ARM: Bring back ARMv3 IO and user access code

This partially reverts 357c9c1f
(ARM: Remove support for ARMv3 ARM610 and ARM710 CPUs).

Although we only support StrongARM on the RiscPC, we need to keep the
ARMv3 user access code for this platform because the bus does not
understand half-word load/stores.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/lib/Makefile

@@ -16,13 +16,30 @@ lib-y		:= backtrace.o changebit.o csumipv6.o csumpartial.o   \
 		   call_with_stack.o
 
 mmu-y	:= clear_user.o copy_page.o getuser.o putuser.o
-mmu-y	+= copy_from_user.o copy_to_user.o
+
+# the code in uaccess.S is not preemption safe and
+# probably faster on ARMv3 only
+ifeq ($(CONFIG_PREEMPT),y)
+  mmu-y	+= copy_from_user.o copy_to_user.o
+else
+ifneq ($(CONFIG_CPU_32v3),y)
+  mmu-y	+= copy_from_user.o copy_to_user.o
+else
+  mmu-y	+= uaccess.o
+endif
+endif
 
 # using lib_ here won't override already available weak symbols
 obj-$(CONFIG_UACCESS_WITH_MEMCPY) += uaccess_with_memcpy.o
 
-lib-$(CONFIG_MMU)		+= $(mmu-y)
-lib-y				+= io-readsw-armv4.o io-writesw-armv4.o
+lib-$(CONFIG_MMU) += $(mmu-y)
+
+ifeq ($(CONFIG_CPU_32v3),y)
+  lib-y	+= io-readsw-armv3.o io-writesw-armv3.o
+else
+  lib-y	+= io-readsw-armv4.o io-writesw-armv4.o
+endif
+
 lib-$(CONFIG_ARCH_RPC)		+= ecard.o io-acorn.o floppydma.o
 lib-$(CONFIG_ARCH_SHARK)	+= io-shark.o
 

arch/arm/lib/io-readsw-armv3.S

+/*
+ *  linux/arch/arm/lib/io-readsw-armv3.S
+ *
+ *  Copyright (C) 1995-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+.Linsw_bad_alignment:
+		adr	r0, .Linsw_bad_align_msg
+		mov	r2, lr
+		b	panic
+.Linsw_bad_align_msg:
+		.asciz	"insw: bad buffer alignment (0x%p, lr=0x%08lX)\n"
+		.align
+
+.Linsw_align:	tst	r1, #1
+		bne	.Linsw_bad_alignment
+
+		ldr	r3, [r0]
+		strb	r3, [r1], #1
+		mov	r3, r3, lsr #8
+		strb	r3, [r1], #1
+
+		subs	r2, r2, #1
+		moveq	pc, lr
+
+ENTRY(__raw_readsw)
+		teq	r2, #0		@ do we have to check for the zero len?
+		moveq	pc, lr
+		tst	r1, #3
+		bne	.Linsw_align
+
+.Linsw_aligned:	mov	ip, #0xff
+		orr	ip, ip, ip, lsl #8
+		stmfd	sp!, {r4, r5, r6, lr}
+
+		subs	r2, r2, #8
+		bmi	.Lno_insw_8
+
+.Linsw_8_lp:	ldr	r3, [r0]
+		and	r3, r3, ip
+		ldr	r4, [r0]
+		orr	r3, r3, r4, lsl #16
+
+		ldr	r4, [r0]
+		and	r4, r4, ip
+		ldr	r5, [r0]
+		orr	r4, r4, r5, lsl #16
+
+		ldr	r5, [r0]
+		and	r5, r5, ip
+		ldr	r6, [r0]
+		orr	r5, r5, r6, lsl #16
+
+		ldr	r6, [r0]
+		and	r6, r6, ip
+		ldr	lr, [r0]
+		orr	r6, r6, lr, lsl #16
+
+		stmia	r1!, {r3 - r6}
+
+		subs	r2, r2, #8
+		bpl	.Linsw_8_lp
+
+		tst	r2, #7
+		ldmeqfd	sp!, {r4, r5, r6, pc}
+
+.Lno_insw_8:	tst	r2, #4
+		beq	.Lno_insw_4
+
+		ldr	r3, [r0]
+		and	r3, r3, ip
+		ldr	r4, [r0]
+		orr	r3, r3, r4, lsl #16
+
+		ldr	r4, [r0]
+		and	r4, r4, ip
+		ldr	r5, [r0]
+		orr	r4, r4, r5, lsl #16
+
+		stmia	r1!, {r3, r4}
+
+.Lno_insw_4:	tst	r2, #2
+		beq	.Lno_insw_2
+
+		ldr	r3, [r0]
+		and	r3, r3, ip
+		ldr	r4, [r0]
+		orr	r3, r3, r4, lsl #16
+
+		str	r3, [r1], #4
+
+.Lno_insw_2:	tst	r2, #1
+		ldrne	r3, [r0]
+		strneb	r3, [r1], #1
+		movne	r3, r3, lsr #8
+		strneb	r3, [r1]
+
+		ldmfd	sp!, {r4, r5, r6, pc}
+
+

arch/arm/lib/io-writesw-armv3.S

+/*
+ *  linux/arch/arm/lib/io-writesw-armv3.S
+ *
+ *  Copyright (C) 1995-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+.Loutsw_bad_alignment:
+		adr	r0, .Loutsw_bad_align_msg
+		mov	r2, lr
+		b	panic
+.Loutsw_bad_align_msg:
+		.asciz	"outsw: bad buffer alignment (0x%p, lr=0x%08lX)\n"
+		.align
+
+.Loutsw_align:	tst	r1, #1
+		bne	.Loutsw_bad_alignment
+
+		add	r1, r1, #2
+
+		ldr	r3, [r1, #-4]
+		mov	r3, r3, lsr #16
+		orr	r3, r3, r3, lsl #16
+		str	r3, [r0]
+		subs	r2, r2, #1
+		moveq	pc, lr
+
+ENTRY(__raw_writesw)
+		teq	r2, #0		@ do we have to check for the zero len?
+		moveq	pc, lr
+		tst	r1, #3
+		bne	.Loutsw_align
+
+		stmfd	sp!, {r4, r5, r6, lr}
+
+		subs	r2, r2, #8
+		bmi	.Lno_outsw_8
+
+.Loutsw_8_lp:	ldmia	r1!, {r3, r4, r5, r6}
+
+		mov	ip, r3, lsl #16
+		orr	ip, ip, ip, lsr #16
+		str	ip, [r0]
+
+		mov	ip, r3, lsr #16
+		orr	ip, ip, ip, lsl #16
+		str	ip, [r0]
+
+		mov	ip, r4, lsl #16
+		orr	ip, ip, ip, lsr #16
+		str	ip, [r0]
+
+		mov	ip, r4, lsr #16
+		orr	ip, ip, ip, lsl #16
+		str	ip, [r0]
+
+		mov	ip, r5, lsl #16
+		orr	ip, ip, ip, lsr #16
+		str	ip, [r0]
+
+		mov	ip, r5, lsr #16
+		orr	ip, ip, ip, lsl #16
+		str	ip, [r0]
+
+		mov	ip, r6, lsl #16
+		orr	ip, ip, ip, lsr #16
+		str	ip, [r0]
+
+		mov	ip, r6, lsr #16
+		orr	ip, ip, ip, lsl #16
+		str	ip, [r0]
+
+		subs	r2, r2, #8
+		bpl	.Loutsw_8_lp
+
+		tst	r2, #7
+		ldmeqfd	sp!, {r4, r5, r6, pc}
+
+.Lno_outsw_8:	tst	r2, #4
+		beq	.Lno_outsw_4
+
+		ldmia	r1!, {r3, r4}
+
+		mov	ip, r3, lsl #16
+		orr	ip, ip, ip, lsr #16
+		str	ip, [r0]
+
+		mov	ip, r3, lsr #16
+		orr	ip, ip, ip, lsl #16
+		str	ip, [r0]
+
+		mov	ip, r4, lsl #16
+		orr	ip, ip, ip, lsr #16
+		str	ip, [r0]
+
+		mov	ip, r4, lsr #16
+		orr	ip, ip, ip, lsl #16
+		str	ip, [r0]
+
+.Lno_outsw_4:	tst	r2, #2
+		beq	.Lno_outsw_2
+
+		ldr	r3, [r1], #4
+
+		mov	ip, r3, lsl #16
+		orr	ip, ip, ip, lsr #16
+		str	ip, [r0]
+
+		mov	ip, r3, lsr #16
+		orr	ip, ip, ip, lsl #16
+		str	ip, [r0]
+
+.Lno_outsw_2:	tst	r2, #1
+
+		ldrne	r3, [r1]
+
+		movne	ip, r3, lsl #16
+		orrne	ip, ip, ip, lsr #16
+		strne	ip, [r0]
+
+		ldmfd	sp!, {r4, r5, r6, pc}