Merge branch 'net-phy-mscc-miim-reduce-waiting-time-between-MDIO-transactions'

Antoine Tenart says:

====================
net: phy: mscc-miim: reduce waiting time between MDIO transactions

This series aims at reducing the waiting time between MDIO transactions
when using the MSCC MIIM MDIO controller.

I'm not sure we need patch 4/4 and we could reasonably drop it from the
series. I'm including the patch as it could help to ensure the system
is functional with a non optimal configuration.

We needed to improve the driver's performances as when using a PHY
requiring lots of registers accesses (such as the VSC85xx family),
delays would add up and ended up to be quite large which would cause
issues such as: a slow initialization of the PHY, and issues when using
timestamping operations (this feature will be sent quite soon to the
mailing lists).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/Kconfig

@@ -184,7 +184,8 @@ config MDIO_MSCC_MIIM
 	depends on HAS_IOMEM
 	help
 	  This driver supports the MIIM (MDIO) interface found in the network
-	  switches of the Microsemi SoCs
+	  switches of the Microsemi SoCs; it is recommended to switch on
+	  CONFIG_HIGH_RES_TIMERS
 
 config MDIO_MVUSB
 	tristate "Marvell USB to MDIO Adapter"

drivers/net/phy/mdio-mscc-miim.c

@@ -16,6 +16,7 @@
 #include <linux/of_mdio.h>
 
 #define MSCC_MIIM_REG_STATUS		0x0
+#define		MSCC_MIIM_STATUS_STAT_PENDING	BIT(2)
 #define		MSCC_MIIM_STATUS_STAT_BUSY	BIT(3)
 #define MSCC_MIIM_REG_CMD		0x8
 #define		MSCC_MIIM_CMD_OPR_WRITE		BIT(1)
@@ -38,17 +39,35 @@ struct mscc_miim_dev {
 	void __iomem *phy_regs;
 };
 
+/* When high resolution timers aren't built-in: we can't use usleep_range() as
+ * we would sleep way too long. Use udelay() instead.
+ */
+#define mscc_readl_poll_timeout(addr, val, cond, delay_us, timeout_us)	\
+({									\
+	if (!IS_ENABLED(CONFIG_HIGH_RES_TIMERS))			\
+		readl_poll_timeout_atomic(addr, val, cond, delay_us,	\
+					  timeout_us);			\
+	readl_poll_timeout(addr, val, cond, delay_us, timeout_us);	\
+})
+
 static int mscc_miim_wait_ready(struct mii_bus *bus)
 {
 	struct mscc_miim_dev *miim = bus->priv;
 	u32 val;
 
-	readl_poll_timeout(miim->regs + MSCC_MIIM_REG_STATUS, val,
-			   !(val & MSCC_MIIM_STATUS_STAT_BUSY), 100, 250000);
-	if (val & MSCC_MIIM_STATUS_STAT_BUSY)
-		return -ETIMEDOUT;
+	return mscc_readl_poll_timeout(miim->regs + MSCC_MIIM_REG_STATUS, val,
+				       !(val & MSCC_MIIM_STATUS_STAT_BUSY), 50,
+				       10000);
+}
 
-	return 0;
+static int mscc_miim_wait_pending(struct mii_bus *bus)
+{
+	struct mscc_miim_dev *miim = bus->priv;
+	u32 val;
+
+	return mscc_readl_poll_timeout(miim->regs + MSCC_MIIM_REG_STATUS, val,
+				       !(val & MSCC_MIIM_STATUS_STAT_PENDING),
+				       50, 10000);
 }
 
 static int mscc_miim_read(struct mii_bus *bus, int mii_id, int regnum)
@@ -57,7 +76,7 @@ static int mscc_miim_read(struct mii_bus *bus, int mii_id, int regnum)
 	u32 val;
 	int ret;
 
-	ret = mscc_miim_wait_ready(bus);
+	ret = mscc_miim_wait_pending(bus);
 	if (ret)
 		goto out;
 
@@ -86,7 +105,7 @@ static int mscc_miim_write(struct mii_bus *bus, int mii_id,
 	struct mscc_miim_dev *miim = bus->priv;
 	int ret;
 
-	ret = mscc_miim_wait_ready(bus);
+	ret = mscc_miim_wait_pending(bus);
 	if (ret < 0)
 		goto out;