Commit 085e42fb authored by Otavio Salvador's avatar Otavio Salvador Committed by Heiko Stuebner

ARM: dts: rockchip: Use the correct regulator properties on rv1108-evb

The following properties:

- regulator-state-enabled
- regulator-state-disabled
- regulator-state-uv

are not valid ones as per
Documentation/devicetree/bindings/regulator/regulator.txt

Fix it by using the correct properties as per the dt bindings.
Signed-off-by: default avatarOtavio Salvador <otavio@ossystems.com.br>
Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
parent fac33118
......@@ -97,8 +97,8 @@ vdd_core: DCDC_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-state-enabled;
regulator-state-uv = <900000>;
regulator-on-in-suspend;
regulator-suspend-microvolt = <900000>;
};
};
......@@ -107,7 +107,7 @@ vdd_cam: DCDC_REG2 {
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <2000000>;
regulator-state-mem {
regulator-state-disabled;
regulator-off-in-suspend;
};
};
......@@ -116,7 +116,7 @@ vcc_ddr: DCDC_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-state-enabled;
regulator-on-in-suspend;
};
};
......@@ -127,8 +127,8 @@ vcc_io: DCDC_REG4 {
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-state-enabled;
regulator-state-uv = <3300000>;
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
......@@ -139,7 +139,7 @@ vdd_10: LDO_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-state-disabled;
regulator-off-in-suspend;
};
};
......@@ -150,7 +150,7 @@ vcc_18: LDO_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-state-disabled;
regulator-off-in-suspend;
};
};
......@@ -161,8 +161,8 @@ vdd10_pmu: LDO_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-state-enabled;
regulator-state-uv = <1000000>;
regulator-on-in-suspend;
regulator-suspend-microvolt = <1000000>;
};
};
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment