Commit 1026bb35 authored by Shreeya Patel's avatar Shreeya Patel Committed by Jonathan Cameron

Staging: iio: adis16209: Change some macro names

Make some of the macro names according to the names
given in the datasheet of the adis16209 driver.
Signed-off-by: default avatarShreeya Patel <shreeya.patel23498@gmail.com>
Signed-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
parent f3cfe187
......@@ -68,21 +68,21 @@
#define ADIS16209_MSC_CTRL_ACTIVE_HIGH BIT(1)
#define ADIS16209_MSC_CTRL_DATA_RDY_DIO2 BIT(0)
#define ADIS16209_DIAG_STAT_REG 0x3C
#define ADIS16209_DIAG_STAT_ALARM2 BIT(9)
#define ADIS16209_DIAG_STAT_ALARM1 BIT(8)
#define ADIS16209_DIAG_STAT_SELFTEST_FAIL_BIT 5
#define ADIS16209_DIAG_STAT_SPI_FAIL_BIT 3
#define ADIS16209_DIAG_STAT_FLASH_UPT_BIT 2
#define ADIS16209_STAT_REG 0x3C
#define ADIS16209_STAT_ALARM2 BIT(9)
#define ADIS16209_STAT_ALARM1 BIT(8)
#define ADIS16209_STAT_SELFTEST_FAIL_BIT 5
#define ADIS16209_STAT_SPI_FAIL_BIT 3
#define ADIS16209_STAT_FLASH_UPT_FAIL_BIT 2
/* Power supply above 3.625 V */
#define ADIS16209_DIAG_STAT_POWER_HIGH_BIT 1
#define ADIS16209_STAT_POWER_HIGH_BIT 1
/* Power supply below 3.15 V */
#define ADIS16209_DIAG_STAT_POWER_LOW_BIT 0
#define ADIS16209_STAT_POWER_LOW_BIT 0
#define ADIS16209_GLOB_CMD_REG 0x3E
#define ADIS16209_GLOB_CMD_SW_RESET BIT(7)
#define ADIS16209_GLOB_CMD_CLEAR_STAT BIT(4)
#define ADIS16209_GLOB_CMD_FACTORY_CAL BIT(1)
#define ADIS16209_CMD_REG 0x3E
#define ADIS16209_CMD_SW_RESET BIT(7)
#define ADIS16209_CMD_CLEAR_STAT BIT(4)
#define ADIS16209_CMD_FACTORY_CAL BIT(1)
#define ADIS16209_ERROR_ACTIVE BIT(14)
......@@ -238,29 +238,29 @@ static const struct iio_info adis16209_info = {
};
static const char * const adis16209_status_error_msgs[] = {
[ADIS16209_DIAG_STAT_SELFTEST_FAIL_BIT] = "Self test failure",
[ADIS16209_DIAG_STAT_SPI_FAIL_BIT] = "SPI failure",
[ADIS16209_DIAG_STAT_FLASH_UPT_BIT] = "Flash update failed",
[ADIS16209_DIAG_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
[ADIS16209_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 3.15V",
[ADIS16209_STAT_SELFTEST_FAIL_BIT] = "Self test failure",
[ADIS16209_STAT_SPI_FAIL_BIT] = "SPI failure",
[ADIS16209_STAT_FLASH_UPT_FAIL_BIT] = "Flash update failed",
[ADIS16209_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
[ADIS16209_STAT_POWER_LOW_BIT] = "Power supply below 3.15V",
};
static const struct adis_data adis16209_data = {
.read_delay = 30,
.msc_ctrl_reg = ADIS16209_MSC_CTRL_REG,
.glob_cmd_reg = ADIS16209_GLOB_CMD_REG,
.diag_stat_reg = ADIS16209_DIAG_STAT_REG,
.glob_cmd_reg = ADIS16209_CMD_REG,
.diag_stat_reg = ADIS16209_STAT_REG,
.self_test_mask = ADIS16209_MSC_CTRL_SELF_TEST_EN,
.self_test_no_autoclear = true,
.startup_delay = ADIS16209_STARTUP_DELAY_MS,
.status_error_msgs = adis16209_status_error_msgs,
.status_error_mask = BIT(ADIS16209_DIAG_STAT_SELFTEST_FAIL_BIT) |
BIT(ADIS16209_DIAG_STAT_SPI_FAIL_BIT) |
BIT(ADIS16209_DIAG_STAT_FLASH_UPT_BIT) |
BIT(ADIS16209_DIAG_STAT_POWER_HIGH_BIT) |
BIT(ADIS16209_DIAG_STAT_POWER_LOW_BIT),
.status_error_mask = BIT(ADIS16209_STAT_SELFTEST_FAIL_BIT) |
BIT(ADIS16209_STAT_SPI_FAIL_BIT) |
BIT(ADIS16209_STAT_FLASH_UPT_FAIL_BIT) |
BIT(ADIS16209_STAT_POWER_HIGH_BIT) |
BIT(ADIS16209_STAT_POWER_LOW_BIT),
};
static int adis16209_probe(struct spi_device *spi)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment