->global.pm_csr);
 
 	/* Disable phy_sw_coma register and re-enable JAGCore clocks */
-	GlobalPmCSR |= ET_PMCSR_INIT;
-	GlobalPmCSR &= ~ET_PM_PHY_SW_COMA;
-	writel(GlobalPmCSR, &etdev->regs->global.pm_csr);
+	pmcsr |= ET_PMCSR_INIT;
+	pmcsr &= ~ET_PM_PHY_SW_COMA;
+	writel(pmcsr, &etdev->regs->global.pm_csr);
 
 	/* Restore the GbE PHY speed and duplex modes;
 	 * Reset JAGCore; re-configure and initialize JAGCore and gigE PHY

drivers/staging/et131x/et1310_rx.c

@@ -622,7 +622,7 @@ void ConfigRxDmaRegs(struct et131x_adapter *etdev)
 	writel((psr_num_des * LO_MARK_PERCENT_FOR_PSR) / 100,
 	       &rx_dma->psr_min_des);
 
-	spin_lock_irqsave(&etdev->RcvLock, flags);
+	spin_lock_irqsave(&etdev->rcv_lock, flags);
 
 	/* These local variables track the PSR in the adapter structure */
 	rx_local->local_psr_full = 0;
@@ -688,7 +688,7 @@ void ConfigRxDmaRegs(struct et131x_adapter *etdev)
 	 */
 	writel(PARM_RX_TIME_INT_DEF, &rx_dma->max_pkt_time);
 
-	spin_unlock_irqrestore(&etdev->RcvLock, flags);
+	spin_unlock_irqrestore(&etdev->rcv_lock, flags);
 }
 
 /**
@@ -854,21 +854,21 @@ PMP_RFD nic_rx_pkts(struct et131x_adapter *etdev)
 	}
 
 	/* Get and fill the RFD. */
-	spin_lock_irqsave(&etdev->RcvLock, flags);
+	spin_lock_irqsave(&etdev->rcv_lock, flags);
 
 	rfd = NULL;
 	element = rx_local->RecvList.next;
 	rfd = (PMP_RFD) list_entry(element, MP_RFD, list_node);
 
 	if (rfd == NULL) {
-		spin_unlock_irqrestore(&etdev->RcvLock, flags);
+		spin_unlock_irqrestore(&etdev->rcv_lock, flags);
 		return NULL;
 	}
 
 	list_del(&rfd->list_node);
 	rx_local->nReadyRecv--;
 
-	spin_unlock_irqrestore(&etdev->RcvLock, flags);
+	spin_unlock_irqrestore(&etdev->rcv_lock, flags);
 
 	rfd->bufferindex = bindex;
 	rfd->ringindex = rindex;
@@ -887,8 +887,7 @@ PMP_RFD nic_rx_pkts(struct et131x_adapter *etdev)
 		if (etdev->ReplicaPhyLoopbk == 1) {
 			buf = rx_local->fbr[rindex]->virt[bindex];
 
-			if (memcmp(&buf[6], &etdev->CurrentAddress[0],
-				   ETH_ALEN) == 0) {
+			if (memcmp(&buf[6], etdev->addr, ETH_ALEN) == 0) {
 				if (memcmp(&buf[42], "Replica packet",
 					   ETH_HLEN)) {
 					etdev->ReplicaPhyLoopbkPF = 1;
@@ -1146,10 +1145,10 @@ void nic_return_rfd(struct et131x_adapter *etdev, PMP_RFD rfd)
 	/* The processing on this RFD is done, so put it back on the tail of
 	 * our list
 	 */
-	spin_lock_irqsave(&etdev->RcvLock, flags);
+	spin_lock_irqsave(&etdev->rcv_lock, flags);
 	list_add_tail(&rfd->list_node, &rx_local->RecvList);
 	rx_local->nReadyRecv++;
-	spin_unlock_irqrestore(&etdev->RcvLock, flags);
+	spin_unlock_irqrestore(&etdev->rcv_lock, flags);
 
 	WARN_ON(rx_local->nReadyRecv > rx_local->NumRfd);
 }

drivers/staging/et131x/et131x_adapter.h

@@ -173,17 +173,17 @@ struct et131x_adapter {
 	u32 HwErrCount;
 
 	/* Configuration  */
-	u8 PermanentAddress[ETH_ALEN];
-	u8 CurrentAddress[ETH_ALEN];
+	u8 rom_addr[ETH_ALEN];
+	u8 addr[ETH_ALEN];
 	bool has_eeprom;
-	u8 eepromData[2];
+	u8 eeprom_data[2];
 
 	/* Spinlocks */
 	spinlock_t Lock;
 
 	spinlock_t TCBSendQLock;
 	spinlock_t TCBReadyQLock;
-	spinlock_t SendHWLock;
+	spinlock_t send_hw_lock;
 
 	spinlock_t RcvLock;
 	spinlock_t RcvPendLock;

drivers/staging/et131x/et131x_initpci.c

@@ -131,32 +131,32 @@ void et131x_hwaddr_init(struct et131x_adapter *adapter)
 	 * EEPROM then we need to generate the last octet and set it on the
 	 * device
 	 */
-	if (adapter->PermanentAddress[0] == 0x00 &&
-	    adapter->PermanentAddress[1] == 0x00 &&
-	    adapter->PermanentAddress[2] == 0x00 &&
-	    adapter->PermanentAddress[3] == 0x00 &&
-	    adapter->PermanentAddress[4] == 0x00 &&
-	    adapter->PermanentAddress[5] == 0x00) {
+	if (adapter->rom_addr[0] == 0x00 &&
+	    adapter->rom_addr[1] == 0x00 &&
+	    adapter->rom_addr[2] == 0x00 &&
+	    adapter->rom_addr[3] == 0x00 &&
+	    adapter->rom_addr[4] == 0x00 &&
+	    adapter->rom_addr[5] == 0x00) {
 		/*
 		 * We need to randomly generate the last octet so we
 		 * decrease our chances of setting the mac address to
 		 * same as another one of our cards in the system
 		 */
-		get_random_bytes(&adapter->CurrentAddress[5], 1);
+		get_random_bytes(&adapter->addr[5], 1);
 		/*
 		 * We have the default value in the register we are
 		 * working with so we need to copy the current
 		 * address into the permanent address
 		 */
-		memcpy(adapter->PermanentAddress,
-			adapter->CurrentAddress, ETH_ALEN);
+		memcpy(adapter->rom_addr,
+			adapter->addr, ETH_ALEN);
 	} else {
 		/* We do not have an override address, so set the
 		 * current address to the permanent address and add
 		 * it to the device
 		 */
-		memcpy(adapter->CurrentAddress,
-		       adapter->PermanentAddress, ETH_ALEN);
+		memcpy(adapter->addr,
+		       adapter->rom_addr, ETH_ALEN);
 	}
 }
 
@@ -193,17 +193,17 @@ static int et131x_pci_init(struct et131x_adapter *adapter,
 	max_payload &= 0x07;	/* Only the lower 3 bits are valid */
 
 	if (max_payload < 2) {
-		static const u16 AckNak[2] = { 0x76, 0xD0 };
-		static const u16 Replay[2] = { 0x1E0, 0x2ED };
+		static const u16 acknak[2] = { 0x76, 0xD0 };
+		static const u16 replay[2] = { 0x1E0, 0x2ED };
 
 		if (pci_write_config_word(pdev, ET1310_PCI_ACK_NACK,
-					       AckNak[max_payload])) {
+					       acknak[max_payload])) {
 			dev_err(&pdev->dev,
 			  "Could not write PCI config space for ACK/NAK\n");
 			return -EIO;
 		}
 		if (pci_write_config_word(pdev, ET1310_PCI_REPLAY,
-					       Replay[max_payload])) {
+					       replay[max_payload])) {
 			dev_err(&pdev->dev,
 			  "Could not write PCI config space for Replay Timer\n");
 			return -EIO;
@@ -245,12 +245,12 @@ static int et131x_pci_init(struct et131x_adapter *adapter,
 
 	for (i = 0; i < ETH_ALEN; i++) {
 		if (pci_read_config_byte(pdev, ET1310_PCI_MAC_ADDRESS + i,
-					adapter->PermanentAddress + i)) {
+					adapter->rom_addr + i)) {
 			dev_err(&pdev->dev, "Could not read PCI config space for MAC address\n");
 			return -EIO;
 		}
 	}
-	memcpy(adapter->CurrentAddress, adapter->PermanentAddress, ETH_ALEN);
+	memcpy(adapter->addr, adapter->rom_addr, ETH_ALEN);
 	return 0;
 }
 
@@ -555,8 +555,8 @@ static struct et131x_adapter *et131x_adapter_init(struct net_device *netdev,
 	spin_lock_init(&etdev->Lock);
 	spin_lock_init(&etdev->TCBSendQLock);
 	spin_lock_init(&etdev->TCBReadyQLock);
-	spin_lock_init(&etdev->SendHWLock);
-	spin_lock_init(&etdev->RcvLock);
+	spin_lock_init(&etdev->send_hw_lock);
+	spin_lock_init(&etdev->rcv_lock);
 	spin_lock_init(&etdev->RcvPendLock);
 	spin_lock_init(&etdev->FbrLock);
 	spin_lock_init(&etdev->PHYLock);
@@ -570,7 +570,7 @@ static struct et131x_adapter *et131x_adapter_init(struct net_device *netdev,
 	etdev->RegistryJumboPacket = 1514;	/* 1514-9216 */
 
 	/* Set the MAC address to a default */
-	memcpy(etdev->CurrentAddress, default_mac, ETH_ALEN);
+	memcpy(etdev->addr, default_mac, ETH_ALEN);
 
 	/* Decode SpeedDuplex
 	 *
@@ -711,7 +711,7 @@ static int __devinit et131x_pci_setup(struct pci_dev *pdev,
 	INIT_WORK(&adapter->task, et131x_isr_handler);
 
 	/* Copy address into the net_device struct */
-	memcpy(netdev->dev_addr, adapter->CurrentAddress, ETH_ALEN);
+	memcpy(netdev->dev_addr, adapter->addr, ETH_ALEN);
 
 	/* Setup et1310 as per the documentation */
 	et131x_adapter_setup(adapter);

drivers/staging/et131x/et131x_netdev.c

@@ -603,7 +603,7 @@ int et131x_change_mtu(struct net_device *netdev, int new_mtu)
 	et131x_init_send(adapter);
 
 	et131x_hwaddr_init(adapter);
-	memcpy(netdev->dev_addr, adapter->CurrentAddress, ETH_ALEN);
+	memcpy(netdev->dev_addr, adapter->addr, ETH_ALEN);
 
 	/* Init the device with the new settings */
 	et131x_adapter_setup(adapter);