arm64: dts: qcom: apq8016-sbc-d3-camera: Use more generic node names

Add "regulator" to the node names of the fixed regulators, and drop the
"_rear" part of the camera node name since it is not part of the class
of the device (which is simply "camera").
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20230922-apq8016-sbc-camera-dtso-v1-1-ce9451895ca1@gerhold.netSigned-off-by: Bjorn Andersson <andersson@kernel.org>

arch/arm64/boot/dts/qcom/apq8016-sbc-d3-camera-mezzanine.dts

@@ -9,7 +9,7 @@
 #include "apq8016-sbc.dts"
 
 / {
-	camera_vdddo_1v8: camera-vdddo-1v8 {
+	camera_vdddo_1v8: regulator-camera-vdddo {
 		compatible = "regulator-fixed";
 		regulator-name = "camera_vdddo";
 		regulator-min-microvolt = <1800000>;
@@ -17,7 +17,7 @@ camera_vdddo_1v8: camera-vdddo-1v8 {
 		regulator-always-on;
 	};
 
-	camera_vdda_2v8: camera-vdda-2v8 {
+	camera_vdda_2v8: regulator-camera-vdda {
 		compatible = "regulator-fixed";
 		regulator-name = "camera_vdda";
 		regulator-min-microvolt = <2800000>;
@@ -25,7 +25,7 @@ camera_vdda_2v8: camera-vdda-2v8 {
 		regulator-always-on;
 	};
 
-	camera_vddd_1v5: camera-vddd-1v5 {
+	camera_vddd_1v5: regulator-camera-vddd {
 		compatible = "regulator-fixed";
 		regulator-name = "camera_vddd";
 		regulator-min-microvolt = <1500000>;
@@ -53,7 +53,7 @@ &cci {
 };
 
 &cci_i2c0 {
-	camera_rear@3b {
+	camera@3b {
 		compatible = "ovti,ov5640";
 		reg = <0x3b>;