Commit 111b0cdb authored by Takashi Iwai's avatar Takashi Iwai

ALSA: seq: Allow the modular sequencer registration

Many drivers bind the sequencer stuff in off-load by another driver
module, so that it's loaded only on demand.  In the current code, this
mechanism doesn't work when the driver is built-in while the sequencer
is module.  We check with IS_REACHABLE() and enable only when the
sequencer is in the same level of build.

However, this is basically a overshoot.  The binder code
(snd-seq-device) is an individual module from the sequencer core
(snd-seq), and we just have to make the former a built-in while
keeping the latter a module for allowing the scenario like the above.

This patch achieves that by rewriting Kconfig slightly.  Now, a driver
that provides the manual sequencer device binding should select
CONFIG_SND_SEQ_DEVICE in a way as
	select SND_SEQ_DEVICE if SND_SEQUENCER != n

Note that the "!=n" is needed here to avoid the influence of the
sequencer core is module while the driver is built-in.

Also, since rawmidi.o may be linked with snd_seq_device.o when
built-in, we have to shuffle the code to make the linker happy.
(the kernel linker isn't smart enough yet to handle such a case.)
That is, snd_seq_device.c is moved to sound/core from sound/core/seq,
as well as Makefile.

Last but not least, the patch replaces the code using IS_REACHABLE()
with IS_ENABLED(), since now the condition meets always when enabled.
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent 82721155
......@@ -18,8 +18,12 @@ config SND_DMAENGINE_PCM
config SND_HWDEP
tristate
config SND_SEQ_DEVICE
tristate
config SND_RAWMIDI
tristate
select SND_SEQ_DEVICE if SND_SEQUENCER != n
config SND_COMPRESS_OFFLOAD
tristate
......
......@@ -31,6 +31,7 @@ snd-timer-objs := timer.o
snd-hrtimer-objs := hrtimer.o
snd-rtctimer-objs := rtctimer.o
snd-hwdep-objs := hwdep.o
snd-seq-device-objs := seq_device.o
snd-compress-objs := compress_offload.o
......@@ -40,6 +41,7 @@ obj-$(CONFIG_SND_TIMER) += snd-timer.o
obj-$(CONFIG_SND_HRTIMER) += snd-hrtimer.o
obj-$(CONFIG_SND_PCM) += snd-pcm.o
obj-$(CONFIG_SND_DMAENGINE_PCM) += snd-pcm-dmaengine.o
obj-$(CONFIG_SND_SEQ_DEVICE) += snd-seq-device.o
obj-$(CONFIG_SND_RAWMIDI) += snd-rawmidi.o
obj-$(CONFIG_SND_OSSEMUL) += oss/
......
......@@ -1610,7 +1610,7 @@ static int snd_rawmidi_dev_free(struct snd_device *device)
return snd_rawmidi_free(rmidi);
}
#if IS_REACHABLE(CONFIG_SND_SEQUENCER)
#if IS_ENABLED(CONFIG_SND_SEQUENCER)
static void snd_rawmidi_dev_seq_free(struct snd_seq_device *device)
{
struct snd_rawmidi *rmidi = device->private_data;
......@@ -1691,7 +1691,7 @@ static int snd_rawmidi_dev_register(struct snd_device *device)
}
}
rmidi->proc_entry = entry;
#if IS_REACHABLE(CONFIG_SND_SEQUENCER)
#if IS_ENABLED(CONFIG_SND_SEQUENCER)
if (!rmidi->ops || !rmidi->ops->dev_register) { /* own registration mechanism */
if (snd_seq_device_new(rmidi->card, rmidi->device, SNDRV_SEQ_DEV_ID_MIDISYNTH, 0, &rmidi->seq_dev) >= 0) {
rmidi->seq_dev->private_data = rmidi;
......
config SND_SEQUENCER
tristate "Sequencer support"
select SND_TIMER
select SND_SEQ_DEVICE
help
Say Y or M to enable MIDI sequencer and router support. This
feature allows routing and enqueueing of MIDI events. Events
......@@ -59,4 +60,3 @@ config SND_SEQ_VIRMIDI
tristate
endif # SND_SEQUENCER
......@@ -3,7 +3,6 @@
# Copyright (c) 1999 by Jaroslav Kysela <perex@perex.cz>
#
snd-seq-device-objs := seq_device.o
snd-seq-objs := seq.o seq_lock.o seq_clientmgr.o seq_memory.o seq_queue.o \
seq_fifo.o seq_prioq.o seq_timer.o \
seq_system.o seq_ports.o
......@@ -14,7 +13,7 @@ snd-seq-midi-event-objs := seq_midi_event.o
snd-seq-dummy-objs := seq_dummy.o
snd-seq-virmidi-objs := seq_virmidi.o
obj-$(CONFIG_SND_SEQUENCER) += snd-seq.o snd-seq-device.o
obj-$(CONFIG_SND_SEQUENCER) += snd-seq.o
obj-$(CONFIG_SND_SEQUENCER_OSS) += oss/
obj-$(CONFIG_SND_SEQ_DUMMY) += snd-seq-dummy.o
......
......@@ -6,11 +6,13 @@ config SND_OPL3_LIB
tristate
select SND_TIMER
select SND_HWDEP
select SND_SEQ_DEVICE if SND_SEQUENCER != n
config SND_OPL4_LIB
tristate
select SND_TIMER
select SND_HWDEP
select SND_SEQ_DEVICE if SND_SEQUENCER != n
# select SEQ stuff to min(SND_SEQUENCER,SND_XXX)
config SND_OPL3_LIB_SEQ
......
......@@ -528,7 +528,7 @@ int snd_opl3_hwdep_new(struct snd_opl3 * opl3,
opl3->hwdep = hw;
opl3->seq_dev_num = seq_device;
#if IS_REACHABLE(CONFIG_SND_SEQUENCER)
#if IS_ENABLED(CONFIG_SND_SEQUENCER)
if (snd_seq_device_new(card, seq_device, SNDRV_SEQ_DEV_ID_OPL3,
sizeof(struct snd_opl3 *), &opl3->seq_dev) >= 0) {
strcpy(opl3->seq_dev->name, hw->name);
......
......@@ -153,7 +153,7 @@ static int snd_opl4_detect(struct snd_opl4 *opl4)
return 0;
}
#if IS_REACHABLE(CONFIG_SND_SEQUENCER)
#if IS_ENABLED(CONFIG_SND_SEQUENCER)
static void snd_opl4_seq_dev_free(struct snd_seq_device *seq_dev)
{
struct snd_opl4 *opl4 = seq_dev->private_data;
......@@ -249,7 +249,7 @@ int snd_opl4_create(struct snd_card *card,
snd_opl4_create_mixer(opl4);
snd_opl4_create_proc(opl4);
#if IS_REACHABLE(CONFIG_SND_SEQUENCER)
#if IS_ENABLED(CONFIG_SND_SEQUENCER)
opl4->seq_client = -1;
if (opl4->hardware < OPL3_HW_OPL4_ML)
snd_opl4_create_seq_dev(opl4, seq_device);
......
......@@ -184,7 +184,7 @@ struct snd_opl4 {
#endif
struct mutex access_mutex;
#if IS_REACHABLE(CONFIG_SND_SEQUENCER)
#if IS_ENABLED(CONFIG_SND_SEQUENCER)
int used;
int seq_dev_num;
......
......@@ -377,6 +377,7 @@ config SND_SBAWE
select SND_OPL3_LIB
select SND_MPU401_UART
select SND_SB16_DSP
select SND_SEQ_DEVICE if SND_SEQUENCER != n
help
Say Y here to include support for Sound Blaster AWE soundcards
(including the Plug and Play version).
......
......@@ -1138,7 +1138,7 @@ snd_emu8000_new(struct snd_card *card, int index, long port, int seq_ports,
snd_emu8000_free(hw);
return err;
}
#if IS_REACHABLE(CONFIG_SND_SEQUENCER)
#if IS_ENABLED(CONFIG_SND_SEQUENCER)
if (snd_seq_device_new(card, index, SNDRV_SEQ_DEV_ID_EMU8000,
sizeof(struct snd_emu8000*), &awe) >= 0) {
strcpy(awe->name, "EMU-8000");
......
......@@ -62,7 +62,7 @@ MODULE_SUPPORTED_DEVICE("{{Creative Labs,SB AWE 32},"
#define SNDRV_DEBUG_IRQ
#endif
#if defined(SNDRV_SBAWE) && IS_REACHABLE(CONFIG_SND_SEQUENCER)
#if defined(SNDRV_SBAWE) && IS_ENABLED(CONFIG_SND_SEQUENCER)
#define SNDRV_SBAWE_EMU8000
#endif
......
......@@ -465,6 +465,7 @@ config SND_EMU10K1
select SND_RAWMIDI
select SND_AC97_CODEC
select SND_TIMER
select SND_SEQ_DEVICE if SND_SEQUENCER != n
depends on ZONE_DMA
help
Say Y to include support for Sound Blaster PCI 512, Live!,
......
......@@ -37,7 +37,7 @@ MODULE_LICENSE("GPL");
MODULE_SUPPORTED_DEVICE("{{Creative Labs,SB Live!/PCI512/E-mu APS},"
"{Creative Labs,SB Audigy}}");
#if IS_REACHABLE(CONFIG_SND_SEQUENCER)
#if IS_ENABLED(CONFIG_SND_SEQUENCER)
#define ENABLE_SYNTH
#include <sound/emu10k1_synth.h>
#endif
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment