Merge commit 'v2.6.30-rc6' into tracing/core

Merge reason: we were on an -rc4 base, sync up to -rc6
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Documentation/DocBook/kgdb.tmpl

@@ -281,7 +281,7 @@
     seriously wrong while debugging, it will most often be the case
     that you want to enable gdb to be verbose about its target
     communications.  You do this prior to issuing the <constant>target
-    remote</constant> command by typing in: <constant>set remote debug 1</constant>
+    remote</constant> command by typing in: <constant>set debug remote 1</constant>
     </para>
   </chapter>
   <chapter id="KGDBTestSuite">

Documentation/kernel-parameters.txt

@@ -17,6 +17,12 @@ are specified on the kernel command line with the module name plus
 
 	usbcore.blinkenlights=1
 
+Hyphens (dashes) and underscores are equivalent in parameter names, so
+	log_buf_len=1M print-fatal-signals=1
+can also be entered as
+	log-buf-len=1M print_fatal_signals=1
+
+
 This document may not be entirely up to date and comprehensive. The command
 "modinfo -p ${modulename}" shows a current list of all parameters of a loadable
 module. Loadable modules, after being loaded into the running kernel, also
@@ -345,7 +351,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			not play well with APC CPU idle - disable it if you have
 			APC and your system crashes randomly.
 
-	apic=		[APIC,i386] Advanced Programmable Interrupt Controller
+	apic=		[APIC,X86-32] Advanced Programmable Interrupt Controller
 			Change the output verbosity whilst booting
 			Format: { quiet (default) | verbose | debug }
 			Change the amount of debugging information output
@@ -702,7 +708,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			to discrete, to make X server driver able to add WB
 			entry later. This parameter enables that.
 
-	enable_timer_pin_1 [i386,x86-64]
+	enable_timer_pin_1 [X86]
 			Enable PIN 1 of APIC timer
 			Can be useful to work around chipset bugs
 			(in particular on some ATI chipsets).
@@ -775,7 +781,7 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	hashdist=	[KNL,NUMA] Large hashes allocated during boot
 			are distributed across NUMA nodes.  Defaults on
-			for IA-64, off otherwise.
+			for 64bit NUMA, off otherwise.
 			Format: 0 | 1 (for off | on)
 
 	hcl=		[IA-64] SGI's Hardware Graph compatibility layer

Documentation/sysctl/vm.txt

@@ -39,8 +39,6 @@ Currently, these files are in /proc/sys/vm:
 - nr_hugepages
 - nr_overcommit_hugepages
 - nr_pdflush_threads
-- nr_pdflush_threads_min
-- nr_pdflush_threads_max
 - nr_trim_pages         (only if CONFIG_MMU=n)
 - numa_zonelist_order
 - oom_dump_tasks
@@ -469,32 +467,6 @@ The default value is 0.
 
 ==============================================================
 
-nr_pdflush_threads_min
-
-This value controls the minimum number of pdflush threads.
-
-At boot time, the kernel will create and maintain 'nr_pdflush_threads_min'
-threads for the kernel's lifetime.
-
-The default value is 2.  The minimum value you can specify is 1, and
-the maximum value is the current setting of 'nr_pdflush_threads_max'.
-
-See 'nr_pdflush_threads_max' below for more information.
-
-==============================================================
-
-nr_pdflush_threads_max
-
-This value controls the maximum number of pdflush threads that can be
-created.  The pdflush algorithm will create a new pdflush thread (up to
-this maximum) if no pdflush threads have been available for >= 1 second.
-
-The default value is 8.  The minimum value you can specify is the
-current value of 'nr_pdflush_threads_min' and the
-maximum is 1000.
-
-==============================================================
-
 overcommit_memory:
 
 This value contains a flag that enables memory overcommitment.

Documentation/sysfs-rules.txt

@@ -113,7 +113,7 @@ versions of the sysfs interface.
   "devices" directory at /sys/subsystem/<name>/devices.
 
   If /sys/subsystem exists, /sys/bus, /sys/class and /sys/block can be
-  ignored. If it does not exist, you have always to scan all three
+  ignored. If it does not exist, you always have to scan all three
   places, as the kernel is free to move a subsystem from one place to
   the other, as long as the devices are still reachable by the same
   subsystem name.

Makefile

 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 30
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc6
 NAME = Vindictive Armadillo
 
 # *DOCUMENTATION*

arch/alpha/include/asm/percpu.h

 #ifndef __ALPHA_PERCPU_H
 #define __ALPHA_PERCPU_H
+
 #include <linux/compiler.h>
 #include <linux/threads.h>
+#include <linux/percpu-defs.h>
 
 /*
  * Determine the real variable name from the name visible in the
@@ -73,6 +75,28 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
 
 #endif /* SMP */
 
-#include <asm-generic/percpu.h>
+#ifdef CONFIG_SMP
+#define PER_CPU_BASE_SECTION ".data.percpu"
+#else
+#define PER_CPU_BASE_SECTION ".data"
+#endif
+
+#ifdef CONFIG_SMP
+
+#ifdef MODULE
+#define PER_CPU_SHARED_ALIGNED_SECTION ""
+#else
+#define PER_CPU_SHARED_ALIGNED_SECTION ".shared_aligned"
+#endif
+#define PER_CPU_FIRST_SECTION ".first"
+
+#else
+
+#define PER_CPU_SHARED_ALIGNED_SECTION ""
+#define PER_CPU_FIRST_SECTION ""
+
+#endif
+
+#define PER_CPU_ATTRIBUTES
 
 #endif /* __ALPHA_PERCPU_H */

arch/arm/Kconfig

@@ -454,6 +454,7 @@ config ARCH_MXC
 	select ARCH_MTD_XIP
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
+	select HAVE_CLK
 	help
 	  Support for Freescale MXC/iMX-based family of processors
 

arch/arm/configs/mx3_defconfig

@@ -197,7 +197,7 @@ CONFIG_MXC_PWM=y
 #
 CONFIG_CPU_32=y
 CONFIG_CPU_V6=y
-CONFIG_CPU_32v6K=y
+# CONFIG_CPU_32v6K is not set
 CONFIG_CPU_32v6=y
 CONFIG_CPU_ABRT_EV6=y
 CONFIG_CPU_PABRT_NOIFAR=y

arch/arm/include/asm/elf.h

@@ -45,13 +45,15 @@ typedef struct user_fp elf_fpregset_t;
 #define EF_ARM_HASENTRY		0x00000002	/* All */
 #define EF_ARM_RELEXEC		0x00000001	/* All */
 
-#define R_ARM_NONE	0
-#define R_ARM_PC24	1
-#define R_ARM_ABS32	2
-#define R_ARM_CALL	28
-#define R_ARM_JUMP24	29
-#define R_ARM_V4BX	40
-#define R_ARM_PREL31	42
+#define R_ARM_NONE		0
+#define R_ARM_PC24		1
+#define R_ARM_ABS32		2
+#define R_ARM_CALL		28
+#define R_ARM_JUMP24		29
+#define R_ARM_V4BX		40
+#define R_ARM_PREL31		42
+#define R_ARM_MOVW_ABS_NC	43
+#define R_ARM_MOVT_ABS		44
 
 /*
  * These are used to set parameters in the core dumps.

arch/arm/kernel/module.c

@@ -169,6 +169,21 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 			*(u32 *)loc = offset & 0x7fffffff;
 			break;
 
+		case R_ARM_MOVW_ABS_NC:
+		case R_ARM_MOVT_ABS:
+			offset = *(u32 *)loc;
+			offset = ((offset & 0xf0000) >> 4) | (offset & 0xfff);
+			offset = (offset ^ 0x8000) - 0x8000;
+
+			offset += sym->st_value;
+			if (ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_ABS)
+				offset >>= 16;
+
+			*(u32 *)loc &= 0xfff0f000;
+			*(u32 *)loc |= ((offset & 0xf000) << 4) |
+					(offset & 0x0fff);
+			break;
+
 		default:
 			printk(KERN_ERR "%s: unknown relocation: %u\n",
 			       module->name, ELF32_R_TYPE(rel->r_info));

arch/arm/mach-davinci/board-dm644x-evm.c

@@ -211,7 +211,7 @@ static struct resource ide_resources[] = {
 	},
 };
 
-static u64 ide_dma_mask = DMA_32BIT_MASK;
+static u64 ide_dma_mask = DMA_BIT_MASK(32);
 
 static struct platform_device ide_dev = {
 	.name           = "palm_bk3710",
@@ -220,7 +220,7 @@ static struct platform_device ide_dev = {
 	.num_resources  = ARRAY_SIZE(ide_resources),
 	.dev = {
 		.dma_mask		= &ide_dma_mask,
-		.coherent_dma_mask      = DMA_32BIT_MASK,
+		.coherent_dma_mask      = DMA_BIT_MASK(32),
 	},
 };
 

arch/arm/mach-davinci/include/mach/asp.h

+/*
+ * <mach/asp.h> - DaVinci Audio Serial Port support
+ */
+#ifndef __ASM_ARCH_DAVINCI_ASP_H
+#define __ASM_ARCH_DAVINCI_ASP_H
+
+#include <mach/irqs.h>
+
+/* Bases of register banks */
+#define DAVINCI_ASP0_BASE	0x01E02000
+#define DAVINCI_ASP1_BASE	0x01E04000
+
+/* EDMA channels */
+#define DAVINCI_DMA_ASP0_TX	2
+#define DAVINCI_DMA_ASP0_RX	3
+#define DAVINCI_DMA_ASP1_TX	8
+#define DAVINCI_DMA_ASP1_RX	9
+
+/* Interrupts */
+#define DAVINCI_ASP0_RX_INT	IRQ_MBRINT
+#define DAVINCI_ASP0_TX_INT	IRQ_MBXINT
+#define DAVINCI_ASP1_RX_INT	IRQ_MBRINT
+#define DAVINCI_ASP1_TX_INT	IRQ_MBXINT
+
+#endif /* __ASM_ARCH_DAVINCI_ASP_H */

arch/arm/mach-ixp4xx/ixp4xx_npe.c

@@ -714,7 +714,7 @@ static int __init npe_init_module(void)
 	}
 
 	if (!found)
-		return -ENOSYS;
+		return -ENODEV;
 	return 0;
 }
 

arch/arm/mach-pxa/Kconfig

@@ -289,12 +289,12 @@ config MACH_LITTLETON
 config MACH_TAVOREVB
 	bool "PXA930 Evaluation Board (aka TavorEVB)"
 	select PXA3xx
-	select PXA930
+	select CPU_PXA930
 
 config MACH_SAAR
 	bool "PXA930 Handheld Platform (aka SAAR)"
 	select PXA3xx
-	select PXA930
+	select CPU_PXA930
 
 config MACH_ARMCORE
 	bool "CompuLab CM-X255/CM-X270 modules"

arch/arm/mach-s3c2412/pm.c

@@ -21,6 +21,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
+#include <asm/cacheflush.h>
 #include <asm/irq.h>
 
 #include <mach/regs-power.h>
@@ -39,6 +40,8 @@ static void s3c2412_cpu_suspend(void)
 {
 	unsigned long tmp;
 
+	flush_cache_all();
+
 	/* set our standby method to sleep */
 
 	tmp = __raw_readl(S3C2412_PWRCFG);

arch/arm/mach-s3c6400/include/mach/map.h

@@ -40,6 +40,8 @@
 
 #define S3C64XX_PA_FB		(0x77100000)
 #define S3C64XX_PA_SYSCON	(0x7E00F000)
+#define S3C64XX_PA_IIS0		(0x7F002000)
+#define S3C64XX_PA_IIS1		(0x7F003000)
 #define S3C64XX_PA_TIMER	(0x7F006000)
 #define S3C64XX_PA_IIC0		(0x7F004000)
 #define S3C64XX_PA_IIC1		(0x7F00F000)

arch/arm/plat-mxc/dma-mx1-mx2.c

@@ -693,12 +693,15 @@ int imx_dma_request(int channel, const char *name)
 		local_irq_restore(flags);
 		return -EBUSY;
 	}
+	memset(imxdma, 0, sizeof(imxdma));
+	imxdma->name = name;
+	local_irq_restore(flags); /* request_irq() can block */
 
 #ifdef CONFIG_ARCH_MX2
 	ret = request_irq(MXC_INT_DMACH0 + channel, dma_irq_handler, 0, "DMA",
 			NULL);
 	if (ret) {
-		local_irq_restore(flags);
+		imxdma->name = NULL;
 		printk(KERN_CRIT "Can't register IRQ %d for DMA channel %d\n",
 				MXC_INT_DMACH0 + channel, channel);
 		return ret;
@@ -708,13 +711,6 @@ int imx_dma_request(int channel, const char *name)
 	imxdma->watchdog.data = channel;
 #endif
 
-	imxdma->name = name;
-	imxdma->irq_handler = NULL;
-	imxdma->err_handler = NULL;
-	imxdma->data = NULL;
-	imxdma->sg = NULL;
-
-	local_irq_restore(flags);
 	return ret;
 }
 EXPORT_SYMBOL(imx_dma_request);
@@ -737,10 +733,7 @@ void imx_dma_free(int channel)
 
 	local_irq_save(flags);
 	/* Disable interrupts */
-	__raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) | (1 << channel),
-		DMA_BASE + DMA_DIMR);
-	__raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) & ~CCR_CEN,
-		DMA_BASE + DMA_CCR(channel));
+	imx_dma_disable(channel);
 	imxdma->name = NULL;
 
 #ifdef CONFIG_ARCH_MX2

arch/arm/plat-mxc/gpio.c

@@ -124,7 +124,7 @@ static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
 
 	irq_stat = __raw_readl(port->base + GPIO_ISR) &
 			__raw_readl(port->base + GPIO_IMR);
-	BUG_ON(!irq_stat);
+
 	mxc_gpio_irq_handler(port, irq_stat);
 }
 #endif

arch/arm/plat-mxc/include/mach/board-mx27ads.h

@@ -47,7 +47,7 @@
 /*
  * Base address of PBC controller, CS4
  */
-#define PBC_BASE_ADDRESS        0xEB000000
+#define PBC_BASE_ADDRESS        0xf4300000
 #define PBC_REG_ADDR(offset)    (void __force __iomem *) \
 		(PBC_BASE_ADDRESS + (offset))
 

arch/cris/Makefile

@@ -70,7 +70,7 @@ SRC_ARCH              = $(srctree)/arch/cris
 # cris object files path
 OBJ_ARCH              = $(objtree)/arch/cris
 
-boot := arch/cris/$(SARCH)/boot
+boot := arch/cris/boot
 MACHINE := arch/cris/$(SARCH)
 
 all: zImage
@@ -81,15 +81,15 @@ zImage Image: vmlinux
 archprepare:
 
 archclean:
-	$(Q)if [ -e arch/cris/$(SARCH)/boot ]; then \
-		$(MAKE) $(clean)=arch/cris/$(SARCH)/boot; \
+	$(Q)if [ -e arch/cris/boot ]; then \
+		$(MAKE) $(clean)=arch/cris/boot; \
 	fi
 
 CLEAN_FILES += \
-	$(MACHINE)/boot/zImage \
-	$(MACHINE)/boot/compressed/decompress.bin \
-	$(MACHINE)/boot/compressed/piggy.gz \
-	$(MACHINE)/boot/rescue/rescue.bin
+	$(boot)/zImage \
+	$(boot)/compressed/decompress.bin \
+	$(boot)/compressed/piggy.gz \
+	$(boot)/rescue/rescue.bin
 
 
 # MRPROPER_FILES +=

arch/cris/arch-v10/boot/Makefile

-#
-# arch/cris/arch-v10/boot/Makefile
-#
-
-OBJCOPYFLAGS = -O binary --remove-section=.bss
-
-subdir- := compressed rescue
-targets := Image
-
-$(obj)/Image: vmlinux FORCE
-	$(call if_changed,objcopy)
-	@echo '  Kernel: $@ is ready'
-
-$(obj)/compressed/vmlinux: $(obj)/Image FORCE
-	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
-	$(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin
-
-$(obj)/zImage:  $(obj)/compressed/vmlinux
-	@cp $< $@
-	@echo '  Kernel: $@ is ready'

arch/cris/arch-v10/boot/compressed/README

-Creation of the self-extracting compressed kernel image (vmlinuz)
------------------------------------------------------------------
-$Id: README,v 1.1 2001/12/17 13:59:27 bjornw Exp $
-
-This can be slightly confusing because it's a process with many steps.
-
-The kernel object built by the arch/etrax100/Makefile, vmlinux, is split
-by that makefile into text and data binary files, vmlinux.text and 
-vmlinux.data.
-
-Those files together with a ROM filesystem can be catted together and
-burned into a flash or executed directly at the DRAM origin.
-
-They can also be catted together and compressed with gzip, which is what
-happens in this makefile. Together they make up piggy.img. 
-
-The decompressor is built into the file decompress.o. It is turned into
-the binary file decompress.bin, which is catted together with piggy.img
-into the file vmlinuz. It can be executed in an arbitrary place in flash.
-
-Be careful - it assumes some things about free locations in DRAM. It
-assumes the DRAM starts at 0x40000000 and that it is at least 8 MB,
-so it puts its code at 0x40700000, and initial stack at 0x40800000.
-
--Bjorn

arch/cris/arch-v10/boot/compressed/misc.c

-/*
- * misc.c
- *
- * This is a collection of several routines from gzip-1.0.3
- * adapted for Linux.
- *
- * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
- * puts by Nick Holloway 1993, better puts by Martin Mares 1995
- * adaptation for Linux/CRIS Axis Communications AB, 1999
- *
- */
-
-/* where the piggybacked kernel image expects itself to live.
- * it is the same address we use when we network load an uncompressed
- * image into DRAM, and it is the address the kernel is linked to live
- * at by vmlinux.lds.S
- */
-
-#define KERNEL_LOAD_ADR 0x40004000
-
-
-#include <linux/types.h>
-#include <arch/svinto.h>
-
-/*
- * gzip declarations
- */
-
-#define OF(args)  args
-#define STATIC static
-
-void *memset(void *s, int c, size_t n);
-void *memcpy(void *__dest, __const void *__src, size_t __n);
-
-#define memzero(s, n)     memset((s), 0, (n))
-
-typedef unsigned char  uch;
-typedef unsigned short ush;
-typedef unsigned long  ulg;
-
-#define WSIZE 0x8000		/* Window size must be at least 32k, */
-				/* and a power of two */
-
-static uch *inbuf;	     /* input buffer */
-static uch window[WSIZE];    /* Sliding window buffer */
-
-unsigned inptr = 0;	/* index of next byte to be processed in inbuf
-			 * After decompression it will contain the
-			 * compressed size, and head.S will read it.
-			 */
-
-static unsigned outcnt = 0;  /* bytes in output buffer */
-
-/* gzip flag byte */
-#define ASCII_FLAG   0x01 /* bit 0 set: file probably ascii text */
-#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
-#define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */
-#define ORIG_NAME    0x08 /* bit 3 set: original file name present */
-#define COMMENT      0x10 /* bit 4 set: file comment present */
-#define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */
-#define RESERVED     0xC0 /* bit 6,7:   reserved */
-
-#define get_byte() (inbuf[inptr++])
-
-/* Diagnostic functions */
-#ifdef DEBUG
-#  define Assert(cond, msg) do { \
-		if (!(cond)) \
-			error(msg); \
-	} while (0)
-#  define Trace(x) fprintf x
-#  define Tracev(x) do { \
-		if (verbose) \
-			fprintf x; \
-	} while (0)
-#  define Tracevv(x) do { \
-		if (verbose > 1) \
-			fprintf x; \
-	} while (0)
-#  define Tracec(c, x) do { \
-		if (verbose && (c)) \
-			fprintf x; \
-	} while (0)
-#  define Tracecv(c, x) do { \
-		if (verbose > 1 && (c)) \
-			fprintf x; \
-	} while (0)
-#else
-#  define Assert(cond, msg)
-#  define Trace(x)
-#  define Tracev(x)
-#  define Tracevv(x)
-#  define Tracec(c, x)
-#  define Tracecv(c, x)
-#endif
-
-static void flush_window(void);
-static void error(char *m);
-
-extern char *input_data;  /* lives in head.S */
-
-static long bytes_out = 0;
-static uch *output_data;
-static unsigned long output_ptr = 0;
-static void puts(const char *);
-
-/* the "heap" is put directly after the BSS ends, at end */
-
-extern int _end;
-static long free_mem_ptr = (long)&_end;
-static long free_mem_end_ptr;
-
-#include "../../../../../lib/inflate.c"
-
-/* decompressor info and error messages to serial console */
-
-static void
-puts(const char *s)
-{
-#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
-	while (*s) {
-#ifdef CONFIG_ETRAX_DEBUG_PORT0
-		while (!(*R_SERIAL0_STATUS & (1 << 5))) ;
-		*R_SERIAL0_TR_DATA = *s++;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT1
-		while (!(*R_SERIAL1_STATUS & (1 << 5))) ;
-		*R_SERIAL1_TR_DATA = *s++;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT2
-		while (!(*R_SERIAL2_STATUS & (1 << 5))) ;
-		*R_SERIAL2_TR_DATA = *s++;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT3
-		while (!(*R_SERIAL3_STATUS & (1 << 5))) ;
-		*R_SERIAL3_TR_DATA = *s++;
-#endif
-	}
-#endif
-}
-
-void *memset(void *s, int c, size_t n)
-{
-	int i;
-	char *ss = (char *)s;
-
-	for (i = 0; i < n; i++)
-		ss[i] = c;
-
-	return s;
-}
-
-void *memcpy(void *__dest, __const void *__src, size_t __n)
-{
-	int i;
-	char *d = (char *)__dest, *s = (char *)__src;
-
-	for (i = 0; i < __n; i++)
-		d[i] = s[i];
-
-	return __dest;
-}
-
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-
-static void flush_window(void)
-{
-	ulg c = crc;         /* temporary variable */
-	unsigned n;
-	uch *in, *out, ch;
-
-	in = window;
-	out = &output_data[output_ptr];
-	for (n = 0; n < outcnt; n++) {
-		ch = *out = *in;
-		out++;
-		in++;
-		c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-	}
-	crc = c;
-	bytes_out += (ulg)outcnt;
-	output_ptr += (ulg)outcnt;
-	outcnt = 0;
-}
-
-static void error(char *x)
-{
-	puts("\n\n");
-	puts(x);
-	puts("\n\n -- System halted\n");
-
-	while (1);	/* Halt */
-}
-
-void setup_normal_output_buffer(void)
-{
-	output_data = (char *)KERNEL_LOAD_ADR;
-}
-
-void decompress_kernel(void)
-{
-	char revision;
-
-	/* input_data is set in head.S */
-	inbuf = input_data;
-
-#ifdef CONFIG_ETRAX_DEBUG_PORT0
-	*R_SERIAL0_XOFF = 0;
-	*R_SERIAL0_BAUD = 0x99;
-	*R_SERIAL0_TR_CTRL = 0x40;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT1
-	*R_SERIAL1_XOFF = 0;
-	*R_SERIAL1_BAUD = 0x99;
-	*R_SERIAL1_TR_CTRL = 0x40;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT2
-	*R_GEN_CONFIG = 0x08;
-	*R_SERIAL2_XOFF = 0;
-	*R_SERIAL2_BAUD = 0x99;
-	*R_SERIAL2_TR_CTRL = 0x40;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT3
-	*R_GEN_CONFIG = 0x100;
-	*R_SERIAL3_XOFF = 0;
-	*R_SERIAL3_BAUD = 0x99;
-	*R_SERIAL3_TR_CTRL = 0x40;
-#endif
-
-	setup_normal_output_buffer();
-
-	makecrc();
-
-	__asm__ volatile ("move $vr,%0" : "=rm" (revision));
-	if (revision < 10) {
-		puts("You need an ETRAX 100LX to run linux 2.6\n");
-		while (1);
-	}
-
-	puts("Uncompressing Linux...\n");
-	gunzip();
-	puts("Done. Now booting the kernel.\n");
-}

arch/cris/arch-v10/kernel/entry.S

@@ -536,10 +536,10 @@ multiple_interrupt:
 	movem	$r13, [$sp]
 	push	$r10		; push orig_r10
 	clear.d [$sp=$sp-4]	; frametype == 0, normal frame
-	
+
 	move.d  $sp, $r10
 	jsr	do_multiple_IRQ
-	
+
 	jump    ret_from_intr
 
 do_sigtrap:
@@ -585,7 +585,7 @@ _ugdb_handle_breakpoint:
 	pop	$r0			; Restore r0. 
 	ba	do_sigtrap		; SIGTRAP the offending process. 
 	pop	$dccr			; Restore dccr in delay slot.
-	
+
 	.global kernel_execve
 kernel_execve:
 	move.d __NR_execve, $r9
@@ -929,6 +929,14 @@ sys_call_table:
 	.long sys_fallocate
 	.long sys_timerfd_settime	/* 325 */
 	.long sys_timerfd_gettime
+	.long sys_signalfd4
+	.long sys_eventfd2
+	.long sys_epoll_create1
+	.long sys_dup3			/* 330 */
+	.long sys_pipe2
+	.long sys_inotify_init1
+	.long sys_preadv
+	.long sys_pwritev
 
         /*
          * NOTE!! This doesn't have to be exact - we just have

arch/cris/arch-v32/boot/compressed/Makefile

-#
-# arch/cris/arch-v32/boot/compressed/Makefile
-#
-
-asflags-y += -I$(srctree)/include/asm/mach/ -I$(srctree)/include/asm/arch
-ccflags-y += -O2 -I$(srctree)/include/asm/mach/ -I$(srctree)/include/asm/arch
-ldflags-y += -T$(srctree)/$(src)/decompress.lds
-OBJECTS = $(obj)/head.o $(obj)/misc.o
-OBJCOPYFLAGS = -O binary --remove-section=.bss
-
-quiet_cmd_image = BUILD   $@
-cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@
-
-targets := vmlinux piggy.gz decompress.o decompress.bin
-
-$(obj)/decompress.o: $(OBJECTS) FORCE
-	$(call if_changed,ld)
-
-$(obj)/decompress.bin: $(obj)/decompress.o FORCE
-	$(call if_changed,objcopy)
-
-$(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE
-	$(call if_changed,image)
-
-$(obj)/piggy.gz: $(obj)/../Image FORCE
-	$(call if_changed,gzip)

arch/cris/arch-v32/boot/rescue/Makefile

-#
-# Makefile for rescue (bootstrap) code
-#
-
-CC = gcc-cris -mlinux -march=v32 $(LINUXINCLUDE)
-ccflags-y += -O2 -I $(srctree)/include/asm/arch/mach/ \
-		-I $(srctree)/include/asm/arch
-asflags-y += -I $(srctree)/include/asm/arch/mach/ -I $(srctree)/include/asm/arch
-LD = gcc-cris -mlinux -march=v32 -nostdlib
-ldflags-y += -T $(srctree)/$(src)/rescue.lds
-LDPOSTFLAGS = -lgcc
-OBJCOPYFLAGS = -O binary --remove-section=.bss
-obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o
-OBJECT := $(obj)/head.o
-
-targets := rescue.o rescue.bin
-
-quiet_cmd_ldlibgcc = LD      $@
-cmd_ldlibgcc = $(LD) $(LDFLAGS) $(filter-out FORCE,$^) $(LDPOSTFLAGS) -o $@
-
-$(obj)/rescue.o: $(OBJECTS) FORCE
-	$(call if_changed,ldlibgcc)
-
-$(obj)/rescue.bin: $(obj)/rescue.o FORCE
-	$(call if_changed,objcopy)
-	cp -p $(obj)/rescue.bin $(objtree)

arch/cris/arch-v32/drivers/mach-a3/gpio.c

@@ -681,7 +681,7 @@ static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
 		shadow |= ~readl(dir_oe[priv->minor]) |
 			(arg & changeable_bits[priv->minor]);
 		i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
-		spin_lock_irqrestore(&gpio_lock, flags);
+		spin_unlock_irqrestore(&gpio_lock, flags);
 		break;
 	case IO_CLRBITS:
 		spin_lock_irqsave(&gpio_lock, flags);
@@ -690,7 +690,7 @@ static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
 		shadow |= ~readl(dir_oe[priv->minor]) &
 			~(arg & changeable_bits[priv->minor]);
 		i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
-		spin_lock_irqrestore(&gpio_lock, flags);
+		spin_unlock_irqrestore(&gpio_lock, flags);
 		break;
 	case IO_HIGHALARM:
 		/* Set alarm when bits with 1 in arg go high. */

arch/cris/arch-v32/kernel/Makefile

@@ -9,8 +9,6 @@ obj-y   := entry.o traps.o irq.o debugport.o \
 	   process.o ptrace.o setup.o signal.o traps.o time.o \
 	   cache.o cacheflush.o
 
-obj-$(CONFIG_ETRAXFS_SIM) += vcs_hook.o
-
 obj-$(CONFIG_SMP) += smp.o
 obj-$(CONFIG_ETRAX_KGDB) += kgdb.o kgdb_asm.o
 obj-$(CONFIG_ETRAX_FAST_TIMER) += fasttimer.o

arch/cris/arch-v32/kernel/entry.S

@@ -852,6 +852,14 @@ sys_call_table:
 	.long sys_fallocate
 	.long sys_timerfd_settime       /* 325 */
 	.long sys_timerfd_gettime
+	.long sys_signalfd4
+	.long sys_eventfd2
+	.long sys_epoll_create1
+	.long sys_dup3			/* 330 */
+	.long sys_pipe2
+	.long sys_inotify_init1
+	.long sys_preadv
+	.long sys_pwritev
 
         /*
          * NOTE!! This doesn't have to be exact - we just have

arch/cris/arch-v32/boot/Makefile → arch/cris/boot/Makefile

 #
-# arch/cris/arch-v32/boot/Makefile
+# arch/cris/boot/Makefile
 #
 
-OBJCOPYFLAGS = -O binary -R .note -R .comment
+objcopyflags-$(CONFIG_ETRAX_ARCH_V10) += -R .note -R .comment
+objcopyflags-$(CONFIG_ETRAX_ARCH_V32) += --remove-section=.bss
+
+OBJCOPYFLAGS = -O binary $(objcopyflags-y)
+
 
 subdir- := compressed rescue
 targets := Image

arch/cris/arch-v10/boot/compressed/Makefile → arch/cris/boot/compressed/Makefile

 #
-# arch/cris/arch-v10/boot/compressed/Makefile
+# arch/cris/boot/compressed/Makefile
 #
 
 asflags-y += $(LINUXINCLUDE)
 ccflags-y += -O2 $(LINUXINCLUDE)
-ldflags-y += -T $(srctree)/$(src)/decompress.lds
-OBJECTS = $(obj)/head.o $(obj)/misc.o
+
+# asflags-$(CONFIG_ETRAX_ARCH_V32) += -I$(srctree)/include/asm/mach \
+# 				    -I$(srctree)/include/asm/arch
+# ccflags-$(CONFIG_ETRAX_ARCH_V32) += -O2 -I$(srctree)/include/asm/mach
+# 					-I$(srctree)/include/asm/arch
+
+arch-$(CONFIG_ETRAX_ARCH_V10) = v10
+arch-$(CONFIG_ETRAX_ARCH_V32) = v32
+
+ldflags-y += -T $(srctree)/$(src)/decompress_$(arch-y).lds
+
+OBJECTS-$(CONFIG_ETRAX_ARCH_V32) = $(obj)/head_v32.o
+OBJECTS-$(CONFIG_ETRAX_ARCH_V10) = $(obj)/head_v10.o
+OBJECTS= $(OBJECTS-y) $(obj)/misc.o
 OBJCOPYFLAGS = -O binary --remove-section=.bss
 
 quiet_cmd_image = BUILD   $@
@@ -24,4 +36,3 @@ $(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE
 
 $(obj)/piggy.gz: $(obj)/../Image FORCE
 	$(call if_changed,gzip)
-

arch/cris/arch-v10/boot/compressed/head.S → arch/cris/boot/compressed/head_v10.S

@@ -30,7 +30,7 @@
 	beq	dram_init_finished
 	nop
 
-#include "../../lib/dram_init.S"
+#include "../../arch-v10/lib/dram_init.S"
 
 dram_init_finished:
 
@@ -123,4 +123,4 @@ _cmd_line_magic:
 	.dword 0
 _cmd_line_addr:
 	.dword 0
-#include "../../lib/hw_settings.S"
+#include "../../arch-v10/lib/hw_settings.S"

arch/cris/arch-v32/boot/compressed/head.S → arch/cris/boot/compressed/head_v32.S

@@ -17,7 +17,7 @@
 	.globl	input_data
 
 	.text
-_start:
+start:
 	di
 
 	;; Start clocks for used blocks.
@@ -29,9 +29,9 @@ _start:
 	nop
 
 #if defined CONFIG_ETRAXFS
-#include "../../mach-fs/dram_init.S"
+#include "../../arch-v32/mach-fs/dram_init.S"
 #elif defined CONFIG_CRIS_MACH_ARTPEC3
-#include "../../mach-a3/dram_init.S"
+#include "../../arch-v32/mach-a3/dram_init.S"
 #else
 #error Only ETRAXFS and ARTPEC-3 supported!
 #endif
@@ -137,9 +137,9 @@ _boot_source:
 	.dword 0
 
 #if defined CONFIG_ETRAXFS
-#include "../../mach-fs/hw_settings.S"
+#include "../../arch-v32/mach-fs/hw_settings.S"
 #elif defined CONFIG_CRIS_MACH_ARTPEC3
-#include "../../mach-a3/hw_settings.S"
+#include "../../arch-v32/mach-a3/hw_settings.S"
 #else
 #error Only ETRAXFS and ARTPEC-3 supported!
 #endif

arch/cris/arch-v32/boot/compressed/misc.c → arch/cris/boot/compressed/misc.c

@@ -18,8 +18,9 @@
 
 #define KERNEL_LOAD_ADR 0x40004000
 
-
 #include <linux/types.h>
+
+#ifdef CONFIG_ETRAX_ARCH_V32
 #include <hwregs/reg_rdwr.h>
 #include <hwregs/reg_map.h>
 #include <hwregs/ser_defs.h>
@@ -27,6 +28,9 @@
 #ifdef CONFIG_CRIS_MACH_ARTPEC3
 #include <hwregs/clkgen_defs.h>
 #endif
+#else
+#include <arch/svinto.h>
+#endif
 
 /*
  * gzip declarations
@@ -35,12 +39,10 @@
 #define OF(args)  args
 #define STATIC static
 
-void* memset(void* s, int c, size_t n);
-void* memcpy(void* __dest, __const void* __src,
-	     size_t __n);
-
-#define memzero(s, n)     memset ((s), 0, (n))
+void *memset(void *s, int c, size_t n);
+void *memcpy(void *__dest, __const void *__src, size_t __n);
 
+#define memzero(s, n)     memset((s), 0, (n))
 
 typedef unsigned char  uch;
 typedef unsigned short ush;
@@ -68,27 +70,43 @@ static unsigned outcnt = 0;  /* bytes in output buffer */
 #define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */
 #define RESERVED     0xC0 /* bit 6,7:   reserved */
 
-#define get_byte() inbuf[inptr++]
+#define get_byte() (inbuf[inptr++])
 
 /* Diagnostic functions */
 #ifdef DEBUG
-#  define Assert(cond,msg) {if(!(cond)) error(msg);}
+#  define Assert(cond, msg) do { \
+		if (!(cond)) \
+			error(msg); \
+	} while (0)
 #  define Trace(x) fprintf x
-#  define Tracev(x) {if (verbose) fprintf x ;}
-#  define Tracevv(x) {if (verbose>1) fprintf x ;}
-#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
+#  define Tracev(x) do { \
+		if (verbose) \
+			fprintf x; \
+	} while (0)
+#  define Tracevv(x) do { \
+		if (verbose > 1) \
+			fprintf x; \
+	} while (0)
+#  define Tracec(c, x) do { \
+		if (verbose && (c)) \
+			fprintf x; \
+	} while (0)
+#  define Tracecv(c, x) do { \
+		if (verbose > 1 && (c)) \
+			fprintf x; \
+	} while (0)
 #else
-#  define Assert(cond,msg)
+#  define Assert(cond, msg)
 #  define Trace(x)
 #  define Tracev(x)
 #  define Tracevv(x)
-#  define Tracec(c,x)
-#  define Tracecv(c,x)
+#  define Tracec(c, x)
+#  define Tracecv(c, x)
 #endif
 
 static void flush_window(void);
 static void error(char *m);
+static void puts(const char *);
 
 extern char *input_data;  /* lives in head.S */
 
@@ -96,10 +114,6 @@ static long bytes_out;
 static uch *output_data;
 static unsigned long output_ptr;
 
-static void error(char *m);
-
-static void puts(const char *);
-
 /* the "heap" is put directly after the BSS ends, at end */
 
 extern int _end;
@@ -110,8 +124,8 @@ static long free_mem_end_ptr;
 
 /* decompressor info and error messages to serial console */
 
-static inline void
-serout(const char *s, reg_scope_instances regi_ser)
+#ifdef CONFIG_ETRAX_ARCH_V32
+static inline void serout(const char *s, reg_scope_instances regi_ser)
 {
 	reg_ser_rs_stat_din rs;
 	reg_ser_rw_dout dout = {.data = *s};
@@ -123,23 +137,47 @@ serout(const char *s, reg_scope_instances regi_ser)
 
 	REG_WR(ser, regi_ser, rw_dout, dout);
 }
+#endif
 
-static void
-puts(const char *s)
+static void puts(const char *s)
 {
 #ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
 	while (*s) {
 #ifdef CONFIG_ETRAX_DEBUG_PORT0
+#ifdef CONFIG_ETRAX_ARCH_V32
 		serout(s, regi_ser0);
+#else
+		while (!(*R_SERIAL0_STATUS & (1 << 5)))
+			;
+		*R_SERIAL0_TR_DATA = *s++;
+#endif
 #endif
 #ifdef CONFIG_ETRAX_DEBUG_PORT1
+#ifdef CONFIG_ETRAX_ARCH_V32
 		serout(s, regi_ser1);
+#else
+		while (!(*R_SERIAL1_STATUS & (1 << 5)))
+			;
+		*R_SERIAL1_TR_DATA = *s++;
+#endif
 #endif
 #ifdef CONFIG_ETRAX_DEBUG_PORT2
+#ifdef CONFIG_ETRAX_ARCH_V32
 		serout(s, regi_ser2);
+#else
+		while (!(*R_SERIAL2_STATUS & (1 << 5)))
+			;
+		*R_SERIAL2_TR_DATA = *s++;
+#endif
 #endif
 #ifdef CONFIG_ETRAX_DEBUG_PORT3
+#ifdef CONFIG_ETRAX_ARCH_V32
 		serout(s, regi_ser3);
+#else
+		while (!(*R_SERIAL3_STATUS & (1 << 5)))
+			;
+		*R_SERIAL3_TR_DATA = *s++;
+#endif
 #endif
 		*s++;
 	}
@@ -147,8 +185,7 @@ puts(const char *s)
 #endif
 }
 
-void*
-memset(void* s, int c, size_t n)
+void *memset(void *s, int c, size_t n)
 {
 	int i;
 	char *ss = (char*)s;
@@ -158,14 +195,13 @@ memset(void* s, int c, size_t n)
 	return s;
 }
 
-void*
-memcpy(void* __dest, __const void* __src,
-			    size_t __n)
+void *memcpy(void *__dest, __const void *__src, size_t __n)
 {
 	int i;
 	char *d = (char *)__dest, *s = (char *)__src;
 
-	for (i=0;i<__n;i++) d[i] = s[i];
+	for (i = 0; i < __n; i++)
+		d[i] = s[i];
 
 	return __dest;
 }
@@ -175,43 +211,42 @@ memcpy(void* __dest, __const void* __src,
  * (Used for the decompressed data only.)
  */
 
-static void
-flush_window()
+static void flush_window(void)
 {
-    ulg c = crc;         /* temporary variable */
-    unsigned n;
-    uch *in, *out, ch;
-
-    in = window;
-    out = &output_data[output_ptr];
-    for (n = 0; n < outcnt; n++) {
-	    ch = *out++ = *in++;
-	    c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-    }
-    crc = c;
-    bytes_out += (ulg)outcnt;
-    output_ptr += (ulg)outcnt;
-    outcnt = 0;
+	ulg c = crc;         /* temporary variable */
+	unsigned n;
+	uch *in, *out, ch;
+
+	in = window;
+	out = &output_data[output_ptr];
+	for (n = 0; n < outcnt; n++) {
+		ch = *out = *in;
+		out++;
+		in++;
+		c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
+	}
+	crc = c;
+	bytes_out += (ulg)outcnt;
+	output_ptr += (ulg)outcnt;
+	outcnt = 0;
 }
 
-static void
-error(char *x)
+static void error(char *x)
 {
-	puts("\r\n\n");
+	puts("\n\n");
 	puts(x);
-	puts("\r\n\n -- System halted\n");
+	puts("\n\n -- System halted\n");
 
 	while(1);	/* Halt */
 }
 
-void
-setup_normal_output_buffer(void)
+void setup_normal_output_buffer(void)
 {
 	output_data = (char *)KERNEL_LOAD_ADR;
 }
 
-static inline void
-serial_setup(reg_scope_instances regi_ser)
+#ifdef CONFIG_ETRAX_ARCH_V32
+static inline void serial_setup(reg_scope_instances regi_ser)
 {
 	reg_ser_rw_xoff xoff;
 	reg_ser_rw_tr_ctrl tr_ctrl;
@@ -252,12 +287,16 @@ serial_setup(reg_scope_instances regi_ser)
 	REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl);
 	REG_WR(ser, regi_ser, rw_rec_baud_div, rec_baud);
 }
+#endif
 
-void
-decompress_kernel(void)
+void decompress_kernel(void)
 {
 	char revision;
+	char compile_rev;
 
+#ifdef CONFIG_ETRAX_ARCH_V32
+	/* Need at least a CRISv32 to run. */
+	compile_rev = 32;
 #if defined(CONFIG_ETRAX_DEBUG_PORT1) || \
     defined(CONFIG_ETRAX_DEBUG_PORT2) || \
     defined(CONFIG_ETRAX_DEBUG_PORT3)
@@ -277,6 +316,7 @@ decompress_kernel(void)
 	hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot);
 #endif
 
+
 #ifdef CONFIG_ETRAX_DEBUG_PORT0
 	serial_setup(regi_ser0);
 #endif
@@ -300,19 +340,52 @@ decompress_kernel(void)
 
 	/* input_data is set in head.S */
 	inbuf = input_data;
+#else /* CRISv10 */
+	/* Need at least a crisv10 to run. */
+	compile_rev = 10;
+
+	/* input_data is set in head.S */
+	inbuf = input_data;
+
+#ifdef CONFIG_ETRAX_DEBUG_PORT0
+	*R_SERIAL0_XOFF = 0;
+	*R_SERIAL0_BAUD = 0x99;
+	*R_SERIAL0_TR_CTRL = 0x40;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT1
+	*R_SERIAL1_XOFF = 0;
+	*R_SERIAL1_BAUD = 0x99;
+	*R_SERIAL1_TR_CTRL = 0x40;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT2
+	*R_GEN_CONFIG = 0x08;
+	*R_SERIAL2_XOFF = 0;
+	*R_SERIAL2_BAUD = 0x99;
+	*R_SERIAL2_TR_CTRL = 0x40;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT3
+	*R_GEN_CONFIG = 0x100;
+	*R_SERIAL3_XOFF = 0;
+	*R_SERIAL3_BAUD = 0x99;
+	*R_SERIAL3_TR_CTRL = 0x40;
+#endif
+#endif
 
 	setup_normal_output_buffer();
 
 	makecrc();
 
 	__asm__ volatile ("move $vr,%0" : "=rm" (revision));
-	if (revision < 32)
-	{
-		puts("You need an ETRAX FS to run Linux 2.6/crisv32.\r\n");
+	if (revision < compile_rev) {
+#ifdef CONFIG_ETRAX_ARCH_V32
+		puts("You need an ETRAX FS to run Linux 2.6/crisv32\n");
+#else
+		puts("You need an ETRAX 100LX to run linux 2.6\n");
+#endif
 		while(1);
 	}
 
-	puts("Uncompressing Linux...\r\n");
+	puts("Uncompressing Linux...\n");
 	gunzip();
-	puts("Done. Now booting the kernel.\r\n");
+	puts("Done. Now booting the kernel\n");
 }

arch/cris/arch-v10/boot/rescue/Makefile → arch/cris/boot/rescue/Makefile

@@ -2,16 +2,26 @@
 # Makefile for rescue (bootstrap) code
 #
 
-ccflags-y += -O2 $(LINUXINCLUDE)
+# CC = gcc-cris -mlinux -march=v32 $(LINUXINCLUDE)
+# ccflags-$(CONFIG_ETRAX_ARCH_V32) += -I$(srctree)/include/asm/arch/mach/ \
+# 				    -I$(srctree)/include/asm/arch
+# asflags-y += -I $(srctree)/include/asm/arch/mach/ -I $(srctree)/include/asm/arch
+# LD = gcc-cris -mlinux -march=v32 -nostdlib
+
 asflags-y += $(LINUXINCLUDE)
-ldflags-y += -T $(srctree)/$(src)/rescue.lds
+ccflags-y += -O2 $(LINUXINCLUDE)
+arch-$(CONFIG_ETRAX_ARCH_V10) = v10
+arch-$(CONFIG_ETRAX_ARCH_V32) = v32
+
+ldflags-y += -T $(srctree)/$(src)/rescue_$(arch-y).lds
 OBJCOPYFLAGS = -O binary --remove-section=.bss
-obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o
-OBJECT := $(obj)/head.o
+obj-$(CONFIG_ETRAX_ARCH_V32) = $(obj)/head_v32.o
+obj-$(CONFIG_ETRAX_ARCH_V10) = $(obj)/head_v10.o
+OBJECTS := $(obj-y)
 
 targets := rescue.o rescue.bin
 
-$(obj)/rescue.o: $(OBJECT) FORCE
+$(obj)/rescue.o: $(OBJECTS) FORCE
 	$(call if_changed,ld)
 
 $(obj)/rescue.bin: $(obj)/rescue.o FORCE
@@ -26,6 +36,7 @@ $(obj)/testrescue.bin: $(obj)/testrescue.o
 	dd if=testrescue_tmp.bin of=$(obj)/testrescue.bin bs=1 count=784
 	rm tr.bin tmp2423 testrescue_tmp.bin
 
+
 $(obj)/kimagerescue.bin: $(obj)/kimagerescue.o
 	$(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/kimagerescue.o ktr.bin
 # Pad it to 784 bytes, that's what the rescue loader expects
@@ -33,3 +44,4 @@ $(obj)/kimagerescue.bin: $(obj)/kimagerescue.o
 	cat ktr.bin tmp2423 >kimagerescue_tmp.bin
 	dd if=kimagerescue_tmp.bin of=$(obj)/kimagerescue.bin bs=1 count=784
 	rm ktr.bin tmp2423 kimagerescue_tmp.bin
+

arch/cris/arch-v10/boot/rescue/head.S → arch/cris/boot/rescue/head_v10.S

@@ -155,7 +155,7 @@ no_newjump:
 #endif
 
 	;; We need to setup the bus registers before we start using the DRAM
-#include "../../lib/dram_init.S"
+#include "../../../arch-v10/lib/dram_init.S"
 
 	;; we now should go through the checksum-table and check the listed
 	;; partitions for errors.

arch/cris/include/asm/unistd.h

@@ -281,7 +281,7 @@
 #define __NR_mbind		274
 #define __NR_get_mempolicy	275
 #define __NR_set_mempolicy	276
-#define __NR_mq_open 		277
+#define __NR_mq_open		277
 #define __NR_mq_unlink		(__NR_mq_open+1)
 #define __NR_mq_timedsend	(__NR_mq_open+2)
 #define __NR_mq_timedreceive	(__NR_mq_open+3)
@@ -331,10 +331,18 @@
 #define __NR_fallocate		324
 #define __NR_timerfd_settime	325
 #define __NR_timerfd_gettime	326
+#define __NR_signalfd4		327
+#define __NR_eventfd2		328
+#define __NR_epoll_create1	329
+#define __NR_dup3		330
+#define __NR_pipe2		331
+#define __NR_inotify_init1	332
+#define __NR_preadv		333
+#define __NR_pwritev		334
 
 #ifdef __KERNEL__
 
-#define NR_syscalls 327
+#define NR_syscalls 335
 
 #include <arch/unistd.h>
 

arch/microblaze/kernel/cpu/cpuinfo-static.c

@@ -14,8 +14,8 @@
 #include <asm/cpuinfo.h>
 #include <asm/pvr.h>
 
-const static char family_string[] = CONFIG_XILINX_MICROBLAZE0_FAMILY;
-const static char cpu_ver_string[] = CONFIG_XILINX_MICROBLAZE0_HW_VER;
+static const char family_string[] = CONFIG_XILINX_MICROBLAZE0_FAMILY;
+static const char cpu_ver_string[] = CONFIG_XILINX_MICROBLAZE0_HW_VER;
 
 #define err_printk(x) \
 	early_printk("ERROR: Microblaze " x "- different for kernel and DTS\n");

arch/microblaze/kernel/sys_microblaze.c

@@ -131,7 +131,7 @@ sys_ipc(uint call, int first, int second, int third, void *ptr, long fifth)
 		ret = sys_shmctl(first, second, (struct shmid_ds *) ptr);
 		break;
 	}
-	return -EINVAL;
+	return ret;
 }
 
 asmlinkage int sys_vfork(struct pt_regs *regs)

arch/mips/Kconfig

@@ -1411,13 +1411,12 @@ config PAGE_SIZE_4KB
 
 config PAGE_SIZE_8KB
 	bool "8kB"
-	depends on EXPERIMENTAL && CPU_R8000
+	depends on (EXPERIMENTAL && CPU_R8000) || CPU_CAVIUM_OCTEON
 	help
 	  Using 8kB page size will result in higher performance kernel at
 	  the price of higher memory consumption.  This option is available
-	  only on the R8000 processor.  Not that at the time of this writing
-	  this option is still high experimental; there are also issues with
-	  compatibility of user applications.
+	  only on R8000 and cnMIPS processors.  Note that you will need a
+	  suitable Linux distribution to support this.
 
 config PAGE_SIZE_16KB
 	bool "16kB"
@@ -1428,6 +1427,15 @@ config PAGE_SIZE_16KB
 	  all non-R3000 family processors.  Note that you will need a suitable
 	  Linux distribution to support this.
 
+config PAGE_SIZE_32KB
+	bool "32kB"
+	depends on CPU_CAVIUM_OCTEON
+	help
+	  Using 32kB page size will result in higher performance kernel at
+	  the price of higher memory consumption.  This option is available
+	  only on cnMIPS cores.  Note that you will need a suitable Linux
+	  distribution to support this.
+
 config PAGE_SIZE_64KB
 	bool "64kB"
 	depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX
@@ -1958,10 +1966,6 @@ config SECCOMP
 
 endmenu
 
-config RWSEM_GENERIC_SPINLOCK
-	bool
-	default y
-
 config LOCKDEP_SUPPORT
 	bool
 	default y

arch/mips/Makefile

@@ -14,8 +14,6 @@
 
 KBUILD_DEFCONFIG := ip22_defconfig
 
-cflags-y := -ffunction-sections
-
 #
 # Select the object file format to substitute into the linker script.
 #
@@ -50,6 +48,9 @@ ifneq ($(SUBARCH),$(ARCH))
   endif
 endif
 
+cflags-y := -ffunction-sections
+cflags-y += $(call cc-option, -mno-check-zero-division)
+
 ifdef CONFIG_32BIT
 ld-emul			= $(32bit-emul)
 vmlinux-32		= vmlinux

arch/mips/alchemy/common/time.c

@@ -44,7 +44,7 @@
 
 extern int allow_au1k_wait; /* default off for CP0 Counter */
 
-static cycle_t au1x_counter1_read(void)
+static cycle_t au1x_counter1_read(struct clocksource *cs)
 {
 	return au_readl(SYS_RTCREAD);
 }

arch/mips/cavium-octeon/csrc-octeon.c

@@ -38,7 +38,7 @@ void octeon_init_cvmcount(void)
 	local_irq_restore(flags);
 }
 
-static cycle_t octeon_cvmcount_read(void)
+static cycle_t octeon_cvmcount_read(struct clocksource *cs)
 {
 	return read_c0_cvmcount();
 }

arch/mips/include/asm/bitops.h

@@ -567,7 +567,7 @@ static inline unsigned long __fls(unsigned long word)
 	int num;
 
 	if (BITS_PER_LONG == 32 &&
-	    __builtin_constant_p(cpu_has_mips_r) && cpu_has_mips_r) {
+	    __builtin_constant_p(cpu_has_clo_clz) && cpu_has_clo_clz) {
 		__asm__(
 		"	.set	push					\n"
 		"	.set	mips32					\n"
@@ -644,7 +644,7 @@ static inline int fls(int x)
 {
 	int r;
 
-	if (__builtin_constant_p(cpu_has_mips_r) && cpu_has_mips_r) {
+	if (__builtin_constant_p(cpu_has_clo_clz) && cpu_has_clo_clz) {
 		__asm__("clz %0, %1" : "=r" (x) : "r" (x));
 
 		return 32 - x;

arch/mips/include/asm/checksum.h

@@ -40,7 +40,7 @@ static inline
 __wsum csum_partial_copy_from_user(const void __user *src, void *dst, int len,
 				   __wsum sum, int *err_ptr)
 {
-	might_sleep();
+	might_fault();
 	return __csum_partial_copy_user((__force void *)src, dst,
 					len, sum, err_ptr);
 }
@@ -53,7 +53,7 @@ static inline
 __wsum csum_and_copy_to_user(const void *src, void __user *dst, int len,
 			     __wsum sum, int *err_ptr)
 {
-	might_sleep();
+	might_fault();
 	if (access_ok(VERIFY_WRITE, dst, len))
 		return __csum_partial_copy_user(src, (__force void *)dst,
 						len, sum, err_ptr);

arch/mips/include/asm/compat.h

@@ -3,7 +3,6 @@
 /*
  * Architecture specific compatibility types
  */
-#include <linux/seccomp.h>
 #include <linux/thread_info.h>
 #include <linux/types.h>
 #include <asm/page.h>

arch/mips/include/asm/cpu-features.h

@@ -147,6 +147,15 @@
 #define cpu_has_mips_r	(cpu_has_mips32r1 | cpu_has_mips32r2 | \
 			 cpu_has_mips64r1 | cpu_has_mips64r2)
 
+/*
+ * MIPS32, MIPS64, VR5500, IDT32332, IDT32334 and maybe a few other
+ * pre-MIPS32/MIPS53 processors have CLO, CLZ.  For 64-bit kernels
+ * cpu_has_clo_clz also indicates the availability of DCLO and DCLZ.
+ */
+# ifndef cpu_has_clo_clz
+# define cpu_has_clo_clz	cpu_has_mips_r
+# endif
+
 #ifndef cpu_has_dsp
 #define cpu_has_dsp		(cpu_data[0].ases & MIPS_ASE_DSP)
 #endif

arch/mips/include/asm/div64.h

@@ -6,105 +6,63 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
-#ifndef _ASM_DIV64_H
-#define _ASM_DIV64_H
+#ifndef __ASM_DIV64_H
+#define __ASM_DIV64_H
 
-#include <linux/types.h>
+#include <asm-generic/div64.h>
 
-#if (_MIPS_SZLONG == 32)
+#if BITS_PER_LONG == 64
 
-#include <asm/compiler.h>
+#include <linux/types.h>
 
 /*
  * No traps on overflows for any of these...
  */
 
-#define do_div64_32(res, high, low, base) ({ \
-	unsigned long __quot32, __mod32; \
-	unsigned long __cf, __tmp, __tmp2, __i; \
-	\
-	__asm__(".set	push\n\t" \
-		".set	noat\n\t" \
-		".set	noreorder\n\t" \
-		"move	%2, $0\n\t" \
-		"move	%3, $0\n\t" \
-		"b	1f\n\t" \
-		" li	%4, 0x21\n" \
-		"0:\n\t" \
-		"sll	$1, %0, 0x1\n\t" \
-		"srl	%3, %0, 0x1f\n\t" \
-		"or	%0, $1, %5\n\t" \
-		"sll	%1, %1, 0x1\n\t" \
-		"sll	%2, %2, 0x1\n" \
-		"1:\n\t" \
-		"bnez	%3, 2f\n\t" \
-		" sltu	%5, %0, %z6\n\t" \
-		"bnez	%5, 3f\n" \
-		"2:\n\t" \
-		" addiu	%4, %4, -1\n\t" \
-		"subu	%0, %0, %z6\n\t" \
-		"addiu	%2, %2, 1\n" \
-		"3:\n\t" \
-		"bnez	%4, 0b\n\t" \
-		" srl	%5, %1, 0x1f\n\t" \
-		".set	pop" \
-		: "=&r" (__mod32), "=&r" (__tmp), \
-		  "=&r" (__quot32), "=&r" (__cf), \
-		  "=&r" (__i), "=&r" (__tmp2) \
-		: "Jr" (base), "0" (high), "1" (low)); \
-	\
-	(res) = __quot32; \
-	__mod32; })
-
-#define do_div(n, base) ({ \
-	unsigned long long __quot; \
-	unsigned long __mod; \
-	unsigned long long __div; \
-	unsigned long __upper, __low, __high, __base; \
-	\
-	__div = (n); \
-	__base = (base); \
-	\
-	__high = __div >> 32; \
-	__low = __div; \
-	__upper = __high; \
-	\
-	if (__high) \
-		__asm__("divu	$0, %z2, %z3" \
-			: "=h" (__upper), "=l" (__high) \
-			: "Jr" (__high), "Jr" (__base) \
-			: GCC_REG_ACCUM); \
-	\
-	__mod = do_div64_32(__low, __upper, __low, __base); \
-	\
-	__quot = __high; \
-	__quot = __quot << 32 | __low; \
-	(n) = __quot; \
-	__mod; })
-
-#endif /* (_MIPS_SZLONG == 32) */
-
-#if (_MIPS_SZLONG == 64)
-
-/*
- * Hey, we're already 64-bit, no
- * need to play games..
- */
-#define do_div(n, base) ({ \
-	unsigned long __quot; \
-	unsigned int __mod; \
-	unsigned long __div; \
-	unsigned int __base; \
-	\
-	__div = (n); \
-	__base = (base); \
-	\
-	__mod = __div % __base; \
-	__quot = __div / __base; \
-	\
-	(n) = __quot; \
-	__mod; })
+#define __div64_32(n, base)						\
+({									\
+	unsigned long __cf, __tmp, __tmp2, __i;				\
+	unsigned long __quot32, __mod32;				\
+	unsigned long __high, __low;					\
+	unsigned long long __n;						\
+									\
+	__high = *__n >> 32;						\
+	__low = __n;							\
+	__asm__(							\
+	"	.set	push					\n"	\
+	"	.set	noat					\n"	\
+	"	.set	noreorder				\n"	\
+	"	move	%2, $0					\n"	\
+	"	move	%3, $0					\n"	\
+	"	b	1f					\n"	\
+	"	 li	%4, 0x21				\n"	\
+	"0:							\n"	\
+	"	sll	$1, %0, 0x1				\n"	\
+	"	srl	%3, %0, 0x1f				\n"	\
+	"	or	%0, $1, %5				\n"	\
+	"	sll	%1, %1, 0x1				\n"	\
+	"	sll	%2, %2, 0x1				\n"	\
+	"1:							\n"	\
+	"	bnez	%3, 2f					\n"	\
+	"	 sltu	%5, %0, %z6				\n"	\
+	"	bnez	%5, 3f					\n"	\
+	"2:							\n"	\
+	"	 addiu	%4, %4, -1				\n"	\
+	"	subu	%0, %0, %z6				\n"	\
+	"	addiu	%2, %2, 1				\n"	\
+	"3:							\n"	\
+	"	bnez	%4, 0b\n\t"					\
+	"	 srl	%5, %1, 0x1f\n\t"				\
+	"	.set	pop"						\
+	: "=&r" (__mod32), "=&r" (__tmp),				\
+	  "=&r" (__quot32), "=&r" (__cf),				\
+	  "=&r" (__i), "=&r" (__tmp2)					\
+	: "Jr" (base), "0" (__high), "1" (__low));			\
+									\
+	(__n) = __quot32;						\
+	__mod32;							\
+})
 
-#endif /* (_MIPS_SZLONG == 64) */
+#endif /* BITS_PER_LONG == 64 */
 
-#endif /* _ASM_DIV64_H */
+#endif /* __ASM_DIV64_H */

arch/mips/include/asm/dma-mapping.h

@@ -24,8 +24,13 @@ extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 	enum dma_data_direction direction);
 extern dma_addr_t dma_map_page(struct device *dev, struct page *page,
 	unsigned long offset, size_t size, enum dma_data_direction direction);
-extern void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
-	size_t size, enum dma_data_direction direction);
+
+static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+	size_t size, enum dma_data_direction direction)
+{
+	dma_unmap_single(dev, dma_address, size, direction);
+}
+
 extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
 	int nhwentries, enum dma_data_direction direction);
 extern void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,

arch/mips/include/asm/fixmap.h

@@ -108,6 +108,9 @@ static inline unsigned long virt_to_fix(const unsigned long vaddr)
 	return __virt_to_fix(vaddr);
 }
 
+#define kmap_get_fixmap_pte(vaddr)					\
+	pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr))
+
 /*
  * Called from pgtable_init()
  */

arch/mips/include/asm/hazards.h

@@ -138,8 +138,9 @@ do {									\
 		__instruction_hazard();					\
 } while (0)
 
-#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \
-      defined(CONFIG_CPU_R5500) || defined(CONFIG_MACH_ALCHEMY)
+#elif defined(CONFIG_MACH_ALCHEMY) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \
+      defined(CONFIG_CPU_LOONGSON2) || defined(CONFIG_CPU_R10000) || \
+      defined(CONFIG_CPU_R5500)
 
 /*
  * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.

arch/mips/include/asm/highmem.h

@@ -30,8 +30,6 @@
 /* declarations for highmem.c */
 extern unsigned long highstart_pfn, highend_pfn;
 
-extern pte_t *kmap_pte;
-extern pgprot_t kmap_prot;
 extern pte_t *pkmap_page_table;
 
 /*
@@ -62,6 +60,10 @@ extern struct page *__kmap_atomic_to_page(void *ptr);
 
 #define flush_cache_kmaps()	flush_cache_all()
 
+extern void kmap_init(void);
+
+#define kmap_prot PAGE_KERNEL
+
 #endif /* __KERNEL__ */
 
 #endif /* _ASM_HIGHMEM_H */

arch/mips/include/asm/mach-au1x00/au1000.h

@@ -715,7 +715,7 @@ enum soc_au1500_ints {
 #ifdef CONFIG_SOC_AU1100
 enum soc_au1100_ints {
 	AU1100_FIRST_INT	= MIPS_CPU_IRQ_BASE + 8,
-	AU1100_UART0_INT,
+	AU1100_UART0_INT	= AU1100_FIRST_INT,
 	AU1100_UART1_INT,
 	AU1100_SD_INT,
 	AU1100_UART3_INT,
@@ -902,8 +902,8 @@ enum soc_au1200_ints {
 	AU1000_RTC_MATCH0_INT,
 	AU1000_RTC_MATCH1_INT,
 	AU1000_RTC_MATCH2_INT,
-
-	AU1200_NAND_INT		= AU1200_FIRST_INT + 23,
+	AU1200_GPIO_203,
+	AU1200_NAND_INT,
 	AU1200_GPIO_204,
 	AU1200_GPIO_205,
 	AU1200_GPIO_206,

arch/mips/include/asm/mach-au1x00/au1xxx_ide.h

@@ -46,20 +46,6 @@
 #define CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON	0
 #endif
 
-#ifdef CONFIG_PM
-/*
- * This will enable the device to be powered up when write() or read()
- * is called. If this is not defined, the driver will return -EBUSY.
- */
-#define WAKE_ON_ACCESS 1
-
-typedef struct {
-	spinlock_t		lock;	/* Used to block on state transitions */
-	au1xxx_power_dev_t	*dev;	/* Power Managers device structure */
-	unsigned		stopped; /* Used to signal device is stopped */
-} pm_state;
-#endif
-
 typedef struct {
 	u32			tx_dev_id, rx_dev_id, target_dev_id;
 	u32			tx_chan, rx_chan;
@@ -72,9 +58,6 @@ typedef struct {
 #endif
 	int			irq;
 	u32			regbase;
-#ifdef CONFIG_PM
-	pm_state		pm;
-#endif
 } _auide_hwif;
 
 /******************************************************************************/

arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h

+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009 Wu Zhangjin <wuzj@lemote.com>
+ * Copyright (C) 2009 Philippe Vachon <philippe@cowpig.ca>
+ * Copyright (C) 2009 Zhang Le <r0bertz@gentoo.org>
+ *
+ * reference: /proc/cpuinfo,
+ * 	arch/mips/kernel/cpu-probe.c(cpu_probe_legacy),
+ * 	arch/mips/kernel/proc.c(show_cpuinfo),
+ *      loongson2f user manual.
+ */
+
+#ifndef __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_dcache_line_size()	32
+#define cpu_icache_line_size()	32
+#define cpu_scache_line_size()	32
+
+
+#define cpu_has_32fpr		1
+#define cpu_has_3k_cache	0
+#define cpu_has_4k_cache	1
+#define cpu_has_4kex		1
+#define cpu_has_64bits		1
+#define cpu_has_cache_cdex_p	0
+#define cpu_has_cache_cdex_s	0
+#define cpu_has_counter		1
+#define cpu_has_dc_aliases	1
+#define cpu_has_divec		0
+#define cpu_has_dsp		0
+#define cpu_has_ejtag		0
+#define cpu_has_fpu		1
+#define cpu_has_ic_fills_f_dc	0
+#define cpu_has_inclusive_pcaches	1
+#define cpu_has_llsc 		1
+#define cpu_has_mcheck		0
+#define cpu_has_mdmx		0
+#define cpu_has_mips16		0
+#define cpu_has_mips32r1	0
+#define cpu_has_mips32r2	0
+#define cpu_has_mips3d		0
+#define cpu_has_mips64r1	0
+#define cpu_has_mips64r2	0
+#define cpu_has_mipsmt		0
+#define cpu_has_prefetch	0
+#define cpu_has_smartmips	0
+#define cpu_has_tlb		1
+#define cpu_has_tx39_cache	0
+#define cpu_has_userlocal	0
+#define cpu_has_vce		0
+#define cpu_has_vtag_icache	0
+#define cpu_has_watch		1
+#define cpu_icache_snoops_remote_store	1
+
+#endif /* __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H */

arch/mips/include/asm/page.h

@@ -23,6 +23,9 @@
 #ifdef CONFIG_PAGE_SIZE_16KB
 #define PAGE_SHIFT	14
 #endif
+#ifdef CONFIG_PAGE_SIZE_32KB
+#define PAGE_SHIFT	15
+#endif
 #ifdef CONFIG_PAGE_SIZE_64KB
 #define PAGE_SHIFT	16
 #endif

arch/mips/include/asm/pgtable-64.h

@@ -83,6 +83,12 @@
 #define PMD_ORDER		0
 #define PTE_ORDER		0
 #endif
+#ifdef CONFIG_PAGE_SIZE_32KB
+#define PGD_ORDER		0
+#define PUD_ORDER		aieeee_attempt_to_allocate_pud
+#define PMD_ORDER		0
+#define PTE_ORDER		0
+#endif
 #ifdef CONFIG_PAGE_SIZE_64KB
 #define PGD_ORDER		0
 #define PUD_ORDER		aieeee_attempt_to_allocate_pud

arch/mips/include/asm/sn/addrs.h

@@ -359,11 +359,11 @@
 	TO_NODE_UNCAC((nasid), LAUNCH_OFFSET(nasid, slice))
 #define LAUNCH_SIZE(nasid)	KLD_LAUNCH(nasid)->size
 
-#define NMI_OFFSET(nasid, slice)					\
+#define SN_NMI_OFFSET(nasid, slice)					\
 	(KLD_NMI(nasid)->offset +					\
 	 KLD_NMI(nasid)->stride * (slice))
 #define NMI_ADDR(nasid, slice)						\
-	TO_NODE_UNCAC((nasid), NMI_OFFSET(nasid, slice))
+	TO_NODE_UNCAC((nasid), SN_NMI_OFFSET(nasid, slice))
 #define NMI_SIZE(nasid)	KLD_NMI(nasid)->size
 
 #define KLCONFIG_OFFSET(nasid)	KLD_KLCONFIG(nasid)->offset

arch/mips/include/asm/sn/nmi.h

@@ -3,13 +3,13 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
+ * Derived from IRIX <sys/SN/nmi.h>, Revision 1.5.
+ *
  * Copyright (C) 1992 - 1997 Silicon Graphics, Inc.
  */
 #ifndef __ASM_SN_NMI_H
 #define __ASM_SN_NMI_H
 
-#ident "$Revision: 1.5 $"
-
 #include <asm/sn/addrs.h>
 
 /*

arch/mips/include/asm/thread_info.h

@@ -75,6 +75,9 @@ register struct thread_info *__current_thread_info __asm__("$28");
 #ifdef CONFIG_PAGE_SIZE_16KB
 #define THREAD_SIZE_ORDER (0)
 #endif
+#ifdef CONFIG_PAGE_SIZE_32KB
+#define THREAD_SIZE_ORDER (0)
+#endif
 #ifdef CONFIG_PAGE_SIZE_64KB
 #define THREAD_SIZE_ORDER (0)
 #endif

arch/mips/kernel/cevt-smtc.c

@@ -245,7 +245,7 @@ irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
 }
 
 
-int __cpuinit mips_clockevent_init(void)
+int __cpuinit smtc_clockevent_init(void)
 {
 	uint64_t mips_freq = mips_hpt_frequency;
 	unsigned int cpu = smp_processor_id();