Commit 106cb09a authored by Rafał Miłecki's avatar Rafał Miłecki Committed by John W. Linville

b43: define B43_SHM_SH_CHAN_40MHZ

Signed-off-by: default avatarRafał Miłecki <zajec5@gmail.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 5e7ee098
......@@ -186,7 +186,8 @@ enum {
#define B43_SHM_SH_PHYTXNOI 0x006E /* PHY noise directly after TX (lower 8bit only) */
#define B43_SHM_SH_RFRXSP1 0x0072 /* RF RX SP Register 1 */
#define B43_SHM_SH_CHAN 0x00A0 /* Current channel (low 8bit only) */
#define B43_SHM_SH_CHAN_5GHZ 0x0100 /* Bit set, if 5Ghz channel */
#define B43_SHM_SH_CHAN_5GHZ 0x0100 /* Bit set, if 5 Ghz channel */
#define B43_SHM_SH_CHAN_40MHZ 0x0200 /* Bit set, if 40 Mhz channel width */
#define B43_SHM_SH_BCMCFIFOID 0x0108 /* Last posted cookie to the bcast/mcast FIFO */
/* TSSI information */
#define B43_SHM_SH_TSSI_CCK 0x0058 /* TSSI for last 4 CCK frames (32bit) */
......
......@@ -294,8 +294,10 @@ int b43_switch_channel(struct b43_wldev *dev, unsigned int new_channel)
*/
channelcookie = new_channel;
if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ)
channelcookie |= 0x100;
//FIXME set 40Mhz flag if required
channelcookie |= B43_SHM_SH_CHAN_5GHZ;
/* FIXME: set 40Mhz flag if required */
if (0)
channelcookie |= B43_SHM_SH_CHAN_40MHZ;
savedcookie = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_CHAN);
b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_CHAN, channelcookie);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment