irqchip: mips-gic: Remove counter access functions

The MIPS GIC clocksource driver is no longer using the accessor
functions provided by the irqchip driver, so remove them.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17022/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

drivers/irqchip/irq-mips-gic.c

@@ -138,101 +138,6 @@ static inline void gic_map_to_vpe(unsigned int intr, unsigned int vpe)
 		  GIC_SH_MAP_TO_VPE_REG_BIT(vpe));
 }
 
-#ifdef CONFIG_CLKSRC_MIPS_GIC
-u64 notrace gic_read_count(void)
-{
-	unsigned int hi, hi2, lo;
-
-	if (mips_cm_is64)
-		return (u64)gic_read(GIC_REG(SHARED, GIC_SH_COUNTER));
-
-	do {
-		hi = gic_read32(GIC_REG(SHARED, GIC_SH_COUNTER_63_32));
-		lo = gic_read32(GIC_REG(SHARED, GIC_SH_COUNTER_31_00));
-		hi2 = gic_read32(GIC_REG(SHARED, GIC_SH_COUNTER_63_32));
-	} while (hi2 != hi);
-
-	return (((u64) hi) << 32) + lo;
-}
-
-unsigned int gic_get_count_width(void)
-{
-	unsigned int bits, config;
-
-	config = gic_read(GIC_REG(SHARED, GIC_SH_CONFIG));
-	bits = 32 + 4 * ((config & GIC_SH_CONFIG_COUNTBITS_MSK) >>
-			 GIC_SH_CONFIG_COUNTBITS_SHF);
-
-	return bits;
-}
-
-void notrace gic_write_compare(u64 cnt)
-{
-	if (mips_cm_is64) {
-		gic_write(GIC_REG(VPE_LOCAL, GIC_VPE_COMPARE), cnt);
-	} else {
-		gic_write32(GIC_REG(VPE_LOCAL, GIC_VPE_COMPARE_HI),
-					(int)(cnt >> 32));
-		gic_write32(GIC_REG(VPE_LOCAL, GIC_VPE_COMPARE_LO),
-					(int)(cnt & 0xffffffff));
-	}
-}
-
-void notrace gic_write_cpu_compare(u64 cnt, int cpu)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	gic_write(GIC_REG(VPE_LOCAL, GIC_VPE_OTHER_ADDR), mips_cm_vp_id(cpu));
-
-	if (mips_cm_is64) {
-		gic_write(GIC_REG(VPE_OTHER, GIC_VPE_COMPARE), cnt);
-	} else {
-		gic_write32(GIC_REG(VPE_OTHER, GIC_VPE_COMPARE_HI),
-					(int)(cnt >> 32));
-		gic_write32(GIC_REG(VPE_OTHER, GIC_VPE_COMPARE_LO),
-					(int)(cnt & 0xffffffff));
-	}
-
-	local_irq_restore(flags);
-}
-
-u64 gic_read_compare(void)
-{
-	unsigned int hi, lo;
-
-	if (mips_cm_is64)
-		return (u64)gic_read(GIC_REG(VPE_LOCAL, GIC_VPE_COMPARE));
-
-	hi = gic_read32(GIC_REG(VPE_LOCAL, GIC_VPE_COMPARE_HI));
-	lo = gic_read32(GIC_REG(VPE_LOCAL, GIC_VPE_COMPARE_LO));
-
-	return (((u64) hi) << 32) + lo;
-}
-
-void gic_start_count(void)
-{
-	u32 gicconfig;
-
-	/* Start the counter */
-	gicconfig = gic_read(GIC_REG(SHARED, GIC_SH_CONFIG));
-	gicconfig &= ~(1 << GIC_SH_CONFIG_COUNTSTOP_SHF);
-	gic_write(GIC_REG(SHARED, GIC_SH_CONFIG), gicconfig);
-}
-
-void gic_stop_count(void)
-{
-	u32 gicconfig;
-
-	/* Stop the counter */
-	gicconfig = gic_read(GIC_REG(SHARED, GIC_SH_CONFIG));
-	gicconfig |= 1 << GIC_SH_CONFIG_COUNTSTOP_SHF;
-	gic_write(GIC_REG(SHARED, GIC_SH_CONFIG), gicconfig);
-}
-
-#endif
-
 unsigned gic_read_local_vp_id(void)
 {
 	unsigned long ident;

include/linux/irqchip/mips-gic.h

@@ -40,11 +40,6 @@
 
 #define GIC_SH_CONFIG_OFS		0x0000
 
-/* Shared Global Counter */
-#define GIC_SH_COUNTER_31_00_OFS	0x0010
-/* 64-bit counter register for CM3 */
-#define GIC_SH_COUNTER_OFS		GIC_SH_COUNTER_31_00_OFS
-#define GIC_SH_COUNTER_63_32_OFS	0x0014
 #define GIC_SH_REVISIONID_OFS		0x0020
 
 /* Convert an interrupt number to a byte offset/bit for multi-word registers */
@@ -107,10 +102,6 @@
 #define GIC_VPE_WD_CONFIG0_OFS		0x0090
 #define GIC_VPE_WD_COUNT0_OFS		0x0094
 #define GIC_VPE_WD_INITIAL0_OFS		0x0098
-#define GIC_VPE_COMPARE_LO_OFS		0x00a0
-/* 64-bit Compare register on CM3 */
-#define GIC_VPE_COMPARE_OFS		GIC_VPE_COMPARE_LO_OFS
-#define GIC_VPE_COMPARE_HI_OFS		0x00a4
 
 #define GIC_VPE_EIC_SHADOW_SET_BASE_OFS	0x0100
 #define GIC_VPE_EIC_SS(intr)		(4 * (intr))
@@ -128,12 +119,6 @@
 #define GIC_UMV_SH_COUNTER_63_32_OFS	0x0004
 
 /* Masks */
-#define GIC_SH_CONFIG_COUNTSTOP_SHF	28
-#define GIC_SH_CONFIG_COUNTSTOP_MSK	(MSK(1) << GIC_SH_CONFIG_COUNTSTOP_SHF)
-
-#define GIC_SH_CONFIG_COUNTBITS_SHF	24
-#define GIC_SH_CONFIG_COUNTBITS_MSK	(MSK(4) << GIC_SH_CONFIG_COUNTBITS_SHF)
-
 #define GIC_SH_CONFIG_NUMINTRS_SHF	16
 #define GIC_SH_CONFIG_NUMINTRS_MSK	(MSK(8) << GIC_SH_CONFIG_NUMINTRS_SHF)
 
@@ -258,13 +243,6 @@ extern unsigned int gic_present;
 extern void gic_init(unsigned long gic_base_addr,
 	unsigned long gic_addrspace_size, unsigned int cpu_vec,
 	unsigned int irqbase);
-extern u64 gic_read_count(void);
-extern unsigned int gic_get_count_width(void);
-extern u64 gic_read_compare(void);
-extern void gic_write_compare(u64 cnt);
-extern void gic_write_cpu_compare(u64 cnt, int cpu);
-extern void gic_start_count(void);
-extern void gic_stop_count(void);
 extern int gic_get_c0_compare_int(void);
 extern int gic_get_c0_perfcount_int(void);
 extern int gic_get_c0_fdc_int(void);