usb serial: Add generic USB wwan support

The generic USB serial code is ill-suited for high-speed USB wwan devices,
resulting in the option driver. However, other non-option devices may also
gain similar benefits from not using the generic code. Factorise out the
non-option specific code from the option driver and make it available to
other users.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/usb/serial/Kconfig

@@ -576,6 +576,9 @@ config USB_SERIAL_XIRCOM
 	  To compile this driver as a module, choose M here: the
 	  module will be called keyspan_pda.
 
+config USB_SERIAL_WWAN
+	tristate
+
 config USB_SERIAL_OPTION
 	tristate "USB driver for GSM and CDMA modems"
 	help

drivers/usb/serial/Makefile

@@ -52,6 +52,7 @@ obj-$(CONFIG_USB_SERIAL_SIEMENS_MPI)		+= siemens_mpi.o
 obj-$(CONFIG_USB_SERIAL_SIERRAWIRELESS)		+= sierra.o
 obj-$(CONFIG_USB_SERIAL_SPCP8X5)		+= spcp8x5.o
 obj-$(CONFIG_USB_SERIAL_SYMBOL)			+= symbolserial.o
+obj-$(CONFIG_USB_SERIAL_WWAN)			+= usb_wwan.o
 obj-$(CONFIG_USB_SERIAL_TI)			+= ti_usb_3410_5052.o
 obj-$(CONFIG_USB_SERIAL_VISOR)			+= visor.o
 obj-$(CONFIG_USB_SERIAL_WHITEHEAT)		+= whiteheat.o

drivers/usb/serial/usb-wwan.h

+/*
+ * Definitions for USB serial mobile broadband cards
+ */
+
+#ifndef __LINUX_USB_USB_WWAN
+#define __LINUX_USB_USB_WWAN
+
+extern void usb_wwan_dtr_rts(struct usb_serial_port *port, int on);
+extern int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port);
+extern void usb_wwan_close(struct usb_serial_port *port);
+extern int usb_wwan_startup(struct usb_serial *serial);
+extern void usb_wwan_disconnect(struct usb_serial *serial);
+extern void usb_wwan_release(struct usb_serial *serial);
+extern int usb_wwan_write_room(struct tty_struct *tty);
+extern void usb_wwan_set_termios(struct tty_struct *tty,
+				 struct usb_serial_port *port,
+				 struct ktermios *old);
+extern int usb_wwan_tiocmget(struct tty_struct *tty, struct file *file);
+extern int usb_wwan_tiocmset(struct tty_struct *tty, struct file *file,
+			     unsigned int set, unsigned int clear);
+extern int usb_wwan_send_setup(struct usb_serial_port *port);
+extern int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port,
+			  const unsigned char *buf, int count);
+extern int usb_wwan_chars_in_buffer(struct tty_struct *tty);
+#ifdef CONFIG_PM
+extern int usb_wwan_suspend(struct usb_serial *serial, pm_message_t message);
+extern int usb_wwan_resume(struct usb_serial *serial);
+#endif
+
+/* per port private data */
+
+#define N_IN_URB 4
+#define N_OUT_URB 4
+#define IN_BUFLEN 4096
+#define OUT_BUFLEN 4096
+
+struct usb_wwan_intf_private {
+	spinlock_t susp_lock;
+	unsigned int suspended:1;
+	int in_flight;
+	int (*send_setup) (struct usb_serial_port *port);
+	void *private;
+};
+
+struct usb_wwan_port_private {
+	/* Input endpoints and buffer for this port */
+	struct urb *in_urbs[N_IN_URB];
+	u8 *in_buffer[N_IN_URB];
+	/* Output endpoints and buffer for this port */
+	struct urb *out_urbs[N_OUT_URB];
+	u8 *out_buffer[N_OUT_URB];
+	unsigned long out_busy;	/* Bit vector of URBs in use */
+	int opened;
+	struct usb_anchor delayed;
+
+	/* Settings for the port */
+	int rts_state;		/* Handshaking pins (outputs) */
+	int dtr_state;
+	int cts_state;		/* Handshaking pins (inputs) */
+	int dsr_state;
+	int dcd_state;
+	int ri_state;
+
+	unsigned long tx_start_time[N_OUT_URB];
+};
+
+#endif /* __LINUX_USB_USB_WWAN */