Commit 1194d7b8 authored by Jon Hunter's avatar Jon Hunter Committed by Paul Walmsley

ARM: OMAP3+: Update DPLL Fint range for OMAP36xx and OMAP4xxx devices

The OMAP36xx and OMAP4xxx DPLLs have a different internal reference
clock frequency (fint) operating range than OMAP3430. Update the
dpll_test_fint() function to check for the correct frequency ranges
for OMAP36xx and OMAP4xxx.

For OMAP36xx and OMAP4xxx devices, DPLLs fint range is 0.5MHz to
2.5MHz for j-type DPLLs and otherwise it is 32KHz to 52MHz for all
other DPLLs.
Signed-off-by: default avatarJon Hunter <jon-hunter@ti.com>
Signed-off-by: default avatarPaul Walmsley <paul@pwsan.com>
parent cf2a82d7
......@@ -46,10 +46,19 @@
(DPLL_SCALE_FACTOR / DPLL_SCALE_BASE))
/* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */
#define DPLL_FINT_BAND1_MIN 750000
#define DPLL_FINT_BAND1_MAX 2100000
#define DPLL_FINT_BAND2_MIN 7500000
#define DPLL_FINT_BAND2_MAX 21000000
#define OMAP3430_DPLL_FINT_BAND1_MIN 750000
#define OMAP3430_DPLL_FINT_BAND1_MAX 2100000
#define OMAP3430_DPLL_FINT_BAND2_MIN 7500000
#define OMAP3430_DPLL_FINT_BAND2_MAX 21000000
/*
* DPLL valid Fint frequency range for OMAP36xx and OMAP4xxx.
* From device data manual section 4.3 "DPLL and DLL Specifications".
*/
#define OMAP3PLUS_DPLL_FINT_JTYPE_MIN 500000
#define OMAP3PLUS_DPLL_FINT_JTYPE_MAX 2500000
#define OMAP3PLUS_DPLL_FINT_MIN 32000
#define OMAP3PLUS_DPLL_FINT_MAX 52000000
/* _dpll_test_fint() return codes */
#define DPLL_FINT_UNDERFLOW -1
......@@ -71,33 +80,43 @@
static int _dpll_test_fint(struct clk *clk, u8 n)
{
struct dpll_data *dd;
long fint;
long fint, fint_min, fint_max;
int ret = 0;
dd = clk->dpll_data;
/* DPLL divider must result in a valid jitter correction val */
fint = clk->parent->rate / n;
if (fint < DPLL_FINT_BAND1_MIN) {
if (cpu_is_omap24xx()) {
/* Should not be called for OMAP2, so warn if it is called */
WARN(1, "No fint limits available for OMAP2!\n");
return DPLL_FINT_INVALID;
} else if (cpu_is_omap3430()) {
fint_min = OMAP3430_DPLL_FINT_BAND1_MIN;
fint_max = OMAP3430_DPLL_FINT_BAND2_MAX;
} else if (dd->flags & DPLL_J_TYPE) {
fint_min = OMAP3PLUS_DPLL_FINT_JTYPE_MIN;
fint_max = OMAP3PLUS_DPLL_FINT_JTYPE_MAX;
} else {
fint_min = OMAP3PLUS_DPLL_FINT_MIN;
fint_max = OMAP3PLUS_DPLL_FINT_MAX;
}
if (fint < fint_min) {
pr_debug("rejecting n=%d due to Fint failure, "
"lowering max_divider\n", n);
dd->max_divider = n;
ret = DPLL_FINT_UNDERFLOW;
} else if (fint > DPLL_FINT_BAND1_MAX &&
fint < DPLL_FINT_BAND2_MIN) {
pr_debug("rejecting n=%d due to Fint failure\n", n);
ret = DPLL_FINT_INVALID;
} else if (fint > DPLL_FINT_BAND2_MAX) {
} else if (fint > fint_max) {
pr_debug("rejecting n=%d due to Fint failure, "
"boosting min_divider\n", n);
dd->min_divider = n;
ret = DPLL_FINT_INVALID;
} else if (cpu_is_omap3430() && fint > OMAP3430_DPLL_FINT_BAND1_MAX &&
fint < OMAP3430_DPLL_FINT_BAND2_MIN) {
pr_debug("rejecting n=%d due to Fint failure\n", n);
ret = DPLL_FINT_INVALID;
}
return ret;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment