regulator: bd71828: Don't overwrite runtime voltages
Some of the regulators on the BD71828 have common voltage setting for RUN/SUSPEND/IDLE/LPSR states. The enable control can be set for each state though. The driver allows setting the voltage values for these states via device-tree. As a side effect, setting the voltages for SUSPEND/IDLE/LPSR will also change the RUN level voltage which is not desired and can break the system. The comment in code reflects this behaviour, but it is likely to not make people any happier. The right thing to do is to allow setting the enable/disable state at SUSPEND/IDLE/LPSR via device-tree, but to disallow setting state specific voltages for those regulators. BUCK1 is a bit different. It only shares the SUSPEND and LPSR state voltages. The former behaviour of allowing to silently overwrite the SUSPEND state voltage by LPSR state voltage is also changed here so that the SUSPEND voltage is prioritized over LPSR voltage. Prevent setting PMIC state specific voltages for regulators which do not support it. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Fixes: 522498f8 ("regulator: bd71828: Basic support for ROHM bd71828 PMIC regulators") Link: https://msgid.link/r/e1883ae1e3ae5668f1030455d4750923561f3d68.1715848512.git.mazziesaccount@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
Showing
Please register or sign in to comment