arch64: dts: qcom: sm8250: add uart nodes

Currently sm8250.dtsi only defines default debug uart. Port rest uart
nodes from the downstream dtsi file.
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20200909103238.149761-1-dmitry.baryshkov@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arch/arm64/boot/dts/qcom/sm8250.dtsi

@@ -526,6 +526,17 @@ spi17: spi@88c000 {
 				status = "disabled";
 			};
 
+			uart17: serial@88c000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart17_default>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
 			i2c18: i2c@890000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00890000 0 0x4000>;
@@ -552,6 +563,17 @@ spi18: spi@890000 {
 				status = "disabled";
 			};
 
+			uart18: serial@890000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart18_default>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
 			i2c19: i2c@894000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00894000 0 0x4000>;
@@ -668,6 +690,17 @@ spi2: spi@988000 {
 				status = "disabled";
 			};
 
+			uart2: serial@988000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0 0x00988000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
 			i2c3: i2c@98c000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x0098c000 0 0x4000>;
@@ -772,6 +805,17 @@ spi6: spi@998000 {
 				status = "disabled";
 			};
 
+			uart6: serial@998000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x00998000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_uart6_default>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
 			i2c7: i2c@99c000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x0099c000 0 0x4000>;
@@ -1888,12 +1932,42 @@ config {
 				};
 			};
 
+			qup_uart2_default: qup-uart2-default {
+				mux {
+					pins = "gpio117", "gpio118";
+					function = "qup2";
+				};
+			};
+
+			qup_uart6_default: qup-uart6-default {
+				mux {
+					pins = "gpio16", "gpio17",
+						"gpio18", "gpio19";
+					function = "qup6";
+				};
+			};
+
 			qup_uart12_default: qup-uart12-default {
 				mux {
 					pins = "gpio34", "gpio35";
 					function = "qup12";
 				};
 			};
+
+			qup_uart17_default: qup-uart17-default {
+				mux {
+					pins = "gpio52", "gpio53",
+						"gpio54", "gpio55";
+					function = "qup17";
+				};
+			};
+
+			qup_uart18_default: qup-uart18-default {
+				mux {
+					pins = "gpio58", "gpio59";
+					function = "qup18";
+				};
+			};
 		};
 
 		adsp: remoteproc@17300000 {