usb: dwc2: host: reset frame number after suspend

Frame number is reset in hardware after exiting hibernation.
Thus, reset frame_number and ensure qh are queued with correct
sched_frame.

Otherwise, qh->sched_frame may be too high compared to
current frame number (which is 0). This can delay addition of qh in
the list of transfers until frame number reaches qh->sched_frame.
Signed-off-by: Gregory Herrero <gregory.herrero@intel.com>
Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com>
Tested-by: Robert Baldyga <r.baldyga@samsung.com>
Tested-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Tested-by: John Youn <johnyoun@synopsys.com>
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

drivers/usb/dwc2/core.c

@@ -116,6 +116,7 @@ static int dwc2_restore_host_registers(struct dwc2_hsotg *hsotg)
 
 	dwc2_writel(hr->hprt0, hsotg->regs + HPRT0);
 	dwc2_writel(hr->hfir, hsotg->regs + HFIR);
+	hsotg->frame_number = 0;
 
 	return 0;
 }

drivers/usb/dwc2/hcd_queue.c

@@ -583,6 +583,14 @@ int dwc2_hcd_qh_add(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
 		/* QH already in a schedule */
 		return 0;
 
+	if (!dwc2_frame_num_le(qh->sched_frame, hsotg->frame_number) &&
+			!hsotg->frame_number) {
+		dev_dbg(hsotg->dev,
+				"reset frame number counter\n");
+		qh->sched_frame = dwc2_frame_num_inc(hsotg->frame_number,
+				SCHEDULE_SLOP);
+	}
+
 	/* Add the new QH to the appropriate schedule */
 	if (dwc2_qh_is_non_per(qh)) {
 		/* Always start in inactive schedule */