Input: add support for Nomadik SKE keypad controller

Add support for the keypad controller in the Scroll Key Encoder (SKE)
module on the Nomadik family and the DB8500 SoC.
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

arch/arm/plat-nomadik/include/plat/ske.h

+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com>
+ *
+ * ux500 Scroll key and Keypad Encoder (SKE) header
+ */
+
+#ifndef __SKE_H
+#define __SKE_H
+
+#include <linux/input/matrix_keypad.h>
+
+/* register definitions for SKE peripheral */
+#define SKE_CR		0x00
+#define SKE_VAL0	0x04
+#define SKE_VAL1	0x08
+#define SKE_DBCR	0x0C
+#define SKE_IMSC	0x10
+#define SKE_RIS		0x14
+#define SKE_MIS		0x18
+#define SKE_ICR		0x1C
+
+/*
+ * Keypad module
+ */
+
+/**
+ * struct keypad_platform_data - structure for platform specific data
+ * @init:	pointer to keypad init function
+ * @exit:	pointer to keypad deinitialisation function
+ * @keymap_data: matrix scan code table for keycodes
+ * @krow:	maximum number of rows
+ * @kcol:	maximum number of columns
+ * @debounce_ms: platform specific debounce time
+ * @no_autorepeat: flag for auto repetition
+ * @wakeup_enable: allow waking up the system
+ */
+struct ske_keypad_platform_data {
+	int (*init)(void);
+	int (*exit)(void);
+	const struct matrix_keymap_data *keymap_data;
+	u8 krow;
+	u8 kcol;
+	u8 debounce_ms;
+	bool no_autorepeat;
+	bool wakeup_enable;
+};
+#endif	/*__SKE_KPD_H*/

drivers/input/keyboard/Kconfig

@@ -327,6 +327,16 @@ config KEYBOARD_NEWTON
 	  To compile this driver as a module, choose M here: the
 	  module will be called newtonkbd.
 
+config KEYBOARD_NOMADIK
+	tristate "ST-Ericsson Nomadik SKE keyboard"
+	depends on PLAT_NOMADIK
+	help
+	  Say Y here if you want to use a keypad provided on the SKE controller
+	  used on the Ux500 and Nomadik platforms
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called nmk-ske-keypad.
+
 config KEYBOARD_OPENCORES
 	tristate "OpenCores Keyboard Controller"
 	help

drivers/input/keyboard/Makefile

@@ -28,6 +28,7 @@ obj-$(CONFIG_KEYBOARD_MATRIX)		+= matrix_keypad.o
 obj-$(CONFIG_KEYBOARD_MAX7359)		+= max7359_keypad.o
 obj-$(CONFIG_KEYBOARD_MCS)		+= mcs_touchkey.o
 obj-$(CONFIG_KEYBOARD_NEWTON)		+= newtonkbd.o
+obj-$(CONFIG_KEYBOARD_NOMADIK)		+= nomadik-ske-keypad.o
 obj-$(CONFIG_KEYBOARD_OMAP)		+= omap-keypad.o
 obj-$(CONFIG_KEYBOARD_OMAP4)		+= omap4-keypad.o
 obj-$(CONFIG_KEYBOARD_OPENCORES)	+= opencores-kbd.o