Commit 0f586fbf authored by Josh Cartwright's avatar Josh Cartwright Committed by Michal Simek

ARM: zynq: use zynq clk bindings

Make the Zynq platform use the newly created zynq clk bindings.
Signed-off-by: default avatarJosh Cartwright <josh.cartwright@ni.com>
Acked-by: default avatarMichal Simek <michal.simek@xilinx.com>
parent 45aa2c27
......@@ -959,6 +959,7 @@ config ARCH_ZYNQ
bool "Xilinx Zynq ARM Cortex A9 Platform"
select ARM_AMBA
select ARM_GIC
select COMMON_CLK
select CPU_V7
select GENERIC_CLOCKEVENTS
select ICST
......
......@@ -53,5 +53,61 @@ uart1: uart@e0001000 {
interrupts = <0 50 4>;
clock = <50000000>;
};
slcr: slcr@f8000000 {
compatible = "xlnx,zynq-slcr";
reg = <0xF8000000 0x1000>;
clocks {
#address-cells = <1>;
#size-cells = <0>;
ps_clk: ps_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
/* clock-frequency set in board-specific file */
clock-output-names = "ps_clk";
};
armpll: armpll {
#clock-cells = <0>;
compatible = "xlnx,zynq-pll";
clocks = <&ps_clk>;
reg = <0x100 0x110>;
clock-output-names = "armpll";
};
ddrpll: ddrpll {
#clock-cells = <0>;
compatible = "xlnx,zynq-pll";
clocks = <&ps_clk>;
reg = <0x104 0x114>;
clock-output-names = "ddrpll";
};
iopll: iopll {
#clock-cells = <0>;
compatible = "xlnx,zynq-pll";
clocks = <&ps_clk>;
reg = <0x108 0x118>;
clock-output-names = "iopll";
};
uart_clk: uart_clk {
#clock-cells = <1>;
compatible = "xlnx,zynq-periph-clock";
clocks = <&iopll &armpll &ddrpll>;
reg = <0x154>;
clock-output-names = "uart0_ref_clk",
"uart1_ref_clk";
};
cpu_clk: cpu_clk {
#clock-cells = <1>;
compatible = "xlnx,zynq-cpu-clock";
clocks = <&iopll &armpll &ddrpll>;
reg = <0x120 0x1C4>;
clock-output-names = "cpu_6x4x",
"cpu_3x2x",
"cpu_2x",
"cpu_1x";
};
};
};
};
};
......@@ -28,3 +28,7 @@ chosen {
};
};
&ps_clk {
clock-frequency = <33333330>;
};
......@@ -19,6 +19,8 @@
#include <linux/cpumask.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/clk/zynq.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/of.h>
......@@ -96,6 +98,15 @@ static struct map_desc io_desc[] __initdata = {
static void __init xilinx_zynq_timer_init(void)
{
struct device_node *np;
void __iomem *slcr;
np = of_find_compatible_node(NULL, NULL, "xlnx,zynq-slcr");
slcr = of_iomap(np, 0);
WARN_ON(!slcr);
xilinx_zynq_clocks_init(slcr);
xttcpss_timer_init();
}
......
......@@ -19,6 +19,7 @@ endif
obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1x.o
obj-$(CONFIG_ARCH_U8500) += ux500/
obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o
obj-$(CONFIG_ARCH_ZYNQ) += clk-zynq.o
# Chip specific
obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment