Commit 08aeb7c9 authored by Jarod Wilson's avatar Jarod Wilson Committed by Mauro Carvalho Chehab

[media] rc: add locking to fix register/show race

When device_add is called in rc_register_device, the rc sysfs nodes show
up, and there's a window in which ir-keytable can be launched via udev
and trigger a show_protocols call, which runs without various rc_dev
fields filled in yet. Add some locking around registration and
store/show_protocols to prevent that from happening.

The problem manifests thusly:

[64692.957872] BUG: unable to handle kernel NULL pointer dereference at 0000000000000090
[64692.957878] IP: [<ffffffffa036a4c1>] show_protocols+0x47/0xf1 [rc_core]
[64692.957890] PGD 19cfc7067 PUD 19cfc6067 PMD 0
[64692.957894] Oops: 0000 [#1] SMP
[64692.957897] last sysfs file: /sys/devices/pci0000:00/0000:00:03.1/usb3/3-1/3-1:1.0/rc/rc2/protocols
[64692.957902] CPU 3
[64692.957903] Modules linked in: redrat3(+) ir_lirc_codec lirc_dev ir_sony_decoder ir_jvc_decoder ir_rc6_decoder ir_rc5_decoder rc_hauppauge ir_nec
_decoder rc_core ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_mi
di_event snd_seq_midi_emul snd_emu10k1 snd_rawmidi snd_ac97_codec ac97_bus snd_seq snd_pcm snd_seq_device snd_timer snd_page_alloc snd_util_mem pcsp
kr tg3 snd_hwdep emu10k1_gp snd amd64_edac_mod gameport edac_core soundcore edac_mce_amd k8temp shpchp i2c_piix4 lm63 e100 mii uinput ipv6 raid0 rai
d1 ata_generic firewire_ohci pata_acpi firewire_core crc_itu_t sata_svw pata_serverworks floppy radeon ttm drm_kms_helper drm i2c_algo_bit i2c_core
[last unloaded: redrat3]
[64692.957949] [64692.957952] Pid: 12265, comm: ir-keytable Tainted: G   M    W   2.6.39-rc6+ #2 empty empty/TYAN Thunder K8HM S3892
[64692.957957] RIP: 0010:[<ffffffffa036a4c1>]  [<ffffffffa036a4c1>] show_protocols+0x47/0xf1 [rc_core]
[64692.957962] RSP: 0018:ffff880194509e38  EFLAGS: 00010202
[64692.957964] RAX: 0000000000000000 RBX: ffffffffa036d1e0 RCX: ffffffffa036a47a
[64692.957966] RDX: ffff88019a84d000 RSI: ffffffffa036d1e0 RDI: ffff88019cf2f3f0
[64692.957969] RBP: ffff880194509e68 R08: 0000000000000002 R09: 0000000000000000
[64692.957971] R10: 0000000000000002 R11: 0000000000001617 R12: ffff88019a84d000
[64692.957973] R13: 0000000000001000 R14: ffff8801944d2e38 R15: ffff88019ce5f190
[64692.957976] FS:  00007f0a30c9a720(0000) GS:ffff88019fc00000(0000) knlGS:0000000000000000
[64692.957979] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[64692.957981] CR2: 0000000000000090 CR3: 000000019a8e0000 CR4: 00000000000006e0
[64692.957983] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[64692.957986] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[64692.957989] Process ir-keytable (pid: 12265, threadinfo ffff880194508000, task ffff88019a9fc720)
[64692.957991] Stack:
[64692.957992]  0000000000000002 ffffffffa036d1e0 ffff880194509f58 0000000000001000
[64692.957997]  ffff8801944d2e38 ffff88019ce5f190 ffff880194509e98 ffffffff8131484b
[64692.958001]  ffffffff8118e923 ffffffff810e9b2f ffff880194509e98 ffff8801944d2e18
[64692.958005] Call Trace:
[64692.958014]  [<ffffffff8131484b>] dev_attr_show+0x27/0x4e
[64692.958014]  [<ffffffff8118e923>] ? sysfs_read_file+0x94/0x172
[64692.958014]  [<ffffffff810e9b2f>] ? __get_free_pages+0x16/0x52
[64692.958014]  [<ffffffff8118e94c>] sysfs_read_file+0xbd/0x172
[64692.958014]  [<ffffffff8113205e>] vfs_read+0xac/0xf3
[64692.958014]  [<ffffffff8113347b>] ? fget_light+0x3a/0xa1
[64692.958014]  [<ffffffff811320f2>] sys_read+0x4d/0x74
[64692.958014]  [<ffffffff814c19c2>] system_call_fastpath+0x16/0x1b

Its a bit difficult to reproduce, but I'm fairly confident this has
fixed the problem.
Signed-off-by: default avatarJarod Wilson <jarod@redhat.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 51ea6292
......@@ -749,6 +749,9 @@ static struct {
* it is trigged by reading /sys/class/rc/rc?/protocols.
* It returns the protocol names of supported protocols.
* Enabled protocols are printed in brackets.
*
* dev->lock is taken to guard against races between device
* registration, store_protocols and show_protocols.
*/
static ssize_t show_protocols(struct device *device,
struct device_attribute *mattr, char *buf)
......@@ -762,6 +765,8 @@ static ssize_t show_protocols(struct device *device,
if (!dev)
return -EINVAL;
mutex_lock(&dev->lock);
if (dev->driver_type == RC_DRIVER_SCANCODE) {
enabled = dev->rc_map.rc_type;
allowed = dev->allowed_protos;
......@@ -784,6 +789,9 @@ static ssize_t show_protocols(struct device *device,
if (tmp != buf)
tmp--;
*tmp = '\n';
mutex_unlock(&dev->lock);
return tmp + 1 - buf;
}
......@@ -802,6 +810,9 @@ static ssize_t show_protocols(struct device *device,
* Writing "none" will disable all protocols.
* Returns -EINVAL if an invalid protocol combination or unknown protocol name
* is used, otherwise @len.
*
* dev->lock is taken to guard against races between device
* registration, store_protocols and show_protocols.
*/
static ssize_t store_protocols(struct device *device,
struct device_attribute *mattr,
......@@ -815,18 +826,22 @@ static ssize_t store_protocols(struct device *device,
u64 mask;
int rc, i, count = 0;
unsigned long flags;
ssize_t ret;
/* Device is being removed */
if (!dev)
return -EINVAL;
mutex_lock(&dev->lock);
if (dev->driver_type == RC_DRIVER_SCANCODE)
type = dev->rc_map.rc_type;
else if (dev->raw)
type = dev->raw->enabled_protocols;
else {
IR_dprintk(1, "Protocol switching not supported\n");
return -EINVAL;
ret = -EINVAL;
goto out;
}
while ((tmp = strsep((char **) &data, " \n")) != NULL) {
......@@ -860,7 +875,8 @@ static ssize_t store_protocols(struct device *device,
}
if (i == ARRAY_SIZE(proto_names)) {
IR_dprintk(1, "Unknown protocol: '%s'\n", tmp);
return -EINVAL;
ret = -EINVAL;
goto out;
}
count++;
}
......@@ -875,7 +891,8 @@ static ssize_t store_protocols(struct device *device,
if (!count) {
IR_dprintk(1, "Protocol not specified\n");
return -EINVAL;
ret = -EINVAL;
goto out;
}
if (dev->change_protocol) {
......@@ -883,7 +900,8 @@ static ssize_t store_protocols(struct device *device,
if (rc < 0) {
IR_dprintk(1, "Error setting protocols to 0x%llx\n",
(long long)type);
return -EINVAL;
ret = -EINVAL;
goto out;
}
}
......@@ -898,7 +916,11 @@ static ssize_t store_protocols(struct device *device,
IR_dprintk(1, "Current protocol(s): 0x%llx\n",
(long long)type);
return len;
ret = len;
out:
mutex_unlock(&dev->lock);
return ret;
}
static void rc_dev_release(struct device *device)
......@@ -974,6 +996,7 @@ struct rc_dev *rc_allocate_device(void)
spin_lock_init(&dev->rc_map.lock);
spin_lock_init(&dev->keylock);
mutex_init(&dev->lock);
setup_timer(&dev->timer_keyup, ir_timer_keyup, (unsigned long)dev);
dev->dev.type = &rc_dev_type;
......@@ -1019,12 +1042,21 @@ int rc_register_device(struct rc_dev *dev)
if (dev->close)
dev->input_dev->close = ir_close;
/*
* Take the lock here, as the device sysfs node will appear
* when device_add() is called, which may trigger an ir-keytable udev
* rule, which will in turn call show_protocols and access either
* dev->rc_map.rc_type or dev->raw->enabled_protocols before it has
* been initialized.
*/
mutex_lock(&dev->lock);
dev->devno = (unsigned long)(atomic_inc_return(&devno) - 1);
dev_set_name(&dev->dev, "rc%ld", dev->devno);
dev_set_drvdata(&dev->dev, dev);
rc = device_add(&dev->dev);
if (rc)
return rc;
goto out_unlock;
rc = ir_setkeytable(dev, rc_map);
if (rc)
......@@ -1058,6 +1090,7 @@ int rc_register_device(struct rc_dev *dev)
if (rc < 0)
goto out_input;
}
mutex_unlock(&dev->lock);
if (dev->change_protocol) {
rc = dev->change_protocol(dev, rc_map->rc_type);
......@@ -1083,6 +1116,8 @@ int rc_register_device(struct rc_dev *dev)
ir_free_table(&dev->rc_map);
out_dev:
device_del(&dev->dev);
out_unlock:
mutex_unlock(&dev->lock);
return rc;
}
EXPORT_SYMBOL_GPL(rc_register_device);
......
......@@ -40,10 +40,12 @@ enum rc_driver_type {
* @driver_name: name of the hardware driver which registered this device
* @map_name: name of the default keymap
* @rc_map: current scan/key table
* @lock: used to ensure we've filled in all protocol details before
* anyone can call show_protocols or store_protocols
* @devno: unique remote control device number
* @raw: additional data for raw pulse/space devices
* @input_dev: the input child device used to communicate events to userspace
* @driver_type: specifies if protocol decoding is done in hardware or software
* @driver_type: specifies if protocol decoding is done in hardware or software
* @idle: used to keep track of RX state
* @allowed_protos: bitmask with the supported RC_TYPE_* protocols
* @scanmask: some hardware decoders are not capable of providing the full
......@@ -86,7 +88,8 @@ struct rc_dev {
struct input_id input_id;
char *driver_name;
const char *map_name;
struct rc_map rc_map;
struct rc_map rc_map;
struct mutex lock;
unsigned long devno;
struct ir_raw_event_ctrl *raw;
struct input_dev *input_dev;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment