Commit 093292b8 authored by James Cowgill's avatar James Cowgill Committed by Greg Kroah-Hartman

MIPS: OCTEON: Fix copy_from_user fault handling for large buffers

commit 884b4269 upstream.

If copy_from_user is called with a large buffer (>= 128 bytes) and the
userspace buffer refers partially to unreadable memory, then it is
possible for Octeon's copy_from_user to report the wrong number of bytes
have been copied. In the case where the buffer size is an exact multiple
of 128 and the fault occurs in the last 64 bytes, copy_from_user will
report that all the bytes were copied successfully but leave some
garbage in the destination buffer.

The bug is in the main __copy_user_common loop in octeon-memcpy.S where
in the middle of the loop, src and dst are incremented by 128 bytes. The
l_exc_copy fault handler is used after this but that assumes that
"src < THREAD_BUADDR($28)". This is not the case if src has already been
incremented.

Fix by adding an extra fault handler which rewinds the src and dst
pointers 128 bytes before falling though to l_exc_copy.

Thanks to the pwritev test from the strace test suite for originally
highlighting this bug!

Fixes: 5b3b1688 ("MIPS: Add Cavium OCTEON processor support ...")
Signed-off-by: default avatarJames Cowgill <James.Cowgill@imgtec.com>
Acked-by: default avatarDavid Daney <david.daney@cavium.com>
Reviewed-by: default avatarJames Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14978/Signed-off-by: default avatarJames Hogan <james.hogan@imgtec.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent b32e43cf
......@@ -208,18 +208,18 @@ EXC( STORE t2, UNIT(6)(dst), s_exc_p10u)
ADD src, src, 16*NBYTES
EXC( STORE t3, UNIT(7)(dst), s_exc_p9u)
ADD dst, dst, 16*NBYTES
EXC( LOAD t0, UNIT(-8)(src), l_exc_copy)
EXC( LOAD t1, UNIT(-7)(src), l_exc_copy)
EXC( LOAD t2, UNIT(-6)(src), l_exc_copy)
EXC( LOAD t3, UNIT(-5)(src), l_exc_copy)
EXC( LOAD t0, UNIT(-8)(src), l_exc_copy_rewind16)
EXC( LOAD t1, UNIT(-7)(src), l_exc_copy_rewind16)
EXC( LOAD t2, UNIT(-6)(src), l_exc_copy_rewind16)
EXC( LOAD t3, UNIT(-5)(src), l_exc_copy_rewind16)
EXC( STORE t0, UNIT(-8)(dst), s_exc_p8u)
EXC( STORE t1, UNIT(-7)(dst), s_exc_p7u)
EXC( STORE t2, UNIT(-6)(dst), s_exc_p6u)
EXC( STORE t3, UNIT(-5)(dst), s_exc_p5u)
EXC( LOAD t0, UNIT(-4)(src), l_exc_copy)
EXC( LOAD t1, UNIT(-3)(src), l_exc_copy)
EXC( LOAD t2, UNIT(-2)(src), l_exc_copy)
EXC( LOAD t3, UNIT(-1)(src), l_exc_copy)
EXC( LOAD t0, UNIT(-4)(src), l_exc_copy_rewind16)
EXC( LOAD t1, UNIT(-3)(src), l_exc_copy_rewind16)
EXC( LOAD t2, UNIT(-2)(src), l_exc_copy_rewind16)
EXC( LOAD t3, UNIT(-1)(src), l_exc_copy_rewind16)
EXC( STORE t0, UNIT(-4)(dst), s_exc_p4u)
EXC( STORE t1, UNIT(-3)(dst), s_exc_p3u)
EXC( STORE t2, UNIT(-2)(dst), s_exc_p2u)
......@@ -383,6 +383,10 @@ done:
nop
END(memcpy)
l_exc_copy_rewind16:
/* Rewind src and dst by 16*NBYTES for l_exc_copy */
SUB src, src, 16*NBYTES
SUB dst, dst, 16*NBYTES
l_exc_copy:
/*
* Copy bytes from src until faulting load address (or until a
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment