irqchip/gic-v3: Use SGIs without active state if offered

To allow the direct injection of SGIs into a guest, the GICv4.1
architecture has to sacrifice the Active state so that SGIs look
a lot like LPIs (they are injected by the same mechanism).

In order not to break existing software, the architecture gives
offers guests OSs the choice: SGIs with or without an active
state. It is the hypervisors duty to honor the guest's choice.

For this, the architecture offers a discovery bit indicating whether
the GIC supports GICv4.1 SGIs (GICD_TYPER2.nASSGIcap), and another
bit indicating whether the guest wants Active-less SGIs or not
(controlled by GICD_CTLR.nASSGIreq).

A hypervisor not supporting GICv4.1 SGIs would leave nASSGIcap
clear, and a guest not knowing about GICv4.1 SGIs (or definitely
wanting an Active state) would leave nASSGIreq clear (both being
thankfully backward compatible with older revisions of the GIC).

Since Linux is perfectly happy without an active state on SGIs,
inform the hypervisor that we'll use that if offered.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-2-maz@kernel.org

drivers/irqchip/irq-gic-v3.c

@@ -723,6 +723,7 @@ static void __init gic_dist_init(void)
 	unsigned int i;
 	u64 affinity;
 	void __iomem *base = gic_data.dist_base;
+	u32 val;
 
 	/* Disable the distributor */
 	writel_relaxed(0, base + GICD_CTLR);
@@ -755,9 +756,14 @@ static void __init gic_dist_init(void)
 	/* Now do the common stuff, and wait for the distributor to drain */
 	gic_dist_config(base, GIC_LINE_NR, gic_dist_wait_for_rwp);
 
+	val = GICD_CTLR_ARE_NS | GICD_CTLR_ENABLE_G1A | GICD_CTLR_ENABLE_G1;
+	if (gic_data.rdists.gicd_typer2 & GICD_TYPER2_nASSGIcap) {
+		pr_info("Enabling SGIs without active state\n");
+		val |= GICD_CTLR_nASSGIreq;
+	}
+
 	/* Enable distributor with ARE, Group1 */
-	writel_relaxed(GICD_CTLR_ARE_NS | GICD_CTLR_ENABLE_G1A | GICD_CTLR_ENABLE_G1,
-		       base + GICD_CTLR);
+	writel_relaxed(val, base + GICD_CTLR);
 
 	/*
 	 * Set all global interrupts to the boot CPU only. ARE must be

include/linux/irqchip/arm-gic-v3.h

@@ -57,6 +57,7 @@
 #define GICD_SPENDSGIR			0x0F20
 
 #define GICD_CTLR_RWP			(1U << 31)
+#define GICD_CTLR_nASSGIreq		(1U << 8)
 #define GICD_CTLR_DS			(1U << 6)
 #define GICD_CTLR_ARE_NS		(1U << 4)
 #define GICD_CTLR_ENABLE_G1A		(1U << 1)
@@ -90,6 +91,7 @@
 #define GICD_TYPER_ESPIS(typer)						\
 	(((typer) & GICD_TYPER_ESPI) ? GICD_TYPER_SPIS((typer) >> 27) : 0)
 
+#define GICD_TYPER2_nASSGIcap		(1U << 8)
 #define GICD_TYPER2_VIL			(1U << 7)
 #define GICD_TYPER2_VID			GENMASK(4, 0)