Commit 0ad1fbc8 authored by eric miao's avatar eric miao Committed by Russell King

[ARM] pxa: remove un-used pxa3xx_mfp_set_xxx() functions

pxa3xx_mfp_set_xxx() functions are originally provided for overwriting
MFP configurations performed by pxa3xx_mfp_config(), the usage of such
a dirtry trick is not recommended, since there is currently no user of
these functions, they are safely removed
Signed-off-by: default avatareric miao <eric.miao@marvell.com>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 83b6759e
......@@ -96,117 +96,6 @@ void pxa3xx_mfp_write(int mfp, unsigned long val)
spin_unlock_irqrestore(&mfp_spin_lock, flags);
}
void pxa3xx_mfp_set_afds(int mfp, int af, int ds)
{
uint32_t mfpr_off, mfpr_val;
unsigned long flags;
BUG_ON(mfp >= MFP_PIN_MAX);
spin_lock_irqsave(&mfp_spin_lock, flags);
mfpr_off = mfp_table[mfp].mfpr_off;
mfpr_val = mfpr_readl(mfpr_off);
mfpr_val &= ~(MFPR_AF_MASK | MFPR_DRV_MASK);
mfpr_val |= (((af & 0x7) << MFPR_ALT_OFFSET) |
((ds & 0x7) << MFPR_DRV_OFFSET));
mfpr_writel(mfpr_off, mfpr_val);
mfpr_sync();
spin_unlock_irqrestore(&mfp_spin_lock, flags);
}
void pxa3xx_mfp_set_rdh(int mfp, int rdh)
{
uint32_t mfpr_off, mfpr_val;
unsigned long flags;
BUG_ON(mfp >= MFP_PIN_MAX);
spin_lock_irqsave(&mfp_spin_lock, flags);
mfpr_off = mfp_table[mfp].mfpr_off;
mfpr_val = mfpr_readl(mfpr_off);
mfpr_val &= ~MFPR_RDH_MASK;
if (likely(rdh))
mfpr_val |= (1u << MFPR_SS_OFFSET);
mfpr_writel(mfpr_off, mfpr_val);
mfpr_sync();
spin_unlock_irqrestore(&mfp_spin_lock, flags);
}
void pxa3xx_mfp_set_lpm(int mfp, int lpm)
{
uint32_t mfpr_off, mfpr_val;
unsigned long flags;
BUG_ON(mfp >= MFP_PIN_MAX);
spin_lock_irqsave(&mfp_spin_lock, flags);
mfpr_off = mfp_table[mfp].mfpr_off;
mfpr_val = mfpr_readl(mfpr_off);
mfpr_val &= ~MFPR_LPM_MASK;
if (lpm & 0x1) mfpr_val |= 1u << MFPR_SON_OFFSET;
if (lpm & 0x2) mfpr_val |= 1u << MFPR_SD_OFFSET;
if (lpm & 0x4) mfpr_val |= 1u << MFPR_PU_OFFSET;
if (lpm & 0x8) mfpr_val |= 1u << MFPR_PD_OFFSET;
if (lpm &0x10) mfpr_val |= 1u << MFPR_PS_OFFSET;
mfpr_writel(mfpr_off, mfpr_val);
mfpr_sync();
spin_unlock_irqrestore(&mfp_spin_lock, flags);
}
void pxa3xx_mfp_set_pull(int mfp, int pull)
{
uint32_t mfpr_off, mfpr_val;
unsigned long flags;
BUG_ON(mfp >= MFP_PIN_MAX);
spin_lock_irqsave(&mfp_spin_lock, flags);
mfpr_off = mfp_table[mfp].mfpr_off;
mfpr_val = mfpr_readl(mfpr_off);
mfpr_val &= ~MFPR_PULL_MASK;
mfpr_val |= ((pull & 0x7u) << MFPR_PD_OFFSET);
mfpr_writel(mfpr_off, mfpr_val);
mfpr_sync();
spin_unlock_irqrestore(&mfp_spin_lock, flags);
}
void pxa3xx_mfp_set_edge(int mfp, int edge)
{
uint32_t mfpr_off, mfpr_val;
unsigned long flags;
BUG_ON(mfp >= MFP_PIN_MAX);
spin_lock_irqsave(&mfp_spin_lock, flags);
mfpr_off = mfp_table[mfp].mfpr_off;
mfpr_val = mfpr_readl(mfpr_off);
mfpr_val &= ~MFPR_EDGE_MASK;
mfpr_val |= (edge & 0x3u) << MFPR_ERE_OFFSET;
mfpr_val |= (!edge & 0x1) << MFPR_EC_OFFSET;
mfpr_writel(mfpr_off, mfpr_val);
mfpr_sync();
spin_unlock_irqrestore(&mfp_spin_lock, flags);
}
void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *map)
{
struct pxa3xx_mfp_addr_map *p;
......
......@@ -418,20 +418,6 @@ struct pxa3xx_mfp_pin {
unsigned long pxa3xx_mfp_read(int mfp);
void pxa3xx_mfp_write(int mfp, unsigned long mfpr_val);
/*
* pxa3xx_mfp_set_afds - set MFP alternate function and drive strength
* pxa3xx_mfp_set_rdh - set MFP release delay hold on/off
* pxa3xx_mfp_set_lpm - set MFP low power mode state
* pxa3xx_mfp_set_edge - set MFP edge detection in low power mode
*
* use these functions to override/change the default configuration
* done by pxa3xx_mfp_set_config(s)
*/
void pxa3xx_mfp_set_afds(int mfp, int af, int ds);
void pxa3xx_mfp_set_rdh(int mfp, int rdh);
void pxa3xx_mfp_set_lpm(int mfp, int lpm);
void pxa3xx_mfp_set_edge(int mfp, int edge);
/*
* pxa3xx_mfp_config - configure the MFPR registers
*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment