Skip to content

L
linux
Commit 11c70529 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc 

Pull ARM SoC driver updates from Arnd Bergmann:
 "As usual, there are lots of minor driver changes across SoC platforms
  from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
  These usually add support for additional chip variations in existing
  drivers, but also add features or bugfixes.

  The SCMI firmware subsystem gains a unified raw userspace interface
  through debugfs, which can be used for validation purposes.

  Newly added drivers include:

   - New power management drivers for StarFive JH7110, Allwinner D1 and
     Renesas RZ/V2M

   - A driver for Qualcomm battery and power supply status

   - A SoC device driver for identifying Nuvoton WPCM450 chips

   - A regulator coupler driver for Mediatek MT81xxv"

* tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
  power: supply: Introduce Qualcomm PMIC GLINK power supply
  soc: apple: rtkit: Do not copy the reg state structure to the stack
  soc: sunxi: SUN20I_PPU should depend on PM
  memory: renesas-rpc-if: Remove redundant division of dummy
  soc: qcom: socinfo: Add IDs for IPQ5332 and its variant
  dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant
  dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
  firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/
  MAINTAINERS: Update qcom CPR maintainer entry
  dt-bindings: firmware: document Qualcomm SM8550 SCM
  dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
  soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
  dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
  soc: qcom: socinfo: Add support for new field in revision 17
  soc: qcom: smd-rpm: Add IPQ9574 compatible
  soc: qcom: pmic_glink: remove redundant calculation of svid
  soc: qcom: stats: Populate all subsystem debugfs files
  dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
  soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies
  soc: qcom: pmic_glink: Introduce altmode support
  ...
parents d40b2f4c 524af30c
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 10055 additions and 1337 deletions
Documentation/ABI/testing/debugfs-driver-dcc 0 → 100644
View file @ 11c70529
What: /sys/kernel/debug/dcc/.../ready
Date: December 2022
Contact: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Description:
This file is used to check the status of the dcc
hardware if it's ready to receive user configurations.
A 'Y' here indicates dcc is ready.
What: /sys/kernel/debug/dcc/.../trigger
Date: December 2022
Contact: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Description:
This is the debugfs interface for manual software
triggers. The trigger can be invoked by writing '1'
to the file.
What: /sys/kernel/debug/dcc/.../config_reset
Date: December 2022
Contact: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Description:
This file is used to reset the configuration of
a dcc driver to the default configuration. When '1'
is written to the file, all the previous addresses
stored in the driver gets removed and users need to
reconfigure addresses again.
What: /sys/kernel/debug/dcc/.../[list-number]/config
Date: December 2022
Contact: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Description:
This stores the addresses of the registers which
can be read in case of a hardware crash or manual
software triggers. The input addresses type
can be one of following dcc instructions: read,
write, read-write, and loop type. The lists need to
be configured sequentially and not in a overlapping
manner; e.g. users can jump to list x only after
list y is configured and enabled. The input format for
each type is as follows:
i) Read instruction
::
echo R <addr> <n> <bus> >/sys/kernel/debug/dcc/../[list-number]/config
where:
<addr>
The address to be read.
<n>
The addresses word count, starting from address <1>.
Each word is 32 bits (4 bytes). If omitted, defaulted
to 1.
<bus type>
The bus type, which can be either 'apb' or 'ahb'.
The default is 'ahb' if leaved out.
ii) Write instruction
::
echo W <addr> <n> <bus type> > /sys/kernel/debug/dcc/../[list-number]/config
where:
<addr>
The address to be written.
<n>
The value to be written at <addr>.
<bus type>
The bus type, which can be either 'apb' or 'ahb'.
iii) Read-write instruction
::
echo RW <addr> <n> <mask> > /sys/kernel/debug/dcc/../[list-number]/config
where:
<addr>
The address to be read and written.
<n>
The value to be written at <addr>.
<mask>
The value mask.
iv) Loop instruction
::
echo L <loop count> <address count> <address>... > /sys/kernel/debug/dcc/../[list-number]/config
where:
<loop count>
Number of iterations
<address count>
total number of addresses to be written
<address>
Space-separated list of addresses.
What: /sys/kernel/debug/dcc/.../[list-number]/enable
Date: December 2022
Contact: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Description:
This debugfs interface is used for enabling the
the dcc hardware. A file named "enable" is in the
directory list number where users can enable/disable
the specific list by writing boolean (1 or 0) to the
file.
On enabling the dcc, all the addresses specified
by the user for the corresponding list is written
into dcc sram which is read by the dcc hardware
on manual or crash induced triggers. Lists must
be configured and enabled sequentially, e.g. list
2 can only be enabled when list 1 have so.
Documentation/ABI/testing/debugfs-scmi 0 → 100644
View file @ 11c70529
What: /sys/kernel/debug/scmi/<n>/instance_name
Date: March 2023
KernelVersion: 6.3
Contact: cristian.marussi@arm.com
Description: The name of the underlying SCMI instance <n> described by
all the debugfs accessors rooted at /sys/kernel/debug/scmi/<n>,
expressed as the full name of the top DT SCMI node under which
this SCMI instance is rooted.
Users: Debugging, any userspace test suite
What: /sys/kernel/debug/scmi/<n>/atomic_threshold_us
Date: March 2023
KernelVersion: 6.3
Contact: cristian.marussi@arm.com
Description: An optional time value, expressed in microseconds, representing,
on this SCMI instance <n>, the threshold above which any SCMI
command, advertised to have an higher-than-threshold execution
latency, should not be considered for atomic mode of operation,
even if requested.
Users: Debugging, any userspace test suite
What: /sys/kernel/debug/scmi/<n>/transport/type
Date: March 2023
KernelVersion: 6.3
Contact: cristian.marussi@arm.com
Description: A string representing the type of transport configured for this
SCMI instance <n>.
Users: Debugging, any userspace test suite
What: /sys/kernel/debug/scmi/<n>/transport/is_atomic
Date: March 2023
KernelVersion: 6.3
Contact: cristian.marussi@arm.com
Description: A boolean stating if the transport configured on the underlying
SCMI instance <n> is capable of atomic mode of operation.
Users: Debugging, any userspace test suite
What: /sys/kernel/debug/scmi/<n>/transport/max_rx_timeout_ms
Date: March 2023
KernelVersion: 6.3
Contact: cristian.marussi@arm.com
Description: Timeout in milliseconds allowed for SCMI synchronous replies
for the currently configured SCMI transport for instance <n>.
Users: Debugging, any userspace test suite
What: /sys/kernel/debug/scmi/<n>/transport/max_msg_size
Date: March 2023
KernelVersion: 6.3
Contact: cristian.marussi@arm.com
Description: Max message size of allowed SCMI messages for the currently
configured SCMI transport for instance <n>.
Users: Debugging, any userspace test suite
What: /sys/kernel/debug/scmi/<n>/transport/tx_max_msg
Date: March 2023
KernelVersion: 6.3
Contact: cristian.marussi@arm.com
Description: Max number of concurrently allowed in-flight SCMI messages for
the currently configured SCMI transport for instance <n> on the
TX channels.
Users: Debugging, any userspace test suite
What: /sys/kernel/debug/scmi/<n>/transport/rx_max_msg
Date: March 2023
KernelVersion: 6.3
Contact: cristian.marussi@arm.com
Description: Max number of concurrently allowed in-flight SCMI messages for
the currently configured SCMI transport for instance <n> on the
RX channels.
Users: Debugging, any userspace test suite
Documentation/ABI/testing/debugfs-scmi-raw 0 → 100644
View file @ 11c70529
What: /sys/kernel/debug/scmi/<n>/raw/message
Date: March 2023
KernelVersion: 6.3
Contact: cristian.marussi@arm.com
Description: SCMI Raw synchronous message injection/snooping facility; write
a complete SCMI synchronous command message (header included)
in little-endian binary format to have it sent to the configured
backend SCMI server for instance <n>.
Any subsequently received response can be read from this same
entry if it arrived within the configured timeout.
Each write to the entry causes one command request to be built
and sent while the replies are read back one message at time
(receiving an EOF at each message boundary).
Users: Debugging, any userspace test suite
What: /sys/kernel/debug/scmi/<n>/raw/message_async
Date: March 2023
KernelVersion: 6.3
Contact: cristian.marussi@arm.com
Description: SCMI Raw asynchronous message injection/snooping facility; write
a complete SCMI asynchronous command message (header included)
in little-endian binary format to have it sent to the configured
backend SCMI server for instance <n>.
Any subsequently received response can be read from this same
entry if it arrived within the configured timeout.
Any additional delayed response received afterwards can be read
from this same entry too if it arrived within the configured
timeout.
Each write to the entry causes one command request to be built
and sent while the replies are read back one message at time
(receiving an EOF at each message boundary).
Users: Debugging, any userspace test suite
What: /sys/kernel/debug/scmi/<n>/raw/errors
Date: March 2023
KernelVersion: 6.3
Contact: cristian.marussi@arm.com
Description: SCMI Raw message errors facility; any kind of timed-out or
generally unexpectedly received SCMI message, for instance <n>,
can be read from this entry.
Each read gives back one message at time (receiving an EOF at
each message boundary).
Users: Debugging, any userspace test suite
What: /sys/kernel/debug/scmi/<n>/raw/notification
Date: March 2023
KernelVersion: 6.3
Contact: cristian.marussi@arm.com
Description: SCMI Raw notification snooping facility; any notification
emitted by the backend SCMI server, for instance <n>, can be
read from this entry.
Each read gives back one message at time (receiving an EOF at
each message boundary).
Users: Debugging, any userspace test suite
What: /sys/kernel/debug/scmi/<n>/raw/reset
Date: March 2023
KernelVersion: 6.3
Contact: cristian.marussi@arm.com
Description: SCMI Raw stack reset facility; writing a value to this entry
causes the internal queues of any kind of received message,
still pending to be read out for instance <n>, to be immediately
flushed.
Can be used to reset and clean the SCMI Raw stack between to
different test-run.
Users: Debugging, any userspace test suite
What: /sys/kernel/debug/scmi/<n>/raw/channels/<m>/message
Date: March 2023
KernelVersion: 6.3
Contact: cristian.marussi@arm.com
Description: SCMI Raw synchronous message injection/snooping facility; write
a complete SCMI synchronous command message (header included)
in little-endian binary format to have it sent to the configured
backend SCMI server for instance <n> through the <m> transport
channel.
Any subsequently received response can be read from this same
entry if it arrived on channel <m> within the configured
timeout.
Each write to the entry causes one command request to be built
and sent while the replies are read back one message at time
(receiving an EOF at each message boundary).
Channel identifier <m> matches the SCMI protocol number which
has been associated with this transport channel in the DT
description, with base protocol number 0x10 being the default
channel for this instance.
Note that these per-channel entries rooted at <..>/channels
exist only if the transport is configured to have more than
one default channel.
Users: Debugging, any userspace test suite
What: /sys/kernel/debug/scmi/<n>/raw/channels/<m>/message_async
Date: March 2023
KernelVersion: 6.3
Contact: cristian.marussi@arm.com
Description: SCMI Raw asynchronous message injection/snooping facility; write
a complete SCMI asynchronous command message (header included)
in little-endian binary format to have it sent to the configured
backend SCMI server for instance <n> through the <m> transport
channel.
Any subsequently received response can be read from this same
entry if it arrived on channel <m> within the configured
timeout.
Any additional delayed response received afterwards can be read
from this same entry too if it arrived within the configured
timeout.
Each write to the entry causes one command request to be built
and sent while the replies are read back one message at time
(receiving an EOF at each message boundary).
Channel identifier <m> matches the SCMI protocol number which
has been associated with this transport channel in the DT
description, with base protocol number 0x10 being the default
channel for this instance.
Note that these per-channel entries rooted at <..>/channels
exist only if the transport is configured to have more than
one default channel.
Users: Debugging, any userspace test suite
Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
View file @ 11c70529
......@@ -31,7 +31,11 @@ properties:
- mediatek,mt8173-mmsys
- mediatek,mt8183-mmsys
- mediatek,mt8186-mmsys
- mediatek,mt8188-vdosys0
- mediatek,mt8192-mmsys
- mediatek,mt8195-vdosys1
- mediatek,mt8195-vppsys0
- mediatek,mt8195-vppsys1
- mediatek,mt8365-mmsys
- const: syscon
......
Documentation/devicetree/bindings/firmware/amlogic,meson-gxbb-sm.yaml 0 → 100644
View file @ 11c70529
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/firmware/amlogic,meson-gxbb-sm.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Amlogic Secure Monitor (SM)
description:
In the Amlogic SoCs the Secure Monitor code is used to provide access to the
NVMEM, enable JTAG, set USB boot, etc...
maintainers:
- Neil Armstrong <neil.armstrong@linaro.org>
properties:
compatible:
oneOf:
- const: amlogic,meson-gxbb-sm
- items:
- const: amlogic,meson-gx-sm
- const: amlogic,meson-gxbb-sm
power-controller:
type: object
$ref: /schemas/power/amlogic,meson-sec-pwrc.yaml#
required:
- compatible
additionalProperties: false
examples:
- |
firmware {
secure-monitor {
compatible = "amlogic,meson-gxbb-sm";
};
};
Documentation/devicetree/bindings/firmware/meson/meson_sm.txt deleted 100644 → 0
View file @ d40b2f4c
* Amlogic Secure Monitor
In the Amlogic SoCs the Secure Monitor code is used to provide access to the
NVMEM, enable JTAG, set USB boot, etc...
Required properties for the secure monitor node:
- compatible: Should be "amlogic,meson-gxbb-sm"
Example:
firmware {
sm: secure-monitor {
compatible = "amlogic,meson-gxbb-sm";
};
};
Documentation/devicetree/bindings/firmware/qcom,scm.yaml
View file @ 11c70529
......@@ -38,6 +38,8 @@ properties:
- qcom,scm-msm8994
- qcom,scm-msm8996
- qcom,scm-msm8998
- qcom,scm-qdu1000
- qcom,scm-sa8775p
- qcom,scm-sc7180
- qcom,scm-sc7280
- qcom,scm-sc8280xp
......@@ -53,6 +55,7 @@ properties:
- qcom,scm-sm8250
- qcom,scm-sm8350
- qcom,scm-sm8450
- qcom,scm-sm8550
- qcom,scm-qcs404
- const: qcom,scm
......@@ -73,6 +76,12 @@ properties:
'#reset-cells':
const: 1
interrupts:
description:
The wait-queue interrupt that firmware raises as part of handshake
protocol to handle sleeping SCM calls.
maxItems: 1
qcom,dload-mode:
$ref: /schemas/types.yaml#/definitions/phandle-array
items:
......@@ -82,6 +91,32 @@ properties:
description: TCSR hardware block
allOf:
# Clocks
- if:
properties:
compatible:
contains:
enum:
- qcom,scm-apq8064
- qcom,scm-apq8084
- qcom,scm-mdm9607
- qcom,scm-msm8226
- qcom,scm-msm8660
- qcom,scm-msm8916
- qcom,scm-msm8953
- qcom,scm-msm8960
- qcom,scm-msm8974
- qcom,scm-msm8976
- qcom,scm-sm6375
then:
required:
- clocks
- clock-names
else:
properties:
clock-names: false
clocks: false
- if:
properties:
compatible:
......@@ -100,10 +135,6 @@ allOf:
clocks:
maxItems: 1
required:
- clocks
- clock-names
- if:
properties:
compatible:
......@@ -111,6 +142,7 @@ allOf:
enum:
- qcom,scm-apq8084
- qcom,scm-mdm9607
- qcom,scm-msm8226
- qcom,scm-msm8916
- qcom,scm-msm8953
- qcom,scm-msm8974
......@@ -127,9 +159,31 @@ allOf:
minItems: 3
maxItems: 3
required:
- clocks
- clock-names
# Interconnects
- if:
not:
properties:
compatible:
contains:
enum:
- qcom,scm-sm8450
- qcom,scm-sm8550
then:
properties:
interconnects: false
# Interrupts
- if:
not:
properties:
compatible:
contains:
enum:
- qcom,scm-sm8450
- qcom,scm-sm8550
then:
properties:
interrupts: false
required:
- compatible
......
Documentation/devicetree/bindings/input/mediatek,pmic-keys.yaml
View file @ 11c70529
......@@ -26,6 +26,7 @@ properties:
enum:
- mediatek,mt6323-keys
- mediatek,mt6331-keys
- mediatek,mt6357-keys
- mediatek,mt6358-keys
- mediatek,mt6397-keys
......
Documentation/devicetree/bindings/leds/leds-mt6323.txt
View file @ 11c70529
......@@ -9,7 +9,7 @@ MT6323 PMIC hardware.
For MT6323 MFD bindings see:
Documentation/devicetree/bindings/mfd/mt6397.txt
For MediaTek PMIC wrapper bindings see:
Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
Required properties:
- compatible : Must be "mediatek,mt6323-led"
......
Documentation/devicetree/bindings/mfd/mediatek,mt6357.yaml 0 → 100644
View file @ 11c70529
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/mfd/mediatek,mt6357.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: MediaTek MT6357 PMIC
maintainers:
- Flora Fu <flora.fu@mediatek.com>
- Alexandre Mergnat <amergnat@baylibre.com>
description: |
MT6357 is a power management system chip containing 5 buck
converters and 29 LDOs. Supported features are audio codec,
USB battery charging, fuel gauge, RTC
This is a multifunction device with the following sub modules:
- Regulator
- RTC
- Keys
It is interfaced to host controller using SPI interface by a proprietary hardware
called PMIC wrapper or pwrap. This MFD is a child device of pwrap.
See the following for pwrap node definitions:
Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
properties:
compatible:
const: mediatek,mt6357
interrupts:
maxItems: 1
interrupt-controller: true
"#interrupt-cells":
const: 2
regulators:
type: object
$ref: /schemas/regulator/mediatek,mt6357-regulator.yaml
description:
List of MT6357 BUCKs and LDOs regulators.
rtc:
type: object
$ref: /schemas/rtc/rtc.yaml#
description:
MT6357 Real Time Clock.
properties:
compatible:
const: mediatek,mt6357-rtc
start-year: true
required:
- compatible
keys:
type: object
$ref: /schemas/input/mediatek,pmic-keys.yaml
description:
MT6357 power and home keys.
required:
- compatible
- regulators
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
pwrap {
pmic {
compatible = "mediatek,mt6357";
interrupt-parent = <&pio>;
interrupts = <145 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
regulators {
mt6357_vproc_reg: buck-vproc {
regulator-name = "vproc";
regulator-min-microvolt = <518750>;
regulator-max-microvolt = <1312500>;
regulator-ramp-delay = <6250>;
regulator-enable-ramp-delay = <220>;
regulator-always-on;
};
// ...
mt6357_vusb33_reg: ldo-vusb33 {
regulator-name = "vusb33";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3100000>;
regulator-enable-ramp-delay = <264>;
};
};
rtc {
compatible = "mediatek,mt6357-rtc";
};
keys {
compatible = "mediatek,mt6357-keys";
};
};
};
Documentation/devicetree/bindings/mfd/mt6397.txt
View file @ 11c70529
......@@ -13,7 +13,7 @@ MT6397/MT6323 is a multifunction device with the following sub modules:
It is interfaced to host controller using SPI interface by a proprietary hardware
called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap.
See the following for pwarp node definitions:
../soc/mediatek/pwrap.txt
../soc/mediatek/mediatek,pwrap.yaml
This document describes the binding for MFD device and its sub module.
......
Documentation/devicetree/bindings/mfd/qcom-rpm.txt deleted 100644 → 0
View file @ d40b2f4c
Qualcomm Resource Power Manager (RPM)
This driver is used to interface with the Resource Power Manager (RPM) found in
various Qualcomm platforms. The RPM allows each component in the system to vote
for state of the system resources, such as clocks, regulators and bus
frequencies.
- compatible:
Usage: required
Value type: <string>
Definition: must be one of:
"qcom,rpm-apq8064"
"qcom,rpm-msm8660"
"qcom,rpm-msm8960"
"qcom,rpm-ipq8064"
"qcom,rpm-mdm9615"
- reg:
Usage: required
Value type: <prop-encoded-array>
Definition: base address and size of the RPM's message ram
- interrupts:
Usage: required
Value type: <prop-encoded-array>
Definition: three entries specifying the RPM's:
1. acknowledgement interrupt
2. error interrupt
3. wakeup interrupt
- interrupt-names:
Usage: required
Value type: <string-array>
Definition: must be the three strings "ack", "err" and "wakeup", in order
- qcom,ipc:
Usage: required
Value type: <prop-encoded-array>
Definition: three entries specifying the outgoing ipc bit used for
signaling the RPM:
- phandle to a syscon node representing the apcs registers
- u32 representing offset to the register within the syscon
- u32 representing the ipc bit within the register
= SUBNODES
The RPM exposes resources to its subnodes. The below bindings specify the set
of valid subnodes that can operate on these resources.
== Regulators
Regulator nodes are identified by their compatible:
- compatible:
Usage: required
Value type: <string>
Definition: must be one of:
"qcom,rpm-pm8058-regulators"
"qcom,rpm-pm8901-regulators"
"qcom,rpm-pm8921-regulators"
"qcom,rpm-pm8018-regulators"
"qcom,rpm-smb208-regulators"
- vdd_l0_l1_lvs-supply:
- vdd_l2_l11_l12-supply:
- vdd_l3_l4_l5-supply:
- vdd_l6_l7-supply:
- vdd_l8-supply:
- vdd_l9-supply:
- vdd_l10-supply:
- vdd_l13_l16-supply:
- vdd_l14_l15-supply:
- vdd_l17_l18-supply:
- vdd_l19_l20-supply:
- vdd_l21-supply:
- vdd_l22-supply:
- vdd_l23_l24_l25-supply:
- vdd_ncp-supply:
- vdd_s0-supply:
- vdd_s1-supply:
- vdd_s2-supply:
- vdd_s3-supply:
- vdd_s4-supply:
Usage: optional (pm8058 only)
Value type: <phandle>
Definition: reference to regulator supplying the input pin, as
described in the data sheet
- lvs0_in-supply:
- lvs1_in-supply:
- lvs2_in-supply:
- lvs3_in-supply:
- mvs_in-supply:
- vdd_l0-supply:
- vdd_l1-supply:
- vdd_l2-supply:
- vdd_l3-supply:
- vdd_l4-supply:
- vdd_l5-supply:
- vdd_l6-supply:
- vdd_s0-supply:
- vdd_s1-supply:
- vdd_s2-supply:
- vdd_s3-supply:
- vdd_s4-supply:
Usage: optional (pm8901 only)
Value type: <phandle>
Definition: reference to regulator supplying the input pin, as
described in the data sheet
- vdd_l1_l2_l12_l18-supply:
- vdd_l3_l15_l17-supply:
- vdd_l4_l14-supply:
- vdd_l5_l8_l16-supply:
- vdd_l6_l7-supply:
- vdd_l9_l11-supply:
- vdd_l10_l22-supply:
- vdd_l21_l23_l29-supply:
- vdd_l24-supply:
- vdd_l25-supply:
- vdd_l26-supply:
- vdd_l27-supply:
- vdd_l28-supply:
- vdd_ncp-supply:
- vdd_s1-supply:
- vdd_s2-supply:
- vdd_s4-supply:
- vdd_s5-supply:
- vdd_s6-supply:
- vdd_s7-supply:
- vdd_s8-supply:
- vin_5vs-supply:
- vin_lvs1_3_6-supply:
- vin_lvs2-supply:
- vin_lvs4_5_7-supply:
Usage: optional (pm8921 only)
Value type: <phandle>
Definition: reference to regulator supplying the input pin, as
described in the data sheet
- vin_lvs1-supply:
- vdd_l7-supply:
- vdd_l8-supply:
- vdd_l9_l10_l11_l12-supply:
Usage: optional (pm8018 only)
Value type: <phandle>
Definition: reference to regulator supplying the input pin, as
described in the data sheet
The regulator node houses sub-nodes for each regulator within the device. Each
sub-node is identified using the node's name, with valid values listed for each
of the pmics below.
pm8058:
l0, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15,
l16, l17, l18, l19, l20, l21, l22, l23, l24, l25, s0, s1, s2, s3, s4,
lvs0, lvs1, ncp
pm8901:
l0, l1, l2, l3, l4, l5, l6, s0, s1, s2, s3, s4, lvs0, lvs1, lvs2, lvs3,
mvs
pm8921:
s1, s2, s3, s4, s7, s8, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
l12, l14, l15, l16, l17, l18, l21, l22, l23, l24, l25, l26, l27, l28,
l29, lvs1, lvs2, lvs3, lvs4, lvs5, lvs6, lvs7, usb-switch, hdmi-switch,
ncp
pm8018:
s1, s2, s3, s4, s5, , l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
l12, l14, lvs1
smb208:
s1a, s1b, s2a, s2b
The content of each sub-node is defined by the standard binding for regulators -
see regulator.txt - with additional custom properties described below:
=== Switch-mode Power Supply regulator custom properties
- bias-pull-down:
Usage: optional
Value type: <empty>
Definition: enable pull down of the regulator when inactive
- qcom,switch-mode-frequency:
Usage: required
Value type: <u32>
Definition: Frequency (Hz) of the switch-mode power supply;
must be one of:
19200000, 9600000, 6400000, 4800000, 3840000, 3200000,
2740000, 2400000, 2130000, 1920000, 1750000, 1600000,
1480000, 1370000, 1280000, 1200000
- qcom,force-mode:
Usage: optional (default if no other qcom,force-mode is specified)
Value type: <u32>
Definition: indicates that the regulator should be forced to a
particular mode, valid values are:
QCOM_RPM_FORCE_MODE_NONE - do not force any mode
QCOM_RPM_FORCE_MODE_LPM - force into low power mode
QCOM_RPM_FORCE_MODE_HPM - force into high power mode
QCOM_RPM_FORCE_MODE_AUTO - allow regulator to automatically
select its own mode based on
realtime current draw, only for:
pm8921 smps and ftsmps
- qcom,power-mode-hysteretic:
Usage: optional
Value type: <empty>
Definition: select that the power supply should operate in hysteretic
mode, instead of the default pwm mode
=== Low-dropout regulator custom properties
- bias-pull-down:
Usage: optional
Value type: <empty>
Definition: enable pull down of the regulator when inactive
- qcom,force-mode:
Usage: optional
Value type: <u32>
Definition: indicates that the regulator should not be forced to any
particular mode, valid values are:
QCOM_RPM_FORCE_MODE_NONE - do not force any mode
QCOM_RPM_FORCE_MODE_LPM - force into low power mode
QCOM_RPM_FORCE_MODE_HPM - force into high power mode
QCOM_RPM_FORCE_MODE_BYPASS - set regulator to use bypass
mode, i.e. to act as a switch
and not regulate, only for:
pm8921 pldo, nldo and nldo1200
=== Negative Charge Pump custom properties
- qcom,switch-mode-frequency:
Usage: required
Value type: <u32>
Definition: Frequency (Hz) of the switch mode power supply;
must be one of:
19200000, 9600000, 6400000, 4800000, 3840000, 3200000,
2740000, 2400000, 2130000, 1920000, 1750000, 1600000,
1480000, 1370000, 1280000, 1200000
= EXAMPLE
#include <dt-bindings/mfd/qcom-rpm.h>
rpm@108000 {
compatible = "qcom,rpm-msm8960";
reg = <0x108000 0x1000>;
qcom,ipc = <&apcs 0x8 2>;
interrupts = <0 19 0>, <0 21 0>, <0 22 0>;
interrupt-names = "ack", "err", "wakeup";
regulators {
compatible = "qcom,rpm-pm8921-regulators";
vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
s1 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
bias-pull-down;
qcom,switch-mode-frequency = <3200000>;
};
pm8921_s4: s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <1600000>;
bias-pull-down;
qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
};
};
};
Documentation/devicetree/bindings/phy/samsung,dp-video-phy.yaml
View file @ 11c70529
......@@ -22,13 +22,13 @@ properties:
samsung,pmu-syscon:
$ref: /schemas/types.yaml#/definitions/phandle
deprecated: true
description:
Phandle to PMU system controller interface.
Phandle to PMU system controller interface (if not a child of PMU).
required:
- compatible
- "#phy-cells"
- samsung,pmu-syscon
additionalProperties: false
......@@ -36,6 +36,5 @@ examples:
- |
phy {
compatible = "samsung,exynos5420-dp-video-phy";
samsung,pmu-syscon = <&pmu_system_controller>;
#phy-cells = <0>;
};
Documentation/devicetree/bindings/phy/samsung,mipi-video-phy.yaml
View file @ 11c70529
......@@ -35,15 +35,18 @@ properties:
syscon:
$ref: /schemas/types.yaml#/definitions/phandle
deprecated: true
description:
Phandle to PMU system controller interface, valid only for
samsung,s5pv210-mipi-video-phy and samsung,exynos5420-mipi-video-phy.
samsung,s5pv210-mipi-video-phy and samsung,exynos5420-mipi-video-phy (if
not a child of PMU).
samsung,pmu-syscon:
$ref: /schemas/types.yaml#/definitions/phandle
deprecated: true
description:
Phandle to PMU system controller interface, valid for
samsung,exynos5433-mipi-video-phy.
samsung,exynos5433-mipi-video-phy (if not a child of PMU).
samsung,disp-sysreg:
$ref: /schemas/types.yaml#/definitions/phandle
......@@ -81,13 +84,10 @@ allOf:
samsung,disp-sysreg: false
samsung,cam0-sysreg: false
samsung,cam1-sysreg: false
required:
- syscon
else:
properties:
syscon: false
required:
- samsung,pmu-syscon
- samsung,disp-sysreg
- samsung,cam0-sysreg
- samsung,cam1-sysreg
......@@ -99,7 +99,6 @@ examples:
phy {
compatible = "samsung,exynos5433-mipi-video-phy";
#phy-cells = <1>;
samsung,pmu-syscon = <&pmu_system_controller>;
samsung,cam0-sysreg = <&syscon_cam0>;
samsung,cam1-sysreg = <&syscon_cam1>;
samsung,disp-sysreg = <&syscon_disp>;
......
Documentation/devicetree/bindings/power/allwinner,sun20i-d1-ppu.yaml 0 → 100644
View file @ 11c70529
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/power/allwinner,sun20i-d1-ppu.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Allwinner SoCs PPU power domain controller
maintainers:
- Samuel Holland <samuel@sholland.org>
description:
D1 and related SoCs contain a power domain controller for the CPUs, GPU, and
video-related hardware.
properties:
compatible:
enum:
- allwinner,sun20i-d1-ppu
reg:
maxItems: 1
clocks:
description: Bus Clock
maxItems: 1
resets:
maxItems: 1
'#power-domain-cells':
const: 1
required:
- compatible
- reg
- clocks
- resets
- '#power-domain-cells'
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/sun20i-d1-r-ccu.h>
#include <dt-bindings/reset/sun20i-d1-r-ccu.h>
ppu: power-controller@7001000 {
compatible = "allwinner,sun20i-d1-ppu";
reg = <0x7001000 0x1000>;
clocks = <&r_ccu CLK_BUS_R_PPU>;
resets = <&r_ccu RST_BUS_R_PPU>;
#power-domain-cells = <1>;
};
Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt
View file @ 11c70529
Amlogic Meson Power Controller
==============================
Amlogic Meson Power Controller (deprecated)
===========================================
The Amlogic Meson SoCs embeds an internal Power domain controller.
......
Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
View file @ 11c70529
......@@ -28,6 +28,7 @@ properties:
- mediatek,mt8173-power-controller
- mediatek,mt8183-power-controller
- mediatek,mt8186-power-controller
- mediatek,mt8188-power-controller
- mediatek,mt8192-power-controller
- mediatek,mt8195-power-controller
......@@ -84,6 +85,7 @@ $defs:
"include/dt-bindings/power/mt8167-power.h" - for MT8167 type power domain.
"include/dt-bindings/power/mt8173-power.h" - for MT8173 type power domain.
"include/dt-bindings/power/mt8183-power.h" - for MT8183 type power domain.
"include/dt-bindings/power/mediatek,mt8188-power.h" - for MT8188 type power domain.
"include/dt-bindings/power/mt8192-power.h" - for MT8192 type power domain.
"include/dt-bindings/power/mt8195-power.h" - for MT8195 type power domain.
maxItems: 1
......
Documentation/devicetree/bindings/power/qcom,rpmpd.yaml
View file @ 11c70529
......@@ -30,6 +30,7 @@ properties:
- qcom,qcs404-rpmpd
- qcom,qdu1000-rpmhpd
- qcom,sa8540p-rpmhpd
- qcom,sa8775p-rpmhpd
- qcom,sdm660-rpmpd
- qcom,sc7180-rpmhpd
- qcom,sc7280-rpmhpd
......@@ -39,7 +40,6 @@ properties:
- qcom,sdm845-rpmhpd
- qcom,sdx55-rpmhpd
- qcom,sdx65-rpmhpd
- qcom,sm4250-rpmpd
- qcom,sm6115-rpmpd
- qcom,sm6125-rpmpd
- qcom,sm6350-rpmhpd
......
Documentation/devicetree/bindings/power/starfive,jh7110-pmu.yaml 0 → 100644
View file @ 11c70529
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/power/starfive,jh7110-pmu.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: StarFive JH7110 Power Management Unit
maintainers:
- Walker Chen <walker.chen@starfivetech.com>
description: |
StarFive JH7110 SoC includes support for multiple power domains which can be
powered on/off by software based on different application scenes to save power.
properties:
compatible:
enum:
- starfive,jh7110-pmu
reg:
maxItems: 1
interrupts:
maxItems: 1
"#power-domain-cells":
const: 1
required:
- compatible
- reg
- interrupts
- "#power-domain-cells"
additionalProperties: false
examples:
- |
pwrc: power-controller@17030000 {
compatible = "starfive,jh7110-pmu";
reg = <0x17030000 0x10000>;
interrupts = <111>;
#power-domain-cells = <1>;
};
Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.yaml
View file @ 11c70529
......@@ -27,9 +27,11 @@ properties:
identifier of the client to use this region for buffers
qcom,vmid:
$ref: /schemas/types.yaml#/definitions/uint32
$ref: /schemas/types.yaml#/definitions/uint32-array
description: >
vmid of the remote processor, to set up memory protection
Array of vmids of the remote processors, to set up memory protection
minItems: 1
maxItems: 2
required:
- qcom,client-id
......
Documentation/devicetree/bindings/riscv/sifive,ccache0.yaml
View file @ 11c70529
......@@ -37,6 +37,10 @@ properties:
- sifive,fu540-c000-ccache
- sifive,fu740-c000-ccache
- const: cache
- items:
- const: starfive,jh7110-ccache
- const: sifive,ccache0
- const: cache
- items:
- const: microchip,mpfs-ccache
- const: sifive,fu540-c000-ccache
......@@ -84,6 +88,7 @@ allOf:
contains:
enum:
- sifive,fu740-c000-ccache
- starfive,jh7110-ccache
- microchip,mpfs-ccache
then:
......@@ -104,7 +109,9 @@ allOf:
properties:
compatible:
contains:
const: sifive,fu740-c000-ccache
enum:
- sifive,fu740-c000-ccache
- starfive,jh7110-ccache
then:
properties:
......
Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml
View file @ 11c70529
......@@ -32,6 +32,7 @@ properties:
- mediatek,mt8183-disp-mutex
- mediatek,mt8186-disp-mutex
- mediatek,mt8186-mdp3-mutex
- mediatek,mt8188-disp-mutex
- mediatek,mt8192-disp-mutex
- mediatek,mt8195-disp-mutex
......
Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml 0 → 100644
View file @ 11c70529
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/soc/mediatek/mediatek,pwrap.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Mediatek PMIC Wrapper
maintainers:
- Flora Fu <flora.fu@mediatek.com>
- Alexandre Mergnat <amergnat@baylibre.com>
description:
On MediaTek SoCs the PMIC is connected via SPI. The SPI master interface
is not directly visible to the CPU, but only through the PMIC wrapper
inside the SoC. The communication between the SoC and the PMIC can
optionally be encrypted. Also a non standard Dual IO SPI mode can be
used to increase speed.
IP Pairing
On MT8135 the pins of some SoC internal peripherals can be on the PMIC.
The signals of these pins are routed over the SPI bus using the pwrap
bridge. In the binding description below the properties needed for bridging
are marked with "IP Pairing". These are optional on SoCs which do not support
IP Pairing
properties:
compatible:
oneOf:
- items:
- enum:
- mediatek,mt2701-pwrap
- mediatek,mt6765-pwrap
- mediatek,mt6779-pwrap
- mediatek,mt6797-pwrap
- mediatek,mt6873-pwrap
- mediatek,mt7622-pwrap
- mediatek,mt8135-pwrap
- mediatek,mt8173-pwrap
- mediatek,mt8183-pwrap
- mediatek,mt8186-pwrap
- mediatek,mt8188-pwrap
- mediatek,mt8195-pwrap
- mediatek,mt8365-pwrap
- mediatek,mt8516-pwrap
- items:
- enum:
- mediatek,mt8186-pwrap
- mediatek,mt8195-pwrap
- const: syscon
reg:
minItems: 1
items:
- description: PMIC wrapper registers
- description: IP pairing registers
reg-names:
minItems: 1
items:
- const: pwrap
- const: pwrap-bridge
interrupts:
maxItems: 1
clocks:
minItems: 2
items:
- description: SPI bus clock
- description: Main module clock
- description: System module clock
- description: Timer module clock
clock-names:
minItems: 2
items:
- const: spi
- const: wrap
- const: sys
- const: tmr
resets:
minItems: 1
items:
- description: PMIC wrapper reset
- description: IP pairing reset
reset-names:
minItems: 1
items:
- const: pwrap
- const: pwrap-bridge
pmic:
type: object
required:
- compatible
- reg
- reg-names
- interrupts
- clocks
- clock-names
dependentRequired:
resets: [reset-names]
allOf:
- if:
properties:
compatible:
contains:
const: mediatek,mt8365-pwrap
then:
properties:
clocks:
minItems: 4
clock-names:
minItems: 4
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset/mt8135-resets.h>
soc {
#address-cells = <2>;
#size-cells = <2>;
pwrap@1000f000 {
compatible = "mediatek,mt8135-pwrap";
reg = <0 0x1000f000 0 0x1000>,
<0 0x11017000 0 0x1000>;
reg-names = "pwrap", "pwrap-bridge";
interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk26m>, <&clk26m>;
clock-names = "spi", "wrap";
resets = <&infracfg MT8135_INFRA_PMIC_WRAP_RST>,
<&pericfg MT8135_PERI_PWRAP_BRIDGE_SW_RST>;
reset-names = "pwrap", "pwrap-bridge";
};
};
Documentation/devicetree/bindings/soc/mediatek/pwrap.txt deleted 100644 → 0
View file @ d40b2f4c
MediaTek PMIC Wrapper Driver
This document describes the binding for the MediaTek PMIC wrapper.
On MediaTek SoCs the PMIC is connected via SPI. The SPI master interface
is not directly visible to the CPU, but only through the PMIC wrapper
inside the SoC. The communication between the SoC and the PMIC can
optionally be encrypted. Also a non standard Dual IO SPI mode can be
used to increase speed.
IP Pairing
on MT8135 the pins of some SoC internal peripherals can be on the PMIC.
The signals of these pins are routed over the SPI bus using the pwrap
bridge. In the binding description below the properties needed for bridging
are marked with "IP Pairing". These are optional on SoCs which do not support
IP Pairing
Required properties in pwrap device node.
- compatible:
"mediatek,mt2701-pwrap" for MT2701/7623 SoCs
"mediatek,mt6765-pwrap" for MT6765 SoCs
"mediatek,mt6779-pwrap" for MT6779 SoCs
"mediatek,mt6797-pwrap" for MT6797 SoCs
"mediatek,mt6873-pwrap" for MT6873/8192 SoCs
"mediatek,mt7622-pwrap" for MT7622 SoCs
"mediatek,mt8135-pwrap" for MT8135 SoCs
"mediatek,mt8173-pwrap" for MT8173 SoCs
"mediatek,mt8183-pwrap" for MT8183 SoCs
"mediatek,mt8186-pwrap" for MT8186 SoCs
"mediatek,mt8188-pwrap", "mediatek,mt8195-pwrap" for MT8188 SoCs
"mediatek,mt8195-pwrap" for MT8195 SoCs
"mediatek,mt8365-pwrap" for MT8365 SoCs
"mediatek,mt8516-pwrap" for MT8516 SoCs
- interrupts: IRQ for pwrap in SOC
- reg-names: "pwrap" is required; "pwrap-bridge" is optional.
"pwrap": Main registers base
"pwrap-bridge": bridge base (IP Pairing)
- reg: Must contain an entry for each entry in reg-names.
- clock-names: Must include the following entries:
"spi": SPI bus clock
"wrap": Main module clock
"sys": Optional system module clock
"tmr": Optional timer module clock
- clocks: Must contain an entry for each entry in clock-names.
Optional properities:
- reset-names: Some SoCs include the following entries:
"pwrap"
"pwrap-bridge" (IP Pairing)
- resets: Must contain an entry for each entry in reset-names.
- pmic: Using either MediaTek PMIC MFD as the child device of pwrap
See the following for child node definitions:
Documentation/devicetree/bindings/mfd/mt6397.txt
or the regulator-only device as the child device of pwrap, such as MT6380.
See the following definitions for such kinds of devices.
Documentation/devicetree/bindings/regulator/mt6380-regulator.txt
Example:
pwrap: pwrap@1000f000 {
compatible = "mediatek,mt8135-pwrap";
reg = <0 0x1000f000 0 0x1000>,
<0 0x11017000 0 0x1000>;
reg-names = "pwrap", "pwrap-bridge";
interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
resets = <&infracfg MT8135_INFRA_PMIC_WRAP_RST>,
<&pericfg MT8135_PERI_PWRAP_BRIDGE_SW_RST>;
reset-names = "pwrap", "pwrap-bridge";
clocks = <&clk26m>, <&clk26m>;
clock-names = "spi", "wrap";
pmic {
compatible = "mediatek,mt6397";
};
};
Documentation/devicetree/bindings/soc/qcom/qcom,dcc.yaml 0 → 100644
View file @ 11c70529
# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/soc/qcom/qcom,dcc.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Data Capture and Compare
maintainers:
- Souradeep Chowdhury <quic_schowdhu@quicinc.com>
description: |
DCC (Data Capture and Compare) is a DMA engine which is used to save
configuration data or system memory contents during catastrophic failure
or SW trigger. DCC is used to capture and store data for debugging purpose
properties:
compatible:
items:
- enum:
- qcom,sm8150-dcc
- qcom,sc7280-dcc
- qcom,sc7180-dcc
- qcom,sdm845-dcc
- const: qcom,dcc
reg:
items:
- description: DCC base
- description: DCC RAM base
required:
- compatible
- reg
additionalProperties: false
examples:
- |
dma@10a2000{
compatible = "qcom,sm8150-dcc", "qcom,dcc";
reg = <0x010a2000 0x1000>,
<0x010ad000 0x2000>;
};
Documentation/devicetree/bindings/soc/qcom/qcom,msm8976-ramp-controller.yaml 0 → 100644
View file @ 11c70529
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/soc/qcom/qcom,msm8976-ramp-controller.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Ramp Controller
maintainers:
- AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
description:
The Ramp Controller is used to program the sequence ID for pulse
swallowing, enable sequences and link Sequence IDs (SIDs) for the
CPU cores on some Qualcomm SoCs.
properties:
compatible:
enum:
- qcom,msm8976-ramp-controller
reg:
maxItems: 1
required:
- compatible
- reg
additionalProperties: false
examples:
- |
cpu-power-controller@b014000 {
compatible = "qcom,msm8976-ramp-controller";
reg = <0x0b014000 0x68>;
};
Documentation/devicetree/bindings/soc/qcom/qcom,pmic-glink.yaml 0 → 100644
View file @ 11c70529
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/soc/qcom/qcom,pmic-glink.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm PMIC GLINK firmware interface for battery management, USB
Type-C and other things.
maintainers:
- Bjorn Andersson <andersson@kernel.org>
description:
The PMIC GLINK service, running on a coprocessor on some modern Qualcomm
platforms and implement USB Type-C handling and battery management. This
binding describes the component in the OS used to communicate with the
firmware and connect it's resources to those described in the Devicetree,
particularly the USB Type-C controllers relationship with USB and DisplayPort
components.
properties:
compatible:
items:
- enum:
- qcom,sc8180x-pmic-glink
- qcom,sc8280xp-pmic-glink
- qcom,sm8350-pmic-glink
- const: qcom,pmic-glink
'#address-cells':
const: 1
'#size-cells':
const: 0
patternProperties:
'^connector@\d$':
$ref: /schemas/connector/usb-connector.yaml#
properties:
reg: true
required:
- reg
unevaluatedProperties: false
required:
- compatible
additionalProperties: false
examples:
- |+
pmic-glink {
compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink";
#address-cells = <1>;
#size-cells = <0>;
connector@0 {
compatible = "usb-c-connector";
reg = <0>;
power-role = "dual";
data-role = "dual";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
endpoint {
remote-endpoint = <&usb_role>;
};
};
port@1 {
reg = <1>;
endpoint {
remote-endpoint = <&ss_phy_out>;
};
};
port@2 {
reg = <2>;
endpoint {
remote-endpoint = <&sbu_mux>;
};
};
};
};
};
...
Documentation/devicetree/bindings/soc/qcom/qcom,rpm.yaml 0 → 100644
View file @ 11c70529
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/soc/qcom/qcom,rpm.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Resource Power Manager (RPM)
description:
This driver is used to interface with the Resource Power Manager (RPM) found
in various Qualcomm platforms. The RPM allows each component in the system
to vote for state of the system resources, such as clocks, regulators and bus
frequencies.
maintainers:
- Bjorn Andersson <andersson@kernel.org>
properties:
compatible:
enum:
- qcom,rpm-apq8064
- qcom,rpm-msm8660
- qcom,rpm-msm8960
- qcom,rpm-ipq8064
- qcom,rpm-mdm9615
reg:
maxItems: 1
interrupts:
maxItems: 3
interrupt-names:
items:
- const: ack
- const: err
- const: wakeup
qcom,ipc:
$ref: /schemas/types.yaml#/definitions/phandle-array
items:
- items:
- description: phandle to a syscon node representing the APCS registers
- description: u32 representing offset to the register within the syscon
- description: u32 representing the ipc bit within the register
description:
Three entries specifying the outgoing ipc bit used for signaling the RPM.
patternProperties:
"^regulators(-[01])?$":
type: object
$ref: /schemas/regulator/qcom,rpm-regulator.yaml#
unevaluatedProperties: false
required:
- compatible
- reg
- interrupts
- interrupt-names
- qcom,ipc
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/mfd/qcom-rpm.h>
rpm@108000 {
compatible = "qcom,rpm-msm8960";
reg = <0x108000 0x1000>;
qcom,ipc = <&apcs 0x8 2>;
interrupts = <GIC_SPI 19 IRQ_TYPE_NONE>, <GIC_SPI 21 IRQ_TYPE_NONE>, <GIC_SPI 22 IRQ_TYPE_NONE>;
interrupt-names = "ack", "err", "wakeup";
regulators {
compatible = "qcom,rpm-pm8921-regulators";
vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
s1 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
bias-pull-down;
qcom,switch-mode-frequency = <3200000>;
};
pm8921_s4: s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <1600000>;
bias-pull-down;
qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
};
};
};
Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml
View file @ 11c70529
......@@ -112,8 +112,9 @@ properties:
$ref: /schemas/power/qcom,rpmpd.yaml#
patternProperties:
'-regulators$':
'^regulators(-[0-9])?$':
$ref: /schemas/regulator/qcom,rpmh-regulator.yaml#
unevaluatedProperties: false
required:
- compatible
......
Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
View file @ 11c70529
......@@ -80,6 +80,7 @@ if:
enum:
- qcom,rpm-apq8084
- qcom,rpm-msm8916
- qcom,rpm-msm8936
- qcom,rpm-msm8974
- qcom,rpm-msm8976
- qcom,rpm-msm8953
......
MAINTAINERS
View file @ 11c70529
......@@ -17253,7 +17253,8 @@ F: drivers/clk/qcom/
F: include/dt-bindings/clock/qcom,*
QUALCOMM CORE POWER REDUCTION (CPR) AVS DRIVER
M: Niklas Cassel <nks@flawful.org>
M: Bjorn Andersson <andersson@kernel.org>
M: Konrad Dybcio <konrad.dybcio@linaro.org>
L: linux-pm@vger.kernel.org
L: linux-arm-msm@vger.kernel.org
S: Maintained
......@@ -19947,6 +19948,19 @@ F: Documentation/devicetree/bindings/reset/starfive,jh7100-reset.yaml
F: drivers/reset/reset-starfive-jh7100.c
F: include/dt-bindings/reset/starfive-jh7100.h
STARFIVE JH71XX PMU CONTROLLER DRIVER
M: Walker Chen <walker.chen@starfivetech.com>
S: Supported
F: Documentation/devicetree/bindings/power/starfive*
F: drivers/soc/starfive/jh71xx_pmu.c
F: include/dt-bindings/power/starfive,jh7110-pmu.h
STARFIVE SOC DRIVERS
M: Conor Dooley <conor@kernel.org>
S: Maintained
T: git https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/
F: drivers/soc/starfive/
STARFIVE TRNG DRIVER
M: Jia Jie Ho <jiajie.ho@starfivetech.com>
S: Supported
......
arch/arm/mach-qcom/platsmp.c
View file @ 11c70529
......@@ -14,7 +14,7 @@
#include <linux/of_address.h>
#include <linux/smp.h>
#include <linux/io.h>
#include <linux/qcom_scm.h>
#include <linux/firmware/qcom/qcom_scm.h>
#include <asm/smp_plat.h>
......
drivers/bus/imx-weim.c
View file @ 11c70529
......@@ -263,7 +263,6 @@ static int weim_parse_dt(struct platform_device *pdev)
static int weim_probe(struct platform_device *pdev)
{
struct weim_priv *priv;
struct resource *res;
struct clk *clk;
void __iomem *base;
int ret;
......@@ -273,8 +272,7 @@ static int weim_probe(struct platform_device *pdev)
return -ENOMEM;
/* get the resource */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(&pdev->dev, res);
base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
if (IS_ERR(base))
return PTR_ERR(base);
......
drivers/cpuidle/cpuidle-qcom-spm.c
View file @ 11c70529
......@@ -17,7 +17,7 @@
#include <linux/platform_device.h>
#include <linux/cpuidle.h>
#include <linux/cpu_pm.h>
#include <linux/qcom_scm.h>
#include <linux/firmware/qcom/qcom_scm.h>
#include <soc/qcom/spm.h>
#include <asm/proc-fns.h>
......
drivers/firmware/arm_scmi/Kconfig
View file @ 11c70529
......@@ -23,6 +23,38 @@ config ARM_SCMI_PROTOCOL
if ARM_SCMI_PROTOCOL
config ARM_SCMI_NEED_DEBUGFS
bool
help
This declares whether at least one SCMI facility is configured
which needs debugfs support. When selected causess the creation
of a common SCMI debugfs root directory.
config ARM_SCMI_RAW_MODE_SUPPORT
bool "Enable support for SCMI Raw transmission mode"
depends on DEBUG_FS
select ARM_SCMI_NEED_DEBUGFS
help
Enable support for SCMI Raw transmission mode.
If enabled allows the direct injection and snooping of SCMI bare
messages through a dedicated debugfs interface.
It is meant to be used by SCMI compliance/testing suites.
When enabled regular SCMI drivers interactions are inhibited in
order to avoid unexpected interactions with the SCMI Raw message
flow. If unsure say N.
config ARM_SCMI_RAW_MODE_SUPPORT_COEX
bool "Allow SCMI Raw mode coexistence with normal SCMI stack"
depends on ARM_SCMI_RAW_MODE_SUPPORT
help
Allow SCMI Raw transmission mode to coexist with normal SCMI stack.
This will allow regular SCMI drivers to register with the core and
operate normally, thing which could make an SCMI test suite using the
SCMI Raw mode support unreliable. If unsure, say N.
config ARM_SCMI_HAVE_TRANSPORT
bool
help
......
drivers/firmware/arm_scmi/Makefile
View file @ 11c70529
# SPDX-License-Identifier: GPL-2.0-only
scmi-bus-y = bus.o
scmi-core-objs := $(scmi-bus-y)
scmi-driver-y = driver.o notify.o
scmi-driver-$(CONFIG_ARM_SCMI_RAW_MODE_SUPPORT) += raw_mode.o
scmi-transport-$(CONFIG_ARM_SCMI_HAVE_SHMEM) = shmem.o
scmi-transport-$(CONFIG_ARM_SCMI_TRANSPORT_MAILBOX) += mailbox.o
scmi-transport-$(CONFIG_ARM_SCMI_TRANSPORT_SMC) += smc.o
......@@ -8,9 +11,11 @@ scmi-transport-$(CONFIG_ARM_SCMI_HAVE_MSG) += msg.o
scmi-transport-$(CONFIG_ARM_SCMI_TRANSPORT_VIRTIO) += virtio.o
scmi-transport-$(CONFIG_ARM_SCMI_TRANSPORT_OPTEE) += optee.o
scmi-protocols-y = base.o clock.o perf.o power.o reset.o sensors.o system.o voltage.o powercap.o
scmi-module-objs := $(scmi-bus-y) $(scmi-driver-y) $(scmi-protocols-y) \
$(scmi-transport-y)
scmi-module-objs := $(scmi-driver-y) $(scmi-protocols-y) $(scmi-transport-y)
obj-$(CONFIG_ARM_SCMI_PROTOCOL) += scmi-core.o
obj-$(CONFIG_ARM_SCMI_PROTOCOL) += scmi-module.o
obj-$(CONFIG_ARM_SCMI_POWER_DOMAIN) += scmi_pm_domain.o
obj-$(CONFIG_ARM_SCMI_POWER_CONTROL) += scmi_power_control.o
......
drivers/firmware/arm_scmi/bus.c
View file @ 11c70529
This diff is collapsed.
drivers/firmware/arm_scmi/common.h
View file @ 11c70529
......@@ -27,6 +27,48 @@
#include "protocols.h"
#include "notify.h"
#define SCMI_MAX_CHANNELS 256
#define SCMI_MAX_RESPONSE_TIMEOUT (2 * MSEC_PER_SEC)
enum scmi_error_codes {
SCMI_SUCCESS = 0, /* Success */
SCMI_ERR_SUPPORT = -1, /* Not supported */
SCMI_ERR_PARAMS = -2, /* Invalid Parameters */
SCMI_ERR_ACCESS = -3, /* Invalid access/permission denied */
SCMI_ERR_ENTRY = -4, /* Not found */
SCMI_ERR_RANGE = -5, /* Value out of range */
SCMI_ERR_BUSY = -6, /* Device busy */
SCMI_ERR_COMMS = -7, /* Communication Error */
SCMI_ERR_GENERIC = -8, /* Generic Error */
SCMI_ERR_HARDWARE = -9, /* Hardware Error */
SCMI_ERR_PROTOCOL = -10,/* Protocol Error */
};
static const int scmi_linux_errmap[] = {
/* better than switch case as long as return value is continuous */
0, /* SCMI_SUCCESS */
-EOPNOTSUPP, /* SCMI_ERR_SUPPORT */
-EINVAL, /* SCMI_ERR_PARAM */
-EACCES, /* SCMI_ERR_ACCESS */
-ENOENT, /* SCMI_ERR_ENTRY */
-ERANGE, /* SCMI_ERR_RANGE */
-EBUSY, /* SCMI_ERR_BUSY */
-ECOMM, /* SCMI_ERR_COMMS */
-EIO, /* SCMI_ERR_GENERIC */
-EREMOTEIO, /* SCMI_ERR_HARDWARE */
-EPROTO, /* SCMI_ERR_PROTOCOL */
};
static inline int scmi_to_linux_errno(int errno)
{
int err_idx = -errno;
if (err_idx >= SCMI_SUCCESS && err_idx < ARRAY_SIZE(scmi_linux_errmap))
return scmi_linux_errmap[err_idx];
return -EIO;
}
#define MSG_ID_MASK GENMASK(7, 0)
#define MSG_XTRACT_ID(hdr) FIELD_GET(MSG_ID_MASK, (hdr))
#define MSG_TYPE_MASK GENMASK(9, 8)
......@@ -96,18 +138,19 @@ static inline void unpack_scmi_header(u32 msg_hdr, struct scmi_msg_hdr *hdr)
struct scmi_revision_info *
scmi_revision_area_get(const struct scmi_protocol_handle *ph);
int scmi_handle_put(const struct scmi_handle *handle);
void scmi_device_link_add(struct device *consumer, struct device *supplier);
struct scmi_handle *scmi_handle_get(struct device *dev);
void scmi_set_handle(struct scmi_device *scmi_dev);
void scmi_setup_protocol_implemented(const struct scmi_protocol_handle *ph,
u8 *prot_imp);
int __init scmi_bus_init(void);
void __exit scmi_bus_exit(void);
extern struct bus_type scmi_bus_type;
#define SCMI_BUS_NOTIFY_DEVICE_REQUEST 0
#define SCMI_BUS_NOTIFY_DEVICE_UNREQUEST 1
extern struct blocking_notifier_head scmi_requested_devices_nh;
const struct scmi_protocol *scmi_protocol_get(int protocol_id);
void scmi_protocol_put(int protocol_id);
struct scmi_device *scmi_device_create(struct device_node *np,
struct device *parent, int protocol,
const char *name);
void scmi_device_destroy(struct device *parent, int protocol, const char *name);
int scmi_protocol_acquire(const struct scmi_handle *handle, u8 protocol_id);
void scmi_protocol_release(const struct scmi_handle *handle, u8 protocol_id);
......@@ -116,6 +159,8 @@ void scmi_protocol_release(const struct scmi_handle *handle, u8 protocol_id);
/**
* struct scmi_chan_info - Structure representing a SCMI channel information
*
* @id: An identifier for this channel: this matches the protocol number
* used to initialize this channel
* @dev: Reference to device in the SCMI hierarchy corresponding to this
* channel
* @rx_timeout_ms: The configured RX timeout in milliseconds.
......@@ -127,6 +172,7 @@ void scmi_protocol_release(const struct scmi_handle *handle, u8 protocol_id);
* @transport_info: Transport layer related information
*/
struct scmi_chan_info {
int id;
struct device *dev;
unsigned int rx_timeout_ms;
struct scmi_handle *handle;
......@@ -153,7 +199,7 @@ struct scmi_chan_info {
*/
struct scmi_transport_ops {
int (*link_supplier)(struct device *dev);
bool (*chan_available)(struct device *dev, int idx);
bool (*chan_available)(struct device_node *of_node, int idx);
int (*chan_setup)(struct scmi_chan_info *cinfo, struct device *dev,
bool tx);
int (*chan_free)(int id, void *p, void *data);
......@@ -170,11 +216,6 @@ struct scmi_transport_ops {
bool (*poll_done)(struct scmi_chan_info *cinfo, struct scmi_xfer *xfer);
};
int scmi_protocol_device_request(const struct scmi_device_id *id_table);
void scmi_protocol_device_unrequest(const struct scmi_device_id *id_table);
struct scmi_device *scmi_child_dev_find(struct device *parent,
int prot_id, const char *name);
/**
* struct scmi_desc - Description of SoC integration
*
......@@ -215,6 +256,36 @@ struct scmi_desc {
const bool atomic_enabled;
};
static inline bool is_polling_required(struct scmi_chan_info *cinfo,
const struct scmi_desc *desc)
{
return cinfo->no_completion_irq || desc->force_polling;
}
static inline bool is_transport_polling_capable(const struct scmi_desc *desc)
{
return desc->ops->poll_done || desc->sync_cmds_completed_on_ret;
}
static inline bool is_polling_enabled(struct scmi_chan_info *cinfo,
const struct scmi_desc *desc)
{
return is_polling_required(cinfo, desc) &&
is_transport_polling_capable(desc);
}
void scmi_xfer_raw_put(const struct scmi_handle *handle,
struct scmi_xfer *xfer);
struct scmi_xfer *scmi_xfer_raw_get(const struct scmi_handle *handle);
struct scmi_chan_info *
scmi_xfer_raw_channel_get(const struct scmi_handle *handle, u8 protocol_id);
int scmi_xfer_raw_inflight_register(const struct scmi_handle *handle,
struct scmi_xfer *xfer);
int scmi_xfer_raw_wait_for_message_response(struct scmi_chan_info *cinfo,
struct scmi_xfer *xfer,
unsigned int timeout_ms);
#ifdef CONFIG_ARM_SCMI_TRANSPORT_MAILBOX
extern const struct scmi_desc scmi_mailbox_desc;
#endif
......@@ -229,7 +300,6 @@ extern const struct scmi_desc scmi_optee_desc;
#endif
void scmi_rx_callback(struct scmi_chan_info *cinfo, u32 msg_hdr, void *priv);
void scmi_free_channel(struct scmi_chan_info *cinfo, struct idr *idr, int id);
/* shmem related declarations */
struct scmi_shared_mem;
......
drivers/firmware/arm_scmi/driver.c
View file @ 11c70529
This diff is collapsed.
drivers/firmware/arm_scmi/mailbox.c
View file @ 11c70529
......@@ -46,9 +46,9 @@ static void rx_callback(struct mbox_client *cl, void *m)
scmi_rx_callback(smbox->cinfo, shmem_read_header(smbox->shmem), NULL);
}
static bool mailbox_chan_available(struct device *dev, int idx)
static bool mailbox_chan_available(struct device_node *of_node, int idx)
{
return !of_parse_phandle_with_args(dev->of_node, "mboxes",
return !of_parse_phandle_with_args(of_node, "mboxes",
"#mbox-cells", idx, NULL);
}
......@@ -120,8 +120,6 @@ static int mailbox_chan_free(int id, void *p, void *data)
smbox->cinfo = NULL;
}
scmi_free_channel(cinfo, data, id);
return 0;
}
......
drivers/firmware/arm_scmi/optee.c
View file @ 11c70529
......@@ -328,11 +328,11 @@ static int scmi_optee_link_supplier(struct device *dev)
return 0;
}
static bool scmi_optee_chan_available(struct device *dev, int idx)
static bool scmi_optee_chan_available(struct device_node *of_node, int idx)
{
u32 channel_id;
return !of_property_read_u32_index(dev->of_node, "linaro,optee-channel-id",
return !of_property_read_u32_index(of_node, "linaro,optee-channel-id",
idx, &channel_id);
}
......@@ -481,8 +481,6 @@ static int scmi_optee_chan_free(int id, void *p, void *data)
cinfo->transport_info = NULL;
channel->cinfo = NULL;
scmi_free_channel(cinfo, data, id);
return 0;
}
......
drivers/firmware/arm_scmi/protocols.h
View file @ 11c70529
......@@ -115,6 +115,7 @@ struct scmi_msg_hdr {
* - SCMI_XFER_SENT_OK -> SCMI_XFER_RESP_OK [ -> SCMI_XFER_DRESP_OK ]
* - SCMI_XFER_SENT_OK -> SCMI_XFER_DRESP_OK
* (Missing synchronous response is assumed OK and ignored)
* @flags: Optional flags associated to this xfer.
* @lock: A spinlock to protect state and busy fields.
* @priv: A pointer for transport private usage.
*/
......@@ -135,6 +136,12 @@ struct scmi_xfer {
#define SCMI_XFER_RESP_OK 1
#define SCMI_XFER_DRESP_OK 2
int state;
#define SCMI_XFER_FLAG_IS_RAW BIT(0)
#define SCMI_XFER_IS_RAW(x) ((x)->flags & SCMI_XFER_FLAG_IS_RAW)
#define SCMI_XFER_FLAG_CHAN_SET BIT(1)
#define SCMI_XFER_IS_CHAN_SET(x) \
((x)->flags & SCMI_XFER_FLAG_CHAN_SET)
int flags;
/* A lock to protect state and busy fields */
spinlock_t lock;
void *priv;
......
drivers/firmware/arm_scmi/raw_mode.c 0 → 100644
View file @ 11c70529
This diff is collapsed.
drivers/firmware/arm_scmi/raw_mode.h 0 → 100644
View file @ 11c70529
/* SPDX-License-Identifier: GPL-2.0 */
/*
* System Control and Management Interface (SCMI) Message Protocol
* Raw mode support header.
*
* Copyright (C) 2022 ARM Ltd.
*/
#ifndef _SCMI_RAW_MODE_H
#define _SCMI_RAW_MODE_H
#include "common.h"
enum {
SCMI_RAW_REPLY_QUEUE,
SCMI_RAW_NOTIF_QUEUE,
SCMI_RAW_ERRS_QUEUE,
SCMI_RAW_MAX_QUEUE
};
void *scmi_raw_mode_init(const struct scmi_handle *handle,
struct dentry *top_dentry, int instance_id,
u8 *channels, int num_chans,
const struct scmi_desc *desc, int tx_max_msg);
void scmi_raw_mode_cleanup(void *raw);
void scmi_raw_message_report(void *raw, struct scmi_xfer *xfer,
unsigned int idx, unsigned int chan_id);
void scmi_raw_error_report(void *raw, struct scmi_chan_info *cinfo,
u32 msg_hdr, void *priv);
#endif /* _SCMI_RAW_MODE_H */
drivers/firmware/arm_scmi/smc.c
View file @ 11c70529
......@@ -52,9 +52,9 @@ static irqreturn_t smc_msg_done_isr(int irq, void *data)
return IRQ_HANDLED;
}
static bool smc_chan_available(struct device *dev, int idx)
static bool smc_chan_available(struct device_node *of_node, int idx)
{
struct device_node *np = of_parse_phandle(dev->of_node, "shmem", 0);
struct device_node *np = of_parse_phandle(of_node, "shmem", 0);
if (!np)
return false;
......@@ -171,8 +171,6 @@ static int smc_chan_free(int id, void *p, void *data)
cinfo->transport_info = NULL;
scmi_info->cinfo = NULL;
scmi_free_channel(cinfo, data, id);
return 0;
}
......
drivers/firmware/arm_scmi/virtio.c
View file @ 11c70529
......@@ -385,7 +385,7 @@ static int virtio_link_supplier(struct device *dev)
return 0;
}
static bool virtio_chan_available(struct device *dev, int idx)
static bool virtio_chan_available(struct device_node *of_node, int idx)
{
struct scmi_vio_channel *channels, *vioch = NULL;
......@@ -489,8 +489,6 @@ static int virtio_chan_free(int id, void *p, void *data)
virtio_break_device(vioch->vqueue->vdev);
scmi_vio_channel_cleanup_sync(vioch);
scmi_free_channel(cinfo, data, id);
return 0;
}
......
drivers/firmware/meson/meson_sm.c
View file @ 11c70529
......@@ -82,7 +82,7 @@ static void __iomem *meson_sm_map_shmem(u32 cmd_shmem, unsigned int size)
sm_phy_base = __meson_sm_call(cmd_shmem, 0, 0, 0, 0, 0);
if (!sm_phy_base)
return 0;
return NULL;
return ioremap_cache(sm_phy_base, size);
}
......
drivers/firmware/qcom_scm-legacy.c
View file @ 11c70529
......@@ -9,7 +9,7 @@
#include <linux/mutex.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/qcom_scm.h>
#include <linux/firmware/qcom/qcom_scm.h>
#include <linux/arm-smccc.h>
#include <linux/dma-mapping.h>
......
drivers/firmware/qcom_scm-smc.c
View file @ 11c70529
......@@ -8,7 +8,7 @@
#include <linux/mutex.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/qcom_scm.h>
#include <linux/firmware/qcom/qcom_scm.h>
#include <linux/arm-smccc.h>
#include <linux/dma-mapping.h>
......@@ -52,29 +52,97 @@ static void __scm_smc_do_quirk(const struct arm_smccc_args *smc,
} while (res->a0 == QCOM_SCM_INTERRUPTED);
}
static void __scm_smc_do(const struct arm_smccc_args *smc,
struct arm_smccc_res *res, bool atomic)
static void fill_wq_resume_args(struct arm_smccc_args *resume, u32 smc_call_ctx)
{
int retry_count = 0;
memset(resume->args, 0, sizeof(resume->args[0]) * ARRAY_SIZE(resume->args));
resume->args[0] = ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL,
ARM_SMCCC_SMC_64, ARM_SMCCC_OWNER_SIP,
SCM_SMC_FNID(QCOM_SCM_SVC_WAITQ, QCOM_SCM_WAITQ_RESUME));
resume->args[1] = QCOM_SCM_ARGS(1);
resume->args[2] = smc_call_ctx;
}
int scm_get_wq_ctx(u32 *wq_ctx, u32 *flags, u32 *more_pending)
{
int ret;
struct arm_smccc_res get_wq_res;
struct arm_smccc_args get_wq_ctx = {0};
get_wq_ctx.args[0] = ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL,
ARM_SMCCC_SMC_64, ARM_SMCCC_OWNER_SIP,
SCM_SMC_FNID(QCOM_SCM_SVC_WAITQ, QCOM_SCM_WAITQ_GET_WQ_CTX));
/* Guaranteed to return only success or error, no WAITQ_* */
__scm_smc_do_quirk(&get_wq_ctx, &get_wq_res);
ret = get_wq_res.a0;
if (ret)
return ret;
*wq_ctx = get_wq_res.a1;
*flags = get_wq_res.a2;
*more_pending = get_wq_res.a3;
return 0;
}
static int __scm_smc_do_quirk_handle_waitq(struct device *dev, struct arm_smccc_args *waitq,
struct arm_smccc_res *res)
{
int ret;
u32 wq_ctx, smc_call_ctx;
struct arm_smccc_args resume;
struct arm_smccc_args *smc = waitq;
do {
__scm_smc_do_quirk(smc, res);
if (res->a0 == QCOM_SCM_WAITQ_SLEEP) {
wq_ctx = res->a1;
smc_call_ctx = res->a2;
ret = qcom_scm_wait_for_wq_completion(wq_ctx);
if (ret)
return ret;
fill_wq_resume_args(&resume, smc_call_ctx);
smc = &resume;
}
} while (res->a0 == QCOM_SCM_WAITQ_SLEEP);
return 0;
}
static int __scm_smc_do(struct device *dev, struct arm_smccc_args *smc,
struct arm_smccc_res *res, bool atomic)
{
int ret, retry_count = 0;
if (atomic) {
__scm_smc_do_quirk(smc, res);
return;
return 0;
}
do {
mutex_lock(&qcom_scm_lock);
__scm_smc_do_quirk(smc, res);
ret = __scm_smc_do_quirk_handle_waitq(dev, smc, res);
mutex_unlock(&qcom_scm_lock);
if (ret)
return ret;
if (res->a0 == QCOM_SCM_V2_EBUSY) {
if (retry_count++ > QCOM_SCM_EBUSY_MAX_RETRY)
break;
msleep(QCOM_SCM_EBUSY_WAIT_MS);
}
} while (res->a0 == QCOM_SCM_V2_EBUSY);
return 0;
}
......@@ -83,7 +151,7 @@ int __scm_smc_call(struct device *dev, const struct qcom_scm_desc *desc,
struct qcom_scm_res *res, bool atomic)
{
int arglen = desc->arginfo & 0xf;
int i;
int i, ret;
dma_addr_t args_phys = 0;
void *args_virt = NULL;
size_t alloc_len;
......@@ -135,13 +203,17 @@ int __scm_smc_call(struct device *dev, const struct qcom_scm_desc *desc,
smc.args[SCM_SMC_LAST_REG_IDX] = args_phys;
}
__scm_smc_do(&smc, &smc_res, atomic);
/* ret error check follows after args_virt cleanup*/
ret = __scm_smc_do(dev, &smc, &smc_res, atomic);
if (args_virt) {
dma_unmap_single(dev, args_phys, alloc_len, DMA_TO_DEVICE);
kfree(args_virt);
}
if (ret)
return ret;
if (res) {
res->result[0] = smc_res.a1;
res->result[1] = smc_res.a2;
......
drivers/firmware/qcom_scm.c
View file @ 11c70529
......@@ -4,15 +4,18 @@
*/
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/completion.h>
#include <linux/cpumask.h>
#include <linux/export.h>
#include <linux/dma-mapping.h>
#include <linux/interconnect.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/qcom_scm.h>
#include <linux/firmware/qcom/qcom_scm.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/clk.h>
#include <linux/reset-controller.h>
......@@ -33,6 +36,7 @@ struct qcom_scm {
struct clk *iface_clk;
struct clk *bus_clk;
struct icc_path *path;
struct completion waitq_comp;
struct reset_controller_dev reset;
/* control access to the interconnect path */
......@@ -63,6 +67,9 @@ static const u8 qcom_scm_cpu_warm_bits[QCOM_SCM_BOOT_MAX_CPUS] = {
BIT(2), BIT(1), BIT(4), BIT(6)
};
#define QCOM_SMC_WAITQ_FLAG_WAKE_ONE BIT(0)
#define QCOM_SMC_WAITQ_FLAG_WAKE_ALL BIT(1)
static const char * const qcom_scm_convention_names[] = {
[SMC_CONVENTION_UNKNOWN] = "unknown",
[SMC_CONVENTION_ARM_32] = "smc arm 32",
......@@ -1325,11 +1332,79 @@ bool qcom_scm_is_available(void)
}
EXPORT_SYMBOL(qcom_scm_is_available);
static int qcom_scm_assert_valid_wq_ctx(u32 wq_ctx)
{
/* FW currently only supports a single wq_ctx (zero).
* TODO: Update this logic to include dynamic allocation and lookup of
* completion structs when FW supports more wq_ctx values.
*/
if (wq_ctx != 0) {
dev_err(__scm->dev, "Firmware unexpectedly passed non-zero wq_ctx\n");
return -EINVAL;
}
return 0;
}
int qcom_scm_wait_for_wq_completion(u32 wq_ctx)
{
int ret;
ret = qcom_scm_assert_valid_wq_ctx(wq_ctx);
if (ret)
return ret;
wait_for_completion(&__scm->waitq_comp);
return 0;
}
static int qcom_scm_waitq_wakeup(struct qcom_scm *scm, unsigned int wq_ctx)
{
int ret;
ret = qcom_scm_assert_valid_wq_ctx(wq_ctx);
if (ret)
return ret;
complete(&__scm->waitq_comp);
return 0;
}
static irqreturn_t qcom_scm_irq_handler(int irq, void *data)
{
int ret;
struct qcom_scm *scm = data;
u32 wq_ctx, flags, more_pending = 0;
do {
ret = scm_get_wq_ctx(&wq_ctx, &flags, &more_pending);
if (ret) {
dev_err(scm->dev, "GET_WQ_CTX SMC call failed: %d\n", ret);
goto out;
}
if (flags != QCOM_SMC_WAITQ_FLAG_WAKE_ONE &&
flags != QCOM_SMC_WAITQ_FLAG_WAKE_ALL) {
dev_err(scm->dev, "Invalid flags found for wq_ctx: %u\n", flags);
goto out;
}
ret = qcom_scm_waitq_wakeup(scm, wq_ctx);
if (ret)
goto out;
} while (more_pending);
out:
return IRQ_HANDLED;
}
static int qcom_scm_probe(struct platform_device *pdev)
{
struct qcom_scm *scm;
unsigned long clks;
int ret;
int irq, ret;
scm = devm_kzalloc(&pdev->dev, sizeof(*scm), GFP_KERNEL);
if (!scm)
......@@ -1402,6 +1477,19 @@ static int qcom_scm_probe(struct platform_device *pdev)
__scm = scm;
__scm->dev = &pdev->dev;
init_completion(&__scm->waitq_comp);
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
if (irq != -ENXIO)
return irq;
} else {
ret = devm_request_threaded_irq(__scm->dev, irq, NULL, qcom_scm_irq_handler,
IRQF_ONESHOT, "qcom-scm", __scm);
if (ret < 0)
return dev_err_probe(scm->dev, ret, "Failed to request qcom-scm irq\n");
}
__get_convention();
/*
......
drivers/firmware/qcom_scm.h
View file @ 11c70529
......@@ -60,6 +60,9 @@ struct qcom_scm_res {
u64 result[MAX_QCOM_SCM_RETS];
};
int qcom_scm_wait_for_wq_completion(u32 wq_ctx);
int scm_get_wq_ctx(u32 *wq_ctx, u32 *flags, u32 *more_pending);
#define SCM_SMC_FNID(s, c) ((((s) & 0xFF) << 8) | ((c) & 0xFF))
extern int __scm_smc_call(struct device *dev, const struct qcom_scm_desc *desc,
enum qcom_scm_convention qcom_convention,
......@@ -129,6 +132,10 @@ extern int scm_legacy_call(struct device *dev, const struct qcom_scm_desc *desc,
#define QCOM_SCM_SMMU_CONFIG_ERRATA1 0x03
#define QCOM_SCM_SMMU_CONFIG_ERRATA1_CLIENT_ALL 0x02
#define QCOM_SCM_SVC_WAITQ 0x24
#define QCOM_SCM_WAITQ_RESUME 0x02
#define QCOM_SCM_WAITQ_GET_WQ_CTX 0x03
/* common error codes */
#define QCOM_SCM_V2_EBUSY -12
#define QCOM_SCM_ENOMEM -5
......@@ -137,6 +144,7 @@ extern int scm_legacy_call(struct device *dev, const struct qcom_scm_desc *desc,
#define QCOM_SCM_EINVAL_ARG -2
#define QCOM_SCM_ERROR -1
#define QCOM_SCM_INTERRUPTED 1
#define QCOM_SCM_WAITQ_SLEEP 2
static inline int qcom_scm_remap_error(int err)
{
......
drivers/firmware/xilinx/zynqmp.c
View file @ 11c70529
......@@ -738,8 +738,31 @@ EXPORT_SYMBOL_GPL(zynqmp_pm_get_pll_frac_data);
*/
int zynqmp_pm_set_sd_tapdelay(u32 node_id, u32 type, u32 value)
{
return zynqmp_pm_invoke_fn(PM_IOCTL, node_id, IOCTL_SET_SD_TAPDELAY,
type, value, NULL);
u32 reg = (type == PM_TAPDELAY_INPUT) ? SD_ITAPDLY : SD_OTAPDLYSEL;
u32 mask = (node_id == NODE_SD_0) ? GENMASK(15, 0) : GENMASK(31, 16);
if (value) {
return zynqmp_pm_invoke_fn(PM_IOCTL, node_id,
IOCTL_SET_SD_TAPDELAY,
type, value, NULL);
}
/*
* Work around completely misdesigned firmware API on Xilinx ZynqMP.
* The IOCTL_SET_SD_TAPDELAY firmware call allows the caller to only
* ever set IOU_SLCR SD_ITAPDLY Register SD0_ITAPDLYENA/SD1_ITAPDLYENA
* bits, but there is no matching call to clear those bits. If those
* bits are not cleared, SDMMC tuning may fail.
*
* Luckily, there are PM_MMIO_READ/PM_MMIO_WRITE calls which seem to
* allow complete unrestricted access to all address space, including
* IOU_SLCR SD_ITAPDLY Register and all the other registers, access
* to which was supposed to be protected by the current firmware API.
*
* Use PM_MMIO_READ/PM_MMIO_WRITE to re-implement the missing counter
* part of IOCTL_SET_SD_TAPDELAY which clears SDx_ITAPDLYENA bits.
*/
return zynqmp_pm_invoke_fn(PM_MMIO_WRITE, reg, mask, 0, 0, NULL);
}
EXPORT_SYMBOL_GPL(zynqmp_pm_set_sd_tapdelay);
......
drivers/gpu/drm/msm/adreno/a5xx_gpu.c
View file @ 11c70529
......@@ -5,7 +5,7 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/cpumask.h>
#include <linux/qcom_scm.h>
#include <linux/firmware/qcom/qcom_scm.h>
#include <linux/pm_opp.h>
#include <linux/nvmem-consumer.h>
#include <linux/slab.h>
......
drivers/gpu/drm/msm/adreno/adreno_gpu.c
View file @ 11c70529
......@@ -8,7 +8,7 @@
#include <linux/ascii85.h>
#include <linux/interconnect.h>
#include <linux/qcom_scm.h>
#include <linux/firmware/qcom/qcom_scm.h>
#include <linux/kernel.h>
#include <linux/of_address.h>
#include <linux/pm_opp.h>
......
drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c
View file @ 11c70529
......@@ -3,7 +3,7 @@
*/
#include "hdmi.h"
#include <linux/qcom_scm.h>
#include <linux/firmware/qcom/qcom_scm.h>
#define HDCP_REG_ENABLE 0x01
#define HDCP_REG_DISABLE 0x00
......
drivers/input/keyboard/mtk-pmic-keys.c
View file @ 11c70529
......@@ -10,6 +10,7 @@
#include <linux/kernel.h>
#include <linux/mfd/mt6323/registers.h>
#include <linux/mfd/mt6331/registers.h>
#include <linux/mfd/mt6357/registers.h>
#include <linux/mfd/mt6358/registers.h>
#include <linux/mfd/mt6397/core.h>
#include <linux/mfd/mt6397/registers.h>
......@@ -90,6 +91,19 @@ static const struct mtk_pmic_regs mt6331_regs = {
.rst_lprst_mask = MTK_PMIC_MT6331_RST_DU_MASK,
};
static const struct mtk_pmic_regs mt6357_regs = {
.keys_regs[MTK_PMIC_PWRKEY_INDEX] =
MTK_PMIC_KEYS_REGS(MT6357_TOPSTATUS,
0x2, MT6357_PSC_TOP_INT_CON0, 0x5,
MTK_PMIC_PWRKEY_RST),
.keys_regs[MTK_PMIC_HOMEKEY_INDEX] =
MTK_PMIC_KEYS_REGS(MT6357_TOPSTATUS,
0x8, MT6357_PSC_TOP_INT_CON0, 0xa,
MTK_PMIC_HOMEKEY_INDEX),
.pmic_rst_reg = MT6357_TOP_RST_MISC,
.rst_lprst_mask = MTK_PMIC_RST_DU_MASK,
};
static const struct mtk_pmic_regs mt6358_regs = {
.keys_regs[MTK_PMIC_PWRKEY_INDEX] =
MTK_PMIC_KEYS_REGS(MT6358_TOPSTATUS,
......@@ -276,6 +290,9 @@ static const struct of_device_id of_mtk_pmic_keys_match_tbl[] = {
}, {
.compatible = "mediatek,mt6331-keys",
.data = &mt6331_regs,
}, {
.compatible = "mediatek,mt6357-keys",
.data = &mt6357_regs,
}, {
.compatible = "mediatek,mt6358-keys",
.data = &mt6358_regs,
......
drivers/iommu/arm/arm-smmu/arm-smmu-qcom-debug.c
View file @ 11c70529
......@@ -4,7 +4,7 @@
*/
#include <linux/of_device.h>
#include <linux/qcom_scm.h>
#include <linux/firmware/qcom/qcom_scm.h>
#include <linux/ratelimit.h>
#include "arm-smmu.h"
......
drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
View file @ 11c70529
......@@ -7,7 +7,7 @@
#include <linux/adreno-smmu-priv.h>
#include <linux/delay.h>
#include <linux/of_device.h>
#include <linux/qcom_scm.h>
#include <linux/firmware/qcom/qcom_scm.h>
#include "arm-smmu.h"
#include "arm-smmu-qcom.h"
......
drivers/iommu/arm/arm-smmu/qcom_iommu.c
View file @ 11c70529
......@@ -27,7 +27,7 @@
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
#include <linux/qcom_scm.h>
#include <linux/firmware/qcom/qcom_scm.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
......
drivers/media/platform/qcom/venus/firmware.c
View file @ 11c70529
......@@ -12,7 +12,7 @@
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/of_device.h>
#include <linux/qcom_scm.h>
#include <linux/firmware/qcom/qcom_scm.h>
#include <linux/sizes.h>
#include <linux/soc/qcom/mdt_loader.h>
......
drivers/memory/renesas-rpc-if.c
View file @ 11c70529
......@@ -163,14 +163,36 @@ static const struct regmap_access_table rpcif_volatile_table = {
.n_yes_ranges = ARRAY_SIZE(rpcif_volatile_ranges),
};
struct rpcif_priv {
struct device *dev;
void __iomem *base;
void __iomem *dirmap;
struct regmap *regmap;
struct reset_control *rstc;
struct platform_device *vdev;
size_t size;
enum rpcif_type type;
enum rpcif_data_dir dir;
u8 bus_size;
u8 xfer_size;
void *buffer;
u32 xferlen;
u32 smcr;
u32 smadr;
u32 command; /* DRCMR or SMCMR */
u32 option; /* DROPR or SMOPR */
u32 enable; /* DRENR or SMENR */
u32 dummy; /* DRDMCR or SMDMCR */
u32 ddr; /* DRDRENR or SMDRENR */
};
/*
* Custom accessor functions to ensure SM[RW]DR[01] are always accessed with
* proper width. Requires rpcif.xfer_size to be correctly set before!
* proper width. Requires rpcif_priv.xfer_size to be correctly set before!
*/
static int rpcif_reg_read(void *context, unsigned int reg, unsigned int *val)
{
struct rpcif *rpc = context;
struct rpcif_priv *rpc = context;
switch (reg) {
case RPCIF_SMRDR0:
......@@ -206,7 +228,7 @@ static int rpcif_reg_read(void *context, unsigned int reg, unsigned int *val)
static int rpcif_reg_write(void *context, unsigned int reg, unsigned int val)
{
struct rpcif *rpc = context;
struct rpcif_priv *rpc = context;
switch (reg) {
case RPCIF_SMWDR0:
......@@ -253,39 +275,18 @@ static const struct regmap_config rpcif_regmap_config = {
.volatile_table = &rpcif_volatile_table,
};
int rpcif_sw_init(struct rpcif *rpc, struct device *dev)
int rpcif_sw_init(struct rpcif *rpcif, struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct resource *res;
struct rpcif_priv *rpc = dev_get_drvdata(dev);
rpc->dev = dev;
rpc->base = devm_platform_ioremap_resource_byname(pdev, "regs");
if (IS_ERR(rpc->base))
return PTR_ERR(rpc->base);
rpc->regmap = devm_regmap_init(&pdev->dev, NULL, rpc, &rpcif_regmap_config);
if (IS_ERR(rpc->regmap)) {
dev_err(&pdev->dev,
"failed to init regmap for rpcif, error %ld\n",
PTR_ERR(rpc->regmap));
return PTR_ERR(rpc->regmap);
}
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dirmap");
rpc->dirmap = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(rpc->dirmap))
return PTR_ERR(rpc->dirmap);
rpc->size = resource_size(res);
rpc->type = (uintptr_t)of_device_get_match_data(dev);
rpc->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
return PTR_ERR_OR_ZERO(rpc->rstc);
rpcif->dev = dev;
rpcif->dirmap = rpc->dirmap;
rpcif->size = rpc->size;
return 0;
}
EXPORT_SYMBOL(rpcif_sw_init);
static void rpcif_rzg2l_timing_adjust_sdr(struct rpcif *rpc)
static void rpcif_rzg2l_timing_adjust_sdr(struct rpcif_priv *rpc)
{
regmap_write(rpc->regmap, RPCIF_PHYWR, 0xa5390000);
regmap_write(rpc->regmap, RPCIF_PHYADD, 0x80000000);
......@@ -299,15 +300,17 @@ static void rpcif_rzg2l_timing_adjust_sdr(struct rpcif *rpc)
regmap_write(rpc->regmap, RPCIF_PHYADD, 0x80000032);
}
int rpcif_hw_init(struct rpcif *rpc, bool hyperflash)
int rpcif_hw_init(struct device *dev, bool hyperflash)
{
struct rpcif_priv *rpc = dev_get_drvdata(dev);
u32 dummy;
int ret;
pm_runtime_get_sync(rpc->dev);
ret = pm_runtime_resume_and_get(dev);
if (ret)
return ret;
if (rpc->type == RPCIF_RZ_G2L) {
int ret;
ret = reset_control_reset(rpc->rstc);
if (ret)
return ret;
......@@ -356,7 +359,7 @@ int rpcif_hw_init(struct rpcif *rpc, bool hyperflash)
regmap_write(rpc->regmap, RPCIF_SSLDR, RPCIF_SSLDR_SPNDL(7) |
RPCIF_SSLDR_SLNDL(7) | RPCIF_SSLDR_SCKDL(7));
pm_runtime_put(rpc->dev);
pm_runtime_put(dev);
rpc->bus_size = hyperflash ? 2 : 1;
......@@ -364,7 +367,7 @@ int rpcif_hw_init(struct rpcif *rpc, bool hyperflash)
}
EXPORT_SYMBOL(rpcif_hw_init);
static int wait_msg_xfer_end(struct rpcif *rpc)
static int wait_msg_xfer_end(struct rpcif_priv *rpc)
{
u32 sts;
......@@ -373,7 +376,7 @@ static int wait_msg_xfer_end(struct rpcif *rpc)
USEC_PER_SEC);
}
static u8 rpcif_bits_set(struct rpcif *rpc, u32 nbytes)
static u8 rpcif_bits_set(struct rpcif_priv *rpc, u32 nbytes)
{
if (rpc->bus_size == 2)
nbytes /= 2;
......@@ -386,9 +389,11 @@ static u8 rpcif_bit_size(u8 buswidth)
return buswidth > 4 ? 2 : ilog2(buswidth);
}
void rpcif_prepare(struct rpcif *rpc, const struct rpcif_op *op, u64 *offs,
void rpcif_prepare(struct device *dev, const struct rpcif_op *op, u64 *offs,
size_t *len)
{
struct rpcif_priv *rpc = dev_get_drvdata(dev);
rpc->smcr = 0;
rpc->smadr = 0;
rpc->enable = 0;
......@@ -430,8 +435,7 @@ void rpcif_prepare(struct rpcif *rpc, const struct rpcif_op *op, u64 *offs,
if (op->dummy.buswidth) {
rpc->enable |= RPCIF_SMENR_DME;
rpc->dummy = RPCIF_SMDMCR_DMCYC(op->dummy.ncycles /
op->dummy.buswidth);
rpc->dummy = RPCIF_SMDMCR_DMCYC(op->dummy.ncycles);
}
if (op->option.buswidth) {
......@@ -472,12 +476,15 @@ void rpcif_prepare(struct rpcif *rpc, const struct rpcif_op *op, u64 *offs,
}
EXPORT_SYMBOL(rpcif_prepare);
int rpcif_manual_xfer(struct rpcif *rpc)
int rpcif_manual_xfer(struct device *dev)
{
struct rpcif_priv *rpc = dev_get_drvdata(dev);
u32 smenr, smcr, pos = 0, max = rpc->bus_size == 2 ? 8 : 4;
int ret = 0;
pm_runtime_get_sync(rpc->dev);
ret = pm_runtime_resume_and_get(dev);
if (ret < 0)
return ret;
regmap_update_bits(rpc->regmap, RPCIF_PHYCNT,
RPCIF_PHYCNT_CAL, RPCIF_PHYCNT_CAL);
......@@ -587,13 +594,13 @@ int rpcif_manual_xfer(struct rpcif *rpc)
}
exit:
pm_runtime_put(rpc->dev);
pm_runtime_put(dev);
return ret;
err_out:
if (reset_control_reset(rpc->rstc))
dev_err(rpc->dev, "Failed to reset HW\n");
rpcif_hw_init(rpc, rpc->bus_size == 2);
dev_err(dev, "Failed to reset HW\n");
rpcif_hw_init(dev, rpc->bus_size == 2);
goto exit;
}
EXPORT_SYMBOL(rpcif_manual_xfer);
......@@ -640,15 +647,19 @@ static void memcpy_fromio_readw(void *to,
}
}
ssize_t rpcif_dirmap_read(struct rpcif *rpc, u64 offs, size_t len, void *buf)
ssize_t rpcif_dirmap_read(struct device *dev, u64 offs, size_t len, void *buf)
{
struct rpcif_priv *rpc = dev_get_drvdata(dev);
loff_t from = offs & (rpc->size - 1);
size_t size = rpc->size - from;
int ret;
if (len > size)
len = size;
pm_runtime_get_sync(rpc->dev);
ret = pm_runtime_resume_and_get(dev);
if (ret < 0)
return ret;
regmap_update_bits(rpc->regmap, RPCIF_CMNCR, RPCIF_CMNCR_MD, 0);
regmap_write(rpc->regmap, RPCIF_DRCR, 0);
......@@ -666,7 +677,7 @@ ssize_t rpcif_dirmap_read(struct rpcif *rpc, u64 offs, size_t len, void *buf)
else
memcpy_fromio(buf, rpc->dirmap + from, len);
pm_runtime_put(rpc->dev);
pm_runtime_put(dev);
return len;
}
......@@ -674,14 +685,17 @@ EXPORT_SYMBOL(rpcif_dirmap_read);
static int rpcif_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct platform_device *vdev;
struct device_node *flash;
struct rpcif_priv *rpc;
struct resource *res;
const char *name;
int ret;
flash = of_get_next_child(pdev->dev.of_node, NULL);
flash = of_get_next_child(dev->of_node, NULL);
if (!flash) {
dev_warn(&pdev->dev, "no flash node found\n");
dev_warn(dev, "no flash node found\n");
return -ENODEV;
}
......@@ -691,16 +705,45 @@ static int rpcif_probe(struct platform_device *pdev)
name = "rpc-if-hyperflash";
} else {
of_node_put(flash);
dev_warn(&pdev->dev, "unknown flash type\n");
dev_warn(dev, "unknown flash type\n");
return -ENODEV;
}
of_node_put(flash);
rpc = devm_kzalloc(dev, sizeof(*rpc), GFP_KERNEL);
if (!rpc)
return -ENOMEM;
rpc->base = devm_platform_ioremap_resource_byname(pdev, "regs");
if (IS_ERR(rpc->base))
return PTR_ERR(rpc->base);
rpc->regmap = devm_regmap_init(dev, NULL, rpc, &rpcif_regmap_config);
if (IS_ERR(rpc->regmap)) {
dev_err(dev, "failed to init regmap for rpcif, error %ld\n",
PTR_ERR(rpc->regmap));
return PTR_ERR(rpc->regmap);
}
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dirmap");
rpc->dirmap = devm_ioremap_resource(dev, res);
if (IS_ERR(rpc->dirmap))
return PTR_ERR(rpc->dirmap);
rpc->size = resource_size(res);
rpc->type = (uintptr_t)of_device_get_match_data(dev);
rpc->rstc = devm_reset_control_get_exclusive(dev, NULL);
if (IS_ERR(rpc->rstc))
return PTR_ERR(rpc->rstc);
vdev = platform_device_alloc(name, pdev->id);
if (!vdev)
return -ENOMEM;
vdev->dev.parent = &pdev->dev;
platform_set_drvdata(pdev, vdev);
vdev->dev.parent = dev;
rpc->dev = dev;
rpc->vdev = vdev;
platform_set_drvdata(pdev, rpc);
ret = platform_device_add(vdev);
if (ret) {
......@@ -713,9 +756,9 @@ static int rpcif_probe(struct platform_device *pdev)
static int rpcif_remove(struct platform_device *pdev)
{
struct platform_device *vdev = platform_get_drvdata(pdev);
struct rpcif_priv *rpc = platform_get_drvdata(pdev);
platform_device_unregister(vdev);
platform_device_unregister(rpc->vdev);
return 0;
}
......
drivers/memory/ti-emif-pm.c
View file @ 11c70529
......@@ -277,18 +277,13 @@ static int ti_emif_probe(struct platform_device *pdev)
int ret;
struct resource *res;
struct device *dev = &pdev->dev;
const struct of_device_id *match;
struct ti_emif_data *emif_data;
emif_data = devm_kzalloc(dev, sizeof(*emif_data), GFP_KERNEL);
if (!emif_data)
return -ENOMEM;
match = of_match_device(ti_emif_of_match, &pdev->dev);
if (!match)
return -ENODEV;
emif_data->pm_data.ti_emif_sram_config = (unsigned long)match->data;
emif_data->pm_data.ti_emif_sram_config = (unsigned long) device_get_match_data(&pdev->dev);
emif_data->pm_data.ti_emif_base_addr_virt = devm_platform_get_and_ioremap_resource(pdev,
0,
......
drivers/misc/fastrpc.c
View file @ 11c70529
......@@ -18,7 +18,7 @@
#include <linux/rpmsg.h>
#include <linux/scatterlist.h>
#include <linux/slab.h>
#include <linux/qcom_scm.h>
#include <linux/firmware/qcom/qcom_scm.h>
#include <uapi/misc/fastrpc.h>
#include <linux/of_reserved_mem.h>
......
drivers/mmc/host/sdhci-msm.c
View file @ 11c70529
......@@ -13,7 +13,7 @@
#include <linux/pm_opp.h>
#include <linux/slab.h>
#include <linux/iopoll.h>
#include <linux/qcom_scm.h>
#include <linux/firmware/qcom/qcom_scm.h>
#include <linux/regulator/consumer.h>
#include <linux/interconnect.h>
#include <linux/pinctrl/consumer.h>
......
drivers/mtd/hyperbus/rpc-if.c
View file @ 11c70529
This diff is collapsed.
drivers/net/ipa/ipa_main.c
View file @ 11c70529
......@@ -16,7 +16,7 @@
#include <linux/of_device.h>
#include <linux/of_address.h>
#include <linux/pm_runtime.h>
#include <linux/qcom_scm.h>
#include <linux/firmware/qcom/qcom_scm.h>
#include <linux/soc/qcom/mdt_loader.h>
#include "ipa.h"
......
drivers/net/wireless/ath/ath10k/qmi.c
View file @ 11c70529
This diff is collapsed.
drivers/phy/samsung/phy-exynos-dp-video.c
View file @ 11c70529
This diff is collapsed.
drivers/phy/samsung/phy-exynos-mipi-video.c
View file @ 11c70529
This diff is collapsed.
drivers/pinctrl/qcom/pinctrl-msm.c
View file @ 11c70529
This diff is collapsed.
drivers/power/supply/Kconfig
View file @ 11c70529
This diff is collapsed.
drivers/power/supply/Makefile
View file @ 11c70529
This diff is collapsed.
drivers/power/supply/qcom_battmgr.c 0 → 100644
View file @ 11c70529
This diff is collapsed.
drivers/remoteproc/qcom_q6v5_mss.c
View file @ 11c70529
This diff is collapsed.
drivers/remoteproc/qcom_q6v5_pas.c
View file @ 11c70529
This diff is collapsed.
drivers/remoteproc/qcom_wcnss.c
View file @ 11c70529
This diff is collapsed.
drivers/soc/Kconfig
View file @ 11c70529
This diff is collapsed.
drivers/soc/Makefile
View file @ 11c70529
This diff is collapsed.
drivers/soc/amlogic/meson-ee-pwrc.c
View file @ 11c70529
This diff is collapsed.
drivers/soc/apple/apple-pmgr-pwrstate.c
View file @ 11c70529
This diff is collapsed.
drivers/soc/apple/rtkit-crashlog.c
View file @ 11c70529
This diff is collapsed.
drivers/soc/apple/rtkit.c
View file @ 11c70529
This diff is collapsed.
drivers/soc/bcm/bcm2835-power.c
View file @ 11c70529
This diff is collapsed.
drivers/soc/imx/Kconfig
View file @ 11c70529
This diff is collapsed.
drivers/soc/imx/Makefile
View file @ 11c70529
This diff is collapsed.
drivers/soc/imx/imx8m-blk-ctrl.c
View file @ 11c70529
This diff is collapsed.
drivers/soc/imx/imx8mp-blk-ctrl.c
View file @ 11c70529
This diff is collapsed.
drivers/soc/imx/imx93-pd.c
View file @ 11c70529
This diff is collapsed.
drivers/soc/imx/imx93-src.c
View file @ 11c70529
This diff is collapsed.
drivers/soc/mediatek/Kconfig
View file @ 11c70529
This diff is collapsed.
drivers/soc/mediatek/Makefile
View file @ 11c70529
This diff is collapsed.
drivers/soc/mediatek/mt8186-pm-domains.h
View file @ 11c70529
This diff is collapsed.
drivers/soc/mediatek/mt8188-mmsys.h 0 → 100644
View file @ 11c70529
This diff is collapsed.
drivers/soc/mediatek/mt8188-pm-domains.h 0 → 100644
View file @ 11c70529
This diff is collapsed.
drivers/soc/mediatek/mt8195-mmsys.h
View file @ 11c70529
This diff is collapsed.
drivers/soc/mediatek/mtk-devapc.c
View file @ 11c70529
This diff is collapsed.
drivers/soc/mediatek/mtk-mmsys.c
View file @ 11c70529
This diff is collapsed.
drivers/soc/mediatek/mtk-mmsys.h
View file @ 11c70529
This diff is collapsed.
drivers/soc/mediatek/mtk-mutex.c
View file @ 11c70529
This diff is collapsed.
drivers/soc/mediatek/mtk-pm-domains.c
View file @ 11c70529
This diff is collapsed.
drivers/soc/mediatek/mtk-pm-domains.h
View file @ 11c70529
This diff is collapsed.
drivers/soc/mediatek/mtk-regulator-coupler.c 0 → 100644
View file @ 11c70529
This diff is collapsed.
drivers/soc/mediatek/mtk-svs.c
View file @ 11c70529
This diff is collapsed.
drivers/soc/nuvoton/Kconfig 0 → 100644
View file @ 11c70529
This diff is collapsed.
drivers/soc/nuvoton/Makefile 0 → 100644
View file @ 11c70529
This diff is collapsed.
drivers/soc/nuvoton/wpcm450-soc.c 0 → 100644
View file @ 11c70529
This diff is collapsed.
drivers/soc/qcom/Kconfig
View file @ 11c70529
This diff is collapsed.
drivers/soc/qcom/Makefile
View file @ 11c70529
This diff is collapsed.
drivers/soc/qcom/mdt_loader.c
View file @ 11c70529
This diff is collapsed.
drivers/soc/qcom/ocmem.c
View file @ 11c70529
This diff is collapsed.
drivers/soc/qcom/pmic_glink.c 0 → 100644
View file @ 11c70529
This diff is collapsed.
drivers/soc/qcom/pmic_glink_altmode.c 0 → 100644
View file @ 11c70529
This diff is collapsed.
drivers/soc/qcom/qcom_stats.c
View file @ 11c70529
This diff is collapsed.
drivers/soc/qcom/ramp_controller.c 0 → 100644
View file @ 11c70529
This diff is collapsed.
drivers/soc/qcom/rmtfs_mem.c
View file @ 11c70529
This diff is collapsed.
drivers/soc/qcom/rpmhpd.c
View file @ 11c70529
This diff is collapsed.
drivers/soc/qcom/rpmpd.c
View file @ 11c70529
This diff is collapsed.
drivers/soc/qcom/smd-rpm.c
View file @ 11c70529
This diff is collapsed.
drivers/soc/qcom/socinfo.c
View file @ 11c70529
This diff is collapsed.
drivers/soc/renesas/Kconfig
View file @ 11c70529
This diff is collapsed.
drivers/soc/renesas/Makefile
View file @ 11c70529
This diff is collapsed.
drivers/soc/renesas/pwc-rzv2m.c 0 → 100644
View file @ 11c70529
This diff is collapsed.
drivers/soc/renesas/r8a779g0-sysc.c
View file @ 11c70529
This diff is collapsed.
drivers/soc/sifive/Kconfig
View file @ 11c70529
This diff is collapsed.
drivers/soc/starfive/Kconfig 0 → 100644
View file @ 11c70529
This diff is collapsed.
drivers/soc/starfive/Makefile 0 → 100644
View file @ 11c70529
This diff is collapsed.
drivers/soc/starfive/jh71xx_pmu.c 0 → 100644
View file @ 11c70529
This diff is collapsed.
drivers/soc/sunxi/Kconfig
View file @ 11c70529
This diff is collapsed.
drivers/soc/sunxi/Makefile
View file @ 11c70529
This diff is collapsed.
drivers/soc/sunxi/sun20i-ppu.c 0 → 100644
View file @ 11c70529
This diff is collapsed.
drivers/soc/sunxi/sunxi_sram.c
View file @ 11c70529
This diff is collapsed.
drivers/soc/xilinx/xlnx_event_manager.c
View file @ 11c70529
This diff is collapsed.
drivers/soc/xilinx/zynqmp_pm_domains.c
View file @ 11c70529
This diff is collapsed.
drivers/spi/spi-rpc-if.c
View file @ 11c70529
This diff is collapsed.
drivers/thermal/qcom/lmh.c
View file @ 11c70529
This diff is collapsed.
drivers/ufs/host/ufs-qcom-ice.c
View file @ 11c70529
This diff is collapsed.
fs/debugfs/file.c
View file @ 11c70529
This diff is collapsed.
include/dt-bindings/arm/qcom,ids.h
View file @ 11c70529
This diff is collapsed.
include/dt-bindings/firmware/qcom,scm.h 0 → 100644
View file @ 11c70529
This diff is collapsed.
include/dt-bindings/power/allwinner,sun20i-d1-ppu.h 0 → 100644
View file @ 11c70529
This diff is collapsed.
include/dt-bindings/power/mediatek,mt8188-power.h 0 → 100644
View file @ 11c70529
This diff is collapsed.
include/dt-bindings/power/qcom-rpmpd.h
View file @ 11c70529
This diff is collapsed.
include/dt-bindings/power/r8a779g0-sysc.h
View file @ 11c70529
This diff is collapsed.
include/dt-bindings/power/starfive,jh7110-pmu.h 0 → 100644
View file @ 11c70529
This diff is collapsed.
include/dt-bindings/reset/mt8195-resets.h
View file @ 11c70529
This diff is collapsed.
include/linux/firmware/xlnx-zynqmp.h
View file @ 11c70529
This diff is collapsed.
include/linux/scmi_protocol.h
View file @ 11c70529
This diff is collapsed.
include/linux/soc/apple/rtkit.h
View file @ 11c70529
This diff is collapsed.
include/linux/soc/mediatek/infracfg.h
View file @ 11c70529
This diff is collapsed.
include/linux/soc/mediatek/mtk-mmsys.h
View file @ 11c70529
This diff is collapsed.
include/linux/soc/qcom/apr.h
View file @ 11c70529
This diff is collapsed.
include/linux/soc/qcom/pmic_glink.h 0 → 100644
View file @ 11c70529
This diff is collapsed.
include/memory/renesas-rpc-if.h
View file @ 11c70529
This diff is collapsed.
include/trace/events/scmi.h
View file @ 11c70529
This diff is collapsed.
sound/soc/qcom/qdsp6/q6core.c
View file @ 11c70529
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7