omap2: Convert ARCH_OMAP24XX to ARCH_OMAP2

Convert ARCH_OMAP24XX to ARCH_OMAP2
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/mach-omap2/Kconfig

 comment "OMAP Core Type"
 	depends on ARCH_OMAP2
 
-config ARCH_OMAP24XX
-	bool "OMAP24xx Based System"
-	depends on ARCH_OMAP2
-
 config ARCH_OMAP2420
 	bool "OMAP2420 support"
-	depends on ARCH_OMAP24XX
+	depends on ARCH_OMAP2
 	select OMAP_DM_TIMER
 	select ARCH_OMAP_OTG
 
 config ARCH_OMAP2430
 	bool "OMAP2430 support"
-	depends on ARCH_OMAP24XX
+	depends on ARCH_OMAP2
 
 config ARCH_OMAP34XX
 	bool "OMAP34xx Based System"
@@ -42,7 +38,7 @@ comment "OMAP Board Type"
 
 config MACH_OMAP_GENERIC
 	bool "Generic OMAP board"
-	depends on ARCH_OMAP2 && ARCH_OMAP24XX
+	depends on ARCH_OMAP2
 
 config MACH_OMAP2_TUSB6010
 	bool
@@ -51,16 +47,16 @@ config MACH_OMAP2_TUSB6010
 
 config MACH_OMAP_H4
 	bool "OMAP 2420 H4 board"
-	depends on ARCH_OMAP2 && ARCH_OMAP24XX
+	depends on ARCH_OMAP2
 	select OMAP_DEBUG_DEVICES
 
 config MACH_OMAP_APOLLON
 	bool "OMAP 2420 Apollon board"
-	depends on ARCH_OMAP2 && ARCH_OMAP24XX
+	depends on ARCH_OMAP2
 
 config MACH_OMAP_2430SDP
 	bool "OMAP 2430 SDP board"
-	depends on ARCH_OMAP2 && ARCH_OMAP24XX
+	depends on ARCH_OMAP2
 
 config MACH_OMAP3_BEAGLE
 	bool "OMAP3 BEAGLE board"

arch/arm/mach-omap2/Makefile

@@ -48,7 +48,7 @@ obj-$(CONFIG_ARCH_OMAP2)		+= sdrc2xxx.o
 # Power Management
 ifeq ($(CONFIG_PM),y)
 obj-$(CONFIG_ARCH_OMAP2)		+= pm24xx.o
-obj-$(CONFIG_ARCH_OMAP24XX)		+= sleep24xx.o
+obj-$(CONFIG_ARCH_OMAP2)		+= sleep24xx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o cpuidle34xx.o
 obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
 

arch/arm/mach-omap2/clock.h

@@ -129,7 +129,7 @@ extern const struct clksel_rate gpt_32k_rates[];
 extern const struct clksel_rate gpt_sys_rates[];
 extern const struct clksel_rate gfx_l3_rates[];
 
-#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_CPU_FREQ)
+#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_CPU_FREQ)
 extern void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
 extern void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table);
 #else

arch/arm/mach-omap2/clockdomains.h

@@ -84,7 +84,7 @@ static struct clkdm_dep gfx_sgx_wkdeps[] = {
 
 /* 24XX-specific possible dependencies */
 
-#ifdef CONFIG_ARCH_OMAP24XX
+#ifdef CONFIG_ARCH_OMAP2
 
 /* Wakeup dependency source arrays */
 

arch/arm/mach-omap2/io.c

@@ -55,7 +55,7 @@
  * default mapping provided here.
  */
 
-#ifdef CONFIG_ARCH_OMAP24XX
+#ifdef CONFIG_ARCH_OMAP2
 static struct map_desc omap24xx_io_desc[] __initdata = {
 	{
 		.virtual	= L3_24XX_VIRT,

arch/arm/mach-omap2/mux.c

@@ -75,7 +75,7 @@ void omap_mux_write_array(struct omap_board_mux *board_mux)
 	}
 }
 
-#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_OMAP_MUX)
+#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_OMAP_MUX)
 
 static struct omap_mux_cfg arch_mux_cfg;
 

arch/arm/mach-omap2/powerdomains24xx.h

@@ -30,7 +30,7 @@
 
 /* 24XX powerdomains and dependencies */
 
-#ifdef CONFIG_ARCH_OMAP24XX
+#ifdef CONFIG_ARCH_OMAP2
 
 /* Powerdomains */
 
@@ -82,7 +82,7 @@ static struct powerdomain core_24xx_pwrdm = {
 	},
 };
 
-#endif	   /* CONFIG_ARCH_OMAP24XX */
+#endif	   /* CONFIG_ARCH_OMAP2 */
 
 
 

arch/arm/plat-omap/Kconfig

@@ -124,7 +124,7 @@ config OMAP_MPU_TIMER
 
 config OMAP_32K_TIMER
 	bool "Use 32KHz timer"
-	depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX || ARCH_OMAP4
+	depends on ARCH_OMAP16XX || ARCH_OMAP2 || ARCH_OMAP34XX || ARCH_OMAP4
 	help
 	  Select this option if you want to enable the OMAP 32KHz timer.
 	  This timer saves power compared to the OMAP_MPU_TIMER, and has
@@ -145,7 +145,7 @@ config OMAP_32K_TIMER_HZ
 
 config OMAP_DM_TIMER
 	bool "Use dual-mode timer"
-	depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX || ARCH_OMAP4
+	depends on ARCH_OMAP16XX || ARCH_OMAP2 || ARCH_OMAP34XX || ARCH_OMAP4
 	help
 	 Select this option if you want to use OMAP Dual-Mode timers.
 

arch/arm/plat-omap/devices.c

@@ -244,7 +244,7 @@ int __init omap_mmc_add(const char *name, int id, unsigned long base,
 
 #if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE)
 
-#ifdef CONFIG_ARCH_OMAP24XX
+#ifdef CONFIG_ARCH_OMAP2
 #define	OMAP_RNG_BASE		0x480A0000
 #else
 #define	OMAP_RNG_BASE		0xfffe5000

arch/arm/plat-omap/i2c.c

@@ -50,7 +50,7 @@ static const char name[] = "i2c_omap";
 
 static struct resource i2c_resources[][2] = {
 	{ I2C_RESOURCE_BUILDER(0, 0) },
-#if	defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if	defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
 	{ I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE2, INT_24XX_I2C2_IRQ) },
 #endif
 #if	defined(CONFIG_ARCH_OMAP34XX)
@@ -72,7 +72,7 @@ static struct resource i2c_resources[][2] = {
 static u32 i2c_rate[ARRAY_SIZE(i2c_resources)];
 static struct platform_device omap_i2c_devices[] = {
 	I2C_DEV_BUILDER(1, i2c_resources[0], &i2c_rate[0]),
-#if	defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if	defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
 	I2C_DEV_BUILDER(2, i2c_resources[1], &i2c_rate[1]),
 #endif
 #if	defined(CONFIG_ARCH_OMAP34XX)

arch/arm/plat-omap/include/plat/cpu.h

@@ -114,7 +114,7 @@ unsigned int omap_rev(void);
 #  define OMAP_NAME omap16xx
 # endif
 #endif
-#if (defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX))
+#if (defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX))
 # if (defined(OMAP_NAME) || defined(MULTI_OMAP1))
 #  error "OMAP1 and OMAP2 can't be selected at the same time"
 # endif
@@ -233,7 +233,7 @@ IS_OMAP_SUBCLASS(443x, 0x443)
 #endif
 
 #if defined(MULTI_OMAP2)
-# if defined(CONFIG_ARCH_OMAP24XX)
+# if defined(CONFIG_ARCH_OMAP2)
 #  undef  cpu_is_omap24xx
 #  undef  cpu_is_omap242x
 #  undef  cpu_is_omap243x
@@ -248,7 +248,7 @@ IS_OMAP_SUBCLASS(443x, 0x443)
 #  define cpu_is_omap343x()		is_omap343x()
 # endif
 #else
-# if defined(CONFIG_ARCH_OMAP24XX)
+# if defined(CONFIG_ARCH_OMAP2)
 #  undef  cpu_is_omap24xx
 #  define cpu_is_omap24xx()		1
 # endif
@@ -374,7 +374,7 @@ IS_OMAP_TYPE(3517, 0x3517)
 # define cpu_is_omap1710()		is_omap1710()
 #endif
 
-#if defined(CONFIG_ARCH_OMAP24XX)
+#if defined(CONFIG_ARCH_OMAP2)
 # undef  cpu_is_omap2420
 # undef  cpu_is_omap2422
 # undef  cpu_is_omap2423

arch/arm/plat-omap/include/plat/mcbsp.h

@@ -103,7 +103,7 @@
 #define AUDIO_DMA_TX		OMAP_DMA_MCBSP1_TX
 #define AUDIO_DMA_RX		OMAP_DMA_MCBSP1_RX
 
-#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX) || \
 	defined(CONFIG_ARCH_OMAP4)
 
 #define OMAP_MCBSP_REG_DRR2	0x00

arch/arm/plat-omap/include/plat/menelaus.h

@@ -40,7 +40,7 @@ extern int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV);
 
 extern int menelaus_set_regulator_sleep(int enable, u32 val);
 
-#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_MENELAUS)
+#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_MENELAUS)
 #define omap_has_menelaus()	1
 #else
 #define omap_has_menelaus()	0

arch/arm/plat-omap/include/plat/mux.h

@@ -135,7 +135,7 @@ struct pin_config {
 	const unsigned int 	mux_reg;
 	unsigned char		debug;
 
-#if	defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP24XX)
+#if	defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP2)
 	const unsigned char mask_offset;
 	const unsigned char mask;
 

arch/arm/plat-omap/include/plat/omap24xx.h

@@ -23,8 +23,8 @@
  *
  */
 
-#ifndef __ASM_ARCH_OMAP24XX_H
-#define __ASM_ARCH_OMAP24XX_H
+#ifndef __ASM_ARCH_OMAP2_H
+#define __ASM_ARCH_OMAP2_H
 
 /*
  * Please place only base defines here and put the rest in device
@@ -85,5 +85,5 @@
 #define OMAP24XX_SEC_AES_BASE	(OMAP24XX_SEC_BASE + 0x6000)
 #define OMAP24XX_SEC_PKA_BASE	(OMAP24XX_SEC_BASE + 0x8000)
 
-#endif /* __ASM_ARCH_OMAP24XX_H */
+#endif /* __ASM_ARCH_OMAP2_H */
 

arch/arm/plat-omap/sram.c

@@ -53,7 +53,7 @@
 #define OMAP4_SRAM_PUB_PA	(OMAP4_SRAM_PA + 0x4000)
 #define OMAP4_SRAM_PUB_VA	(OMAP4_SRAM_VA + 0x4000)
 
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
 #define SRAM_BOOTLOADER_SZ	0x00
 #else
 #define SRAM_BOOTLOADER_SZ	0x80

drivers/char/hw_random/Kconfig

@@ -114,7 +114,7 @@ config HW_RANDOM_IXP4XX
 
 config HW_RANDOM_OMAP
 	tristate "OMAP Random Number Generator support"
-	depends on HW_RANDOM && (ARCH_OMAP16XX || ARCH_OMAP24XX)
+	depends on HW_RANDOM && (ARCH_OMAP16XX || ARCH_OMAP2)
 	default HW_RANDOM
  	---help---
  	  This driver provides kernel-side support for the Random Number

drivers/mfd/Kconfig

@@ -94,7 +94,7 @@ config TPS65010
 
 config MENELAUS
 	bool "Texas Instruments TWL92330/Menelaus PM chip"
-	depends on I2C=y && ARCH_OMAP24XX
+	depends on I2C=y && ARCH_OMAP2
 	help
 	  If you say yes here you get support for the Texas Instruments
 	  TWL92330/Menelaus Power Management chip. This include voltage

drivers/net/smc911x.h

@@ -47,7 +47,7 @@
   #define SMC_USE_32BIT		1
   #define SMC_IRQ_SENSE		IRQF_TRIGGER_LOW
   #define SMC_MEM_RESERVED	1
-#elif defined(CONFIG_ARCH_OMAP24XX)
+#elif defined(CONFIG_ARCH_OMAP2)
   #define SMC_USE_16BIT		0
   #define SMC_USE_32BIT		1
   #define SMC_IRQ_SENSE		IRQF_TRIGGER_LOW

drivers/spi/Kconfig

@@ -164,7 +164,7 @@ config SPI_OMAP_UWIRE
 
 config SPI_OMAP24XX
 	tristate "McSPI driver for OMAP24xx/OMAP34xx"
-	depends on ARCH_OMAP24XX || ARCH_OMAP34XX
+	depends on ARCH_OMAP2 || ARCH_OMAP34XX
 	help
 	  SPI master controller for OMAP24xx/OMAP34xx Multichannel SPI
 	  (McSPI) modules.

drivers/watchdog/Kconfig

@@ -194,7 +194,7 @@ config EP93XX_WATCHDOG
 
 config OMAP_WATCHDOG
 	tristate "OMAP Watchdog"
-	depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
+	depends on ARCH_OMAP16XX || ARCH_OMAP2 || ARCH_OMAP34XX
 	help
 	  Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog.  Say 'Y'
 	  here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog timer.

sound/soc/omap/omap-mcbsp.c

@@ -82,7 +82,7 @@ static const int omap1_dma_reqs[][2] = {};
 static const unsigned long omap1_mcbsp_port[][2] = {};
 #endif
 
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP34XX)
 static const int omap24xx_dma_reqs[][2] = {
 	{ OMAP24XX_DMA_MCBSP1_TX, OMAP24XX_DMA_MCBSP1_RX },
 	{ OMAP24XX_DMA_MCBSP2_TX, OMAP24XX_DMA_MCBSP2_RX },