staging: comedi: rtd520: remove RtdFifoStatus macro

This macro uses the 'devpriv' macro which relies on a local variable
having a specific name. Plus it's just a wrapper around a simple
'readl'. Remove the macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/comedi/drivers/rtd520.c

@@ -406,10 +406,6 @@ struct rtdPrivate {
 
 /* Macros to access registers */
 
-/* FIFO status */
-#define RtdFifoStatus(dev) \
-	readl(devpriv->las0+LAS0_ADC)
-
 /* pacer start/stop read=start, write=stop*/
 #define RtdPacerStart(dev) \
 	readl(devpriv->las0+LAS0_PACER)
@@ -760,7 +756,7 @@ static int rtd520_probe_fifo_depth(struct comedi_device *dev)
 		/* trigger conversion */
 		writew(0, devpriv->las0 + LAS0_ADC);
 		udelay(1);
-		fifo_status = RtdFifoStatus(dev);
+		fifo_status = readl(devpriv->las0 + LAS0_ADC);
 		if ((fifo_status & FS_ADC_HEMPTY) == 0) {
 			fifo_size = 2 * i;
 			break;
@@ -812,7 +808,7 @@ static int rtd_ai_rinsn(struct comedi_device *dev,
 		writew(0, devpriv->las0 + LAS0_ADC);
 
 		for (ii = 0; ii < RTD_ADC_TIMEOUT; ++ii) {
-			stat = RtdFifoStatus(dev);
+			stat = readl(devpriv->las0 + LAS0_ADC);
 			if (stat & FS_ADC_NOT_EMPTY)	/* 1 -> not empty */
 				break;
 			WAIT_QUIETLY;
@@ -859,7 +855,7 @@ static int ai_read_n(struct comedi_device *dev, struct comedi_subdevice *s,
 			continue;
 		}
 #if 0
-		if (0 == (RtdFifoStatus(dev) & FS_ADC_NOT_EMPTY)) {	/* DEBUG */
+		if (!(readl(devpriv->las0 + LAS0_ADC) & FS_ADC_NOT_EMPTY)) {
 			DPRINTK("comedi: READ OOPS on %d of %d\n", ii + 1,
 				count);
 			break;
@@ -888,7 +884,7 @@ static int ai_read_n(struct comedi_device *dev, struct comedi_subdevice *s,
 */
 static int ai_read_dregs(struct comedi_device *dev, struct comedi_subdevice *s)
 {
-	while (RtdFifoStatus(dev) & FS_ADC_NOT_EMPTY) {	/* 1 -> not empty */
+	while (readl(devpriv->las0 + LAS0_ADC) & FS_ADC_NOT_EMPTY) {
 		short sample;
 		s16 d = readw(devpriv->las1 + LAS1_ADC_FIFO);
 
@@ -1048,7 +1044,7 @@ static irqreturn_t rtd_interrupt(int irq,	/* interrupt number (ignored) */
 
 	devpriv->intCount++;	/* DEBUG statistics */
 
-	fifoStatus = RtdFifoStatus(dev);
+	fifoStatus = readl(devpriv->las0 + LAS0_ADC);
 	/* check for FIFO full, this automatically halts the ADC! */
 	if (!(fifoStatus & FS_ADC_NOT_FULL)) {	/* 0 -> full */
 		DPRINTK("rtd520: FIFO full! fifo_status=0x%x\n", (fifoStatus ^ 0x6666) & 0x7777);	/* should be all 0s */
@@ -1176,7 +1172,7 @@ static irqreturn_t rtd_interrupt(int irq,	/* interrupt number (ignored) */
 #endif /* USE_DMA */
 
 	if (devpriv->aiCount > 0) {	/* there shouldn't be anything left */
-		fifoStatus = RtdFifoStatus(dev);
+		fifoStatus = readl(devpriv->las0 + LAS0_ADC);
 		DPRINTK("rtd520: Finishing up. %ld remain, fifoStat=%x\n", devpriv->aiCount, (fifoStatus ^ 0x6666) & 0x7777);	/* should read all 0s */
 		ai_read_dregs(dev, s);	/* read anything left in FIFO */
 	}
@@ -1189,7 +1185,7 @@ static irqreturn_t rtd_interrupt(int irq,	/* interrupt number (ignored) */
 	RtdInterruptClearMask(dev, status);
 	RtdInterruptClear(dev);
 
-	fifoStatus = RtdFifoStatus(dev);	/* DEBUG */
+	fifoStatus = readl(devpriv->las0 + LAS0_ADC);
 	DPRINTK
 	    ("rtd520: Acquisition complete. %ld ints, intStat=%x, overStat=%x\n",
 	     devpriv->intCount, status,
@@ -1687,7 +1683,7 @@ static int rtd_ao_winsn(struct comedi_device *dev,
 		devpriv->aoValue[chan] = data[i];	/* save for read back */
 
 		for (ii = 0; ii < RTD_DAC_TIMEOUT; ++ii) {
-			stat = RtdFifoStatus(dev);
+			stat = readl(devpriv->las0 + LAS0_ADC);
 			/* 1 -> not empty */
 			if (stat & ((0 == chan) ? FS_DAC1_NOT_EMPTY :
 				    FS_DAC2_NOT_EMPTY))