Commit 076f2cc4 authored by Russell King's avatar Russell King

ARM: pm: omap34xx: convert to generic suspend/resume support

Convert omap34xx to use the generic CPU suspend/resume support, rather
than implementing its own version.  Tested on 3430 LDP.
Reviewed-by: default avatarKevin Hilman <khilman@ti.com>
Tested-by: default avatarKevin Hilman <khilman@ti.com>
Acked-by: default avatarJean Pihet <j-pihet@ti.com>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 2637ce30
......@@ -40,8 +40,6 @@
#include <plat/gpmc.h>
#include <plat/dma.h>
#include <asm/tlbflush.h>
#include "cm2xxx_3xxx.h"
#include "cm-regbits-34xx.h"
#include "prm-regbits-34xx.h"
......@@ -64,11 +62,6 @@ static inline bool is_suspending(void)
}
#endif
/* Scratchpad offsets */
#define OMAP343X_TABLE_ADDRESS_OFFSET 0xc4
#define OMAP343X_TABLE_VALUE_OFFSET 0xc0
#define OMAP343X_CONTROL_REG_VALUE_OFFSET 0xc8
/* pm34xx errata defined in pm.h */
u16 pm34xx_errata;
......@@ -312,28 +305,9 @@ static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
return IRQ_HANDLED;
}
/* Function to restore the table entry that was modified for enabling MMU */
static void restore_table_entry(void)
static void omap34xx_do_sram_idle(unsigned long save_state)
{
void __iomem *scratchpad_address;
u32 previous_value, control_reg_value;
u32 *address;
scratchpad_address = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD);
/* Get address of entry that was modified */
address = (u32 *)__raw_readl(scratchpad_address +
OMAP343X_TABLE_ADDRESS_OFFSET);
/* Get the previous value which needs to be restored */
previous_value = __raw_readl(scratchpad_address +
OMAP343X_TABLE_VALUE_OFFSET);
address = __va(address);
*address = previous_value;
flush_tlb_all();
control_reg_value = __raw_readl(scratchpad_address
+ OMAP343X_CONTROL_REG_VALUE_OFFSET);
/* This will enable caches and prediction */
set_cr(control_reg_value);
_omap_sram_idle(omap3_arm_context, save_state);
}
void omap_sram_idle(void)
......@@ -432,12 +406,15 @@ void omap_sram_idle(void)
sdrc_pwr = sdrc_read_reg(SDRC_POWER);
/*
* omap3_arm_context is the location where ARM registers
* get saved. The restore path then reads from this
* location and restores them back.
* omap3_arm_context is the location where some ARM context
* get saved. The rest is placed on the stack, and restored
* from there before resuming.
*/
_omap_sram_idle(omap3_arm_context, save_state);
cpu_init();
if (save_state == 1 || save_state == 3)
cpu_suspend(0, PHYS_OFFSET - PAGE_OFFSET, save_state,
omap34xx_do_sram_idle);
else
omap34xx_do_sram_idle(save_state);
/* Restore normal SDRC POWER settings */
if (omap_rev() >= OMAP3430_REV_ES3_0 &&
......@@ -445,10 +422,6 @@ void omap_sram_idle(void)
core_next_state == PWRDM_POWER_OFF)
sdrc_write_reg(sdrc_pwr, SDRC_POWER);
/* Restore table entry modified during MMU restoration */
if (pwrdm_read_prev_pwrst(mpu_pwrdm) == PWRDM_POWER_OFF)
restore_table_entry();
/* CORE */
if (core_next_state < PWRDM_POWER_ON) {
core_prev_state = pwrdm_read_prev_pwrst(core_pwrdm);
......
......@@ -211,37 +211,6 @@ save_context_wfi:
mrc p15, 1, r5, c9, c0, 2 @ Read L2 AUX ctrl register
stmia r8!, {r4-r5} @ Push parameters for restore call
/* Check what that target sleep state is from r1 */
cmp r1, #0x2 @ Only L2 lost, no need to save context
beq clean_caches
l1_logic_lost:
mov r4, sp @ Store sp
mrs r5, spsr @ Store spsr
mov r6, lr @ Store lr
stmia r8!, {r4-r6}
mrc p15, 0, r4, c1, c0, 2 @ Coprocessor access control register
mrc p15, 0, r5, c2, c0, 0 @ TTBR0
mrc p15, 0, r6, c2, c0, 1 @ TTBR1
mrc p15, 0, r7, c2, c0, 2 @ TTBCR
stmia r8!, {r4-r7}
mrc p15, 0, r4, c3, c0, 0 @ Domain access Control Register
mrc p15, 0, r5, c10, c2, 0 @ PRRR
mrc p15, 0, r6, c10, c2, 1 @ NMRR
stmia r8!,{r4-r6}
mrc p15, 0, r4, c13, c0, 1 @ Context ID
mrc p15, 0, r5, c13, c0, 2 @ User r/w thread and process ID
mrc p15, 0, r6, c12, c0, 0 @ Secure or NS vector base address
mrs r7, cpsr @ Store current cpsr
stmia r8!, {r4-r7}
mrc p15, 0, r4, c1, c0, 0 @ save control register
stmia r8!, {r4}
clean_caches:
/*
* jump out to kernel flush routine
* - reuse that code is better
......@@ -466,109 +435,11 @@ logic_l1_restore:
orr r1, r1, #2 @ re-enable L2 cache
mcr p15, 0, r1, c1, c0, 1
skipl2reen:
mov r1, #0
/*
* Invalidate all instruction caches to PoU
* and flush branch target cache
*/
mcr p15, 0, r1, c7, c5, 0
ldr r4, scratchpad_base
ldr r3, [r4,#0xBC]
adds r3, r3, #16
ldmia r3!, {r4-r6}
mov sp, r4 @ Restore sp
msr spsr_cxsf, r5 @ Restore spsr
mov lr, r6 @ Restore lr
ldmia r3!, {r4-r7}
mcr p15, 0, r4, c1, c0, 2 @ Coprocessor access Control Register
mcr p15, 0, r5, c2, c0, 0 @ TTBR0
mcr p15, 0, r6, c2, c0, 1 @ TTBR1
mcr p15, 0, r7, c2, c0, 2 @ TTBCR
ldmia r3!,{r4-r6}
mcr p15, 0, r4, c3, c0, 0 @ Domain access Control Register
mcr p15, 0, r5, c10, c2, 0 @ PRRR
mcr p15, 0, r6, c10, c2, 1 @ NMRR
ldmia r3!,{r4-r7}
mcr p15, 0, r4, c13, c0, 1 @ Context ID
mcr p15, 0, r5, c13, c0, 2 @ User r/w thread and process ID
mrc p15, 0, r6, c12, c0, 0 @ Secure or NS vector base address
msr cpsr, r7 @ store cpsr
/* Enabling MMU here */
mrc p15, 0, r7, c2, c0, 2 @ Read TTBRControl
/* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1 */
and r7, #0x7
cmp r7, #0x0
beq usettbr0
ttbr_error:
/*
* More work needs to be done to support N[0:2] value other than 0
* So looping here so that the error can be detected
*/
b ttbr_error
usettbr0:
mrc p15, 0, r2, c2, c0, 0
ldr r5, ttbrbit_mask
and r2, r5
mov r4, pc
ldr r5, table_index_mask
and r4, r5 @ r4 = 31 to 20 bits of pc
/* Extract the value to be written to table entry */
ldr r1, table_entry
/* r1 has the value to be written to table entry*/
add r1, r1, r4
/* Getting the address of table entry to modify */
lsr r4, #18
/* r2 has the location which needs to be modified */
add r2, r4
/* Storing previous entry of location being modified */
ldr r5, scratchpad_base
ldr r4, [r2]
str r4, [r5, #0xC0]
/* Modify the table entry */
str r1, [r2]
/*
* Storing address of entry being modified
* - will be restored after enabling MMU
*/
ldr r5, scratchpad_base
str r2, [r5, #0xC4]
mov r0, #0
mcr p15, 0, r0, c7, c5, 4 @ Flush prefetch buffer
mcr p15, 0, r0, c7, c5, 6 @ Invalidate branch predictor array
mcr p15, 0, r0, c8, c5, 0 @ Invalidate instruction TLB
mcr p15, 0, r0, c8, c6, 0 @ Invalidate data TLB
/*
* Restore control register. This enables the MMU.
* The caches and prediction are not enabled here, they
* will be enabled after restoring the MMU table entry.
*/
ldmia r3!, {r4}
/* Store previous value of control register in scratchpad */
str r4, [r5, #0xC8]
ldr r2, cache_pred_disable_mask
and r4, r2
mcr p15, 0, r4, c1, c0, 0
dsb
isb
ldr r0, =restoremmu_on
bx r0
/*
* ==============================
* == Exit point from OFF mode ==
* ==============================
*/
restoremmu_on:
ldmfd sp!, {r4 - r11, pc} @ restore regs and return
/* Now branch to the common CPU resume function */
b cpu_resume
.ltorg
/*
* Internal functions
......@@ -719,14 +590,6 @@ sram_base:
.word SRAM_BASE_P + 0x8000
sdrc_power:
.word SDRC_POWER_V
ttbrbit_mask:
.word 0xFFFFC000
table_index_mask:
.word 0xFFF00000
table_entry:
.word 0x00000C02
cache_pred_disable_mask:
.word 0xFFFFE7FB
control_stat:
.word CONTROL_STAT
control_mem_rta:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment