Commit 07517529 authored by Atsushi Nemoto's avatar Atsushi Nemoto Committed by Ralf Baechle

[MIPS] TXx9: Add some pci options

Add pci options for backplane type, clock selection, error handling,
timeout values.
Signed-off-by: default avatarAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 47a5c976
......@@ -194,6 +194,28 @@ static struct {
.gbwc = 0xfe0, /* 4064 GBUSCLK for CCFG.GTOT=0b11 */
};
char *__devinit tx4927_pcibios_setup(char *str)
{
unsigned long val;
if (!strncmp(str, "trdyto=", 7)) {
if (strict_strtoul(str + 7, 0, &val) == 0)
tx4927_pci_opts.trdyto = val;
return NULL;
}
if (!strncmp(str, "retryto=", 8)) {
if (strict_strtoul(str + 8, 0, &val) == 0)
tx4927_pci_opts.retryto = val;
return NULL;
}
if (!strncmp(str, "gbwc=", 5)) {
if (strict_strtoul(str + 5, 0, &val) == 0)
tx4927_pci_opts.gbwc = val;
return NULL;
}
return str;
}
void __init tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr,
struct pci_controller *channel, int extarb)
{
......
......@@ -386,3 +386,39 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
return txx9_board_vec->pci_map_irq(dev, slot, pin);
}
char * (*txx9_board_pcibios_setup)(char *str) __devinitdata;
char *__devinit txx9_pcibios_setup(char *str)
{
if (txx9_board_pcibios_setup && !txx9_board_pcibios_setup(str))
return NULL;
if (!strcmp(str, "picmg")) {
/* PICMG compliant backplane (TOSHIBA JMB-PICMG-ATX
(5V or 3.3V), JMB-PICMG-L2 (5V only), etc.) */
txx9_pci_option |= TXX9_PCI_OPT_PICMG;
return NULL;
} else if (!strcmp(str, "nopicmg")) {
/* non-PICMG compliant backplane (TOSHIBA
RBHBK4100,RBHBK4200, Interface PCM-PCM05, etc.) */
txx9_pci_option &= ~TXX9_PCI_OPT_PICMG;
return NULL;
} else if (!strncmp(str, "clk=", 4)) {
char *val = str + 4;
txx9_pci_option &= ~TXX9_PCI_OPT_CLK_MASK;
if (strcmp(val, "33") == 0)
txx9_pci_option |= TXX9_PCI_OPT_CLK_33;
else if (strcmp(val, "66") == 0)
txx9_pci_option |= TXX9_PCI_OPT_CLK_66;
else /* "auto" */
txx9_pci_option |= TXX9_PCI_OPT_CLK_AUTO;
return NULL;
} else if (!strncmp(str, "err=", 4)) {
if (!strcmp(str + 4, "panic"))
txx9_pci_err_action = TXX9_PCI_ERR_PANIC;
else if (!strcmp(str + 4, "ignore"))
txx9_pci_err_action = TXX9_PCI_ERR_IGNORE;
return NULL;
}
return str;
}
......@@ -23,6 +23,7 @@
#include <asm/bootinfo.h>
#include <asm/time.h>
#include <asm/txx9/generic.h>
#include <asm/txx9/pci.h>
#ifdef CONFIG_CPU_TX49XX
#include <asm/txx9/tx4938.h>
#endif
......@@ -194,6 +195,9 @@ void __init plat_mem_setup(void)
ioport_resource.end = ~0UL; /* no limit */
iomem_resource.start = 0;
iomem_resource.end = ~0UL; /* no limit */
#ifdef CONFIG_PCI
pcibios_plat_setup = txx9_pcibios_setup;
#endif
txx9_board_vec->mem_setup();
}
......
......@@ -238,6 +238,7 @@ static void __init rbtx4927_mem_setup(void)
txx9_alloc_pci_controller(&txx9_primary_pcic,
RBTX4927_PCIMEM, RBTX4927_PCIMEM_SIZE,
RBTX4927_PCIIO, RBTX4927_PCIIO_SIZE);
txx9_board_pcibios_setup = tx4927_pcibios_setup;
#else
set_io_port_base(KSEG1 + RBTX4927_ISA_IO_OFFSET);
#endif
......
......@@ -193,6 +193,7 @@ static void __init rbtx4938_mem_setup(void)
#ifdef CONFIG_PCI
txx9_alloc_pci_controller(&txx9_primary_pcic, 0, 0, 0, 0);
txx9_board_pcibios_setup = tx4927_pcibios_setup;
#else
set_io_port_base(RBTX4938_ETHER_BASE);
#endif
......
......@@ -33,4 +33,7 @@ enum txx9_pci_err_action {
};
extern enum txx9_pci_err_action txx9_pci_err_action;
extern char * (*txx9_board_pcibios_setup)(char *str);
char *txx9_pcibios_setup(char *str);
#endif /* __ASM_TXX9_PCI_H */
......@@ -195,5 +195,6 @@ struct tx4927_pcic_reg __iomem *get_tx4927_pcicptr(
void __init tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr,
struct pci_controller *channel, int extarb);
void tx4927_report_pcic_status(void);
char *tx4927_pcibios_setup(char *str);
#endif /* __ASM_TXX9_TX4927PCIC_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment