Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth

Johan Hedberg says:

====================
pull request: bluetooth 2015-11-05

The following set of Bluetooth patches would be good to get into 4.4-rc1
if possible:

 - Fix for missing LE CoC parameter validity checks
 - Fix for potential deadlock in btusb
 - Fix for issuing unsupported commands during HCI init

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/bluetooth/btusb.c

@@ -1372,6 +1372,8 @@ static void btusb_work(struct work_struct *work)
 		}
 
 		if (data->isoc_altsetting != new_alts) {
+			unsigned long flags;
+
 			clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
 			usb_kill_anchored_urbs(&data->isoc_anchor);
 
@@ -1384,10 +1386,10 @@ static void btusb_work(struct work_struct *work)
 			 * Clear outstanding fragment when selecting a new
 			 * alternate setting.
 			 */
-			spin_lock(&data->rxlock);
+			spin_lock_irqsave(&data->rxlock, flags);
 			kfree_skb(data->sco_skb);
 			data->sco_skb = NULL;
-			spin_unlock(&data->rxlock);
+			spin_unlock_irqrestore(&data->rxlock, flags);
 
 			if (__set_isoc_interface(hdev, new_alts) < 0)
 				return;

include/net/bluetooth/l2cap.h

@@ -275,6 +275,8 @@ struct l2cap_conn_rsp {
 #define L2CAP_CR_AUTHORIZATION	0x0006
 #define L2CAP_CR_BAD_KEY_SIZE	0x0007
 #define L2CAP_CR_ENCRYPTION	0x0008
+#define L2CAP_CR_INVALID_SCID	0x0009
+#define L2CAP_CR_SCID_IN_USE	0x0010
 
 /* connect/create channel status */
 #define L2CAP_CS_NO_INFO	0x0000

net/bluetooth/hci_core.c

@@ -508,12 +508,6 @@ static void le_setup(struct hci_request *req)
 	/* Read LE Supported States */
 	hci_req_add(req, HCI_OP_LE_READ_SUPPORTED_STATES, 0, NULL);
 
-	/* Read LE White List Size */
-	hci_req_add(req, HCI_OP_LE_READ_WHITE_LIST_SIZE, 0, NULL);
-
-	/* Clear LE White List */
-	hci_req_add(req, HCI_OP_LE_CLEAR_WHITE_LIST, 0, NULL);
-
 	/* LE-only controllers have LE implicitly enabled */
 	if (!lmp_bredr_capable(hdev))
 		hci_dev_set_flag(hdev, HCI_LE_ENABLED);
@@ -832,6 +826,17 @@ static void hci_init3_req(struct hci_request *req, unsigned long opt)
 			hci_req_add(req, HCI_OP_LE_READ_ADV_TX_POWER, 0, NULL);
 		}
 
+		if (hdev->commands[26] & 0x40) {
+			/* Read LE White List Size */
+			hci_req_add(req, HCI_OP_LE_READ_WHITE_LIST_SIZE,
+				    0, NULL);
+		}
+
+		if (hdev->commands[26] & 0x80) {
+			/* Clear LE White List */
+			hci_req_add(req, HCI_OP_LE_CLEAR_WHITE_LIST, 0, NULL);
+		}
+
 		if (hdev->le_features[0] & HCI_LE_DATA_LEN_EXT) {
 			/* Read LE Maximum Data Length */
 			hci_req_add(req, HCI_OP_LE_READ_MAX_DATA_LEN, 0, NULL);

net/bluetooth/l2cap_core.c

@@ -239,7 +239,7 @@ static u16 l2cap_alloc_cid(struct l2cap_conn *conn)
 	else
 		dyn_end = L2CAP_CID_DYN_END;
 
-	for (cid = L2CAP_CID_DYN_START; cid < dyn_end; cid++) {
+	for (cid = L2CAP_CID_DYN_START; cid <= dyn_end; cid++) {
 		if (!__l2cap_get_chan_by_scid(conn, cid))
 			return cid;
 	}
@@ -5250,7 +5250,9 @@ static int l2cap_le_connect_rsp(struct l2cap_conn *conn,
 	credits = __le16_to_cpu(rsp->credits);
 	result  = __le16_to_cpu(rsp->result);
 
-	if (result == L2CAP_CR_SUCCESS && (mtu < 23 || mps < 23))
+	if (result == L2CAP_CR_SUCCESS && (mtu < 23 || mps < 23 ||
+					   dcid < L2CAP_CID_DYN_START ||
+					   dcid > L2CAP_CID_LE_DYN_END))
 		return -EPROTO;
 
 	BT_DBG("dcid 0x%4.4x mtu %u mps %u credits %u result 0x%2.2x",
@@ -5270,6 +5272,11 @@ static int l2cap_le_connect_rsp(struct l2cap_conn *conn,
 
 	switch (result) {
 	case L2CAP_CR_SUCCESS:
+		if (__l2cap_get_chan_by_dcid(conn, dcid)) {
+			err = -EBADSLT;
+			break;
+		}
+
 		chan->ident = 0;
 		chan->dcid = dcid;
 		chan->omtu = mtu;
@@ -5437,9 +5444,16 @@ static int l2cap_le_connect_req(struct l2cap_conn *conn,
 		goto response_unlock;
 	}
 
+	/* Check for valid dynamic CID range */
+	if (scid < L2CAP_CID_DYN_START || scid > L2CAP_CID_LE_DYN_END) {
+		result = L2CAP_CR_INVALID_SCID;
+		chan = NULL;
+		goto response_unlock;
+	}
+
 	/* Check if we already have channel with that dcid */
 	if (__l2cap_get_chan_by_dcid(conn, scid)) {
-		result = L2CAP_CR_NO_MEM;
+		result = L2CAP_CR_SCID_IN_USE;
 		chan = NULL;
 		goto response_unlock;
 	}