arm64: dts: ti: k3-am6*: Fix bus-width property in MMC nodes

Move bus-width property to *main.dtsi, above the OTAP/ITAP
delay values. While there is no error with where it is
currently at, it is easier to read the MMC node if the
bus-width property is located above the OTAP/ITAP delay
values consistently across MMC nodes.

Add missing bus-width for MMC2 in k3-am62-main.
Signed-off-by: Judith Mendez <jm@ti.com>
Tested-by: Wadim Egorov <w.egorov@phytec.de>
Link: https://lore.kernel.org/r/20240213235701.2438513-9-jm@ti.comSigned-off-by: Vignesh Raghavendra <vigneshr@ti.com>

arch/arm64/boot/dts/ti/k3-am62-main.dtsi

@@ -558,9 +558,9 @@ sdhci0: mmc@fa10000 {
 		clock-names = "clk_ahb", "clk_xin";
 		assigned-clocks = <&k3_clks 57 6>;
 		assigned-clock-parents = <&k3_clks 57 8>;
+		bus-width = <8>;
 		mmc-ddr-1_8v;
 		mmc-hs200-1_8v;
-		bus-width = <8>;
 		ti,clkbuf-sel = <0x7>;
 		ti,otap-del-sel-legacy = <0x0>;
 		ti,otap-del-sel-mmc-hs = <0x0>;
@@ -578,6 +578,7 @@ sdhci1: mmc@fa00000 {
 		power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
 		clock-names = "clk_ahb", "clk_xin";
+		bus-width = <4>;
 		ti,clkbuf-sel = <0x7>;
 		ti,otap-del-sel-legacy = <0x8>;
 		ti,otap-del-sel-sd-hs = <0x0>;
@@ -590,7 +591,6 @@ sdhci1: mmc@fa00000 {
 		ti,itap-del-sel-sd-hs = <0x1>;
 		ti,itap-del-sel-sdr12 = <0xa>;
 		ti,itap-del-sel-sdr25 = <0x1>;
-		bus-width = <4>;
 		status = "disabled";
 	};
 
@@ -601,6 +601,7 @@ sdhci2: mmc@fa20000 {
 		power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 184 5>, <&k3_clks 184 6>;
 		clock-names = "clk_ahb", "clk_xin";
+		bus-width = <4>;
 		ti,clkbuf-sel = <0x7>;
 		ti,otap-del-sel-legacy = <0x8>;
 		ti,otap-del-sel-sd-hs = <0x0>;

arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts

@@ -842,7 +842,6 @@ &sdhci2 {
 	vmmc-supply = <&wlan_en>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&wifi_pins_default>, <&wifi_32k_clk>;
-	bus-width = <4>;
 	non-removable;
 	ti,fails-without-test-cd;
 	cap-power-off-card;

arch/arm64/boot/dts/ti/k3-am62a-main.dtsi

@@ -560,6 +560,7 @@ sdhci1: mmc@fa00000 {
 		power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
 		clock-names = "clk_ahb", "clk_xin";
+		bus-width = <4>;
 		ti,clkbuf-sel = <0x7>;
 		ti,otap-del-sel-legacy = <0x0>;
 		ti,otap-del-sel-sd-hs = <0x0>;
@@ -572,7 +573,6 @@ sdhci1: mmc@fa00000 {
 		ti,itap-del-sel-sd-hs = <0x0>;
 		ti,itap-del-sel-sdr12 = <0x0>;
 		ti,itap-del-sel-sdr25 = <0x0>;
-		bus-width = <4>;
 		no-1-8-v;
 		status = "disabled";
 	};

arch/arm64/boot/dts/ti/k3-am64-main.dtsi

@@ -627,6 +627,7 @@ sdhci0: mmc@fa10000 {
 		power-domains = <&k3_pds 57 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 57 0>, <&k3_clks 57 1>;
 		clock-names = "clk_ahb", "clk_xin";
+		bus-width = <8>;
 		mmc-ddr-1_8v;
 		mmc-hs200-1_8v;
 		ti,clkbuf-sel = <0x7>;
@@ -648,6 +649,7 @@ sdhci1: mmc@fa00000 {
 		power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 58 3>, <&k3_clks 58 4>;
 		clock-names = "clk_ahb", "clk_xin";
+		bus-width = <4>;
 		ti,clkbuf-sel = <0x7>;
 		ti,otap-del-sel-legacy = <0x0>;
 		ti,otap-del-sel-sd-hs = <0x0>;

arch/arm64/boot/dts/ti/k3-am642-evm.dts

@@ -494,7 +494,6 @@ eeprom@0 {
 /* eMMC */
 &sdhci0 {
 	status = "okay";
-	bus-width = <8>;
 	non-removable;
 	ti,driver-strength-ohm = <50>;
 	disable-wp;
@@ -506,7 +505,6 @@ &sdhci1 {
 	status = "okay";
 	vmmc-supply = <&vdd_mmc1>;
 	pinctrl-names = "default";
-	bus-width = <4>;
 	pinctrl-0 = <&main_mmc1_pins_default>;
 	disable-wp;
 };

arch/arm64/boot/dts/ti/k3-am642-sk.dts

@@ -469,7 +469,6 @@ &sdhci1 {
 	status = "okay";
 	vmmc-supply = <&vdd_mmc1>;
 	pinctrl-names = "default";
-	bus-width = <4>;
 	pinctrl-0 = <&main_mmc1_pins_default>;
 	disable-wp;
 };