Commit 0825c5d0 authored by Linus Torvalds's avatar Linus Torvalds

Merge master.kernel.org:/home/rmk/linux-2.6-arm

parents d6c662d4 e1981680
...@@ -46,10 +46,11 @@ ...@@ -46,10 +46,11 @@
#include <asm/irq.h> #include <asm/irq.h>
#include <asm/mach-types.h> #include <asm/mach-types.h>
//#include <asm/debug-ll.h>
#include <asm/arch/regs-serial.h> #include <asm/arch/regs-serial.h>
#include <asm/arch/regs-lcd.h> #include <asm/arch/regs-lcd.h>
#include <asm/arch/h1940-latch.h>
#include <asm/arch/fb.h> #include <asm/arch/fb.h>
#include <linux/serial_core.h> #include <linux/serial_core.h>
...@@ -59,7 +60,12 @@ ...@@ -59,7 +60,12 @@
#include "cpu.h" #include "cpu.h"
static struct map_desc h1940_iodesc[] __initdata = { static struct map_desc h1940_iodesc[] __initdata = {
/* nothing here yet */ [0] = {
.virtual = (unsigned long)H1940_LATCH,
.pfn = __phys_to_pfn(H1940_PA_LATCH),
.length = SZ_16K,
.type = MT_DEVICE
},
}; };
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
...@@ -92,6 +98,25 @@ static struct s3c2410_uartcfg h1940_uartcfgs[] = { ...@@ -92,6 +98,25 @@ static struct s3c2410_uartcfg h1940_uartcfgs[] = {
} }
}; };
/* Board control latch control */
static unsigned int latch_state = H1940_LATCH_DEFAULT;
void h1940_latch_control(unsigned int clear, unsigned int set)
{
unsigned long flags;
local_irq_save(flags);
latch_state &= ~clear;
latch_state |= set;
__raw_writel(latch_state, H1940_LATCH);
local_irq_restore(flags);
}
EXPORT_SYMBOL_GPL(h1940_latch_control);
/** /**
......
/* arch/arm/mach-s3c2410/s3c2400.h
*
* Copyright (c) 2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* Header file for S3C2400 cpu support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Modifications:
* 09-Fev-2006 LCVR First version, based on s3c2410.h
*/
#ifdef CONFIG_CPU_S3C2400
extern int s3c2400_init(void);
extern void s3c2400_map_io(struct map_desc *mach_desc, int size);
extern void s3c2400_init_uarts(struct s3c2410_uartcfg *cfg, int no);
extern void s3c2400_init_clocks(int xtal);
#else
#define s3c2400_init_clocks NULL
#define s3c2400_init_uarts NULL
#define s3c2400_map_io NULL
#define s3c2400_init NULL
#endif
/* linux/include/asm-arm/arch-s3c2410/h1940-latch.h
*
* (c) 2005 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* iPAQ H1940 series - latch definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_H1940_LATCH_H
#define __ASM_ARCH_H1940_LATCH_H
#ifndef __ASSEMBLY__
#define H1940_LATCH ((void __iomem *)0xF8000000)
#else
#define H1940_LATCH 0xF8000000
#endif
#define H1940_PA_LATCH (S3C2410_CS2)
/* SD layer latch */
#define H1940_LATCH_SDQ1 (1<<16)
#define H1940_LATCH_LCD_P1 (1<<17)
#define H1940_LATCH_LCD_P2 (1<<18)
#define H1940_LATCH_LCD_P3 (1<<19)
#define H1940_LATCH_MAX1698_nSHUTDOWN (1<<20) /* LCD backlight */
#define H1940_LATCH_LED_RED (1<<21)
#define H1940_LATCH_SDQ7 (1<<22)
#define H1940_LATCH_USB_DP (1<<23)
/* CPU layer latch */
#define H1940_LATCH_UDA_POWER (1<<24)
#define H1940_LATCH_AUDIO_POWER (1<<25)
#define H1940_LATCH_SM803_ENABLE (1<<26)
#define H1940_LATCH_LCD_P4 (1<<27)
#define H1940_LATCH_CPUQ5 (1<<28) /* untraced */
#define H1940_LATCH_BLUETOOTH_POWER (1<<29) /* active high */
#define H1940_LATCH_LED_GREEN (1<<30)
#define H1940_LATCH_LED_FLASH (1<<31)
/* default settings */
#define H1940_LATCH_DEFAULT \
H1940_LATCH_LCD_P4 | \
H1940_LATCH_SM803_ENABLE | \
H1940_LATCH_SDQ1 | \
H1940_LATCH_LCD_P1 | \
H1940_LATCH_LCD_P2 | \
H1940_LATCH_LCD_P3 | \
H1940_LATCH_MAX1698_nSHUTDOWN | \
H1940_LATCH_CPUQ5
/* control functions */
extern void h1940_latch_control(unsigned int clear, unsigned int set);
#endif /* __ASM_ARCH_H1940_LATCH_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment