rtw88: remove all RTW_MAX_POWER_INDEX macro

Since this macro definition has different values in different chipset,
the current defined macro value is for 8822b. This will cause the
settings of 8822c be incorrect.
Remove RTW_MAX_POWER_INDEX and use max_power_index in struct rtw_chip_info
to make sure the value of different chipset is right.
Signed-off-by: Tzu-En Huang <tehuang@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/realtek/rtw88/main.c

@@ -1071,7 +1071,7 @@ static int rtw_chip_board_info_setup(struct rtw_dev *rtwdev)
 
 	rtw_phy_setup_phy_cond(rtwdev, 0);
 
-	rtw_phy_init_tx_power(hal);
+	rtw_phy_init_tx_power(rtwdev);
 	rtw_load_table(rtwdev, rfe_def->phy_pg_tbl);
 	rtw_load_table(rtwdev, rfe_def->txpwr_lmt_tbl);
 	rtw_phy_tx_power_by_rate_config(hal);

drivers/net/wireless/realtek/rtw88/phy.c

@@ -1170,11 +1170,12 @@ static void rtw_phy_set_tx_power_limit(struct rtw_dev *rtwdev, u8 regd, u8 band,
 				       u8 bw, u8 rs, u8 ch, s8 pwr_limit)
 {
 	struct rtw_hal *hal = &rtwdev->hal;
+	u8 max_power_index = rtwdev->chip->max_power_index;
 	s8 ww;
 	int ch_idx;
 
 	pwr_limit = clamp_t(s8, pwr_limit,
-			    -RTW_MAX_POWER_INDEX, RTW_MAX_POWER_INDEX);
+			    -max_power_index, max_power_index);
 	ch_idx = rtw_channel_to_idx(band, ch);
 
 	if (regd >= RTW_REGD_MAX || bw >= RTW_CHANNEL_WIDTH_MAX ||
@@ -1204,16 +1205,17 @@ rtw_xref_5g_txpwr_lmt(struct rtw_dev *rtwdev, u8 regd,
 		      u8 bw, u8 ch_idx, u8 rs_ht, u8 rs_vht)
 {
 	struct rtw_hal *hal = &rtwdev->hal;
+	u8 max_power_index = rtwdev->chip->max_power_index;
 	s8 lmt_ht = hal->tx_pwr_limit_5g[regd][bw][rs_ht][ch_idx];
 	s8 lmt_vht = hal->tx_pwr_limit_5g[regd][bw][rs_vht][ch_idx];
 
 	if (lmt_ht == lmt_vht)
 		return;
 
-	if (lmt_ht == RTW_MAX_POWER_INDEX)
+	if (lmt_ht == max_power_index)
 		hal->tx_pwr_limit_5g[regd][bw][rs_ht][ch_idx] = lmt_vht;
 
-	else if (lmt_vht == RTW_MAX_POWER_INDEX)
+	else if (lmt_vht == max_power_index)
 		hal->tx_pwr_limit_5g[regd][bw][rs_vht][ch_idx] = lmt_ht;
 }
 
@@ -1546,14 +1548,14 @@ static s8 rtw_phy_get_tx_power_limit(struct rtw_dev *rtwdev, u8 band,
 {
 	struct rtw_hal *hal = &rtwdev->hal;
 	u8 *cch_by_bw = hal->cch_by_bw;
-	s8 power_limit = RTW_MAX_POWER_INDEX;
+	s8 power_limit = (s8)rtwdev->chip->max_power_index;
 	u8 rs;
 	int ch_idx;
 	u8 cur_bw, cur_ch;
 	s8 cur_lmt;
 
 	if (regd > RTW_REGD_WW)
-		return RTW_MAX_POWER_INDEX;
+		return power_limit;
 
 	if (rate >= DESC_RATE1M && rate <= DESC_RATE11M)
 		rs = RTW_RATE_SECTION_CCK;
@@ -1598,7 +1600,7 @@ static s8 rtw_phy_get_tx_power_limit(struct rtw_dev *rtwdev, u8 band,
 err:
 	WARN(1, "invalid arguments, band=%d, bw=%d, path=%d, rate=%d, ch=%d\n",
 	     band, bw, rf_path, rate, channel);
-	return RTW_MAX_POWER_INDEX;
+	return (s8)rtwdev->chip->max_power_index;
 }
 
 static u8
@@ -1785,22 +1787,25 @@ void rtw_phy_tx_power_limit_config(struct rtw_hal *hal)
 				__rtw_phy_tx_power_limit_config(hal, regd, bw, rs);
 }
 
-static void rtw_phy_init_tx_power_limit(struct rtw_hal *hal,
+static void rtw_phy_init_tx_power_limit(struct rtw_dev *rtwdev,
 					u8 regd, u8 bw, u8 rs)
 {
+	struct rtw_hal *hal = &rtwdev->hal;
+	s8 max_power_index = (s8)rtwdev->chip->max_power_index;
 	u8 ch;
 
 	/* 2.4G channels */
 	for (ch = 0; ch < RTW_MAX_CHANNEL_NUM_2G; ch++)
-		hal->tx_pwr_limit_2g[regd][bw][rs][ch] = RTW_MAX_POWER_INDEX;
+		hal->tx_pwr_limit_2g[regd][bw][rs][ch] = max_power_index;
 
 	/* 5G channels */
 	for (ch = 0; ch < RTW_MAX_CHANNEL_NUM_5G; ch++)
-		hal->tx_pwr_limit_5g[regd][bw][rs][ch] = RTW_MAX_POWER_INDEX;
+		hal->tx_pwr_limit_5g[regd][bw][rs][ch] = max_power_index;
 }
 
-void rtw_phy_init_tx_power(struct rtw_hal *hal)
+void rtw_phy_init_tx_power(struct rtw_dev *rtwdev)
 {
+	struct rtw_hal *hal = &rtwdev->hal;
 	u8 regd, path, rate, rs, bw;
 
 	/* init tx power by rate offset */
@@ -1815,5 +1820,6 @@ void rtw_phy_init_tx_power(struct rtw_hal *hal)
 	for (regd = 0; regd < RTW_REGD_MAX; regd++)
 		for (bw = 0; bw < RTW_CHANNEL_WIDTH_MAX; bw++)
 			for (rs = 0; rs < RTW_RATE_SECTION_MAX; rs++)
-				rtw_phy_init_tx_power_limit(hal, regd, bw, rs);
+				rtw_phy_init_tx_power_limit(rtwdev, regd, bw,
+							    rs);
 }

drivers/net/wireless/realtek/rtw88/phy.h

@@ -7,8 +7,6 @@
 
 #include "debug.h"
 
-#define RTW_MAX_POWER_INDEX		0x7F
-
 extern u8 rtw_cck_rates[];
 extern u8 rtw_ofdm_rates[];
 extern u8 rtw_ht_1s_rates[];
@@ -41,7 +39,7 @@ void rtw_phy_cfg_bb(struct rtw_dev *rtwdev, const struct rtw_table *tbl,
 		    u32 addr, u32 data);
 void rtw_phy_cfg_rf(struct rtw_dev *rtwdev, const struct rtw_table *tbl,
 		    u32 addr, u32 data);
-void rtw_phy_init_tx_power(struct rtw_hal *hal);
+void rtw_phy_init_tx_power(struct rtw_dev *rtwdev);
 void rtw_phy_load_tables(struct rtw_dev *rtwdev);
 void rtw_phy_set_tx_power_level(struct rtw_dev *rtwdev, u8 channel);
 void rtw_phy_tx_power_by_rate_config(struct rtw_hal *hal);