PCI: dwc: Make use of BIT() in constant definitions

Avoid using explicit left shifts and convert various definitions to
use BIT() instead. No functional change intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
[lorenzo.pieralisi@arm.com: fixed PORT_LOGIC_SPEED_CHANGE redefinition]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: "A.s. Dong" <aisheng.dong@nxp.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: linux-imx@nxp.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-pci@vger.kernel.org

drivers/pci/controller/dwc/pci-imx6.c

@@ -121,7 +121,6 @@ struct imx6_pcie {
 #define PCIE_PHY_STAT_ACK_LOC 16
 
 #define PCIE_LINK_WIDTH_SPEED_CONTROL	0x80C
-#define PORT_LOGIC_SPEED_CHANGE		(0x1 << 17)
 
 /* PHY registers (not memory-mapped) */
 #define PCIE_PHY_ATEOVRD			0x10

drivers/pci/controller/dwc/pcie-designware.c

@@ -306,7 +306,7 @@ void dw_pcie_disable_atu(struct dw_pcie *pci, int index,
 	}
 
 	dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT, region | index);
-	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, ~PCIE_ATU_ENABLE);
+	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, (u32)~PCIE_ATU_ENABLE);
 }
 
 int dw_pcie_wait_for_link(struct dw_pcie *pci)

drivers/pci/controller/dwc/pcie-designware.h

@@ -41,7 +41,7 @@
 #define PORT_LOGIC_LTSSM_STATE_L0	0x11
 
 #define PCIE_LINK_WIDTH_SPEED_CONTROL	0x80C
-#define PORT_LOGIC_SPEED_CHANGE		(0x1 << 17)
+#define PORT_LOGIC_SPEED_CHANGE		BIT(17)
 #define PORT_LOGIC_LINK_WIDTH_MASK	(0x1f << 8)
 #define PORT_LOGIC_LINK_WIDTH_1_LANES	(0x1 << 8)
 #define PORT_LOGIC_LINK_WIDTH_2_LANES	(0x2 << 8)
@@ -55,8 +55,8 @@
 #define PCIE_MSI_INTR0_STATUS		0x830
 
 #define PCIE_ATU_VIEWPORT		0x900
-#define PCIE_ATU_REGION_INBOUND		(0x1 << 31)
-#define PCIE_ATU_REGION_OUTBOUND	(0x0 << 31)
+#define PCIE_ATU_REGION_INBOUND		BIT(31)
+#define PCIE_ATU_REGION_OUTBOUND	0
 #define PCIE_ATU_REGION_INDEX2		(0x2 << 0)
 #define PCIE_ATU_REGION_INDEX1		(0x1 << 0)
 #define PCIE_ATU_REGION_INDEX0		(0x0 << 0)
@@ -66,8 +66,8 @@
 #define PCIE_ATU_TYPE_CFG0		(0x4 << 0)
 #define PCIE_ATU_TYPE_CFG1		(0x5 << 0)
 #define PCIE_ATU_CR2			0x908
-#define PCIE_ATU_ENABLE			(0x1 << 31)
-#define PCIE_ATU_BAR_MODE_ENABLE	(0x1 << 30)
+#define PCIE_ATU_ENABLE			BIT(31)
+#define PCIE_ATU_BAR_MODE_ENABLE	BIT(30)
 #define PCIE_ATU_LOWER_BASE		0x90C
 #define PCIE_ATU_UPPER_BASE		0x910
 #define PCIE_ATU_LIMIT			0x914
@@ -78,7 +78,7 @@
 #define PCIE_ATU_UPPER_TARGET		0x91C
 
 #define PCIE_MISC_CONTROL_1_OFF		0x8BC
-#define PCIE_DBI_RO_WR_EN		(0x1 << 0)
+#define PCIE_DBI_RO_WR_EN		BIT(0)
 
 /*
  * iATU Unroll-specific register definitions
@@ -105,7 +105,7 @@
 		((region) << 9)
 
 #define PCIE_GET_ATU_INB_UNR_REG_OFFSET(region) \
-		(((region) << 9) | (0x1 << 8))
+		(((region) << 9) | BIT(8))
 
 #define MAX_MSI_IRQS			256
 #define MAX_MSI_IRQS_PER_CTRL		32