Merge tag 'hip04-dt-for-4.2' of git://github.com/hisilicon/linux-hisi into next/dt

Merge "ARM: DT: Hisilicon hip04 soc and D01 board updates for 4.2" from Wei Xu:

- Add hip04 GPIO nodes
- Add NANDC nodes for hip04 and D01 board
- Add hip04 ethernet related nodes

* tag 'hip04-dt-for-4.2' of git://github.com/hisilicon/linux-hisi:
  ARM: dts: add HiSilicon hip04 ethernet controller resource
  mtd: hisilicon: add device tree node for NAND controller
  ARM: dts: hip04: add GPIO pieces

arch/arm/boot/dts/hip04-d01.dts

@@ -28,5 +28,32 @@ soc {
 		uart0: uart@4007000 {
 			status = "ok";
 		};
+
+		nand: nand@4020000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <16>;
+			nand-ecc-step-size = <1024>;
+
+			partition@0 {
+				label = "nand_text";
+				reg = <0x00000000 0x00400000>;
+			};
+
+			partition@00400000 {
+				label = "nand_monitor";
+				reg = <0x00400000 0x00400000>;
+			};
+
+			partition@00800000 {
+				label = "nand_kernel";
+				reg = <0x00800000 0x00800000>;
+			};
+
+			partition@01000000 {
+				label = "nand_fs";
+				reg = <0x01000000 0x1f000000>;
+			};
+		};
 	};
 };

arch/arm/boot/dts/hip04.dtsi

@@ -269,6 +269,139 @@ sata0: sata@a000000 {
 			interrupts = <0 372 4>;
 		};
 
+		gpio@4003000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x4003000 0x1000>;
+
+			gpio3: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <32>;
+				reg = <0>;
+				interrupt-parent = <&gic>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 392 4>;
+			};
+		};
+
+		gpio@4002000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x4002000 0x1000>;
+
+			gpio2: gpio-controller@0 {
+			compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <32>;
+				reg = <0>;
+				interrupt-parent = <&gic>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 391 4>;
+			};
+		};
+
+		gpio@4001000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x4001000 0x1000>;
+
+			gpio1: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <32>;
+				reg = <0>;
+				interrupt-parent = <&gic>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 390 4>;
+			};
+		};
+
+		gpio@4000000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x4000000 0x1000>;
+
+			gpio0: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <32>;
+				reg = <0>;
+				interrupt-parent = <&gic>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <0 389 4>;
+			};
+		};
+
+		nand: nand@4020000 {
+			compatible = "hisilicon,504-nfc";
+			reg = <0x4020000 0x10000>, <0x5000000 0x1000>;
+			interrupts = <0 379 4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		mdio {
+			compatible = "hisilicon,hip04-mdio";
+			reg = <0x28f1000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy0: ethernet-phy@0 {
+				compatible = "ethernet-phy-ieee802.3-c22";
+				reg = <0>;
+				marvell,reg-init = <18 0x14 0 0x8001>;
+			};
+
+			phy1: ethernet-phy@1 {
+				compatible = "ethernet-phy-ieee802.3-c22";
+				reg = <1>;
+				marvell,reg-init = <18 0x14 0 0x8001>;
+			};
+		};
+
+		ppe: ppe@28c0000 {
+			compatible = "hisilicon,hip04-ppe", "syscon";
+			reg = <0x28c0000 0x10000>;
+		};
+
+		fe: ethernet@28b0000 {
+			compatible = "hisilicon,hip04-mac";
+			reg = <0x28b0000 0x10000>;
+			interrupts = <0 413 4>;
+			phy-mode = "mii";
+			port-handle = <&ppe 31 0>;
+		};
+
+		ge0: ethernet@2800000 {
+			compatible = "hisilicon,hip04-mac";
+			reg = <0x2800000 0x10000>;
+			interrupts = <0 402 4>;
+			phy-mode = "sgmii";
+			port-handle = <&ppe 0 1>;
+			phy-handle = <&phy0>;
+		};
+
+		ge8: ethernet@2880000 {
+			compatible = "hisilicon,hip04-mac";
+			reg = <0x2880000 0x10000>;
+			interrupts = <0 410 4>;
+			phy-mode = "sgmii";
+			port-handle = <&ppe 8 2>;
+			phy-handle = <&phy1>;
+		};
 	};
 
 	etb@0,e3c42000 {