Skip to content

L
linux
Commit 0ea12930 authored by Jeremy Kerr's avatar Jeremy Kerr Committed by Nicolas Pitre
Browse files
Options

arm: return both physical and virtual addresses from addruart 

Rather than checking the MMU status in every instance of addruart, do it
once in kernel/debug.S, and change the existing addruart macros to
return both physical and virtual addresses. The main debug code can then
select the appropriate address to use.

This will also allow us to retreive the address of a uart for the MMU
state that we're not current in.

Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com>
and Tony Lindgren <tony@atomide.com>, and fix for versatile express from
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>.
Signed-off-by: default avatarJeremy Kerr <jeremy.kerr@canonical.com>
Signed-off-by: default avatarLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: default avatarJason Wang <jason77.wang@gmail.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
Tested-by: default avatarKevin Hilman <khilman@deeprootsystems.com>
parent 1ea64615
Hide whitespace changes
Inline Side-by-side
Showing with 440 additions and 454 deletions
arch/arm/kernel/debug.S
View file @ 0ea12930
......@@ -22,7 +22,7 @@
#if defined(CONFIG_DEBUG_ICEDCC)
@@ debug using ARM EmbeddedICE DCC channel
.macro addruart, rx, tmp
.macro addruart, rp, rv
.endm
#if defined(CONFIG_CPU_V6)
......@@ -121,6 +121,22 @@ wait: mrc p14, 0, pc, c0, c1, 0
#include <mach/debug-macro.S>
#endif /* CONFIG_DEBUG_ICEDCC */
#ifdef CONFIG_MMU
.macro addruart_current, rx, tmp1, tmp2
addruart \tmp1, \tmp2
mrc p15, 0, \rx, c1, c0
tst \rx, #1
moveq \rx, \tmp1
movne \rx, \tmp2
.endm
#else /* !CONFIG_MMU */
.macro addruart_current, rx, tmp1, tmp2
addruart \rx, \tmp1
.endm
#endif /* CONFIG_MMU */
/*
* Useful debugging routines
*/
......@@ -155,7 +171,7 @@ ENDPROC(printhex2)
.ltorg
ENTRY(printascii)
addruart r3, r1
addruart_current r3, r1, r2
b 2f
1: waituart r2, r3
senduart r1, r3
......@@ -171,7 +187,7 @@ ENTRY(printascii)
ENDPROC(printascii)
ENTRY(printch)
addruart r3, r1
addruart_current r3, r1, r2
mov r1, r0
mov r0, #0
b 1b
......
arch/arm/mach-aaec2000/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -10,12 +10,10 @@
*/
#include "hardware.h"
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x80000000 @ physical
movne \rx, #io_p2v(0x80000000) @ virtual
orr \rx, \rx, #0x00000800
.macro addruart, rp, rv
mov \rp, 0x00000800
orr \rv, \rp, #io_p2v(0x80000000) @ virtual
orr \rp, \rp, #0x80000000 @ physical
.endm
.macro senduart,rd,rx
......
arch/arm/mach-at91/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -14,11 +14,9 @@
#include <mach/hardware.h>
#include <mach/at91_dbgu.h>
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address)
ldrne \rx, =(AT91_VA_BASE_SYS + AT91_DBGU) @ System peripherals (virt address)
.macro addruart, rp, rv
ldr \rp, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address)
ldr \rv, =(AT91_VA_BASE_SYS + AT91_DBGU) @ System peripherals (virt address)
.endm
.macro senduart,rd,rx
......
arch/arm/mach-clps711x/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -14,16 +14,14 @@
#include <mach/hardware.h>
#include <asm/hardware/clps7111.h>
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #CLPS7111_PHYS_BASE
movne \rx, #CLPS7111_VIRT_BASE
.macro addruart, rp, rv
#ifndef CONFIG_DEBUG_CLPS711X_UART2
add \rx, \rx, #0x0000 @ UART1
mov \rp, #0x0000 @ UART1
#else
add \rx, \rx, #0x1000 @ UART2
mov \rp, #0x1000 @ UART2
#endif
orr \rv, \rp, #CLPS7111_VIRT_BASE
orr \rp, \rp, #CLPS7111_PHYS_BASE
.endm
.macro senduart,rd,rx
......
arch/arm/mach-cns3xxx/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -10,12 +10,10 @@
* published by the Free Software Foundation.
*/
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x10000000
movne \rx, #0xf0000000 @ virtual base
orr \rx, \rx, #0x00009000
.macro addruart,rp,rv
mov \rp, #0x00009000
orr \rv, \rp, #0xf0000000 @ virtual base
orr \rp, \rp, #0x10000000
.endm
#include <asm/hardware/debug-pl01x.S>
arch/arm/mach-davinci/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -29,35 +29,39 @@ davinci_uart_phys: .word 0
davinci_uart_virt: .word 0
.popsection
.macro addruart, rx, tmp
.macro addruart, rp, rv
/* Use davinci_uart_phys/virt if already configured */
10: mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =__virt_to_phys(davinci_uart_phys)
ldrne \rx, =davinci_uart_virt
ldr \rx, [\rx]
cmp \rx, #0 @ is port configured?
10: mrc p15, 0, \rp, c1, c0
tst \rp, #1 @ MMU enabled?
ldreq \rp, =__virt_to_phys(davinci_uart_phys)
ldrne \rp, =davinci_uart_phys
add \rv, \rp, #4 @ davinci_uart_virt
ldr \rp, [\rp, #0]
ldr \rv, [\rv, #0]
cmp \rp, #0 @ is port configured?
cmpne \rv, #0
bne 99f @ already configured
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
/* Check the debug UART address set in uncompress.h */
mrc p15, 0, \rp, c1, c0
tst \rp, #1 @ MMU enabled?
/* Copy uart phys address from decompressor uart info */
ldreq \tmp, =__virt_to_phys(davinci_uart_phys)
ldrne \tmp, =davinci_uart_phys
ldreq \rx, =DAVINCI_UART_INFO
ldrne \rx, =__phys_to_virt(DAVINCI_UART_INFO)
ldr \rx, [\rx, #0]
str \rx, [\tmp]
ldreq \rv, =__virt_to_phys(davinci_uart_phys)
ldrne \rv, =davinci_uart_phys
ldreq \rp, =DAVINCI_UART_INFO
ldrne \rp, =__phys_to_virt(DAVINCI_UART_INFO)
ldr \rp, [\rp, #0]
str \rp, [\rv]
/* Copy uart virt address from decompressor uart info */
ldreq \tmp, =__virt_to_phys(davinci_uart_virt)
ldrne \tmp, =davinci_uart_virt
ldreq \rx, =DAVINCI_UART_INFO
ldrne \rx, =__phys_to_virt(DAVINCI_UART_INFO)
ldr \rx, [\rx, #4]
str \rx, [\tmp]
ldreq \rv, =__virt_to_phys(davinci_uart_virt)
ldrne \rv, =davinci_uart_virt
ldreq \rp, =DAVINCI_UART_INFO
ldrne \rp, =__phys_to_virt(DAVINCI_UART_INFO)
ldr \rp, [\rp, #4]
str \rp, [\rv]
b 10b
99:
......
arch/arm/mach-dove/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -8,12 +8,11 @@
#include <mach/bridge-regs.h>
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =DOVE_SB_REGS_PHYS_BASE
ldrne \rx, =DOVE_SB_REGS_VIRT_BASE
orr \rx, \rx, #0x00012000
.macro addruart, rp, rv
ldr \rp, =DOVE_SB_REGS_PHYS_BASE
ldr \rv, =DOVE_SB_REGS_VIRT_BASE
orr \rp, \rp, #0x00012000
orr \rv, \rv, #0x00012000
.endm
#define UART_SHIFT 2
......
arch/arm/mach-ebsa110/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -11,9 +11,10 @@
*
**/
.macro addruart, rx, tmp
mov \rx, #0xf0000000
orr \rx, \rx, #0x00000be0
.macro addruart, rp, rv
mov \rp, #0xf0000000
orr \rp, \rp, #0x00000be0
mov \rp, \rv
.endm
#define UART_SHIFT 2
......
arch/arm/mach-ep93xx/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -11,12 +11,11 @@
*/
#include <mach/ep93xx-regs.h>
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =EP93XX_APB_PHYS_BASE @ Physical base
ldrne \rx, =EP93XX_APB_VIRT_BASE @ virtual base
orr \rx, \rx, #0x000c0000
.macro addruart, rp, rv
ldr \rp, =EP93XX_APB_PHYS_BASE @ Physical base
ldr \rv, =EP93XX_APB_VIRT_BASE @ virtual base
orr \rp, \rp, #0x000c0000
orr \rv, \rv, #0x000c0000
.endm
#include <asm/hardware/debug-pl01x.S>
arch/arm/mach-footbridge/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -15,12 +15,10 @@
#ifndef CONFIG_DEBUG_DC21285_PORT
/* For NetWinder debugging */
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x7c000000 @ physical
movne \rx, #0xff000000 @ virtual
orr \rx, \rx, #0x000003f8
.macro addruart, rp, rv
mov \rp, #0x000003f8
orr \rv, \rp, #0x7c000000 @ physical
orr \rp, \rp, #0xff000000 @ virtual
.endm
#define UART_SHIFT 0
......@@ -32,14 +30,14 @@
.equ dc21285_high, ARMCSR_BASE & 0xff000000
.equ dc21285_low, ARMCSR_BASE & 0x00ffffff
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x42000000
movne \rx, #dc21285_high
.macro addruart, rp, rv
.if dc21285_low
orrne \rx, \rx, #dc21285_low
mov \rp, #dc21285_low
.else
mov \rp, #0
.endif
orr \rv, \rp, #0x42000000
orr \rp, \rp, #dc21285_high
.endm
.macro senduart,rd,rx
......
arch/arm/mach-gemini/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -11,11 +11,9 @@
*/
#include <mach/hardware.h>
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =GEMINI_UART_BASE @ physical
ldrne \rx, =IO_ADDRESS(GEMINI_UART_BASE) @ virtual
.macro addruart, rp, rv
ldr \rp, =GEMINI_UART_BASE @ physical
ldr \rv, =IO_ADDRESS(GEMINI_UART_BASE) @ virtual
.endm
#define UART_SHIFT 2
......
arch/arm/mach-h720x/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -16,12 +16,10 @@
.equ io_virt, IO_VIRT
.equ io_phys, IO_PHYS
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #io_phys @ physical base address
movne \rx, #io_virt @ virtual address
add \rx, \rx, #0x00020000 @ UART1
.macro addruart, rp, rv
mov \rp, #0x00020000 @ UART1
add \rv, \rp, #io_virt @ virtual address
add \rp, \rp, #io_phys @ physical base address
.endm
.macro senduart,rd,rx
......
arch/arm/mach-integrator/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -11,12 +11,10 @@
*
*/
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x16000000 @ physical base address
movne \rx, #0xf0000000 @ virtual base
addne \rx, \rx, #0x16000000 >> 4
.macro addruart, rp, rv
mov \rp, #0x16000000 @ physical base address
mov \rv, #0xf0000000 @ virtual base
add \rv, \rv, #0x16000000 >> 4
.endm
#include <asm/hardware/debug-pl01x.S>
arch/arm/mach-iop13xx/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -11,15 +11,13 @@
* published by the Free Software Foundation.
*/
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ mmu enabled?
moveq \rx, #0xff000000 @ physical
orreq \rx, \rx, #0x00d80000
movne \rx, #0xfe000000 @ virtual
orrne \rx, \rx, #0x00e80000
orr \rx, \rx, #0x00002300
orr \rx, \rx, #0x00000040
.macro addruart, rp, rv
mov \rp, #0x00002300
orr \rp, \rp, #0x00000040
orr \rv, \rp, #0xfe000000 @ virtual
orr \rv, \rv, #0x00e80000
orr \rp, \rp, #0xff000000 @ physical
orr \rp, \rp, #0x00d80000
.endm
#define UART_SHIFT 2
......
arch/arm/mach-iop32x/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -11,9 +11,10 @@
* published by the Free Software Foundation.
*/
.macro addruart, rx, tmp
mov \rx, #0xfe000000 @ physical as well as virtual
orr \rx, \rx, #0x00800000 @ location of the UART
.macro addruart, rp, rv
mov \rp, #0xfe000000 @ physical as well as virtual
orr \rp, \rp, #0x00800000 @ location of the UART
mov \rv, \rp
.endm
#define UART_SHIFT 0
......
arch/arm/mach-iop33x/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -11,13 +11,11 @@
* published by the Free Software Foundation.
*/
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ mmu enabled?
moveq \rx, #0xff000000 @ physical
movne \rx, #0xfe000000 @ virtual
orr \rx, \rx, #0x00ff0000
orr \rx, \rx, #0x0000f700
.macro addruart, rp, rv
mov \rp, #0x00ff0000
orr \rp, \rp, #0x0000f700
orr \rv, #0xfe000000 @ virtual
orr \rp, #0xff000000 @ physical
.endm
#define UART_SHIFT 2
......
arch/arm/mach-ixp2000/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -11,16 +11,14 @@
*
*/
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0xc0000000 @ Physical base
movne \rx, #0xfe000000 @ virtual base
orrne \rx, \rx, #0x00f00000
orr \rx, \rx, #0x00030000
.macro addruart, rp, rv
mov \rp, #0x00030000
#ifdef __ARMEB__
orr \rx, \rx, #0x00000003
orr \rp, \rp, #0x00000003
#endif
orr \rv, \rp, #0xfe000000 @ virtual base
orr \rv, \rv, #0x00f00000
orr \rp, \rp, #0xc0000000 @ Physical base
.endm
#define UART_SHIFT 2
......
arch/arm/mach-ixp23xx/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -12,13 +12,12 @@
*/
#include <mach/ixp23xx.h>
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ mmu enabled?
ldreq \rx, =IXP23XX_PERIPHERAL_PHYS @ physical
ldrne \rx, =IXP23XX_PERIPHERAL_VIRT @ virtual
.macro addruart, rp, rv
ldr \rp, =IXP23XX_PERIPHERAL_PHYS @ physical
ldr \rv, =IXP23XX_PERIPHERAL_VIRT @ virtual
#ifdef __ARMEB__
orr \rx, \rx, #0x00000003
orr \rp, \rp, #0x00000003
orr \rv, \rv, #0x00000003
#endif
.endm
......
arch/arm/mach-ixp4xx/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -10,16 +10,16 @@
* published by the Free Software Foundation.
*/
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0xc8000000
movne \rx, #0xff000000
orrne \rx, \rx, #0x00b00000
.macro addruart, rp, rv
#ifdef __ARMEB__
add \rx,\rx,#3 @ Uart regs are at off set of 3 if
@ byte writes used - Big Endian.
mov \rp, #3 @ Uart regs are at off set of 3 if
@ byte writes used - Big Endian.
#else
mov \rp, #0
#endif
orr \rv, \rp, #0xff000000 @ virtual
orr \rv, \rv, #0x00b00000
orr \rp, \rp, #0xc8000000 @ physical
.endm
#define UART_SHIFT 2
......
arch/arm/mach-kirkwood/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -8,12 +8,11 @@
#include <mach/bridge-regs.h>
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =KIRKWOOD_REGS_PHYS_BASE
ldrne \rx, =KIRKWOOD_REGS_VIRT_BASE
orr \rx, \rx, #0x00012000
.macro addruart, rp, rv
ldr \rp, =KIRKWOOD_REGS_PHYS_BASE
ldr \rv, =KIRKWOOD_REGS_VIRT_BASE
orr \rp, \rp, #0x00012000
orr \rv, \rv, #0x00012000
.endm
#define UART_SHIFT 2
......
arch/arm/mach-ks8695/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -14,11 +14,9 @@
#include <mach/hardware.h>
#include <mach/regs-uart.h>
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =KS8695_UART_PA @ physical base address
ldrne \rx, =KS8695_UART_VA @ virtual base address
.macro addruart, rp, rv
ldr \rp, =KS8695_UART_PA @ physical base address
ldr \rv, =KS8695_UART_VA @ virtual base address
.endm
.macro senduart, rd, rx
......
arch/arm/mach-l7200/include/mach/debug-macro.S 0 → 100644
View file @ 0ea12930
/* arch/arm/mach-l7200/include/mach/debug-macro.S
*
* Debugging macro include header
*
* Copyright (C) 1994-1999 Russell King
* Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
.equ io_virt, IO_BASE
.equ io_phys, IO_START
.macro addruart, rp, rv
mov \rp, #0x00044000 @ UART1
@ mov \rp, #0x00045000 @ UART2
add \rv, \rp, #io_virt @ virtual address
add \rp, \rp, #io_phys @ physical base address
.endm
.macro senduart,rd,rx
str \rd, [\rx, #0x0] @ UARTDR
.endm
.macro waituart,rd,rx
1001: ldr \rd, [\rx, #0x18] @ UARTFLG
tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full
bne 1001b
.endm
.macro busyuart,rd,rx
1001: ldr \rd, [\rx, #0x18] @ UARTFLG
tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy
bne 1001b
.endm
arch/arm/mach-lh7a40x/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -14,12 +14,10 @@
@ It is not known if this will be appropriate for every 40x
@ board.
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
mov \rx, #0x00000700 @ offset from base
orreq \rx, \rx, #0x80000000 @ physical base
orrne \rx, \rx, #0xf8000000 @ virtual base
.macro addruart, rp, rv
mov \rp, #0x00000700 @ offset from base
orr \rv, \rp, #0xf8000000 @ virtual base
orr \rp, \rp, #0x80000000 @ physical base
.endm
.macro senduart,rd,rx
......
arch/arm/mach-loki/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -8,12 +8,11 @@
#include <mach/loki.h>
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =LOKI_REGS_PHYS_BASE
ldrne \rx, =LOKI_REGS_VIRT_BASE
orr \rx, \rx, #0x00012000
.macro addruart, rp, rv
ldr \rp, =LOKI_REGS_PHYS_BASE
ldr \rv, =LOKI_REGS_VIRT_BASE
orr \rp, \rp, #0x00012000
orr \rv, \rv, #0x00012000
.endm
#define UART_SHIFT 2
......
arch/arm/mach-lpc32xx/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -20,11 +20,9 @@
* Debug output is hardcoded to standard UART 5
*/
.macro addruart,rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =0x40090000
ldrne \rx, =0xF4090000
.macro addruart, rp, rv
ldreq \rp, =0x40090000
ldrne \rv, =0xF4090000
.endm
#define UART_SHIFT 2
......
arch/arm/mach-mmp/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -11,12 +11,11 @@
#include <mach/addr-map.h>
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =APB_PHYS_BASE @ physical
ldrne \rx, =APB_VIRT_BASE @ virtual
orr \rx, \rx, #0x00017000
.macro addruart, rp, rv
ldr \rp, =APB_PHYS_BASE @ physical
ldr \rv, =APB_VIRT_BASE @ virtual
orr \rp, \rp, #0x00017000
orr \rv, \rv, #0x00017000
.endm
#define UART_SHIFT 2
......
arch/arm/mach-msm/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -20,12 +20,9 @@
#include <mach/msm_iomap.h>
#ifdef CONFIG_HAS_MSM_DEBUG_UART_PHYS
.macro addruart, rx, tmp
@ see if the MMU is enabled and select appropriate base address
mrc p15, 0, \rx, c1, c0
tst \rx, #1
ldreq \rx, =MSM_DEBUG_UART_PHYS
ldrne \rx, =MSM_DEBUG_UART_BASE
.macro addruart, rp, rv
ldr \rp, =MSM_DEBUG_UART_PHYS
ldr \rv, =MSM_DEBUG_UART_BASE
.endm
.macro senduart,rd,rx
......@@ -39,16 +36,7 @@
tst \rd, #0x04
beq 1001b
.endm
#else
.macro addruart, rx, tmp
.endm
.macro senduart,rd,rx
.endm
.macro waituart,rd,rx
.endm
#endif
.macro busyuart,rd,rx
.endm
#endif
arch/arm/mach-mv78xx0/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -8,12 +8,11 @@
#include <mach/mv78xx0.h>
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =MV78XX0_REGS_PHYS_BASE
ldrne \rx, =MV78XX0_REGS_VIRT_BASE
orr \rx, \rx, #0x00012000
.macro addruart, rp, rv
ldr \rp, =MV78XX0_REGS_PHYS_BASE
ldr \rv, =MV78XX0_REGS_VIRT_BASE
orr \rp, \rp, #0x00012000
orr \rv, \rv, #0x00012000
.endm
#define UART_SHIFT 2
......
arch/arm/mach-netx/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -13,12 +13,10 @@
#include "hardware.h"
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x00100000 @ physical
movne \rx, #io_p2v(0x00100000) @ virtual
orr \rx, \rx, #0x00000a00
.macro addruart, rp, rv
mov \rp, #0x00000a00
orr \rv, \rp, #io_p2v(0x00100000) @ virtual
orr \rp, \rp, #0x00100000 @ physical
.endm
.macro senduart,rd,rx
......
arch/arm/mach-nomadik/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -10,13 +10,11 @@
*
*/
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x10000000 @ physical base address
movne \rx, #0xf0000000 @ virtual base
add \rx, \rx, #0x00100000
add \rx, \rx, #0x000fb000
.macro addruart, rp, rv
mov \rp, #0x00100000
add \rp, \rp, #0x000fb000
add \rv, \rp, #0xf0000000 @ virtual base
add \rp, \rp, #0x10000000 @ physical base address
.endm
#include <asm/hardware/debug-pl01x.S>
arch/arm/mach-ns9xxx/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -12,11 +12,9 @@
#include <mach/regs-board-a9m9750dev.h>
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1
ldreq \rx, =NS9XXX_CSxSTAT_PHYS(0)
ldrne \rx, =io_p2v(NS9XXX_CSxSTAT_PHYS(0))
.macro addruart, rp, rv
ldr \rp, =NS9XXX_CSxSTAT_PHYS(0)
ldr \rv, =io_p2v(NS9XXX_CSxSTAT_PHYS(0))
.endm
#define UART_SHIFT 2
......
arch/arm/mach-omap1/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -28,56 +28,58 @@ omap_uart_virt: .word 0x0
* the desired UART phys and virt addresses temporarily into
* the omap_uart_phys and omap_uart_virt above.
*/
.macro addruart, rx, tmp
.macro addruart, rp, rv
/* Use omap_uart_phys/virt if already configured */
9: mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =__virt_to_phys(omap_uart_phys) @ physical base address
ldrne \rx, =omap_uart_virt @ virtual base
ldr \rx, [\rx, #0]
cmp \rx, #0 @ is port configured?
9: mrc p15, 0, \rp, c1, c0
tst \rp, #1 @ MMU enabled?
ldreq \rp, =__virt_to_phys(omap_uart_phys) @ MMU not enabled
ldrne \rp, =omap_uart_phys @ MMU enabled
add \rv, \rp, #4 @ omap_uart_virt
ldr \rp, [\rp, #0]
ldr \rv, [\rv, #0]
cmp \rp, #0 @ is port configured?
cmpne \rv, #0
bne 99f @ already configured
/* Check the debug UART configuration set in uncompress.h */
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =OMAP_UART_INFO
ldrne \rx, =__phys_to_virt(OMAP_UART_INFO)
ldr \rx, [\rx, #0]
mrc p15, 0, \rp, c1, c0
tst \rp, #1 @ MMU enabled?
ldreq \rp, =OMAP_UART_INFO @ MMU not enabled
ldrne \rp, =__phys_to_virt(OMAP_UART_INFO) @ MMU enabled
ldr \rp, [\rp, #0]
/* Select the UART to use based on the UART1 scratchpad value */
10: cmp \rx, #0 @ no port configured?
10: cmp \rp, #0 @ no port configured?
beq 11f @ if none, try to use UART1
cmp \rx, #OMAP1UART1
cmp \rp, #OMAP1UART1
beq 11f @ configure OMAP1UART1
cmp \rx, #OMAP1UART2
cmp \rp, #OMAP1UART2
beq 12f @ configure OMAP1UART2
cmp \rx, #OMAP1UART3
cmp \rp, #OMAP1UART3
beq 13f @ configure OMAP2UART3
/* Configure the UART offset from the phys/virt base */
11: mov \rx, #0x00fb0000 @ OMAP1UART1
11: mov \rp, #0x00fb0000 @ OMAP1UART1
b 98f
12: mov \rx, #0x00fb0000 @ OMAP1UART1
orr \rx, \rx, #0x00000800 @ OMAP1UART2
12: mov \rp, #0x00fb0000 @ OMAP1UART1
orr \rp, \rp, #0x00000800 @ OMAP1UART2
b 98f
13: mov \rx, #0x00fb0000 @ OMAP1UART1
orr \rx, \rx, #0x00000800 @ OMAP1UART2
orr \rx, \rx, #0x00009000 @ OMAP1UART3
13: mov \rp, #0x00fb0000 @ OMAP1UART1
orr \rp, \rp, #0x00000800 @ OMAP1UART2
orr \rp, \rp, #0x00009000 @ OMAP1UART3
/* Store both phys and virt address for the uart */
98: add \rx, \rx, #0xff000000 @ phys base
mrc p15, 0, \tmp, c1, c0
tst \tmp, #1 @ MMU enabled?
ldreq \tmp, =__virt_to_phys(omap_uart_phys)
ldrne \tmp, =omap_uart_phys
str \rx, [\tmp, #0]
sub \rx, \rx, #0xff000000 @ phys base
add \rx, \rx, #0xfe000000 @ virt base
ldreq \tmp, =__virt_to_phys(omap_uart_virt)
ldrne \tmp, =omap_uart_virt
str \rx, [\tmp, #0]
98: add \rp, \rp, #0xff000000 @ phys base
mrc p15, 0, \rv, c1, c0
tst \rv, #1 @ MMU enabled?
ldreq \rv, =__virt_to_phys(omap_uart_phys) @ MMU not enabled
ldrne \rv, =omap_uart_phys @ MMU enabled
str \rp, [\rv, #0]
sub \rp, \rp, #0xff000000 @ phys base
add \rp, \rp, #0xfe000000 @ virt base
add \rv, \rv, #4 @ omap_uart_lsr
str \rp, [\rv, #0]
b 9b
99:
.endm
......
arch/arm/mach-omap2/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -31,95 +31,94 @@ omap_uart_lsr: .word 0
* the desired UART phys and virt addresses temporarily into
* the omap_uart_phys and omap_uart_virt above.
*/
.macro addruart, rx, tmp
.macro addruart, rp, rv
/* Use omap_uart_phys/virt if already configured */
10: mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =__virt_to_phys(omap_uart_phys) @ physical base address
ldrne \rx, =omap_uart_virt @ virtual base address
ldr \rx, [\rx, #0]
cmp \rx, #0 @ is port configured?
10: mrc p15, 0, \rp, c1, c0
tst \rp, #1 @ MMU enabled?
ldreq \rp, =__virt_to_phys(omap_uart_phys) @ MMU not enabled
ldrne \rp, =omap_uart_phys @ MMU enabled
add \rv, \rp, #4 @ omap_uart_virt
ldr \rp, [\rp, #0]
ldr \rv, [\rv, #0]
cmp \rp, #0 @ is port configured?
cmpne \rv, #0
bne 99f @ already configured
/* Check the debug UART configuration set in uncompress.h */
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =OMAP_UART_INFO
ldrne \rx, =__phys_to_virt(OMAP_UART_INFO)
ldr \rx, [\rx, #0]
mrc p15, 0, \rp, c1, c0
tst \rp, #1 @ MMU enabled?
ldreq \rp, =OMAP_UART_INFO @ MMU not enabled
ldrne \rp, =__phys_to_virt(OMAP_UART_INFO) @ MMU enabled
ldr \rp, [\rp, #0]
/* Select the UART to use based on the UART1 scratchpad value */
cmp \rx, #0 @ no port configured?
cmp \rp, #0 @ no port configured?
beq 21f @ if none, try to use UART1
cmp \rx, #OMAP2UART1 @ OMAP2/3/4UART1
cmp \rp, #OMAP2UART1 @ OMAP2/3/4UART1
beq 21f @ configure OMAP2/3/4UART1
cmp \rx, #OMAP2UART2 @ OMAP2/3/4UART2
cmp \rp, #OMAP2UART2 @ OMAP2/3/4UART2
beq 22f @ configure OMAP2/3/4UART2
cmp \rx, #OMAP2UART3 @ only on 24xx
cmp \rp, #OMAP2UART3 @ only on 24xx
beq 23f @ configure OMAP2UART3
cmp \rx, #OMAP3UART3 @ only on 34xx
cmp \rp, #OMAP3UART3 @ only on 34xx
beq 33f @ configure OMAP3UART3
cmp \rx, #OMAP4UART3 @ only on 44xx
cmp \rp, #OMAP4UART3 @ only on 44xx
beq 43f @ configure OMAP4UART3
cmp \rx, #OMAP3UART4 @ only on 36xx
cmp \rp, #OMAP3UART4 @ only on 36xx
beq 34f @ configure OMAP3UART4
cmp \rx, #OMAP4UART4 @ only on 44xx
cmp \rp, #OMAP4UART4 @ only on 44xx
beq 44f @ configure OMAP4UART4
cmp \rx, #ZOOM_UART @ only on zoom2/3
cmp \rp, #ZOOM_UART @ only on zoom2/3
beq 95f @ configure ZOOM_UART
/* Configure the UART offset from the phys/virt base */
21: mov \rx, #UART_OFFSET(OMAP2_UART1_BASE) @ omap2/3/4
21: mov \rp, #UART_OFFSET(OMAP2_UART1_BASE) @ omap2/3/4
b 98f
22: mov \rx, #UART_OFFSET(OMAP2_UART2_BASE) @ omap2/3/4
22: mov \rp, #UART_OFFSET(OMAP2_UART2_BASE) @ omap2/3/4
b 98f
23: mov \rx, #UART_OFFSET(OMAP2_UART3_BASE)
23: mov \rp, #UART_OFFSET(OMAP2_UART3_BASE)
b 98f
33: mov \rx, #UART_OFFSET(OMAP3_UART1_BASE)
add \rx, \rx, #0x00fb0000
add \rx, \rx, #0x00006000 @ OMAP3_UART3_BASE
33: mov \rp, #UART_OFFSET(OMAP3_UART1_BASE)
add \rp, \rp, #0x00fb0000
add \rp, \rp, #0x00006000 @ OMAP3_UART3_BASE
b 98f
34: mov \rx, #UART_OFFSET(OMAP3_UART1_BASE)
add \rx, \rx, #0x00fb0000
add \rx, \rx, #0x00028000 @ OMAP3_UART4_BASE
34: mov \rp, #UART_OFFSET(OMAP3_UART1_BASE)
add \rp, \rp, #0x00fb0000
add \rp, \rp, #0x00028000 @ OMAP3_UART4_BASE
b 98f
43: mov \rx, #UART_OFFSET(OMAP4_UART3_BASE)
43: mov \rp, #UART_OFFSET(OMAP4_UART3_BASE)
b 98f
44: mov \rx, #UART_OFFSET(OMAP4_UART4_BASE)
44: mov \rp, #UART_OFFSET(OMAP4_UART4_BASE)
b 98f
95: ldr \rx, =ZOOM_UART_BASE
mrc p15, 0, \tmp, c1, c0
tst \tmp, #1 @ MMU enabled?
ldreq \tmp, =__virt_to_phys(omap_uart_phys)
ldrne \tmp, =omap_uart_phys
str \rx, [\tmp, #0]
ldr \rx, =ZOOM_UART_VIRT
ldreq \tmp, =__virt_to_phys(omap_uart_virt)
ldrne \tmp, =omap_uart_virt
str \rx, [\tmp, #0]
mov \rx, #(UART_LSR << ZOOM_PORT_SHIFT)
ldreq \tmp, =__virt_to_phys(omap_uart_lsr)
ldrne \tmp, =omap_uart_lsr
str \rx, [\tmp, #0]
95: ldr \rp, =ZOOM_UART_BASE
mrc p15, 0, \rv, c1, c0
tst \rv, #1 @ MMU enabled?
ldreq \rv, =__virt_to_phys(omap_uart_phys) @ MMU not enabled
ldrne \rv, =omap_uart_phys @ MMU enabled
str \rp, [\rv, #0]
ldr \rp, =ZOOM_UART_VIRT
add \rv, \rv, #4 @ omap_uart_virt
str \rp, [\rv, #0]
mov \rp, #(UART_LSR << ZOOM_PORT_SHIFT)
add \rv, \rv, #4 @ omap_uart_lsr
str \rp, [\rv, #0]
b 10b
/* Store both phys and virt address for the uart */
98: add \rx, \rx, #0x48000000 @ phys base
mrc p15, 0, \tmp, c1, c0
tst \tmp, #1 @ MMU enabled?
ldreq \tmp, =__virt_to_phys(omap_uart_phys)
ldrne \tmp, =omap_uart_phys
str \rx, [\tmp, #0]
sub \rx, \rx, #0x48000000 @ phys base
add \rx, \rx, #0xfa000000 @ virt base
ldreq \tmp, =__virt_to_phys(omap_uart_virt)
ldrne \tmp, =omap_uart_virt
str \rx, [\tmp, #0]
mov \rx, #(UART_LSR << OMAP_PORT_SHIFT)
ldreq \tmp, =__virt_to_phys(omap_uart_lsr)
ldrne \tmp, =omap_uart_lsr
str \rx, [\tmp, #0]
98: add \rp, \rp, #0x48000000 @ phys base
mrc p15, 0, \rv, c1, c0
tst \rv, #1 @ MMU enabled?
ldreq \rv, =__virt_to_phys(omap_uart_phys) @ MMU not enabled
ldrne \rv, =omap_uart_phys @ MMU enabled
str \rp, [\rv, #0]
sub \rp, \rp, #0x48000000 @ phys base
add \rp, \rp, #0xfa000000 @ virt base
add \rv, \rv, #4 @ omap_uart_virt
str \rp, [\rv, #0]
mov \rp, #(UART_LSR << OMAP_PORT_SHIFT)
add \rv, \rv, #4 @ omap_uart_lsr
str \rp, [\rv, #0]
b 10b
99:
......@@ -131,9 +130,9 @@ omap_uart_lsr: .word 0
.macro busyuart,rd,rx
1001: mrc p15, 0, \rd, c1, c0
tst \rd, #1 @ MMU enabled?
ldreq \rd, =__virt_to_phys(omap_uart_lsr)
ldrne \rd, =omap_uart_lsr
tst \rd, #1 @ MMU enabled?
ldreq \rd, =__virt_to_phys(omap_uart_lsr) @ MMU not enabled
ldrne \rd, =omap_uart_lsr @ MMU enabled
ldr \rd, [\rd, #0]
ldrb \rd, [\rx, \rd]
and \rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
......
arch/arm/mach-orion5x/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -10,12 +10,11 @@
#include <mach/orion5x.h>
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =ORION5X_REGS_PHYS_BASE
ldrne \rx, =ORION5X_REGS_VIRT_BASE
orr \rx, \rx, #0x00012000
.macro addruart, rp, rv
ldr \rp, =ORION5X_REGS_PHYS_BASE
ldr \rv, =ORION5X_REGS_VIRT_BASE
orr \rp, \rp, #0x00012000
orr \rv, \rv, #0x00012000
.endm
#define UART_SHIFT 2
......
arch/arm/mach-pnx4008/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -11,12 +11,10 @@
*
*/
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
mov \rx, #0x00090000
addeq \rx, \rx, #0x40000000
addne \rx, \rx, #0xf4000000
.macro addruart, rp, rv
mov \rp, #0x00090000
add \rv, \rp, #0xf4000000 @ virtual
add \rp, \rp, #0x40000000 @ physical
.endm
#define UART_SHIFT 2
......
arch/arm/mach-pxa/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -13,12 +13,10 @@
#include "hardware.h"
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x40000000 @ physical
movne \rx, #io_p2v(0x40000000) @ virtual
orr \rx, \rx, #0x00100000
.macro addruart, rp, rv
mov \rp, #0x00100000
orr \rv, \rp, #io_p2v(0x40000000) @ virtual
orr \rp, \rp, #0x40000000 @ physical
.endm
#define UART_SHIFT 2
......
arch/arm/mach-realview/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -33,12 +33,10 @@
#error "Unknown RealView platform"
#endif
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x10000000
movne \rx, #0xfb000000 @ virtual base
orr \rx, \rx, #DEBUG_LL_UART_OFFSET
.macro addruart, rp, rv
mov \rp, #DEBUG_LL_UART_OFFSET
orr \rv, \rp, #0xfb000000 @ virtual base
orr \rp, \rp, #0x10000000 @ physical base
.endm
#include <asm/hardware/debug-pl01x.S>
arch/arm/mach-rpc/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -11,13 +11,11 @@
*
*/
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x03000000
movne \rx, #0xe0000000
orr \rx, \rx, #0x00010000
orr \rx, \rx, #0x00000fe0
.macro addruart, rp, rv
mov \rp, #0x00010000
orr \rp, \rp, #0x00000fe0
orr \rv, \rp, #0xe0000000 @ virtual
orr \rp, \rp, #0x03000000 @ physical
.endm
#define UART_SHIFT 2
......
arch/arm/mach-s3c2410/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -19,13 +19,12 @@
#define S3C2410_UART1_OFF (0x4000)
#define SHIFT_2440TXF (14-9)
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1
ldreq \rx, = S3C24XX_PA_UART
ldrne \rx, = S3C24XX_VA_UART
.macro addruart, rp, rv
ldr \rp, = S3C24XX_PA_UART
ldr \rv, = S3C24XX_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0
add \rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
add \rp, \rp, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
add \rv, \rv, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
#endif
.endm
......
arch/arm/mach-s3c24a0/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -10,13 +10,12 @@
#include <mach/map.h>
#include <plat/regs-serial.h>
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1
ldreq \rx, = S3C24XX_PA_UART
ldrne \rx, = S3C24XX_VA_UART
.macro addruart, rp, rv
ldr \rp, = S3C24XX_PA_UART
ldr \rv, = S3C24XX_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0
add \rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
add \rp, \rp, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
add \rv, \rv, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
#endif
.endm
......
arch/arm/mach-s3c64xx/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -21,13 +21,12 @@
* aligned and add in the offset when we load the value here.
*/
.macro addruart, rx, rtmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1
ldreq \rx, = S3C_PA_UART
ldrne \rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
.macro addruart, rp, rv
ldr \rp, = S3C_PA_UART
ldr \rv, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
#if CONFIG_DEBUG_S3C_UART != 0
add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
#endif
.endm
......
arch/arm/mach-s5p6442/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -15,13 +15,12 @@
#include <mach/map.h>
#include <plat/regs-serial.h>
.macro addruart, rx, rtmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1
ldreq \rx, = S3C_PA_UART
ldrne \rx, = S3C_VA_UART
.macro addruart, rp, rv
ldr \rp, = S3C_PA_UART
ldr \rv, = S3C_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0
add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
#endif
.endm
......
arch/arm/mach-s5pc100/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -22,13 +22,12 @@
* aligned and add in the offset when we load the value here.
*/
.macro addruart, rx, rtmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1
ldreq \rx, = S3C_PA_UART
ldrne \rx, = S3C_VA_UART
.macro addruart, rp, rv
ldr \rp, = S3C_PA_UART
ldr \rv, = S3C_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0
add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
#endif
.endm
......
arch/arm/mach-s5pv210/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -21,13 +21,12 @@
* aligned and add in the offset when we load the value here.
*/
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1
ldreq \rx, = S3C_PA_UART
ldrne \rx, = S3C_VA_UART
.macro addruart, rp, rv
ldr \rp, = S3C_PA_UART
ldr \rv, = S3C_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0
add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
#endif
.endm
......
arch/arm/mach-s5pv310/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -20,13 +20,12 @@
* aligned and add in the offset when we load the value here.
*/
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1
ldreq \rx, = S3C_PA_UART
ldrne \rx, = S3C_VA_UART
.macro addruart, rp, rv
ldreq \rp, = S3C_PA_UART
ldrne \rv, = S3C_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0
add \rx, \rx, #(0x10000 * CONFIG_DEBUG_S3C_UART)
add \rp, \rp, #(0x10000 * CONFIG_DEBUG_S3C_UART)
add \rv, \rv, #(0x10000 * CONFIG_DEBUG_S3C_UART)
#endif
.endm
......
arch/arm/mach-sa1100/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -12,33 +12,37 @@
*/
#include <mach/hardware.h>
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x80000000 @ physical base address
movne \rx, #0xf8000000 @ virtual address
.macro addruart, rp, rv
mrc p15, 0, \rp, c1, c0
tst \rp, #1 @ MMU enabled?
moveq \rp, #0x80000000 @ physical base address
movne \rp, #0xf8000000 @ virtual address
@ We probe for the active serial port here, coherently with
@ the comment in arch/arm/mach-sa1100/include/mach/uncompress.h.
@ We assume r1 can be clobbered.
@ see if Ser3 is active
add \rx, \rx, #0x00050000
ldr r1, [\rx, #UTCR3]
tst r1, #UTCR3_TXE
add \rp, \rp, #0x00050000
ldr \rv, [\rp, #UTCR3]
tst \rv, #UTCR3_TXE
@ if Ser3 is inactive, then try Ser1
addeq \rx, \rx, #(0x00010000 - 0x00050000)
ldreq r1, [\rx, #UTCR3]
tsteq r1, #UTCR3_TXE
addeq \rp, \rp, #(0x00010000 - 0x00050000)
ldreq \rv, [\rp, #UTCR3]
tsteq \rv, #UTCR3_TXE
@ if Ser1 is inactive, then try Ser2
addeq \rx, \rx, #(0x00030000 - 0x00010000)
ldreq r1, [\rx, #UTCR3]
tsteq r1, #UTCR3_TXE
addeq \rp, \rp, #(0x00030000 - 0x00010000)
ldreq \rv, [\rp, #UTCR3]
tsteq \rv, #UTCR3_TXE
@ clear top bits, and generate both phys and virt addresses
lsl \rp, \rp, #8
lsr \rp, \rp, #8
orr \rv, \rp, #0xf8000000 @ virtual
orr \rp, \rp, #0x80000000 @ physical
@ if all ports are inactive, then there is nothing we can do
moveq pc, lr
.endm
.macro senduart,rd,rx
......
arch/arm/mach-shark/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -11,9 +11,10 @@
*
*/
.macro addruart, rx, tmp
mov \rx, #0xe0000000
orr \rx, \rx, #0x000003f8
.macro addruart, rp, rv
mov \rp, #0xe0000000
orr \rp, \rp, #0x000003f8
mov \rv, \rp
.endm
.macro senduart,rd,rx
......
arch/arm/mach-tegra/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -20,24 +20,28 @@
#include <mach/io.h>
.macro addruart,rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =IO_APB_PHYS @ physical
ldrne \rx, =IO_APB_VIRT @ virtual
.macro addruart, rp, rv
ldreq \rp, =IO_APB_PHYS @ physical
ldrne \rv, =IO_APB_VIRT @ virtual
#if defined(CONFIG_TEGRA_DEBUG_UART_NONE)
#error "A debug UART must be selected in the kernel config to use DEBUG_LL"
#elif defined(CONFIG_TEGRA_DEBUG_UARTA)
orr \rx, \rx, #0x6000
orr \rp, \rp, #0x6000
orr \rv, \rv, #0x6000
#elif defined(CONFIG_TEGRA_DEBUG_UARTB)
ldr \tmp, =0x6040
orr \rx, \rx, \tmp
orr \rp, \rp, #0x6000
orr \rp, \rp, #0x40
orr \rv, \rv, #0x6000
orr \rv, \rv, #0x40
#elif defined(CONFIG_TEGRA_DEBUG_UARTC)
orr \rx, \rx, #0x6200
orr \rp, \rp, #0x6200
orr \rv, \rv, #0x6200
#elif defined(CONFIG_TEGRA_DEBUG_UARTD)
orr \rx, \rx, #0x6300
orr \rp, \rp, #0x6300
orr \rv, \rv, #0x6300
#elif defined(CONFIG_TEGRA_DEBUG_UARTE)
orr \rx, \rx, #0x6400
orr \rp, \rp, #0x6400
orr \rv, \rv, #0x6400
#endif
.endm
......
arch/arm/mach-u300/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -10,13 +10,12 @@
*/
#include <mach/hardware.h>
.macro addruart, rx, tmp
.macro addruart, rp, rv
/* If we move the address using MMU, use this. */
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address
ldrne \rx, = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address
orr \rx, \rx, #0x00003000
ldr \rp, = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address
ldr \rv, = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address
orr \rp, \rp, #0x00003000
orr \rv, \rv, #0x00003000
.endm
#include <asm/hardware/debug-pl01x.S>
arch/arm/mach-ux500/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -18,11 +18,9 @@
#define UX500_UART(n) __UX500_UART(n)
#define UART_BASE UX500_UART(CONFIG_UX500_DEBUG_UART)
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =UART_BASE @ no, physical address
ldrne \rx, =IO_ADDRESS(UART_BASE) @ yes, virtual address
.macro addruart, rp, rv
ldr \rp, =UART_BASE @ no, physical address
ldr \rv, =IO_ADDRESS(UART_BASE) @ yes, virtual address
.endm
#include <asm/hardware/debug-pl01x.S>
arch/arm/mach-versatile/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -11,13 +11,11 @@
*
*/
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x10000000
movne \rx, #0xf1000000 @ virtual base
orr \rx, \rx, #0x001F0000
orr \rx, \rx, #0x00001000
.macro addruart, rp, rv
mov \rp, #0x001F0000
orr \rp, \rp, #0x00001000
orr \rv, \rp, #0xf1000000 @ virtual base
orr \rp, \rp, #0x10000000 @ physical base
.endm
#include <asm/hardware/debug-pl01x.S>
arch/arm/mach-vexpress/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -12,12 +12,10 @@
#define DEBUG_LL_UART_OFFSET 0x00009000
.macro addruart,rx,tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x10000000
movne \rx, #0xf8000000 @ virtual base
orr \rx, \rx, #DEBUG_LL_UART_OFFSET
.macro addruart,rp,rv
mov \rp, #DEBUG_LL_UART_OFFSET
orr \rv, \rp, #0xf8000000 @ virtual base
orr \rp, \rp, #0x10000000 @ physical base
.endm
#include <asm/hardware/debug-pl01x.S>
arch/arm/plat-mxc/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -62,11 +62,9 @@
#define UART_PADDR MXC91231_UART2_BASE_ADDR
#define UART_VADDR MXC91231_IO_ADDRESS(MXC91231_UART2_BASE_ADDR)
#endif
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =UART_PADDR @ physical
ldrne \rx, =UART_VADDR @ virtual
.macro addruart, rp, rv
ldr \rp, =UART_PADDR @ physical
ldr \rv, =UART_VADDR @ virtual
.endm
.macro senduart,rd,rx
......
arch/arm/plat-spear/include/plat/debug-macro.S
View file @ 0ea12930
......@@ -14,11 +14,9 @@
#include <linux/amba/serial.h>
#include <mach/spear.h>
.macro addruart, rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #SPEAR_DBG_UART_BASE @ Physical base
movne \rx, #VA_SPEAR_DBG_UART_BASE @ Virtual base
.macro addruart, rp, rv
mov \rp, #SPEAR_DBG_UART_BASE @ Physical base
mov \rv, #VA_SPEAR_DBG_UART_BASE @ Virtual base
.endm
.macro senduart, rd, rx
......
arch/arm/plat-stmp3xxx/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -16,13 +16,10 @@
* http://www.gnu.org/copyleft/gpl.html
*/
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x80000000 @ physical base address
addeq \rx, \rx, #0x00070000
movne \rx, #0xf0000000 @ virtual base
addne \rx, \rx, #0x00070000
.macro addruart, rp, rv
mov \rp, #0x00070000
add \rv, \rp, #0xf0000000 @ virtual base
add \rp, \rp, #0x80000000 @ physical base
.endm
.macro senduart,rd,rx
......
arch/arm/plat-tcc/include/mach/debug-macro.S
View file @ 0ea12930
......@@ -9,12 +9,11 @@
*
*/
.macro addruart,rx,tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x90000000 @ physical base address
movne \rx, #0xF1000000 @ virtual base
orr \rx, \rx, #0x00007000 @ UART0
.macro addruart, rp, rv
moveq \rp, #0x90000000 @ physical base address
movne \rv, #0xF1000000 @ virtual base
orr \rp, \rp, #0x00007000 @ UART0
orr \rv, \rv, #0x00007000 @ UART0
.endm
.macro senduart,rd,rx
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7