Merge branch 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (43 commits)
  Revert "USB: isp1760-hcd: move imask clear after pending work is done"
  xHCI: Implement AMD PLL quirk
  xhci: Tell USB core both roothubs lost power.
  usbcore: Bug fix: system can't suspend with USB3.0 device connected to USB3.0 hub
  USB: Fix unplug of device with active streams
  USB: xhci - also free streams when resetting devices
  xhci: Fix NULL pointer deref in handle_port_status()
  USB: xhci - fix math in xhci_get_endpoint_interval()
  USB: xhci: simplify logic of skipping missed isoc TDs
  USB: xhci - remove excessive 'inline' markings
  USB: xhci: unsigned char never equals -1
  USB: xhci - fix unsafe macro definitions
  USB: fix formatting of SuperSpeed endpoints in /proc/bus/usb/devices
  USB: isp1760-hcd: move imask clear after pending work is done
  USB: fsl_qe_udc: send ZLP when zero flag and length % maxpacket == 0
  usb: qcserial add missing errorpath kfrees
  usb: qcserial avoid pointing to freed memory
  usb: Fix qcserial memory leak on rmmod
  USB: ftdi_sio: add ids for Hameg HO720 and HO730
  USB: option: Added support for Samsung GT-B3730/GT-B3710 LTE USB modem.
  ...

arch/microblaze/Kconfig

@@ -6,7 +6,6 @@ config MICROBLAZE
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FTRACE_MCOUNT_RECORD
-	select USB_ARCH_HAS_EHCI
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select HAVE_OPROFILE
 	select HAVE_ARCH_KGDB

drivers/usb/Kconfig

@@ -66,6 +66,7 @@ config USB_ARCH_HAS_EHCI
 	default y if ARCH_VT8500
 	default y if PLAT_SPEAR
 	default y if ARCH_MSM
+	default y if MICROBLAZE
 	default PCI
 
 # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.

drivers/usb/core/devices.c

@@ -221,7 +221,7 @@ static char *usb_dump_endpoint_descriptor(int speed, char *start, char *end,
 		break;
 	case USB_ENDPOINT_XFER_INT:
 		type = "Int.";
-		if (speed == USB_SPEED_HIGH)
+		if (speed == USB_SPEED_HIGH || speed == USB_SPEED_SUPER)
 			interval = 1 << (desc->bInterval - 1);
 		else
 			interval = desc->bInterval;
@@ -229,7 +229,8 @@ static char *usb_dump_endpoint_descriptor(int speed, char *start, char *end,
 	default:	/* "can't happen" */
 		return start;
 	}
-	interval *= (speed == USB_SPEED_HIGH) ? 125 : 1000;
+	interval *= (speed == USB_SPEED_HIGH ||
+		     speed == USB_SPEED_SUPER) ? 125 : 1000;
 	if (interval % 1000)
 		unit = 'u';
 	else {
@@ -542,8 +543,9 @@ static ssize_t usb_device_dump(char __user **buffer, size_t *nbytes,
 	if (level == 0) {
 		int	max;
 
-		/* high speed reserves 80%, full/low reserves 90% */
-		if (usbdev->speed == USB_SPEED_HIGH)
+		/* super/high speed reserves 80%, full/low reserves 90% */
+		if (usbdev->speed == USB_SPEED_HIGH ||
+		    usbdev->speed == USB_SPEED_SUPER)
 			max = 800;
 		else
 			max = FRAME_TIME_MAX_USECS_ALLOC;

drivers/usb/core/hcd.c

@@ -1908,7 +1908,7 @@ void usb_free_streams(struct usb_interface *interface,
 
 	/* Streams only apply to bulk endpoints. */
 	for (i = 0; i < num_eps; i++)
-		if (!usb_endpoint_xfer_bulk(&eps[i]->desc))
+		if (!eps[i] || !usb_endpoint_xfer_bulk(&eps[i]->desc))
 			return;
 
 	hcd->driver->free_streams(hcd, dev, eps, num_eps, mem_flags);

drivers/usb/core/hub.c

@@ -2285,7 +2285,17 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
 	}
 
 	/* see 7.1.7.6 */
-	status = set_port_feature(hub->hdev, port1, USB_PORT_FEAT_SUSPEND);
+	/* Clear PORT_POWER if it's a USB3.0 device connected to USB 3.0
+	 * external hub.
+	 * FIXME: this is a temporary workaround to make the system able
+	 * to suspend/resume.
+	 */
+	if ((hub->hdev->parent != NULL) && hub_is_superspeed(hub->hdev))
+		status = clear_port_feature(hub->hdev, port1,
+						USB_PORT_FEAT_POWER);
+	else
+		status = set_port_feature(hub->hdev, port1,
+						USB_PORT_FEAT_SUSPEND);
 	if (status) {
 		dev_dbg(hub->intfdev, "can't suspend port %d, status %d\n",
 				port1, status);

drivers/usb/gadget/f_audio.c

@@ -706,6 +706,7 @@ f_audio_unbind(struct usb_configuration *c, struct usb_function *f)
 	struct f_audio		*audio = func_to_audio(f);
 
 	usb_free_descriptors(f->descriptors);
+	usb_free_descriptors(f->hs_descriptors);
 	kfree(audio);
 }
 

drivers/usb/gadget/f_eem.c

@@ -314,6 +314,9 @@ eem_unbind(struct usb_configuration *c, struct usb_function *f)
 
 static void eem_cmd_complete(struct usb_ep *ep, struct usb_request *req)
 {
+	struct sk_buff *skb = (struct sk_buff *)req->context;
+
+	dev_kfree_skb_any(skb);
 }
 
 /*
@@ -428,10 +431,11 @@ static int eem_unwrap(struct gether *port,
 				skb_trim(skb2, len);
 				put_unaligned_le16(BIT(15) | BIT(11) | len,
 							skb_push(skb2, 2));
-				skb_copy_bits(skb, 0, req->buf, skb->len);
-				req->length = skb->len;
+				skb_copy_bits(skb2, 0, req->buf, skb2->len);
+				req->length = skb2->len;
 				req->complete = eem_cmd_complete;
 				req->zero = 1;
+				req->context = skb2;
 				if (usb_ep_queue(port->in_ep, req, GFP_ATOMIC))
 					DBG(cdev, "echo response queue fail\n");
 				break;

drivers/usb/gadget/fsl_qe_udc.c

@@ -1148,6 +1148,12 @@ static int qe_ep_tx(struct qe_ep *ep, struct qe_frame *frame)
 static int txcomplete(struct qe_ep *ep, unsigned char restart)
 {
 	if (ep->tx_req != NULL) {
+		struct qe_req *req = ep->tx_req;
+		unsigned zlp = 0, last_len = 0;
+
+		last_len = min_t(unsigned, req->req.length - ep->sent,
+				ep->ep.maxpacket);
+
 		if (!restart) {
 			int asent = ep->last;
 			ep->sent += asent;
@@ -1156,9 +1162,18 @@ static int txcomplete(struct qe_ep *ep, unsigned char restart)
 			ep->last = 0;
 		}
 
+		/* zlp needed when req->re.zero is set */
+		if (req->req.zero) {
+			if (last_len == 0 ||
+				(req->req.length % ep->ep.maxpacket) != 0)
+				zlp = 0;
+			else
+				zlp = 1;
+		} else
+			zlp = 0;
+
 		/* a request already were transmitted completely */
-		if ((ep->tx_req->req.length - ep->sent) <= 0) {
-			ep->tx_req->req.actual = (unsigned int)ep->sent;
+		if (((ep->tx_req->req.length - ep->sent) <= 0) && !zlp) {
 			done(ep, ep->tx_req, 0);
 			ep->tx_req = NULL;
 			ep->last = 0;
@@ -1191,6 +1206,7 @@ static int qe_usb_senddata(struct qe_ep *ep, struct qe_frame *frame)
 	buf = (u8 *)ep->tx_req->req.buf + ep->sent;
 	if (buf && size) {
 		ep->last = size;
+		ep->tx_req->req.actual += size;
 		frame_set_data(frame, buf);
 		frame_set_length(frame, size);
 		frame_set_status(frame, FRAME_OK);

drivers/usb/gadget/inode.c

@@ -386,8 +386,10 @@ ep_read (struct file *fd, char __user *buf, size_t len, loff_t *ptr)
 
 	/* halt any endpoint by doing a "wrong direction" i/o call */
 	if (usb_endpoint_dir_in(&data->desc)) {
-		if (usb_endpoint_xfer_isoc(&data->desc))
+		if (usb_endpoint_xfer_isoc(&data->desc)) {
+			mutex_unlock(&data->lock);
 			return -EINVAL;
+		}
 		DBG (data->dev, "%s halt\n", data->name);
 		spin_lock_irq (&data->dev->lock);
 		if (likely (data->ep != NULL))

drivers/usb/gadget/pch_udc.c

@@ -1608,7 +1608,7 @@ static int pch_udc_pcd_queue(struct usb_ep *usbep, struct usb_request *usbreq,
 		return -EINVAL;
 	if (!dev->driver || (dev->gadget.speed == USB_SPEED_UNKNOWN))
 		return -ESHUTDOWN;
-	spin_lock_irqsave(&ep->dev->lock, iflags);
+	spin_lock_irqsave(&dev->lock, iflags);
 	/* map the buffer for dma */
 	if (usbreq->length &&
 	    ((usbreq->dma == DMA_ADDR_INVALID) || !usbreq->dma)) {
@@ -1625,8 +1625,10 @@ static int pch_udc_pcd_queue(struct usb_ep *usbep, struct usb_request *usbreq,
 							     DMA_FROM_DEVICE);
 		} else {
 			req->buf = kzalloc(usbreq->length, GFP_ATOMIC);
-			if (!req->buf)
-				return -ENOMEM;
+			if (!req->buf) {
+				retval = -ENOMEM;
+				goto probe_end;
+			}
 			if (ep->in) {
 				memcpy(req->buf, usbreq->buf, usbreq->length);
 				req->dma = dma_map_single(&dev->pdev->dev,

drivers/usb/gadget/r8a66597-udc.c

@@ -1083,7 +1083,9 @@ static void irq_device_state(struct r8a66597 *r8a66597)
 
 	if (dvsq == DS_DFLT) {
 		/* bus reset */
+		spin_unlock(&r8a66597->lock);
 		r8a66597->driver->disconnect(&r8a66597->gadget);
+		spin_lock(&r8a66597->lock);
 		r8a66597_update_usb_speed(r8a66597);
 	}
 	if (r8a66597->old_dvsq == DS_CNFG && dvsq != DS_CNFG)

drivers/usb/host/ehci-q.c

@@ -1247,24 +1247,27 @@ static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
 
 static void scan_async (struct ehci_hcd *ehci)
 {
+	bool			stopped;
 	struct ehci_qh		*qh;
 	enum ehci_timer_action	action = TIMER_IO_WATCHDOG;
 
 	ehci->stamp = ehci_readl(ehci, &ehci->regs->frame_index);
 	timer_action_done (ehci, TIMER_ASYNC_SHRINK);
 rescan:
+	stopped = !HC_IS_RUNNING(ehci_to_hcd(ehci)->state);
 	qh = ehci->async->qh_next.qh;
 	if (likely (qh != NULL)) {
 		do {
 			/* clean any finished work for this qh */
-			if (!list_empty (&qh->qtd_list)
-					&& qh->stamp != ehci->stamp) {
+			if (!list_empty(&qh->qtd_list) && (stopped ||
+					qh->stamp != ehci->stamp)) {
 				int temp;
 
 				/* unlinks could happen here; completion
 				 * reporting drops the lock.  rescan using
 				 * the latest schedule, but don't rescan
-				 * qhs we already finished (no looping).
+				 * qhs we already finished (no looping)
+				 * unless the controller is stopped.
 				 */
 				qh = qh_get (qh);
 				qh->stamp = ehci->stamp;
@@ -1285,9 +1288,9 @@ static void scan_async (struct ehci_hcd *ehci)
 			 */
 			if (list_empty(&qh->qtd_list)
 					&& qh->qh_state == QH_STATE_LINKED) {
-				if (!ehci->reclaim
-					&& ((ehci->stamp - qh->stamp) & 0x1fff)
-						>= (EHCI_SHRINK_FRAMES * 8))
+				if (!ehci->reclaim && (stopped ||
+					((ehci->stamp - qh->stamp) & 0x1fff)
+						>= EHCI_SHRINK_FRAMES * 8))
 					start_unlink_async(ehci, qh);
 				else
 					action = TIMER_ASYNC_SHRINK;

drivers/usb/host/isp1760-hcd.c

@@ -295,7 +295,7 @@ static void alloc_mem(struct usb_hcd *hcd, struct isp1760_qtd *qtd)
 	}
 
 	dev_err(hcd->self.controller,
-				"%s: Can not allocate %lu bytes of memory\n"
+				"%s: Cannot allocate %zu bytes of memory\n"
 				"Current memory map:\n",
 				__func__, qtd->length);
 	for (i = 0; i < BLOCKS; i++) {

drivers/usb/host/ohci-au1xxx.c

@@ -33,7 +33,7 @@
 
 #ifdef __LITTLE_ENDIAN
 #define USBH_ENABLE_INIT (USBH_ENABLE_CE | USBH_ENABLE_E | USBH_ENABLE_C)
-#elif __BIG_ENDIAN
+#elif defined(__BIG_ENDIAN)
 #define USBH_ENABLE_INIT (USBH_ENABLE_CE | USBH_ENABLE_E | USBH_ENABLE_C | \
 			  USBH_ENABLE_BE)
 #else

drivers/usb/host/pci-quirks.c

@@ -84,65 +84,92 @@ int usb_amd_find_chipset_info(void)
 {
 	u8 rev = 0;
 	unsigned long flags;
+	struct amd_chipset_info info;
+	int ret;
 
 	spin_lock_irqsave(&amd_lock, flags);
 
-	amd_chipset.probe_count++;
 	/* probe only once */
-	if (amd_chipset.probe_count > 1) {
+	if (amd_chipset.probe_count > 0) {
+		amd_chipset.probe_count++;
 		spin_unlock_irqrestore(&amd_lock, flags);
 		return amd_chipset.probe_result;
 	}
+	memset(&info, 0, sizeof(info));
+	spin_unlock_irqrestore(&amd_lock, flags);
 
-	amd_chipset.smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI, 0x4385, NULL);
-	if (amd_chipset.smbus_dev) {
-		rev = amd_chipset.smbus_dev->revision;
+	info.smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI, 0x4385, NULL);
+	if (info.smbus_dev) {
+		rev = info.smbus_dev->revision;
 		if (rev >= 0x40)
-			amd_chipset.sb_type = 1;
+			info.sb_type = 1;
 		else if (rev >= 0x30 && rev <= 0x3b)
-			amd_chipset.sb_type = 3;
+			info.sb_type = 3;
 	} else {
-		amd_chipset.smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD,
-							0x780b, NULL);
-		if (!amd_chipset.smbus_dev) {
-			spin_unlock_irqrestore(&amd_lock, flags);
-			return 0;
+		info.smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD,
+						0x780b, NULL);
+		if (!info.smbus_dev) {
+			ret = 0;
+			goto commit;
 		}
-		rev = amd_chipset.smbus_dev->revision;
+
+		rev = info.smbus_dev->revision;
 		if (rev >= 0x11 && rev <= 0x18)
-			amd_chipset.sb_type = 2;
+			info.sb_type = 2;
 	}
 
-	if (amd_chipset.sb_type == 0) {
-		if (amd_chipset.smbus_dev) {
-			pci_dev_put(amd_chipset.smbus_dev);
-			amd_chipset.smbus_dev = NULL;
+	if (info.sb_type == 0) {
+		if (info.smbus_dev) {
+			pci_dev_put(info.smbus_dev);
+			info.smbus_dev = NULL;
 		}
-		spin_unlock_irqrestore(&amd_lock, flags);
-		return 0;
+		ret = 0;
+		goto commit;
 	}
 
-	amd_chipset.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x9601, NULL);
-	if (amd_chipset.nb_dev) {
-		amd_chipset.nb_type = 1;
+	info.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x9601, NULL);
+	if (info.nb_dev) {
+		info.nb_type = 1;
 	} else {
-		amd_chipset.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD,
-							0x1510, NULL);
-		if (amd_chipset.nb_dev) {
-			amd_chipset.nb_type = 2;
-		} else  {
-			amd_chipset.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD,
-								0x9600, NULL);
-			if (amd_chipset.nb_dev)
-				amd_chipset.nb_type = 3;
+		info.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x1510, NULL);
+		if (info.nb_dev) {
+			info.nb_type = 2;
+		} else {
+			info.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD,
+						     0x9600, NULL);
+			if (info.nb_dev)
+				info.nb_type = 3;
 		}
 	}
 
-	amd_chipset.probe_result = 1;
+	ret = info.probe_result = 1;
 	printk(KERN_DEBUG "QUIRK: Enable AMD PLL fix\n");
 
-	spin_unlock_irqrestore(&amd_lock, flags);
-	return amd_chipset.probe_result;
+commit:
+
+	spin_lock_irqsave(&amd_lock, flags);
+	if (amd_chipset.probe_count > 0) {
+		/* race - someone else was faster - drop devices */
+
+		/* Mark that we where here */
+		amd_chipset.probe_count++;
+		ret = amd_chipset.probe_result;
+
+		spin_unlock_irqrestore(&amd_lock, flags);
+
+		if (info.nb_dev)
+			pci_dev_put(info.nb_dev);
+		if (info.smbus_dev)
+			pci_dev_put(info.smbus_dev);
+
+	} else {
+		/* no race - commit the result */
+		info.probe_count++;
+		amd_chipset = info;
+		spin_unlock_irqrestore(&amd_lock, flags);
+	}
+
+	return ret;
 }
 EXPORT_SYMBOL_GPL(usb_amd_find_chipset_info);
 
@@ -284,6 +311,7 @@ EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_enable);
 
 void usb_amd_dev_put(void)
 {
+	struct pci_dev *nb, *smbus;
 	unsigned long flags;
 
 	spin_lock_irqsave(&amd_lock, flags);
@@ -294,20 +322,23 @@ void usb_amd_dev_put(void)
 		return;
 	}
 
-	if (amd_chipset.nb_dev) {
-		pci_dev_put(amd_chipset.nb_dev);
-		amd_chipset.nb_dev = NULL;
-	}
-	if (amd_chipset.smbus_dev) {
-		pci_dev_put(amd_chipset.smbus_dev);
-		amd_chipset.smbus_dev = NULL;
-	}
+	/* save them to pci_dev_put outside of spinlock */
+	nb    = amd_chipset.nb_dev;
+	smbus = amd_chipset.smbus_dev;
+
+	amd_chipset.nb_dev = NULL;
+	amd_chipset.smbus_dev = NULL;
 	amd_chipset.nb_type = 0;
 	amd_chipset.sb_type = 0;
 	amd_chipset.isoc_reqs = 0;
 	amd_chipset.probe_result = 0;
 
 	spin_unlock_irqrestore(&amd_lock, flags);
+
+	if (nb)
+		pci_dev_put(nb);
+	if (smbus)
+		pci_dev_put(smbus);
 }
 EXPORT_SYMBOL_GPL(usb_amd_dev_put);
 

drivers/usb/host/xhci-mem.c

@@ -846,7 +846,7 @@ static u32 xhci_find_real_port_number(struct xhci_hcd *xhci,
 		 * Skip ports that don't have known speeds, or have duplicate
 		 * Extended Capabilities port speed entries.
 		 */
-		if (port_speed == 0 || port_speed == -1)
+		if (port_speed == 0 || port_speed == DUPLICATE_ENTRY)
 			continue;
 
 		/*
@@ -974,6 +974,47 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 	return 0;
 }
 
+/*
+ * Convert interval expressed as 2^(bInterval - 1) == interval into
+ * straight exponent value 2^n == interval.
+ *
+ */
+static unsigned int xhci_parse_exponent_interval(struct usb_device *udev,
+		struct usb_host_endpoint *ep)
+{
+	unsigned int interval;
+
+	interval = clamp_val(ep->desc.bInterval, 1, 16) - 1;
+	if (interval != ep->desc.bInterval - 1)
+		dev_warn(&udev->dev,
+			 "ep %#x - rounding interval to %d microframes\n",
+			 ep->desc.bEndpointAddress,
+			 1 << interval);
+
+	return interval;
+}
+
+/*
+ * Convert bInterval expressed in frames (in 1-255 range) to exponent of
+ * microframes, rounded down to nearest power of 2.
+ */
+static unsigned int xhci_parse_frame_interval(struct usb_device *udev,
+		struct usb_host_endpoint *ep)
+{
+	unsigned int interval;
+
+	interval = fls(8 * ep->desc.bInterval) - 1;
+	interval = clamp_val(interval, 3, 10);
+	if ((1 << interval) != 8 * ep->desc.bInterval)
+		dev_warn(&udev->dev,
+			 "ep %#x - rounding interval to %d microframes, ep desc says %d microframes\n",
+			 ep->desc.bEndpointAddress,
+			 1 << interval,
+			 8 * ep->desc.bInterval);
+
+	return interval;
+}
+
 /* Return the polling or NAK interval.
  *
  * The polling interval is expressed in "microframes".  If xHCI's Interval field
@@ -982,7 +1023,7 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
  * The NAK interval is one NAK per 1 to 255 microframes, or no NAKs if interval
  * is set to 0.
  */
-static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
+static unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
 		struct usb_host_endpoint *ep)
 {
 	unsigned int interval = 0;
@@ -991,45 +1032,38 @@ static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
 	case USB_SPEED_HIGH:
 		/* Max NAK rate */
 		if (usb_endpoint_xfer_control(&ep->desc) ||
-				usb_endpoint_xfer_bulk(&ep->desc))
+		    usb_endpoint_xfer_bulk(&ep->desc)) {
 			interval = ep->desc.bInterval;
+			break;
+		}
 		/* Fall through - SS and HS isoc/int have same decoding */
+
 	case USB_SPEED_SUPER:
 		if (usb_endpoint_xfer_int(&ep->desc) ||
-				usb_endpoint_xfer_isoc(&ep->desc)) {
-			if (ep->desc.bInterval == 0)
-				interval = 0;
-			else
-				interval = ep->desc.bInterval - 1;
-			if (interval > 15)
-				interval = 15;
-			if (interval != ep->desc.bInterval + 1)
-				dev_warn(&udev->dev, "ep %#x - rounding interval to %d microframes\n",
-						ep->desc.bEndpointAddress, 1 << interval);
+		    usb_endpoint_xfer_isoc(&ep->desc)) {
+			interval = xhci_parse_exponent_interval(udev, ep);
 		}
 		break;
-	/* Convert bInterval (in 1-255 frames) to microframes and round down to
-	 * nearest power of 2.
-	 */
+
 	case USB_SPEED_FULL:
+		if (usb_endpoint_xfer_int(&ep->desc)) {
+			interval = xhci_parse_exponent_interval(udev, ep);
+			break;
+		}
+		/*
+		 * Fall through for isochronous endpoint interval decoding
+		 * since it uses the same rules as low speed interrupt
+		 * endpoints.
+		 */
+
 	case USB_SPEED_LOW:
 		if (usb_endpoint_xfer_int(&ep->desc) ||
-				usb_endpoint_xfer_isoc(&ep->desc)) {
-			interval = fls(8*ep->desc.bInterval) - 1;
-			if (interval > 10)
-				interval = 10;
-			if (interval < 3)
-				interval = 3;
-			if ((1 << interval) != 8*ep->desc.bInterval)
-				dev_warn(&udev->dev,
-						"ep %#x - rounding interval"
-						" to %d microframes, "
-						"ep desc says %d microframes\n",
-						ep->desc.bEndpointAddress,
-						1 << interval,
-						8*ep->desc.bInterval);
+		    usb_endpoint_xfer_isoc(&ep->desc)) {
+
+			interval = xhci_parse_frame_interval(udev, ep);
 		}
 		break;
+
 	default:
 		BUG();
 	}
@@ -1041,7 +1075,7 @@ static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
  * transaction opportunities per microframe", but that goes in the Max Burst
  * endpoint context field.
  */
-static inline u32 xhci_get_endpoint_mult(struct usb_device *udev,
+static u32 xhci_get_endpoint_mult(struct usb_device *udev,
 		struct usb_host_endpoint *ep)
 {
 	if (udev->speed != USB_SPEED_SUPER ||
@@ -1050,7 +1084,7 @@ static inline u32 xhci_get_endpoint_mult(struct usb_device *udev,
 	return ep->ss_ep_comp.bmAttributes;
 }
 
-static inline u32 xhci_get_endpoint_type(struct usb_device *udev,
+static u32 xhci_get_endpoint_type(struct usb_device *udev,
 		struct usb_host_endpoint *ep)
 {
 	int in;
@@ -1084,7 +1118,7 @@ static inline u32 xhci_get_endpoint_type(struct usb_device *udev,
  * Basically, this is the maxpacket size, multiplied by the burst size
  * and mult size.
  */
-static inline u32 xhci_get_max_esit_payload(struct xhci_hcd *xhci,
+static u32 xhci_get_max_esit_payload(struct xhci_hcd *xhci,
 		struct usb_device *udev,
 		struct usb_host_endpoint *ep)
 {
@@ -1727,12 +1761,12 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
 			 * found a similar duplicate.
 			 */
 			if (xhci->port_array[i] != major_revision &&
-				xhci->port_array[i] != (u8) -1) {
+				xhci->port_array[i] != DUPLICATE_ENTRY) {
 				if (xhci->port_array[i] == 0x03)
 					xhci->num_usb3_ports--;
 				else
 					xhci->num_usb2_ports--;
-				xhci->port_array[i] = (u8) -1;
+				xhci->port_array[i] = DUPLICATE_ENTRY;
 			}
 			/* FIXME: Should we disable the port? */
 			continue;
@@ -1831,7 +1865,7 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
 		for (i = 0; i < num_ports; i++) {
 			if (xhci->port_array[i] == 0x03 ||
 					xhci->port_array[i] == 0 ||
-					xhci->port_array[i] == -1)
+					xhci->port_array[i] == DUPLICATE_ENTRY)
 				continue;
 
 			xhci->usb2_ports[port_index] =

drivers/usb/host/xhci-pci.c

@@ -114,6 +114,10 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
 	if (pdev->vendor == PCI_VENDOR_ID_NEC)
 		xhci->quirks |= XHCI_NEC_HOST;
 
+	/* AMD PLL quirk */
+	if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info())
+		xhci->quirks |= XHCI_AMD_PLL_FIX;
+
 	/* Make sure the HC is halted. */
 	retval = xhci_halt(xhci);
 	if (retval)

drivers/usb/host/xhci.c

@@ -550,6 +550,9 @@ void xhci_stop(struct usb_hcd *hcd)
 	del_timer_sync(&xhci->event_ring_timer);
 #endif
 
+	if (xhci->quirks & XHCI_AMD_PLL_FIX)
+		usb_amd_dev_put();
+
 	xhci_dbg(xhci, "// Disabling event ring interrupts\n");
 	temp = xhci_readl(xhci, &xhci->op_regs->status);
 	xhci_writel(xhci, temp & ~STS_EINT, &xhci->op_regs->status);
@@ -771,7 +774,9 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 
 	/* If restore operation fails, re-initialize the HC during resume */
 	if ((temp & STS_SRE) || hibernated) {
-		usb_root_hub_lost_power(hcd->self.root_hub);
+		/* Let the USB core know _both_ roothubs lost power. */
+		usb_root_hub_lost_power(xhci->main_hcd->self.root_hub);
+		usb_root_hub_lost_power(xhci->shared_hcd->self.root_hub);
 
 		xhci_dbg(xhci, "Stop HCD\n");
 		xhci_halt(xhci);
@@ -2386,10 +2391,18 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
 	/* Everything but endpoint 0 is disabled, so free or cache the rings. */
 	last_freed_endpoint = 1;
 	for (i = 1; i < 31; ++i) {
-		if (!virt_dev->eps[i].ring)
-			continue;
-		xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i);
-		last_freed_endpoint = i;
+		struct xhci_virt_ep *ep = &virt_dev->eps[i];
+
+		if (ep->ep_state & EP_HAS_STREAMS) {
+			xhci_free_stream_info(xhci, ep->stream_info);
+			ep->stream_info = NULL;
+			ep->ep_state &= ~EP_HAS_STREAMS;
+		}
+
+		if (ep->ring) {
+			xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i);
+			last_freed_endpoint = i;
+		}
 	}
 	xhci_dbg(xhci, "Output context after successful reset device cmd:\n");
 	xhci_dbg_ctx(xhci, virt_dev->out_ctx, last_freed_endpoint);

drivers/usb/host/xhci.h

@@ -30,6 +30,7 @@
 
 /* Code sharing between pci-quirks and xhci hcd */
 #include	"xhci-ext-caps.h"
+#include "pci-quirks.h"
 
 /* xHCI PCI Configuration Registers */
 #define XHCI_SBRN_OFFSET	(0x60)
@@ -232,7 +233,7 @@ struct xhci_op_regs {
  * notification type that matches a bit set in this bit field.
  */
 #define	DEV_NOTE_MASK		(0xffff)
-#define ENABLE_DEV_NOTE(x)	(1 << x)
+#define ENABLE_DEV_NOTE(x)	(1 << (x))
 /* Most of the device notification types should only be used for debug.
  * SW does need to pay attention to function wake notifications.
  */
@@ -348,6 +349,9 @@ struct xhci_op_regs {
 /* Initiate a warm port reset - complete when PORT_WRC is '1' */
 #define PORT_WR		(1 << 31)
 
+/* We mark duplicate entries with -1 */
+#define DUPLICATE_ENTRY ((u8)(-1))
+
 /* Port Power Management Status and Control - port_power_base bitmasks */
 /* Inactivity timer value for transitions into U1, in microseconds.
  * Timeout can be up to 127us.  0xFF means an infinite timeout.
@@ -601,11 +605,11 @@ struct xhci_ep_ctx {
 #define EP_STATE_STOPPED	3
 #define EP_STATE_ERROR		4
 /* Mult - Max number of burtst within an interval, in EP companion desc. */
-#define EP_MULT(p)		((p & 0x3) << 8)
+#define EP_MULT(p)		(((p) & 0x3) << 8)
 /* bits 10:14 are Max Primary Streams */
 /* bit 15 is Linear Stream Array */
 /* Interval - period between requests to an endpoint - 125u increments. */
-#define EP_INTERVAL(p)		((p & 0xff) << 16)
+#define EP_INTERVAL(p)		(((p) & 0xff) << 16)
 #define EP_INTERVAL_TO_UFRAMES(p)		(1 << (((p) >> 16) & 0xff))
 #define EP_MAXPSTREAMS_MASK	(0x1f << 10)
 #define EP_MAXPSTREAMS(p)	(((p) << 10) & EP_MAXPSTREAMS_MASK)
@@ -1276,6 +1280,7 @@ struct xhci_hcd {
 #define	XHCI_LINK_TRB_QUIRK	(1 << 0)
 #define XHCI_RESET_EP_QUIRK	(1 << 1)
 #define XHCI_NEC_HOST		(1 << 2)
+#define XHCI_AMD_PLL_FIX	(1 << 3)
 	/* There are two roothubs to keep track of bus suspend info for */
 	struct xhci_bus_state   bus_state[2];
 	/* Is each xHCI roothub port a USB 3.0, USB 2.0, or USB 1.1 port? */

drivers/usb/musb/Kconfig

@@ -14,7 +14,7 @@ config USB_MUSB_HDRC
 	select TWL4030_USB if MACH_OMAP_3430SDP
 	select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA
 	select USB_OTG_UTILS
-	tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
+	bool 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
 	help
 	  Say Y here if your system has a dual role high speed USB
 	  controller based on the Mentor Graphics silicon IP.  Then
@@ -30,8 +30,8 @@ config USB_MUSB_HDRC
 
 	  If you do not know what this is, please say N.
 
-	  To compile this driver as a module, choose M here; the
-	  module will be called "musb-hdrc".
+#	  To compile this driver as a module, choose M here; the
+#	  module will be called "musb-hdrc".
 
 choice
 	prompt "Platform Glue Layer"

drivers/usb/musb/blackfin.c

@@ -21,6 +21,7 @@
 #include <asm/cacheflush.h>
 
 #include "musb_core.h"
+#include "musbhsdma.h"
 #include "blackfin.h"
 
 struct bfin_glue {
@@ -332,6 +333,27 @@ static int bfin_musb_set_mode(struct musb *musb, u8 musb_mode)
 	return -EIO;
 }
 
+static int bfin_musb_adjust_channel_params(struct dma_channel *channel,
+				u16 packet_sz, u8 *mode,
+				dma_addr_t *dma_addr, u32 *len)
+{
+	struct musb_dma_channel *musb_channel = channel->private_data;
+
+	/*
+	 * Anomaly 05000450 might cause data corruption when using DMA
+	 * MODE 1 transmits with short packet.  So to work around this,
+	 * we truncate all MODE 1 transfers down to a multiple of the
+	 * max packet size, and then do the last short packet transfer
+	 * (if there is any) using MODE 0.
+	 */
+	if (ANOMALY_05000450) {
+		if (musb_channel->transmit && *mode == 1)
+			*len = *len - (*len % packet_sz);
+	}
+
+	return 0;
+}
+
 static void bfin_musb_reg_init(struct musb *musb)
 {
 	if (ANOMALY_05000346) {
@@ -430,6 +452,8 @@ static const struct musb_platform_ops bfin_ops = {
 
 	.vbus_status	= bfin_musb_vbus_status,
 	.set_vbus	= bfin_musb_set_vbus,
+
+	.adjust_channel_params = bfin_musb_adjust_channel_params,
 };
 
 static u64 bfin_dmamask = DMA_BIT_MASK(32);

drivers/usb/musb/cppi_dma.c

@@ -597,12 +597,12 @@ cppi_next_tx_segment(struct musb *musb, struct cppi_channel *tx)
 		length = min(n_bds * maxpacket, length);
 	}
 
-	DBG(4, "TX DMA%d, pktSz %d %s bds %d dma 0x%x len %u\n",
+	DBG(4, "TX DMA%d, pktSz %d %s bds %d dma 0x%llx len %u\n",
 			tx->index,
 			maxpacket,
 			rndis ? "rndis" : "transparent",
 			n_bds,
-			addr, length);
+			(unsigned long long)addr, length);
 
 	cppi_rndis_update(tx, 0, musb->ctrl_base, rndis);
 
@@ -820,7 +820,7 @@ cppi_next_rx_segment(struct musb *musb, struct cppi_channel *rx, int onepacket)
 	length = min(n_bds * maxpacket, length);
 
 	DBG(4, "RX DMA%d seg, maxp %d %s bds %d (cnt %d) "
-			"dma 0x%x len %u %u/%u\n",
+			"dma 0x%llx len %u %u/%u\n",
 			rx->index, maxpacket,
 			onepacket
 				? (is_rndis ? "rndis" : "onepacket")
@@ -829,7 +829,8 @@ cppi_next_rx_segment(struct musb *musb, struct cppi_channel *rx, int onepacket)
 			musb_readl(tibase,
 				DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4))
 					& 0xffff,
-			addr, length, rx->channel.actual_len, rx->buf_len);
+			(unsigned long long)addr, length,
+			rx->channel.actual_len, rx->buf_len);
 
 	/* only queue one segment at a time, since the hardware prevents
 	 * correct queue shutdown after unexpected short packets
@@ -1039,9 +1040,9 @@ static bool cppi_rx_scan(struct cppi *cppi, unsigned ch)
 		if (!completed && (bd->hw_options & CPPI_OWN_SET))
 			break;
 
-		DBG(5, "C/RXBD %08x: nxt %08x buf %08x "
+		DBG(5, "C/RXBD %llx: nxt %08x buf %08x "
 			"off.len %08x opt.len %08x (%d)\n",
-			bd->dma, bd->hw_next, bd->hw_bufp,
+			(unsigned long long)bd->dma, bd->hw_next, bd->hw_bufp,
 			bd->hw_off_len, bd->hw_options,
 			rx->channel.actual_len);
 
@@ -1111,11 +1112,12 @@ static bool cppi_rx_scan(struct cppi *cppi, unsigned ch)
 		musb_ep_select(cppi->mregs, rx->index + 1);
 		csr = musb_readw(regs, MUSB_RXCSR);
 		if (csr & MUSB_RXCSR_DMAENAB) {
-			DBG(4, "list%d %p/%p, last %08x%s, csr %04x\n",
+			DBG(4, "list%d %p/%p, last %llx%s, csr %04x\n",
 				rx->index,
 				rx->head, rx->tail,
 				rx->last_processed
-					? rx->last_processed->dma
+					? (unsigned long long)
+						rx->last_processed->dma
 					: 0,
 				completed ? ", completed" : "",
 				csr);
@@ -1167,8 +1169,11 @@ irqreturn_t cppi_interrupt(int irq, void *dev_id)
 	tx = musb_readl(tibase, DAVINCI_TXCPPI_MASKED_REG);
 	rx = musb_readl(tibase, DAVINCI_RXCPPI_MASKED_REG);
 
-	if (!tx && !rx)
+	if (!tx && !rx) {
+		if (cppi->irq)
+			spin_unlock_irqrestore(&musb->lock, flags);
 		return IRQ_NONE;
+	}
 
 	DBG(4, "CPPI IRQ Tx%x Rx%x\n", tx, rx);
 
@@ -1199,7 +1204,7 @@ irqreturn_t cppi_interrupt(int irq, void *dev_id)
 		 */
 		if (NULL == bd) {
 			DBG(1, "null BD\n");
-			tx_ram->tx_complete = 0;
+			musb_writel(&tx_ram->tx_complete, 0, 0);
 			continue;
 		}
 
@@ -1452,7 +1457,7 @@ static int cppi_channel_abort(struct dma_channel *channel)
 		 *    compare mode by writing 1 to the tx_complete register.
 		 */
 		cppi_reset_tx(tx_ram, 1);
-		cppi_ch->head = 0;
+		cppi_ch->head = NULL;
 		musb_writel(&tx_ram->tx_complete, 0, 1);
 		cppi_dump_tx(5, cppi_ch, " (done teardown)");
 

drivers/usb/musb/musb_core.c

@@ -1030,6 +1030,7 @@ static void musb_shutdown(struct platform_device *pdev)
 	struct musb	*musb = dev_to_musb(&pdev->dev);
 	unsigned long	flags;
 
+	pm_runtime_get_sync(musb->controller);
 	spin_lock_irqsave(&musb->lock, flags);
 	musb_platform_disable(musb);
 	musb_generic_disable(musb);
@@ -1040,6 +1041,7 @@ static void musb_shutdown(struct platform_device *pdev)
 	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
 	musb_platform_exit(musb);
 
+	pm_runtime_put(musb->controller);
 	/* FIXME power down */
 }
 

drivers/usb/musb/musb_core.h

@@ -261,6 +261,7 @@ enum musb_g_ep0_state {
  * @try_ilde:	tries to idle the IP
  * @vbus_status: returns vbus status if possible
  * @set_vbus:	forces vbus status
+ * @channel_program: pre check for standard dma channel_program func
  */
 struct musb_platform_ops {
 	int	(*init)(struct musb *musb);
@@ -274,6 +275,10 @@ struct musb_platform_ops {
 
 	int	(*vbus_status)(struct musb *musb);
 	void	(*set_vbus)(struct musb *musb, int on);
+
+	int	(*adjust_channel_params)(struct dma_channel *channel,
+				u16 packet_sz, u8 *mode,
+				dma_addr_t *dma_addr, u32 *len);
 };
 
 /*

drivers/usb/musb/musb_gadget.c

@@ -535,7 +535,7 @@ void musb_g_tx(struct musb *musb, u8 epnum)
 			is_dma = 1;
 			csr |= MUSB_TXCSR_P_WZC_BITS;
 			csr &= ~(MUSB_TXCSR_DMAENAB | MUSB_TXCSR_P_UNDERRUN |
-				 MUSB_TXCSR_TXPKTRDY);
+				 MUSB_TXCSR_TXPKTRDY | MUSB_TXCSR_AUTOSET);
 			musb_writew(epio, MUSB_TXCSR, csr);
 			/* Ensure writebuffer is empty. */
 			csr = musb_readw(epio, MUSB_TXCSR);
@@ -1296,7 +1296,7 @@ static int musb_gadget_dequeue(struct usb_ep *ep, struct usb_request *request)
 	}
 
 	/* if the hardware doesn't have the request, easy ... */
-	if (musb_ep->req_list.next != &request->list || musb_ep->busy)
+	if (musb_ep->req_list.next != &req->list || musb_ep->busy)
 		musb_g_giveback(musb_ep, request, -ECONNRESET);
 
 	/* ... else abort the dma transfer ... */

drivers/usb/musb/musbhsdma.c

@@ -169,6 +169,14 @@ static int dma_channel_program(struct dma_channel *channel,
 	BUG_ON(channel->status == MUSB_DMA_STATUS_UNKNOWN ||
 		channel->status == MUSB_DMA_STATUS_BUSY);
 
+	/* Let targets check/tweak the arguments */
+	if (musb->ops->adjust_channel_params) {
+		int ret = musb->ops->adjust_channel_params(channel,
+			packet_sz, &mode, &dma_addr, &len);
+		if (ret)
+			return ret;
+	}
+
 	/*
 	 * The DMA engine in RTL1.8 and above cannot handle
 	 * DMA addresses that are not aligned to a 4 byte boundary.

drivers/usb/musb/omap2430.c

@@ -259,9 +259,10 @@ static int musb_otg_notifications(struct notifier_block *nb,
 	case USB_EVENT_VBUS:
 		DBG(4, "VBUS Connect\n");
 
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
 		if (musb->gadget_driver)
 			pm_runtime_get_sync(musb->controller);
-
+#endif
 		otg_init(musb->xceiv);
 		break;
 

drivers/usb/musb/ux500.c

@@ -93,6 +93,8 @@ static int __init ux500_probe(struct platform_device *pdev)
 	}
 
 	musb->dev.parent		= &pdev->dev;
+	musb->dev.dma_mask		= pdev->dev.dma_mask;
+	musb->dev.coherent_dma_mask	= pdev->dev.coherent_dma_mask;
 
 	glue->dev			= &pdev->dev;
 	glue->musb			= musb;

drivers/usb/serial/ftdi_sio.c

@@ -151,6 +151,8 @@ static struct ftdi_sio_quirk ftdi_stmclite_quirk = {
  * /sys/bus/usb/ftdi_sio/new_id, then send patch/report!
  */
 static struct usb_device_id id_table_combined [] = {
+	{ USB_DEVICE(FTDI_VID, FTDI_CTI_MINI_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_CTI_NANO_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
@@ -525,6 +527,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_8_PID) },
 	{ USB_DEVICE(IDTECH_VID, IDTECH_IDT1221U_PID) },
 	{ USB_DEVICE(OCT_VID, OCT_US101_PID) },
+	{ USB_DEVICE(OCT_VID, OCT_DK201_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_HE_TIRA1_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_HE_TIRA1_quirk },
 	{ USB_DEVICE(FTDI_VID, FTDI_USB_UIRT_PID),
@@ -787,6 +790,8 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) },
+	{ USB_DEVICE(FTDI_VID, HAMEG_HO720_PID) },
+	{ USB_DEVICE(FTDI_VID, HAMEG_HO730_PID) },
 	{ USB_DEVICE(FTDI_VID, HAMEG_HO870_PID) },
 	{ USB_DEVICE(FTDI_VID, MJSG_GENERIC_PID) },
 	{ USB_DEVICE(FTDI_VID, MJSG_SR_RADIO_PID) },

drivers/usb/serial/ftdi_sio_ids.h

@@ -300,6 +300,8 @@
  * Hameg HO820 and HO870 interface (using VID 0x0403)
  */
 #define HAMEG_HO820_PID			0xed74
+#define HAMEG_HO730_PID			0xed73
+#define HAMEG_HO720_PID			0xed72
 #define HAMEG_HO870_PID			0xed71
 
 /*
@@ -572,6 +574,7 @@
 /* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */
 /* Also rebadged as Dick Smith Electronics (Aus) XH6451 */
 /* Also rebadged as SIIG Inc. model US2308 hardware version 1 */
+#define OCT_DK201_PID		0x0103	/* OCT DK201 USB docking station */
 #define OCT_US101_PID		0x0421	/* OCT US101 USB to RS-232 */
 
 /*
@@ -1141,3 +1144,12 @@
 #define QIHARDWARE_VID			0x20B7
 #define MILKYMISTONE_JTAGSERIAL_PID	0x0713
 
+/*
+ * CTI GmbH RS485 Converter http://www.cti-lean.com/
+ */
+/* USB-485-Mini*/
+#define FTDI_CTI_MINI_PID	0xF608
+/* USB-Nano-485*/
+#define FTDI_CTI_NANO_PID	0xF60B
+
+

drivers/usb/serial/option.c

@@ -407,6 +407,10 @@ static void option_instat_callback(struct urb *urb);
 /* ONDA MT825UP HSDPA 14.2 modem */
 #define ONDA_MT825UP         0x000b
 
+/* Samsung products */
+#define SAMSUNG_VENDOR_ID                       0x04e8
+#define SAMSUNG_PRODUCT_GT_B3730                0x6889
+
 /* some devices interfaces need special handling due to a number of reasons */
 enum option_blacklist_reason {
 		OPTION_BLACKLIST_NONE = 0,
@@ -968,6 +972,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100) },
 	{ USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */
 	{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_MT825UP) }, /* ONDA MT825UP modem */
+	{ USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_GT_B3730, USB_CLASS_CDC_DATA, 0x00, 0x00) }, /* Samsung GT-B3730/GT-B3710 LTE USB modem.*/
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);

drivers/usb/serial/qcserial.c

@@ -111,7 +111,7 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 	ifnum = intf->desc.bInterfaceNumber;
 	dbg("This Interface = %d", ifnum);
 
-	data = serial->private = kzalloc(sizeof(struct usb_wwan_intf_private),
+	data = kzalloc(sizeof(struct usb_wwan_intf_private),
 					 GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
@@ -134,8 +134,10 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 		    usb_endpoint_is_bulk_out(&intf->endpoint[1].desc)) {
 			dbg("QDL port found");
 
-			if (serial->interface->num_altsetting == 1)
-				return 0;
+			if (serial->interface->num_altsetting == 1) {
+				retval = 0; /* Success */
+				break;
+			}
 
 			retval = usb_set_interface(serial->dev, ifnum, 1);
 			if (retval < 0) {
@@ -145,7 +147,6 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 				retval = -ENODEV;
 				kfree(data);
 			}
-			return retval;
 		}
 		break;
 
@@ -166,6 +167,7 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 					"Could not set interface, error %d\n",
 					retval);
 				retval = -ENODEV;
+				kfree(data);
 			}
 		} else if (ifnum == 2) {
 			dbg("Modem port found");
@@ -177,7 +179,6 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 				retval = -ENODEV;
 				kfree(data);
 			}
-			return retval;
 		} else if (ifnum==3) {
 			/*
 			 * NMEA (serial line 9600 8N1)
@@ -191,6 +192,7 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 					"Could not set interface, error %d\n",
 					retval);
 				retval = -ENODEV;
+				kfree(data);
 			}
 		}
 		break;
@@ -199,12 +201,27 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 		dev_err(&serial->dev->dev,
 			"unknown number of interfaces: %d\n", nintf);
 		kfree(data);
-		return -ENODEV;
+		retval = -ENODEV;
 	}
 
+	/* Set serial->private if not returning -ENODEV */
+	if (retval != -ENODEV)
+		usb_set_serial_data(serial, data);
 	return retval;
 }
 
+static void qc_release(struct usb_serial *serial)
+{
+	struct usb_wwan_intf_private *priv = usb_get_serial_data(serial);
+
+	dbg("%s", __func__);
+
+	/* Call usb_wwan release & free the private data allocated in qcprobe */
+	usb_wwan_release(serial);
+	usb_set_serial_data(serial, NULL);
+	kfree(priv);
+}
+
 static struct usb_serial_driver qcdevice = {
 	.driver = {
 		.owner     = THIS_MODULE,
@@ -222,7 +239,7 @@ static struct usb_serial_driver qcdevice = {
 	.chars_in_buffer     = usb_wwan_chars_in_buffer,
 	.attach		     = usb_wwan_startup,
 	.disconnect	     = usb_wwan_disconnect,
-	.release	     = usb_wwan_release,
+	.release	     = qc_release,
 #ifdef CONFIG_PM
 	.suspend	     = usb_wwan_suspend,
 	.resume		     = usb_wwan_resume,