Commit 0b7fde54 authored by Ivo van Doorn's avatar Ivo van Doorn Committed by John W. Linville

rt2x00: Protect queue control with mutex

Add wrapper functions in rt2x00queue.c to
start & stop queues. This control must be protected
using a mutex.

Queues can also be paused which will halt the flow
of packets between the driver and mac80211. This doesn't
require a mutex protection.
Signed-off-by: default avatarIvo van Doorn <IvDoorn@gmail.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent dbba306f
......@@ -1073,6 +1073,58 @@ struct data_queue *rt2x00queue_get_queue(struct rt2x00_dev *rt2x00dev,
struct queue_entry *rt2x00queue_get_entry(struct data_queue *queue,
enum queue_index index);
/**
* rt2x00queue_pause_queue - Pause a data queue
* @queue: Pointer to &struct data_queue.
*
* This function will pause the data queue locally, preventing
* new frames to be added to the queue (while the hardware is
* still allowed to run).
*/
void rt2x00queue_pause_queue(struct data_queue *queue);
/**
* rt2x00queue_unpause_queue - unpause a data queue
* @queue: Pointer to &struct data_queue.
*
* This function will unpause the data queue locally, allowing
* new frames to be added to the queue again.
*/
void rt2x00queue_unpause_queue(struct data_queue *queue);
/**
* rt2x00queue_start_queue - Start a data queue
* @queue: Pointer to &struct data_queue.
*
* This function will start handling all pending frames in the queue.
*/
void rt2x00queue_start_queue(struct data_queue *queue);
/**
* rt2x00queue_stop_queue - Halt a data queue
* @queue: Pointer to &struct data_queue.
*
* This function will stop all pending frames in the queue.
*/
void rt2x00queue_stop_queue(struct data_queue *queue);
/**
* rt2x00queue_start_queues - Start all data queues
* @rt2x00dev: Pointer to &struct rt2x00_dev.
*
* This function will loop through all available queues to start them
*/
void rt2x00queue_start_queues(struct rt2x00_dev *rt2x00dev);
/**
* rt2x00queue_stop_queues - Halt all data queues
* @rt2x00dev: Pointer to &struct rt2x00_dev.
*
* This function will loop through all available queues to stop
* any pending frames.
*/
void rt2x00queue_stop_queues(struct rt2x00_dev *rt2x00dev);
/*
* Debugfs handlers.
*/
......
......@@ -146,7 +146,7 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
* else the changes will be ignored by the device.
*/
if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
rt2x00dev->ops->lib->stop_queue(rt2x00dev->rx);
rt2x00queue_stop_queue(rt2x00dev->rx);
/*
* Write new antenna setup to device and reset the link tuner.
......@@ -160,7 +160,7 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
memcpy(active, &config, sizeof(config));
if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
rt2x00dev->ops->lib->start_queue(rt2x00dev->rx);
rt2x00queue_start_queue(rt2x00dev->rx);
}
void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
......
......@@ -339,12 +339,13 @@ static ssize_t rt2x00debug_read_queue_stats(struct file *file,
return -ENOMEM;
temp = data +
sprintf(data, "qid\tcount\tlimit\tlength\tindex\tdma done\tdone\n");
sprintf(data, "qid\tflags\t\tcount\tlimit\tlength\tindex\tdma done\tdone\n");
queue_for_each(intf->rt2x00dev, queue) {
spin_lock_irqsave(&queue->index_lock, irqflags);
temp += sprintf(temp, "%d\t%d\t%d\t%d\t%d\t%d\t%d\n", queue->qid,
temp += sprintf(temp, "%d\t0x%.8x\t%d\t%d\t%d\t%d\t%d\t\t%d\n",
queue->qid, (unsigned int)queue->flags,
queue->count, queue->limit, queue->length,
queue->index[Q_INDEX],
queue->index[Q_INDEX_DMA_DONE],
......
......@@ -66,9 +66,9 @@ int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev)
set_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags);
/*
* Enable RX.
* Enable queues.
*/
rt2x00dev->ops->lib->start_queue(rt2x00dev->rx);
rt2x00queue_start_queues(rt2x00dev);
rt2x00link_start_tuner(rt2x00dev);
/*
......@@ -76,11 +76,6 @@ int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev)
*/
rt2x00link_start_watchdog(rt2x00dev);
/*
* Start the TX queues.
*/
ieee80211_wake_queues(rt2x00dev->hw);
return 0;
}
......@@ -89,22 +84,16 @@ void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev)
if (!test_and_clear_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
return;
/*
* Stop the TX queues in mac80211.
*/
ieee80211_stop_queues(rt2x00dev->hw);
rt2x00queue_stop_queues(rt2x00dev);
/*
* Stop watchdog monitoring.
*/
rt2x00link_stop_watchdog(rt2x00dev);
/*
* Disable RX.
* Stop all queues
*/
rt2x00link_stop_tuner(rt2x00dev);
rt2x00dev->ops->lib->stop_queue(rt2x00dev->rx);
rt2x00queue_stop_queues(rt2x00dev);
/*
* Disable radio.
......@@ -249,7 +238,6 @@ void rt2x00lib_txdone(struct queue_entry *entry,
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
enum data_queue_qid qid = skb_get_queue_mapping(entry->skb);
unsigned int header_length, i;
u8 rate_idx, rate_flags, retry_rates;
u8 skbdesc_flags = skbdesc->flags;
......@@ -403,7 +391,7 @@ void rt2x00lib_txdone(struct queue_entry *entry,
* is reenabled when the txdone handler has finished.
*/
if (!rt2x00queue_threshold(entry->queue))
ieee80211_wake_queue(rt2x00dev->hw, qid);
rt2x00queue_unpause_queue(entry->queue);
}
EXPORT_SYMBOL_GPL(rt2x00lib_txdone);
......
......@@ -177,15 +177,6 @@ int rt2x00queue_update_beacon(struct rt2x00_dev *rt2x00dev,
*/
void rt2x00queue_index_inc(struct data_queue *queue, enum queue_index index);
/**
* rt2x00queue_stop_queues - Halt all data queues
* @rt2x00dev: Pointer to &struct rt2x00_dev.
*
* This function will loop through all available queues to stop
* any pending outgoing frames.
*/
void rt2x00queue_stop_queues(struct rt2x00_dev *rt2x00dev);
/**
* rt2x00queue_init_queues - Initialize all data queues
* @rt2x00dev: Pointer to &struct rt2x00_dev.
......
......@@ -104,7 +104,7 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
struct rt2x00_dev *rt2x00dev = hw->priv;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
enum data_queue_qid qid = skb_get_queue_mapping(skb);
struct data_queue *queue;
struct data_queue *queue = NULL;
/*
* Mac80211 might be calling this function while we are trying
......@@ -153,7 +153,7 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
goto exit_fail;
if (rt2x00queue_threshold(queue))
ieee80211_stop_queue(rt2x00dev->hw, qid);
rt2x00queue_pause_queue(queue);
return NETDEV_TX_OK;
......@@ -352,7 +352,7 @@ int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed)
* if for any reason the link tuner must be reset, this will be
* handled by rt2x00lib_config().
*/
rt2x00dev->ops->lib->stop_queue(rt2x00dev->rx);
rt2x00queue_stop_queue(rt2x00dev->rx);
/*
* When we've just turned on the radio, we want to reprogram
......@@ -370,7 +370,7 @@ int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed)
rt2x00lib_config_antenna(rt2x00dev, rt2x00dev->default_ant);
/* Turn RX back on */
rt2x00dev->ops->lib->start_queue(rt2x00dev->rx);
rt2x00queue_start_queue(rt2x00dev->rx);
return 0;
}
......
......@@ -585,7 +585,7 @@ int rt2x00queue_update_beacon(struct rt2x00_dev *rt2x00dev,
rt2x00queue_free_skb(intf->beacon);
if (!enable_beacon) {
rt2x00dev->ops->lib->stop_queue(intf->beacon->queue);
rt2x00queue_stop_queue(intf->beacon->queue);
mutex_unlock(&intf->beacon_skb_mutex);
return 0;
}
......@@ -738,6 +738,125 @@ void rt2x00queue_index_inc(struct data_queue *queue, enum queue_index index)
spin_unlock_irqrestore(&queue->index_lock, irqflags);
}
void rt2x00queue_pause_queue(struct data_queue *queue)
{
if (!test_bit(DEVICE_STATE_PRESENT, &queue->rt2x00dev->flags) ||
!test_bit(QUEUE_STARTED, &queue->flags) ||
test_and_set_bit(QUEUE_PAUSED, &queue->flags))
return;
switch (queue->qid) {
case QID_AC_BE:
case QID_AC_BK:
case QID_AC_VI:
case QID_AC_VO:
/*
* For TX queues, we have to disable the queue
* inside mac80211.
*/
ieee80211_stop_queue(queue->rt2x00dev->hw, queue->qid);
break;
default:
break;
}
}
EXPORT_SYMBOL_GPL(rt2x00queue_pause_queue);
void rt2x00queue_unpause_queue(struct data_queue *queue)
{
if (!test_bit(DEVICE_STATE_PRESENT, &queue->rt2x00dev->flags) ||
!test_bit(QUEUE_STARTED, &queue->flags) ||
!test_and_clear_bit(QUEUE_PAUSED, &queue->flags))
return;
switch (queue->qid) {
case QID_AC_BE:
case QID_AC_BK:
case QID_AC_VI:
case QID_AC_VO:
/*
* For TX queues, we have to enable the queue
* inside mac80211.
*/
ieee80211_wake_queue(queue->rt2x00dev->hw, queue->qid);
break;
default:
break;
}
}
EXPORT_SYMBOL_GPL(rt2x00queue_unpause_queue);
void rt2x00queue_start_queue(struct data_queue *queue)
{
mutex_lock(&queue->status_lock);
if (!test_bit(DEVICE_STATE_PRESENT, &queue->rt2x00dev->flags) ||
test_and_set_bit(QUEUE_STARTED, &queue->flags)) {
mutex_unlock(&queue->status_lock);
return;
}
set_bit(QUEUE_PAUSED, &queue->flags);
queue->rt2x00dev->ops->lib->start_queue(queue);
rt2x00queue_unpause_queue(queue);
mutex_unlock(&queue->status_lock);
}
EXPORT_SYMBOL_GPL(rt2x00queue_start_queue);
void rt2x00queue_stop_queue(struct data_queue *queue)
{
mutex_lock(&queue->status_lock);
if (!test_and_clear_bit(QUEUE_STARTED, &queue->flags)) {
mutex_unlock(&queue->status_lock);
return;
}
rt2x00queue_pause_queue(queue);
queue->rt2x00dev->ops->lib->stop_queue(queue);
mutex_unlock(&queue->status_lock);
}
EXPORT_SYMBOL_GPL(rt2x00queue_stop_queue);
void rt2x00queue_start_queues(struct rt2x00_dev *rt2x00dev)
{
struct data_queue *queue;
/*
* rt2x00queue_start_queue will call ieee80211_wake_queue
* for each queue after is has been properly initialized.
*/
tx_queue_for_each(rt2x00dev, queue)
rt2x00queue_start_queue(queue);
rt2x00queue_start_queue(rt2x00dev->rx);
}
EXPORT_SYMBOL_GPL(rt2x00queue_start_queues);
void rt2x00queue_stop_queues(struct rt2x00_dev *rt2x00dev)
{
struct data_queue *queue;
/*
* rt2x00queue_stop_queue will call ieee80211_stop_queue
* as well, but we are completely shutting doing everything
* now, so it is much safer to stop all TX queues at once,
* and use rt2x00queue_stop_queue for cleaning up.
*/
ieee80211_stop_queues(rt2x00dev->hw);
tx_queue_for_each(rt2x00dev, queue)
rt2x00queue_stop_queue(queue);
rt2x00queue_stop_queue(rt2x00dev->rx);
}
EXPORT_SYMBOL_GPL(rt2x00queue_stop_queues);
static void rt2x00queue_reset(struct data_queue *queue)
{
unsigned long irqflags;
......@@ -756,14 +875,6 @@ static void rt2x00queue_reset(struct data_queue *queue)
spin_unlock_irqrestore(&queue->index_lock, irqflags);
}
void rt2x00queue_stop_queues(struct rt2x00_dev *rt2x00dev)
{
struct data_queue *queue;
txall_queue_for_each(rt2x00dev, queue)
rt2x00dev->ops->lib->stop_queue(queue);
}
void rt2x00queue_init_queues(struct rt2x00_dev *rt2x00dev)
{
struct data_queue *queue;
......@@ -905,6 +1016,7 @@ void rt2x00queue_uninitialize(struct rt2x00_dev *rt2x00dev)
static void rt2x00queue_init(struct rt2x00_dev *rt2x00dev,
struct data_queue *queue, enum data_queue_qid qid)
{
mutex_init(&queue->status_lock);
spin_lock_init(&queue->index_lock);
queue->rt2x00dev = rt2x00dev;
......
......@@ -391,6 +391,23 @@ enum queue_index {
Q_INDEX_MAX,
};
/**
* enum data_queue_flags: Status flags for data queues
*
* @QUEUE_STARTED: The queue has been started. Fox RX queues this means the
* device might be DMA'ing skbuffers. TX queues will accept skbuffers to
* be transmitted and beacon queues will start beaconing the configured
* beacons.
* @QUEUE_PAUSED: The queue has been started but is currently paused.
* When this bit is set, the queue has been stopped in mac80211,
* preventing new frames to be enqueued. However, a few frames
* might still appear shortly after the pausing...
*/
enum data_queue_flags {
QUEUE_STARTED,
QUEUE_PAUSED,
};
/**
* struct data_queue: Data queue
*
......@@ -398,6 +415,9 @@ enum queue_index {
* @entries: Base address of the &struct queue_entry which are
* part of this queue.
* @qid: The queue identification, see &enum data_queue_qid.
* @flags: Entry flags, see &enum queue_entry_flags.
* @status_lock: The mutex for protecting the start/stop/flush
* handling on this queue.
* @index_lock: Spinlock to protect index handling. Whenever @index, @index_done or
* @index_crypt needs to be changed this lock should be grabbed to prevent
* index corruption due to concurrency.
......@@ -421,8 +441,11 @@ struct data_queue {
struct queue_entry *entries;
enum data_queue_qid qid;
unsigned long flags;
struct mutex status_lock;
spinlock_t index_lock;
unsigned int count;
unsigned short limit;
unsigned short threshold;
......
......@@ -261,6 +261,89 @@ static void rt2x00usb_kick_tx_entry(struct queue_entry *entry)
}
}
/*
* RX data handlers.
*/
static void rt2x00usb_work_rxdone(struct work_struct *work)
{
struct rt2x00_dev *rt2x00dev =
container_of(work, struct rt2x00_dev, rxdone_work);
struct queue_entry *entry;
struct skb_frame_desc *skbdesc;
u8 rxd[32];
while (!rt2x00queue_empty(rt2x00dev->rx)) {
entry = rt2x00queue_get_entry(rt2x00dev->rx, Q_INDEX_DONE);
if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
break;
/*
* Fill in desc fields of the skb descriptor
*/
skbdesc = get_skb_frame_desc(entry->skb);
skbdesc->desc = rxd;
skbdesc->desc_len = entry->queue->desc_size;
/*
* Send the frame to rt2x00lib for further processing.
*/
rt2x00lib_rxdone(entry);
}
}
static void rt2x00usb_interrupt_rxdone(struct urb *urb)
{
struct queue_entry *entry = (struct queue_entry *)urb->context;
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
if (!test_and_clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
return;
/*
* Report the frame as DMA done
*/
rt2x00lib_dmadone(entry);
/*
* Check if the received data is simply too small
* to be actually valid, or if the urb is signaling
* a problem.
*/
if (urb->actual_length < entry->queue->desc_size || urb->status)
set_bit(ENTRY_DATA_IO_FAILED, &entry->flags);
/*
* Schedule the delayed work for reading the RX status
* from the device.
*/
ieee80211_queue_work(rt2x00dev->hw, &rt2x00dev->rxdone_work);
}
static void rt2x00usb_kick_rx_entry(struct queue_entry *entry)
{
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev);
struct queue_entry_priv_usb *entry_priv = entry->priv_data;
int status;
if (test_and_set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
return;
usb_fill_bulk_urb(entry_priv->urb, usb_dev,
usb_rcvbulkpipe(usb_dev, entry->queue->usb_endpoint),
entry->skb->data, entry->skb->len,
rt2x00usb_interrupt_rxdone, entry);
status = usb_submit_urb(entry_priv->urb, GFP_ATOMIC);
if (status) {
if (status == -ENODEV)
clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
set_bit(ENTRY_DATA_IO_FAILED, &entry->flags);
rt2x00lib_dmadone(entry);
}
}
void rt2x00usb_kick_queue(struct data_queue *queue)
{
switch (queue->qid) {
......@@ -272,6 +355,11 @@ void rt2x00usb_kick_queue(struct data_queue *queue)
rt2x00queue_for_each_entry(queue, Q_INDEX_DONE, Q_INDEX,
rt2x00usb_kick_tx_entry);
break;
case QID_RX:
if (!rt2x00queue_full(queue))
rt2x00queue_for_each_entry(queue, Q_INDEX_DONE, Q_INDEX,
rt2x00usb_kick_rx_entry);
break;
default:
break;
}
......@@ -307,7 +395,6 @@ EXPORT_SYMBOL_GPL(rt2x00usb_stop_queue);
static void rt2x00usb_watchdog_tx_dma(struct data_queue *queue)
{
struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
unsigned short threshold = queue->threshold;
WARNING(queue->rt2x00dev, "TX queue %d DMA timed out,"
" invoke forced forced reset\n", queue->qid);
......@@ -315,18 +402,8 @@ static void rt2x00usb_watchdog_tx_dma(struct data_queue *queue)
/*
* Temporarily disable the TX queue, this will force mac80211
* to use the other queues until this queue has been restored.
*
* Set the queue threshold to the queue limit. This prevents the
* queue from being enabled during the txdone handler.
*/
queue->threshold = queue->limit;
ieee80211_stop_queue(rt2x00dev->hw, queue->qid);
/*
* Kill all entries in the queue, afterwards we need to
* wait a bit for all URBs to be cancelled.
*/
rt2x00usb_stop_queue(queue);
rt2x00queue_stop_queue(queue);
/*
* In case that a driver has overriden the txdone_work
......@@ -338,8 +415,7 @@ static void rt2x00usb_watchdog_tx_dma(struct data_queue *queue)
* The queue has been reset, and mac80211 is allowed to use the
* queue again.
*/
queue->threshold = threshold;
ieee80211_wake_queue(rt2x00dev->hw, queue->qid);
rt2x00queue_start_queue(queue);
}
static void rt2x00usb_watchdog_tx_status(struct data_queue *queue)
......@@ -365,65 +441,6 @@ void rt2x00usb_watchdog(struct rt2x00_dev *rt2x00dev)
}
EXPORT_SYMBOL_GPL(rt2x00usb_watchdog);
/*
* RX data handlers.
*/
static void rt2x00usb_work_rxdone(struct work_struct *work)
{
struct rt2x00_dev *rt2x00dev =
container_of(work, struct rt2x00_dev, rxdone_work);
struct queue_entry *entry;
struct skb_frame_desc *skbdesc;
u8 rxd[32];
while (!rt2x00queue_empty(rt2x00dev->rx)) {
entry = rt2x00queue_get_entry(rt2x00dev->rx, Q_INDEX_DONE);
if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
break;
/*
* Fill in desc fields of the skb descriptor
*/
skbdesc = get_skb_frame_desc(entry->skb);
skbdesc->desc = rxd;
skbdesc->desc_len = entry->queue->desc_size;
/*
* Send the frame to rt2x00lib for further processing.
*/
rt2x00lib_rxdone(entry);
}
}
static void rt2x00usb_interrupt_rxdone(struct urb *urb)
{
struct queue_entry *entry = (struct queue_entry *)urb->context;
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
if (!test_and_clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
return;
/*
* Report the frame as DMA done
*/
rt2x00lib_dmadone(entry);
/*
* Check if the received data is simply too small
* to be actually valid, or if the urb is signaling
* a problem.
*/
if (urb->actual_length < entry->queue->desc_size || urb->status)
set_bit(ENTRY_DATA_IO_FAILED, &entry->flags);
/*
* Schedule the delayed work for reading the RX status
* from the device.
*/
ieee80211_queue_work(rt2x00dev->hw, &rt2x00dev->rxdone_work);
}
/*
* Radio handlers
*/
......@@ -431,8 +448,6 @@ void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev)
{
rt2x00usb_vendor_request_sw(rt2x00dev, USB_RX_CONTROL, 0, 0,
REGISTER_TIMEOUT);
rt2x00dev->ops->lib->stop_queue(rt2x00dev->rx);
}
EXPORT_SYMBOL_GPL(rt2x00usb_disable_radio);
......@@ -441,31 +456,10 @@ EXPORT_SYMBOL_GPL(rt2x00usb_disable_radio);
*/
void rt2x00usb_clear_entry(struct queue_entry *entry)
{
struct usb_device *usb_dev =
to_usb_device_intf(entry->queue->rt2x00dev->dev);
struct queue_entry_priv_usb *entry_priv = entry->priv_data;
int pipe;
int status;
entry->flags = 0;
if (entry->queue->qid == QID_RX) {
pipe = usb_rcvbulkpipe(usb_dev, entry->queue->usb_endpoint);
usb_fill_bulk_urb(entry_priv->urb, usb_dev, pipe,
entry->skb->data, entry->skb->len,
rt2x00usb_interrupt_rxdone, entry);
set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
status = usb_submit_urb(entry_priv->urb, GFP_ATOMIC);
if (status) {
if (status == -ENODEV)
clear_bit(DEVICE_STATE_PRESENT,
&entry->queue->rt2x00dev->flags);
set_bit(ENTRY_DATA_IO_FAILED, &entry->flags);
rt2x00lib_dmadone(entry);
}
}
if (entry->queue->qid == QID_RX)
rt2x00usb_kick_rx_entry(entry);
}
EXPORT_SYMBOL_GPL(rt2x00usb_clear_entry);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment