Merge tag 'mmc-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Add SD card quirk for broken discard

  MMC host:
   - renesas_sdhi: Fix clock rounding errors
   - sdhci-sprd: Fix minimum clock limit to detect cards
   - sdhci-tegra: Use actual clock rate for SW tuning correction"

* tag 'mmc-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-sprd: Fix minimum clock limit
  mmc: sdhci-tegra: Use actual clock rate for SW tuning correction
  mmc: renesas_sdhi: Fix rounding errors
  mmc: core: Add SD card quirk for broken discard

drivers/mmc/core/block.c

@@ -1140,8 +1140,12 @@ static void mmc_blk_issue_discard_rq(struct mmc_queue *mq, struct request *req)
 {
 	struct mmc_blk_data *md = mq->blkdata;
 	struct mmc_card *card = md->queue.card;
+	unsigned int arg = card->erase_arg;
 
-	mmc_blk_issue_erase_rq(mq, req, MMC_BLK_DISCARD, card->erase_arg);
+	if (mmc_card_broken_sd_discard(card))
+		arg = SD_ERASE_ARG;
+
+	mmc_blk_issue_erase_rq(mq, req, MMC_BLK_DISCARD, arg);
 }
 
 static void mmc_blk_issue_secdiscard_rq(struct mmc_queue *mq,

drivers/mmc/core/card.h

@@ -73,6 +73,7 @@ struct mmc_fixup {
 #define EXT_CSD_REV_ANY (-1u)
 
 #define CID_MANFID_SANDISK      0x2
+#define CID_MANFID_SANDISK_SD   0x3
 #define CID_MANFID_ATP          0x9
 #define CID_MANFID_TOSHIBA      0x11
 #define CID_MANFID_MICRON       0x13
@@ -258,4 +259,9 @@ static inline int mmc_card_broken_hpi(const struct mmc_card *c)
 	return c->quirks & MMC_QUIRK_BROKEN_HPI;
 }
 
+static inline int mmc_card_broken_sd_discard(const struct mmc_card *c)
+{
+	return c->quirks & MMC_QUIRK_BROKEN_SD_DISCARD;
+}
+
 #endif

drivers/mmc/core/quirks.h

@@ -100,6 +100,12 @@ static const struct mmc_fixup __maybe_unused mmc_blk_fixups[] = {
 	MMC_FIXUP("V10016", CID_MANFID_KINGSTON, CID_OEMID_ANY, add_quirk_mmc,
 		  MMC_QUIRK_TRIM_BROKEN),
 
+	/*
+	 * Some SD cards reports discard support while they don't
+	 */
+	MMC_FIXUP(CID_NAME_ANY, CID_MANFID_SANDISK_SD, 0x5344, add_quirk_sd,
+		  MMC_QUIRK_BROKEN_SD_DISCARD),
+
 	END_FIXUP
 };
 

drivers/mmc/host/renesas_sdhi_core.c

@@ -128,6 +128,7 @@ static unsigned int renesas_sdhi_clk_update(struct tmio_mmc_host *host,
 	struct clk *ref_clk = priv->clk;
 	unsigned int freq, diff, best_freq = 0, diff_min = ~0;
 	unsigned int new_clock, clkh_shift = 0;
+	unsigned int new_upper_limit;
 	int i;
 
 	/*
@@ -153,13 +154,20 @@ static unsigned int renesas_sdhi_clk_update(struct tmio_mmc_host *host,
 	 * greater than, new_clock.  As we can divide by 1 << i for
 	 * any i in [0, 9] we want the input clock to be as close as
 	 * possible, but no greater than, new_clock << i.
+	 *
+	 * Add an upper limit of 1/1024 rate higher to the clock rate to fix
+	 * clk rate jumping to lower rate due to rounding error (eg: RZ/G2L has
+	 * 3 clk sources 533.333333 MHz, 400 MHz and 266.666666 MHz. The request
+	 * for 533.333333 MHz will selects a slower 400 MHz due to rounding
+	 * error (533333333 Hz / 4 * 4 = 533333332 Hz < 533333333 Hz)).
 	 */
 	for (i = min(9, ilog2(UINT_MAX / new_clock)); i >= 0; i--) {
 		freq = clk_round_rate(ref_clk, new_clock << i);
-		if (freq > (new_clock << i)) {
+		new_upper_limit = (new_clock << i) + ((new_clock << i) >> 10);
+		if (freq > new_upper_limit) {
 			/* Too fast; look for a slightly slower option */
 			freq = clk_round_rate(ref_clk, (new_clock << i) / 4 * 3);
-			if (freq > (new_clock << i))
+			if (freq > new_upper_limit)
 				continue;
 		}
 
@@ -181,6 +189,7 @@ static unsigned int renesas_sdhi_clk_update(struct tmio_mmc_host *host,
 static void renesas_sdhi_set_clock(struct tmio_mmc_host *host,
 				   unsigned int new_clock)
 {
+	unsigned int clk_margin;
 	u32 clk = 0, clock;
 
 	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~CLK_CTL_SCLKEN &
@@ -194,7 +203,13 @@ static void renesas_sdhi_set_clock(struct tmio_mmc_host *host,
 	host->mmc->actual_clock = renesas_sdhi_clk_update(host, new_clock);
 	clock = host->mmc->actual_clock / 512;
 
-	for (clk = 0x80000080; new_clock >= (clock << 1); clk >>= 1)
+	/*
+	 * Add a margin of 1/1024 rate higher to the clock rate in order
+	 * to avoid clk variable setting a value of 0 due to the margin
+	 * provided for actual_clock in renesas_sdhi_clk_update().
+	 */
+	clk_margin = new_clock >> 10;
+	for (clk = 0x80000080; new_clock + clk_margin >= (clock << 1); clk >>= 1)
 		clock <<= 1;
 
 	/* 1/1 clock is option */

drivers/mmc/host/sdhci-sprd.c

@@ -309,7 +309,7 @@ static unsigned int sdhci_sprd_get_max_clock(struct sdhci_host *host)
 
 static unsigned int sdhci_sprd_get_min_clock(struct sdhci_host *host)
 {
-	return 400000;
+	return 100000;
 }
 
 static void sdhci_sprd_set_uhs_signaling(struct sdhci_host *host,

drivers/mmc/host/sdhci-tegra.c

@@ -773,7 +773,7 @@ static void tegra_sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
 		dev_err(dev, "failed to set clk rate to %luHz: %d\n",
 			host_clk, err);
 
-	tegra_host->curr_clk_rate = host_clk;
+	tegra_host->curr_clk_rate = clk_get_rate(pltfm_host->clk);
 	if (tegra_host->ddr_signaling)
 		host->max_clk = host_clk;
 	else

include/linux/mmc/card.h

@@ -293,6 +293,7 @@ struct mmc_card {
 #define MMC_QUIRK_BROKEN_IRQ_POLLING	(1<<11)	/* Polling SDIO_CCCR_INTx could create a fake interrupt */
 #define MMC_QUIRK_TRIM_BROKEN	(1<<12)		/* Skip trim */
 #define MMC_QUIRK_BROKEN_HPI	(1<<13)		/* Disable broken HPI support */
+#define MMC_QUIRK_BROKEN_SD_DISCARD	(1<<14)	/* Disable broken SD discard support */
 
 	bool			reenable_cmdq;	/* Re-enable Command Queue */